RESUMEN
Nanoplastics are anticipated to be ubiquitous in various environmental compartments. However, challenges in analytical methods hinder our understanding of risks related to specific nanplastics characteristics such as size and chemical compositions, and interactions between nanoplastics and microorganisms. In this study, we applied fit-for-purpose analytical methods and techniques to understand how nanoplastic chemical composition influences their interaction with bacteria collected from activated sludge. When exposed to polystyrene (PS) and polyvinyl chloride (PVC) nanoplastics for 5 days, the nanoplastics attached to the bacteria. Specifically, on day 1, there was a significant predominance of PS nanoplastics over PVC ones of similar size and shape, possibly due to differences in their chemical composition. After 5 days, there is a substantial decrease in nanoplastics attached to bacteria, suggesting bacterial defence mechanisms may reduce particles attachment over time. The overall bacterial community structure demonstrated a high degree of resilience. This resilience highlights the ability of microbial communities to maintain their structure despite nanoplastic stressors, as evidenced by consistent alpha diversity, PCoA, and PERMANOVA results. Understanding these mechanisms is crucial for assessing nanoplastic fate and thus environmental impacts.
RESUMEN
The real-time monitoring of the pH values of alcoholic beverages was performed with a compact wireless device based on a colorimetric detection method with the Hue (H) as the analytical signal working in a pH range of 2.50-6.50. This device represents the first colorimetric pH meter reported in the literature monitoring in real-time the pH value of colored solutions. This pH meter consists of I) a nitrocellulose membrane impregnated with a pH-sensitive gel; II) a CCD camera for color acquisition; III) an electronic board with the calibration profiles of H vs. pH, and IV) a display to read the measured pH. It was applied to the pH determination of a white wine, a prosecco white wine, and a double malt beer leading to the values of pHwine= 3.30, pHprosecco= 3.33, pHbeer = 4.29. The analytical performance is comparable to the glass electrode with an accuracy error ≤ 0.05 pH units.
Asunto(s)
Cerveza , Colorimetría , Vino , Vino/análisis , Cerveza/análisis , Colorimetría/instrumentación , Colorimetría/métodos , Concentración de Iones de HidrógenoRESUMEN
A pH colorimetric sensor array (CSA) was prepared on a nitrocellulose membrane and used for accurate pH measurement in highly concentrated saline solutions. The CSAs consisted of sensing spots made of a suitable OrMoSil polymer prepared from organo-fluorinated-silane precursors and/or organosilane with tetraethyl orthosilicate hosting an acid-base indicator. Four CSAs were prepared: D, 1F, 2F, and 3F. In D, a nonfluorinated organosilane was present. From 1F to 3F, the concentration of the fluorinated organosilane increased and improved the pH measurement accuracy in highly saline concentrations. No recalibrations were required, and the analytical signal was stable in time. D, 1F, 2F, and 3F were deposited in triplicate, and they were prepared to work in the seawater pH interval (7.50-8.50). The use of fluorinated precursors led to a lower pH prediction error and tailored the interval of the CSA at more basic pH values so that the inflection points of the sigmoidal calibrations of D, 1F, 2F, and 3F moved from 6.97 to 7.98. The overall pH prediction error was 0.10 pH (1F), 0.02 pH (2F), and 0.04 pH units (3F). The CSAs were stable, reversible, reusable, and independent of salinity (S) between 20 and 40. The performances of the CSA were compared with those of a glass electrode, whose pHNIST values were converted in the pHSWS scale through a conversion equation. Being unaffected by the typical drawback of the glass electrode, the CSAs can be used directly in seawater real samples, and it validated the proposed conversion equation.
