RESUMEN
A needle-water DC microplasma system working at atmospheric pressure in N2/O2 gas mixtures is used to study the fundamental mechanisms of nitrate/nitrite synthesis in highly complex and yet little-known plasma-water systems. Plasma properties are investigated by means of optical emission spectroscopy while the activated water is analyzed following the treatment using ionic chromatography and UV-Vis absorbance spectroscopy. Experiments highlight that the energy efficiency and selectivity of the process are influenced by the oxygen content and the plasma-induced water heating, with strong differences when the water surface is the anode or the cathode electrode. Nitrates are successfully synthesized without residual nitrites in the solution with a comparatively higher energy efficiency when the water is the cathode. The possible reactions involved in the gas phase and aqueous phase chemistry are presented and future scope for the optimization of the system is discussed.
RESUMEN
The plasma based synthesis of thin films is frequently used to deposit ultra-thin and pinhole-free films on a wide class of different substrates. However, the synthesis of thin films by means of low temperature plasmas is rather complex due to the great number of different species (neutrals, radicals, ions) that are potentially involved in the deposition process. This contribution deals with polymerization processes in a capacitively coupled discharge operated in a mixture of argon and aniline where the latter is a monomer, which is used for the production of plasma-polymerized polyaniline, a material belonging to the class of conductive polymers. This work will present a particular experimental approach that allows to (partially) distinguish the contribution of different species to the film growth and thus to control to a certain extent the properties of the resulting material. The control of the species flux emerging from the plasma and contributing to the film growth also sheds new light on the deposition process, in particular with respect to the role of the ion component. The analysis of the produced films has been performed by means of Fourier Transform Infrared spectroscopy (FTIR) and Near Edge X-ray Absorption Fine Structure spectroscopy (NEXAFS).
RESUMEN
Purpose: Statistical shape modeling provides a powerful tool for describing and analyzing human anatomy. By linearly combining the variance of the shape of a population of a given anatomical entity, statistical shape models (SSMs) identify its main modes of variation and may approximate the total variance of that population to a selected threshold, while reducing its dimensionality. Even though SSMs have been used for over two decades, they lack in characterization of their goodness of prediction, in particular when defining whether these models are actually representative for a given population. Methods: The current paper presents, to the authors' knowledge, the most extent lower limb anatomy shape model considering the pelvis, femur, patella, tibia, fibula, talus, and calcaneum to date. The present study includes the segmented training shapes (n = 542) obtained from 271 lower limb CT scans. The different models were evaluated in terms of accuracy, compactness, generalizability as well as specificity. Results: The size of training samples needed in each model so that it can be considered population covering was estimated to approximate around 200 samples, based on the generalizability properties of the different models. Simultaneously differences in gender and patterns in left-right asymmetry were identified and characterized. Size was found to be the most pronounced sexual discriminator whereas intra-individual variations in asymmetry were most pronounced at the insertion site of muscles. Conclusion: For models aimed at population covering descriptive studies, the number of training samples required should amount a sizeable 200 samples. The geometric morphometric method for sex discrimination scored excellent, however, it did not largely outperformed traditional methods based on discrete measures.
RESUMEN
BACKGROUND: The accurate estimation of a muscle's line of action is a fundamental requirement in computational modelling. We present a novel anatomical muscle wrapping technique and demonstrate its clinical use on the evaluation of the Psoas muscle mechanics in hip arthroplasty. METHODS: A volume preserving, spring model to parameterize muscle anatomy changes during motion is presented. Validation was performed by a CT scan of a cadaver model in multiple positions. The predicted psoas musculotendinous path was compared with the actual imaging findings. In a second stage, psoas kinetics were compared between a conventional versus a resurfacing hip arthroplasty during gait. FINDINGS: Anatomy prediction error was found to be 2.12â¯mm on average (SD 1.34â¯mm). When applied to psoas mechanics during walking, the muscle was found to wrap predominantly around the femoral head providing a biomechanically efficient and nearly constant moment arm for flexion during the entire gait cycle. However, this advantage was found to be lost in small diameter hip arthroplasty designs resulting in an important mechanical disadvantage. The moment arm for flexion, was on average 36% (SD 0.03%) lower in the small diameter conventional hip arthroplasty as compared to the large diameter head of the hip resurfacing and this difference was highly significant. (pâ¯<â¯0.001). INTERPRETATION: Despite the shortcomings of an "in silico" and cadaveric study, our findings are in accordance with previous clinical and gait studies. Furthermore, the findings are strongly in favour of large diameter implant designs, warranting their further development and optimisation.