Asunto(s)
Colorimetría , Compuestos de Organosilicio , Concentración de Iones de Hidrógeno , Agua de Mar , Electrodos , Solución SalinaRESUMEN
Seven increasing levels of water salinity from 0.029 to 0.600 M (as NaCl) were used to investigate the dependence of pH measurement, performed using colorimetric sensor arrays (CSAs), on ionic strength. The CSAs were arrays of sensing spots prepared in the form of sol-gel-embedding Bromothymol Blue (BB) and Bromocresol Green (BCG) in a porous nitrocellulose support. The support was impregnated over the entire thickness (≈100 µm), allowing for the signal (Hue) acquisition on the opposite side to the contact with the sample solution. Three CSAs were prepared, M1, M2, and M3. M1 contained a free cationic surfactant, hexadecyltrimethylammonium p-toluenesulfonate (CTApTs), for modulating the pKa of the indicators. In M2, the surfactant dimethyloctadecyl[3-(trimethoxysilyl)propyl]ammonium chloride (DTSACl) was covalently bonded to the sol-gel. M3 was prepared like M2 but using a larger amount of ethanol as the solvent for the synthesis. The modulation of the CTApTs or the DTSACl concentration enabled the tuning of the pKa. In general, the pKa modulation ability decreased with the increase in salinity. The presence of a surfactant covalently linked to the backbone partially reduced the competitiveness of the anionic species, improving the results. Nevertheless, the salt effect was still present, and a correction algorithm was required. Between pH 5.00 and 12.00, this correction could be made automatically by using spots taken as references to produce sensors independent of salinity. As the salt effect is virtually absent above 0.160 M, M2 and M3 can be used for future applications in seawater.
RESUMEN
The alloying process plays a pivotal role in the development of advanced multifunctional plasmonic materials within the realm of modern nanotechnology. However, accurate in silico predictions are only available for metal clusters of just a few nanometers, while the support of modelling is required to navigate the broad landscape of components, structures and stoichiometry of plasmonic nanoalloys regardless of their size. Here we report on the accurate calculation and conceptual understanding of the optical properties of metastable alloys of both plasmonic (Au) and magnetic (Co) elements obtained through a tailored laser synthesis procedure. The model is based on the density functional theory calculation of the dielectric function with the Hubbard-corrected local density approximation, the correction for intrinsic size effects and use of classical electrodynamics. This approach is built to manage critical aspects in modelling of real samples, as spin polarization effects due to magnetic elements, short-range order variability, and size heterogeneity. The method provides accurate results also for other magnetic-plasmonic (Au-Fe) and typical plasmonic (Au-Ag) nanoalloys, thus being available for the investigation of several other nanomaterials waiting for assessment and exploitation in fundamental sectors such as quantum optics, magneto-optics, magneto-plasmonics, metamaterials, chiral catalysis and plasmon-enhanced catalysis.
RESUMEN
The study of medicinal plants and their active compounds is relevant to maintaining knowledge of traditional medicine and to the development of new drugs of natural origin with lower environmental impact. From the seeds of the Brazilian plant Pterodon emarginatus, six different preparations were obtained: essential oil (EO), ethanol extract (EthE) prepared using the traditional method, and four extracts using solvents at different polarities, such as n-hexane, chloroform, ethyl acetate, and methanol (HexE, ChlE, EtAE, and MetE). Chemical characterization was carried out with gas chromatography, allowing the identification of several terpenoids as characteristic components. The two sesquiterpenes ß-caryophyllene and farnesol were identified in all preparations of Pterodon emarginatus, and their amounts were also evaluated. Furthermore, the total flavonoid and phenolic contents of the extracts were assessed. Successively, the antiradical activity with DPPH and ORAC assays and the influence on cell proliferation by the MTT test on the human colorectal adenocarcinoma (HT-29) cell line of the preparations and the two compounds were evaluated. Lastly, an in silico study of adsorption, distribution, metabolism, excretion, and toxicity (ADMET) showed that ß-caryophyllene and farnesol could be suitable candidates for development as drugs. The set of data obtained highlights the potential medicinal use of Pterodon emarginatus seeds and supports further studies of both plant preparations and isolated compounds, ß-caryophyllene and farnesol, for their potential use in disease with free radical involvement as age-related chronic disorders.
Asunto(s)
Fabaceae , Aceites Volátiles , Humanos , Farnesol/farmacología , Sesquiterpenos Policíclicos , Aceites Volátiles/química , Fabaceae/química , Extractos Vegetales/química , Antioxidantes/análisis , Semillas/químicaRESUMEN
Silver-111 is an attractive unconventional candidate for targeted cancer therapy as well as for single photon emission computed tomography and can be complemented by silver-103 for positron emission tomography noninvasive diagnostic procedures. However, the shortage of chelating agents capable of forming stable complexes tethered to tumor-seeking vectors has hindered their in vivo application so far. In this study, a comparative investigation of a series of sulfur-containing structural homologues, namely, 1,4,7-tris[2-(methylsulfanyl)ethyl)]-1,4,7-triazacyclononane (NO3S), 1,5,9-tris[2-(methylsulfanyl)ethyl]-1,5,9-triazacyclododecane (TACD3S), 1,4,7,10-tetrakis[2-(methylsulfanyl)ethyl]-1,4,7,10-tetraazacyclotridecane (TRI4S), and 1,4,8,11-tetrakis[2-(methylsulfanyl)ethyl]-1,4,8,11-tetraazacyclotetradecane (TE4S) was conducted to appraise the influence of different polyazamacrocyclic backbones on Ag+ complexation. The performances of these macrocycles were also compared with those of the previously reported Ag+/[111Ag]Ag+-chelator 1,4,7,10-tetrakis[2-(methylsulfanyl)ethyl]-1,4,7,10-tetraazacyclododecane (DO4S). Nuclear magnetic resonance data supported by density functional theory calculations and X-ray crystallographic results gave insights into the coordination environment of these complexes, suggesting that all of the donor atoms are generally involved in the metal coordination. However, the modifications of the macrocycle topology alter the dynamic binding of the pendant arms or the conformation of the ring around the metal center. Combined pH/pAg-potentiometric and spectroscopic experiments revealed that the 12-member N4 backbone of DO4S forms the most stable Ag+ complex while both the enlargement and the shrinkage of the macrocyclic frame dwindle the stability of the complexes. Radiolabeling experiments, conducted with reactor-produced [111Ag]Ag+, evidenced that the thermodynamic stability trend is reflected in the ligand's ability to incorporate the radioactive ion at high molar activity, even in the presence of a competing cation (Pd2+), as well as in the integrity of the corresponding complexes in human serum. As a consequence, DO4S proved to be the most favorable candidate for future in vivo applications.
Asunto(s)
Quelantes , Plata , Humanos , Quelantes/química , Plata/química , Medicina de Precisión , Radioisótopos , Espectroscopía de Resonancia MagnéticaRESUMEN
Sphene is an innovative bone graft material. The aim of this study was to investigate and compare the physicochemical and biological properties of Bio-Oss® (BO) and in-lab synthesized and processed sphene granules. BO granules of 1000-2000 µm (BO-L), 250-1000 µm (BO-S) and 100-200 µm (BO-p) for derived granules, and corresponding groups of sphene granules obtained from 3D printed blocks (SB-L, SB-S, SB-p) and foams (SF-L, SF-S and SF-p) were investigated. The following analyses were conducted: morphological analysis, specific surface area and porosity, inductively coupled plasma mass spectrometry (ICP-MS), cytotoxicity assay, Alizarin staining, bone-related gene expression, osteoblast migration and proliferation assays. All pulverized granules exhibited a similar morphology and SF-S resembled natural bone. Sphene-derived granules showed absence of micro- and mesopores and a low specific surface area. ICP-MS revealed a tendency for absorption of Ca and P for all BO samples, while sphene granules demonstrated a release of Ca. No cellular cytotoxicity was detected and osteoblastic phenotype in primary cells was observed, with significantly increased values for SF-L, SF-S, BO-L and BO-p. Further investigations are needed before clinical use can be considered.