Asunto(s)
Artroplastia de Reemplazo de Cadera/instrumentación , Cabeza Femoral/cirugía , Prótesis de Cadera , Músculos Psoas/cirugía , Anciano , Artroplastia de Reemplazo de Cadera/métodos , Cadáver , Simulación por Computador , Femenino , Marcha , Articulación de la Cadera/cirugía , Humanos , Músculos Psoas/anatomía & histología , Músculos Psoas/fisiología , Rango del Movimiento Articular , Tendones/fisiología , Tomografía Computarizada por Rayos XRESUMEN
Sitting is part of our daily work and leisure activities and can be performed in different configurations. To date, the impact of different sitting configurations on hip joint loading has not been studied. We therefore evaluated the hip joint reaction force (HJRF) and hip flexion angle in a virtual representative male Caucasian population by means of musculoskeletal modelling of three distinct sitting configurations: a simple chair, a car seat and a kneeling chair configuration. The observed median HJRF in relation to body weight and hip flexion angle, respectively, was 22.3% body weight (%BW) and 63° for the simple chair, 22.5%BW and 79° for the car seat and 8.7%BW and 50° for the kneeling chair. Even though the absolute values of HJRF are low compared to the forces generated during dynamic activities, a relative reduction of over 50% in HJRF was observed in the kneeling chair configuration. Second, the hip flexion angles were both in the kneeling chair (-29°) and simple chair configuration (-16°) lower compared to the car seat and, as such, did not reach the threshold value for femoroacetabular conflict. In conclusion, the kneeling chair appears to hold the greatest potential as an ergonomic sitting configuration for the hip joint.
Asunto(s)
Articulación de la Cadera/fisiología , Postura/fisiología , Rango del Movimiento Articular/fisiología , Adulto , Fenómenos Biomecánicos , Simulación por Computador , Humanos , MasculinoRESUMEN
Some infections require prolonged parenteral antimicrobial therapy, which can be continued in an outpatient setting. The Ghent University Hospital has fifteen years of experience with Outpatient Parenteral Antimicrobial Therapy [OPAT) in the patient own home setting. As a quality improvement initiative, this process was critically reviewed in a multidisciplinary approach. Several challenges and barriers were identified, including regulatory obstacles for OPAT in Belgium, such as Lack of uniformity in ambulatory reimbursement of parenteral antimicrobials. There is no financial incentive for the patient with OPAT, as costs for the patient of outpatient therapy can be higher as compared with hospitalization. Other barriers include delayed approval of the certificate for reimbursement, low availability of medicines in the community pharmacies and limited knowledge of the medical devices for administration in ambulatory setting. All critical steps in the revised OPAT program are summarized in a flowchart with a checklist for all stakeholders. Firstly, a list with specific criteria to include patients in an OPAT program is provided. Secondly, the Multidisciplinary Infection Team received a formal mandate to review all eligible OPAT patients. In order to select the most appropriate catheter a decision tree was developed and standardized packages with medical devices were developed. Thirdly, patients receive oral and written information about the treatment with practical and financial implications. Fourthly, information is provided towards the general practitioners, community pharmacists and home care nurses. Standardization of the OPAT-program aims at improving quality and safety of intravenous antimicrobial therapy in the home setting.
Asunto(s)
Atención Ambulatoria/organización & administración , Antibacterianos/uso terapéutico , Antibacterianos/administración & dosificación , Bélgica , Humanos , Infusiones Parenterales , Pacientes AmbulatoriosRESUMEN
BACKGROUND: Trochlear dysplasia is known as the primary predisposing factor for patellar dislocation. Current methods to describe trochlear dysplasia are mainly qualitative or based on a limited number of discrete measurements. The purpose of this study is to apply statistical shape analysis to take the full geometrical complexity of trochlear dysplasia into account. METHODS: Statistical shape analysis was applied to 20 normal and 20 trochlear dysplastic distal femur models, including the cartilage. RESULTS: This study showed that the trochlea was anteriorized, proximalized and lateralized and that the mediolateral width and the notch width were decreased in the trochlear dysplastic femur compared to the normal femur. The first three principal components of the trochlear dysplastic femurs, accounting for 79.7% of the total variation, were size, sulcus angle and notch width. Automated classification of the trochlear dysplastic and normal femora achieved a sensitivity of 85% and a specificity of 95%. CONCLUSIONS: This study shows that shape analysis is an outstanding method to visualise the location and magnitude of shape abnormalities. Improvement of automated classification and subtyping within the trochlear dysplastic group are expected when larger training sets are used. CLINICAL RELEVANCE: Classification of trochlear dysplasia, especially borderline cases may be facilitated by automated classification. Furthermore, the identification of a decreased notch width in association with an increased sulcus angle can also contribute to the diagnosis of trochlear dysplasia.