Asunto(s)
Bioensayo , Productos Biológicos , Bovinos , Animales , Trasplante Óseo , OsteoblastosRESUMEN
Lanthanide-activated fluoride-based nanostructures are extremely interesting multifunctional tools for many modern applications in nanomedicine, e.g., bioimaging, sensing, drug delivery, and photodynamic therapy. Importantly, environmental-friendly preparations using a green chemistry approach, as hydrothermal synthesis route, are nowadays highly desirable to obtain colloidal nanoparticles, directly dispersible in hydrophilic media, as physiological solution. The nanomaterials under investigation are new KY3F10-based citrate-capped core@shell nanostructures activated with several lanthanide ions, namely, Er3+, Yb3+, Nd3+, and Gd3+, prepared as colloidal water dispersions. A new facile microwave-assisted synthesis has been exploited for their preparation, with significant reduction of the reaction times and a fine control of the nanoparticle size. These core@shell multifunctional architectures have been investigated for use as biocompatible and efficient contrast agents for optical, magnetic resonance imaging (MRI) and computerized tomography (CT) techniques. These multifunctional nanostructures are also efficient noninvasive optical nanothermometers. In fact, the lanthanide emission intensities have shown a relevant relative variation as a function of the temperature, in the visible and near-infrared optical ranges, efficiently exploiting ratiometric intensity methods for optical thermometry. Importantly, in contrast with other fluoride hosts, chemical dissolution of KY3F10 citrate-capped nanocrystals in aqueous environment is very limited, of paramount importance for applications in biological fluids. Furthermore, due to the strong paramagnetic properties of lanthanides (e.g., Gd3+), and X-ray absorption of both yttrium and lanthanides, the nanostructures under investigation are extremely useful for MRI and CT imaging. Biocompatibility studies of the nanomaterials have revealed very low cytotoxicity in dfferent human cell lines. All these features point to a successful use of these fluoride-based core@shell nanoarchitectures for simultaneous diagnostics and temperature sensing, ensuring an excellent biocompatibility.
Asunto(s)
Elementos de la Serie de los Lantanoides , Nanoestructuras , Humanos , Elementos de la Serie de los Lantanoides/química , Fluoruros/química , Nanomedicina , Luminiscencia , Nanoestructuras/químicaRESUMEN
Gestational diabetes (GDM) is one of the most common complications occurring during pregnancy. Diagnosis is performed by oral glucose tolerance test, but harmonized testing methods and thresholds are still lacking worldwide. Short-term and long-term effects include obesity, type 2 diabetes, and increased risk of cardiovascular disease. The identification and validation of sensitidve, selective, and robust biomarkers for early diagnosis during the first trimester of pregnancy are required, as well as for the prediction of possible adverse outcomes after birth. Mass spectrometry (MS)-based omics technologies are nowadays the method of choice to characterize various pathologies at a molecular level. Proteomics and metabolomics of GDM were widely investigated in the last 10 years, and various proteins and metabolites were proposed as possible biomarkers. Metallomics of GDM was also reported, but studies are limited in number. The present review focuses on the description of the different analytical methods and MS-based instrumental platforms applied to GDM-related omics studies. Preparation procedures for various biological specimens are described and results are briefly summarized. Generally, only preliminary findings are reported by current studies and further efforts are required to determine definitive GDM biomarkers.
Asunto(s)
Diabetes Mellitus Tipo 2 , Diabetes Gestacional , Embarazo , Femenino , Humanos , Diabetes Gestacional/diagnóstico , Diabetes Mellitus Tipo 2/diagnóstico , Biomarcadores , Prueba de Tolerancia a la Glucosa , Espectrometría de MasasRESUMEN
One of the most valuable practices for analyzing not-so-analytical-friendly analytes in complex, heterogenous matrices is derivatization. Availability of numerous derivatizing reagents (DRs) makes the modification of analyte more exploitable in terms of an analytical perspective. A wide array of derivatization techniques like pre or post-column, in-situ, enzymatic, ultrasound-assisted, microwave-assisted, photochemical derivatization has added much-needed methodological strength in analyzing intricate analytical matrices (food, water, and soil). In recent years, analytical chemistry has achieved greater heights through the development of new sensitive methods with simple conventional instruments like High-Performance Liquid Chromatography (HPLC) devoid of Mass detectors. The prompt availability of these straightforward instruments also makes it a favorable option for routine analysis in food, environmental, bioanalytical chemistry. Analyzing food, environmental or bioanalytical specimen has some of the most problematic aspects, like the low concentration of the analytes accompanied by not too suitable analytical properties. Even though conventional HPLC lacks the required sensitivity but merger with derivatization can lead to a remarkable increase in sensitivity. In recent years there has been a lot of application of diverse derivatizations to increase the sensitivity and selectivity of the analyte for available instruments, resulting in notable findings. Therefore, this review describes the application of derivatization principles in the analysis of analytes in food and additional matrices using conventional HPLC instruments such as HPLC-UV, HPLC-DAD, and HPLC-FD. In this article, we will briefly review the different modes and multiple types of derivatizing reagents with their mechanisms and importance for encouraging the use of established HPLC instruments.
Asunto(s)
Agua , Cromatografía Líquida de Alta Presión/métodos , Indicadores y Reactivos , Agua/químicaRESUMEN
Iron-nitrogen-carbon (Fe-N-C) materials emerged as one of the best non-platinum group material (non-PGM) alternatives to Pt/C catalysts for the electrochemical reduction of O2 in fuel cells. Co-doping with a secondary metal center is a possible choice to further enhance the activity toward oxygen reduction reaction (ORR). Here, classical Fe-N-C materials were co-doped with Sn as a secondary metal center. Sn-N-C according to the literature shows excellent activity, in particular in the fuel cell setup; here, the same catalyst shows a non-negligible activity in 0.5 M H2SO4 electrolyte but not as high as expected, meaning the different and uncertain nature of active sites. On the other hand, in mixed Fe, Sn-N-C catalysts, the presence of Sn improves the catalytic activity that is linked to a higher Fe-N4 site density, whereas the possible synergistic interaction of Fe-N4 and Sn-Nx found no confirmation. The presence of Fe-N4 and Sn-Nx was thoroughly determined by extended X-ray absorption fine structure and NO stripping technique; furthermore, besides the typical voltammetric technique, the catalytic activity of Fe-N-C catalyst was determined and also compared with that of the gas diffusion electrode (GDE), which allows a fast and reliable screening for possible implementation in a full cell. This paper therefore explores the effect of Sn on the formation, activity, and selectivity of Fe-N-C catalysts in both acid and alkaline media by tuning the Sn/Fe ratio in the synthetic procedure, with the ratio 1/2 showing the best activity, even higher than that of the iron-only containing sample (jk = 2.11 vs 1.83 A g-1). Pt-free materials are also tested for ORR in GDE setup in both performance and durability tests.
RESUMEN
Thermal modification of wood is a well-known industrial process performed to increase the durability and dimensional stability or to change the colour of natural wood. The treatment influences many other properties of wood including the emission of volatile organic compounds (VOCs). VOC release ultimately affects the quality of indoor air and the capability of having low VOC emission is often included as a key parameter for the attribution of quality labels. In the present work, wood from six tree species was subjected to different types of treatment and VOC profiling was carried out on both treated and untreated samples by means of PTR-ToF-MS. Different types of thermal treatment were tested, involving either overpressure or vacuum and the effect of different temperature profiles was evaluated. Hardwood and softwood showed different release profiles under all tested conditions: the headspace of softwood was richer in several VOCs, such as terpenes, phenols and C6-C9 aldehydes and carboxylic acids. Upon thermal treatment, terpene emissions decreased, whereas several other VOCs, such as formic acid, formaldehyde, furfural and acetic acid, were released in higher amounts. With its high sensitivity and throughput, PTR-ToF-MS appears to be a very powerful analytical tool, useful in supporting the selection of wood materials for different end uses.
Asunto(s)
Compuestos Orgánicos Volátiles , Madera , Formaldehído , AldehídosRESUMEN
The Rio defect is a coffee off-flavor associated to unpleasant medicinal, phenolic, and iodine-like notes. 2,4,6-Trichloroanisole (TCA) is the main marker of this alteration. A new approach for TCA detection in green coffee beans was evaluated using chemical ionization time-of-flight mass spectrometry and employing a Vocus ion source and ion-molecule reactor (IMR). The sample set consisted of 22 green Coffea arabica from different geographical origins, four of which presented the Rio defect according to an expert cup-tasting panel. Vocus CI-MS was able to perform TCA detection in 3 s, with a sensitivity comparable to that of a sensory panel and showed remarkably good correlation (R2 ≥ 0.9997) with SPME-GC-MS measurements carried out on coffee headspace and hydro-alcoholic extracts. The results demonstrate how the introduction of new quick and sensitive analytical tools could help provide a more comprehensive picture of the Rio coffee off-flavor.