Asunto(s)
Fémur/anomalías , Fémur/diagnóstico por imagen , Imagenología Tridimensional , Modelos Estadísticos , Adolescente , Adulto , Cartílago Articular/diagnóstico por imagen , Estudios de Casos y Controles , Análisis Discriminante , Femenino , Humanos , Procesamiento de Imagen Asistido por Computador , Masculino , Persona de Mediana Edad , Tomografía Computarizada Multidetector , Articulación Patelofemoral/anomalías , Articulación Patelofemoral/diagnóstico por imagen , Análisis de Componente Principal , Adulto JovenRESUMEN
BACKGROUND: There is growing evidence that femoroacetabular impingement is a potentially important risk factor for the development of early idiopathic osteoarthritis in the nondysplastic hip. Understanding of affected joint kinematics is a basic prerequisite in the evaluation of mechanical disorders in a clinical and research oriented setting. The aim of the present study was to compare pelvifemoral kinematics between subjects diagnosed with femoroacetabular impingement and healthy controls. METHODS: The authors collected motion data of the femur and pelvis on a total of 43 hips - 19 cam impingement hips and 24 healthy controls - using a validated electromagnetic tracking device. The pelvifemoral rhythm in supine position was defined during both active and passive hip flexion and statistically compared between both groups. FINDINGS: A significant increase in posterior pelvic rotation was observed during active hip flexion in the femoroacetabular impingement group compared with the control group (P<0.001). During passive hip flexion, however, posterior pelvic rotation between the impingement group and the controls did not differ significantly (P=0.628). INTERPRETATION: Posterior pelvic rotation during active high-end hip flexion is increased in femoroacetabular impingement, indicating the presence of an active compensational mechanism that decreases the extent of harmful joint conflict during high-flexion activities.
Asunto(s)
Pinzamiento Femoroacetabular/fisiopatología , Fémur/fisiopatología , Articulación de la Cadera/fisiopatología , Huesos Pélvicos/fisiopatología , Rango del Movimiento Articular/fisiología , Adulto , Fenómenos Biomecánicos/fisiología , Estudios de Casos y Controles , Humanos , Masculino , Rotación , Adulto JovenRESUMEN
OBJECTIVE: Hip labrum pathology has only begun to emerge as a significant source of groin pain in the last decade since the development of hip arthroscopy. Few data are available on the anatomy, histology and function of this structure. Moreover, no metabolic data exist at cellular level. The aim of this study was to characterize extracellular matrix (ECM) genes and pro-inflammatory mediators expressed by these cells. METHODS: Isolated human acetabular labrum cells were cultured in alginate beads for 10 days and additionally stimulated with interleukin (IL)-1 for 24 h. Gene expression levels and secretion of different ECM genes, enzymes and cytokines were examined by quantitative polymerase chain reaction (qPCR) and enzyme-linked immunosorbent assay (ELISA) to assess the metabolic characteristics of labrum cells. Articular chondrocytes and meniscus cells served as controls. RESULTS: Labrum cells expressed high levels of COL1A1 and low levels of COL2A1, aggrecan and SOX-9 compared to chondrocytes. However, COL2A1 was more expressed by labrum cells than by meniscus cells. The expression of matrix metalloproteinase (MMP)-1/-2/-9, ADAMTS-4 and IL-6 was significantly higher in labrum cells than in chondrocytes. IL-1 suppressed the ECM gene expression levels of labrum cells, but increased the expression levels and release of MMP-1/-3/-9/-13 and ADAMTS-4 and IL-6 by these cells. Remarkably, MMP-9 was only significantly upregulated in acetabular labrum cells. CONCLUSIONS: The findings in this study demonstrated that the acetabular labrum is populated with unique highly active fibrochondrocyte-like cells. These cells are capable of expressing and releasing pro-inflammatory enzymes and cytokines and react to a pro-inflammatory stimulus. In this way, they contribute obviously to disturbed tissue function in hip labrum pathology.