Asunto(s)
Coffea , Anisoles , Coffea/química , Cromatografía de Gases y Espectrometría de Masas , Semillas/químicaRESUMEN
The redox activity of cytochrome c oxidase (COX), the terminal oxidase of the mitochondrial respiratory chain (MRC), depends on the incorporation of iron and copper into its catalytic centers. Many mitochondrial proteins have specific roles for the synthesis and delivery of metal-containing cofactors during COX biogenesis. In addition, a large set of different factors possess other molecular functions as chaperones or translocators that are also necessary for the correct maturation of these complexes. Pathological variants in genes encoding structural MRC subunits and these different assembly factors produce respiratory chain deficiency and lead to mitochondrial disease. COX deficiency in Drosophila melanogaster, induced by downregulated expression of three different assembly factors and one structural subunit, resulted in decreased copper content in the mitochondria accompanied by different degrees of increase in the cytosol. The disturbances in metal homeostasis were not limited only to copper, as some changes in the levels of cytosolic and/or mitochondrial iron, manganase and, especially, zinc were observed in several of the COX-deficient groups. The altered copper and zinc handling in the COX defective models resulted in a transcriptional response decreasing the expression of copper transporters and increasing the expression of metallothioneins. We conclude that COX deficiency is generally responsible for an altered mitochondrial and cellular homeostasis of transition metals, with variations depending on the origin of COX assembly defect.
RESUMEN
Metals are an important atmospheric aerosol component; their impacts on health and the environment depend also on their solubility, dissolution kinetics and chemical form in which they are present in the aerosol (e.g., oxidation state, inorganic salt or oxide/hydroxide, organic complex). In this study, we investigated the impact of fog processing on the solubility and dissolution of metals in PM2.5 samples collected in an urban background site in Padova (Italy). For each sample, we determined the solubility and dissolution kinetics of 17 elements in a solution simulating fog water in the winter season in the Po Valley (pH 4.7, T 5 °C, and water content â¼0.5 g m-3). We also determined water-soluble inorganic and organic compounds having ligand properties. We used the model E-AIM IV to calculate the aerosol liquid water (ALW) content and pH, and we used the model Visual MinteQ to determine the speciation picture of the most important elements under conditions of both deliquescent aerosol (ALW and pH calculated using E-AIM IV, ambient temperature) and simulated fog. We found that the dissolution of Al, Cu, and Fe metal ions, predicted to be largely coordinated with organic compounds under fog conditions, was either immediate or considerably faster in samples collected on days with observed fog events compared with those collected on days having drier conditions. For readily soluble elements, such as As, Cd, Cr, Sr, and Zn, such an effect was not observed. Our study highlights the importance of coordination chemistry in atmospheric aerosol and fog in determining the bioavailability of particle-bound metals.
Asunto(s)
Contaminantes Atmosféricos , Metales , Aerosoles/química , Contaminantes Atmosféricos/análisis , Cinética , Metales/análisis , Compuestos Orgánicos/química , Solubilidad , Agua/análisisRESUMEN
Limits of Matrix-Assisted Laser Desorption Ionization (MALDI) mass spectrometry (MS) in the study of small molecules are due to matrix-related interfering species in the low m/z range. Single-walled carbon nanohorns (SWCNH) were here evaluated as a specific surface for the rapid analysis of amino acids and lipids by Surface-Assisted Laser Desorption Ionization (SALDI). The method was optimized for detecting twenty amino acids, mainly present as cationized species, with the [M+K]+ response generally 2-time larger than the [M+Na]+ one. The [M+Na]+/[M+K]+ signals ratio was tentatively correlated with the molecular weight, dipole moment and binding affinity, to describe the amino acids' coordination ability. The SWCNH-based surface was also tested for analyzing triglycerides in olive oil samples, showing promising results in determining the percentage composition of fatty acids without any sample treatment. Results indicated that SWCNH is a promising substrate for the SALDI-MS analysis of low molecular weight compounds with different polarities, enlarging the analytical platforms for MALDI applications.
Asunto(s)
Carbono , Rayos Láser , Aminoácidos , Carbono/química , Peso Molecular , Espectrometría de Masa por Láser de Matriz Asistida de Ionización Desorción/métodosRESUMEN
Iron deficiency is one of the most prevalent nutritional disorders worldwide. The standard treatment involves iron supplementation, but this task is challenging because of poor solubility and organoleptic issues. Moreover, the need to increase iron bioavailability represents a challenge for treating iron-related disorders. In this study, gastroresistance and iron intestinal absorption of an innovative granular formulation composed of ferric pyrophosphate, modified starch and phospholipids branded as Ferro Fosfosoma® was investigated. Gastroresistant properties were studied using standard protocols, and a bioaccessible fraction was obtained by exposing a food supplement to in vitro digestion. This fraction was used for investigating iron absorption in Caco-2 and human follicle-associated intestinal epithelium (FAE) models. Ferro Fosfosoma® showed an improved resistance to gastric digestion and higher intestinal absorption than ferric pyrophosphate salt used as a control in both models. In the FAE model, Ferro Fosfosoma® induces larger iron absorption than in the Caco-2 monolayer, most likely due to the transcytosis ability of M cells. The larger iron absorption in the Ferro Fosfosoma®-treated FAE model corresponds to higher ferritin level, proving physiological iron handling that was once delivered by granular formulation. Finally, the formulation did not induce any alterations in viability and barrier integrity. To conclude, Ferro Fosfosoma® favors iron absorption and ferritin expression, while preserving any adverse effects.
RESUMEN
Nitrogen doping has been always regarded as one of the major factors responsible for the increased catalytic activity of Fe-N-C catalysts in the oxygen reduction reaction, and recently, sulfur has emerged as a co-doping element capable of increasing the catalytic activity even more because of electronic effects, which modify the d-band center of the Fe-N-C catalysts or because of its capability to increase the Fe-Nx site density (SD). Herein, we investigate in detail the effect of sulfur doping of carbon support on the Fe-Nx site formation and on the textural properties (micro- and mesopore surface area and volume) in the resulting Fe-N-C catalysts. The Fe-N-C catalysts were prepared from mesoporous carbon with tunable sulfur doping (0-16 wt %), which was achieved by the modulation of the relative amount of sucrose/dibenzothiophene precursors. The carbon with the highest sulfur content was also activated through steam treatment at 800 °C for different durations, which allowed us to modulate the carbon pore volume and surface area (1296-1726 m2 g-1). The resulting catalysts were tested in O2-saturated 0.5 M H2SO4 electrolyte, and the site density (SD) was determined using the NO-stripping technique. Here, we demonstrate that sulfur doping has a porogenic effect increasing the microporosity of the carbon support, and it also facilitates the nitrogen fixation on the carbon support as well as the formation of Fe-Nx sites. It was found that the Fe-N-C catalytic activity [E1/2 ranges between 0.609 and 0.731 V vs reversible hydrogen electrode (RHE)] does not directly depend on sulfur content, but rather on the microporous surface and therefore any electronic effect appears not to be determinant as confirmed by X-ray photoemission spectroscopy (XPS). The graph reporting Fe-Nx SD versus sulfur content assumes a volcano-like shape, where the maximum value is obtained for a sulfur/iron ratio close to 18, i.e., a too high or too low sulfur doping has a detrimental effect on Fe-Nx formation. However, it was highlighted that the increase of Fe-Nx SD is a necessary but not sufficient condition for increasing the catalytic activity of the material, unless the textural properties are also optimized, i.e., there must be an optimized hierarchical porosity that facilitates the mass transport to the active sites.