Asunto(s)
Acetábulo/citología , Acetábulo/metabolismo , Acetábulo/efectos de los fármacos , Anciano , Anciano de 80 o más Años , Cartílago Articular/citología , Cartílago Articular/metabolismo , Forma de la Célula/efectos de los fármacos , Células Cultivadas , Condrocitos/metabolismo , Matriz Extracelular/efectos de los fármacos , Matriz Extracelular/metabolismo , Proteínas de la Matriz Extracelular/biosíntesis , Proteínas de la Matriz Extracelular/genética , Femenino , Perfilación de la Expresión Génica/métodos , Regulación de la Expresión Génica/efectos de los fármacos , Humanos , Mediadores de Inflamación/metabolismo , Interleucina-1/farmacología , Masculino , Meniscos Tibiales/citología , Meniscos Tibiales/metabolismo , Persona de Mediana EdadRESUMEN
The aim of this study was to determine the accuracy of registration and the precision of the resection volume in navigated hip arthroscopy for cam-type femoroacetabular impingement, using imageless and image-based registration. A virtual cam lesion was defined in 12 paired cadaver hips and randomly assigned to either imageless or image-based (three-dimensional (3D) fluoroscopy) navigated arthroscopic head-neck osteochondroplasty. The accuracy of patient-image registration for both protocols was evaluated and post-operative imaging was performed to evaluate the accuracy of the surgical resection. We found that the estimated accuracy of imageless registration in the arthroscopic setting was poor, with a mean error of 5.6 mm (standard deviation (sd) 4.08; 95% confidence interval (CI) 4.14 to 7.19). Because of the significant mismatch between the actual position of the probe during surgery and the position of that probe as displayed on the navigation platform screen, navigated femoral osteochondroplasty was physically impossible. The estimated accuracy of image-based registration by means of 3D fluoroscopy had a mean error of 0.8 mm (sd 0.51; 95% CI 0.56 to 0.94). In terms of the volume of bony resection, a mean of 17% (sd 11; -6% to 28%) more bone was resected than with the virtual plan (p = 0.02). The resection was a mean of 1 mm deeper (sd 0.7; -0.3 to 1.6) larger than on the original virtual plan (p = 0.02). In conclusion, given the limited femoral surface that can be reached and digitised during arthroscopy of the hip, imageless registration is inaccurate and does not allow for reliable surgical navigation. However, image-based registration does acceptably allow for guided femoral osteochondroplasty in the arthroscopic management of femoroacetabular impingement.
Asunto(s)
Artroscopía/métodos , Pinzamiento Femoroacetabular/diagnóstico por imagen , Pinzamiento Femoroacetabular/cirugía , Radiografía Intervencional/métodos , Cirugía Asistida por Computador/métodos , Cadáver , Femenino , Cabeza Femoral/diagnóstico por imagen , Cabeza Femoral/cirugía , Cuello Femoral/diagnóstico por imagen , Cuello Femoral/cirugía , Fluoroscopía/métodos , Humanos , Imagenología Tridimensional/métodos , MasculinoRESUMEN
The aim of this review is to evaluate the current available literature evidencing on peri-articular hip endoscopy (the third compartment). A comprehensive approach has been set on reports dealing with endoscopic surgery for recalcitrant trochanteric bursitis, snapping hip (or coxa-saltans; external and internal), gluteus medius and minimus tears and endoscopy (or arthroscopy) after total hip arthroplasty. This information can be used to trigger further research, innovation and education in extra-articular hip endoscopy.
RESUMEN
In the field of hip resurfacing arthroplasty, accurate femoral component placement is important to achieving a positive outcome and implant survival in both the short and long term. In this study, femoral component placement was defined preoperatively using virtual computed tomography-based surgical simulation of a classical posterior surgical approach. Custom-made surgical drill guides were produced to reproduce the surgical plan in the operating room. We first developed a custom-made guide for guide-wire placement to position the femoral resurfacing component. Then, to assess the accuracy in vivo, the custom-made guide was evaluated in five patients with normal anatomy. The first hypothesis of this patient study was that the use of custom-made neck guides would allow for an average accuracy within the range of ± 4° for the drill path and ± 4 mm for the entry point of the guide-wire. A second hypothesis was that three-dimensional preoperative planning would enable the prediction of an implant size differing by a maximum of one size from the size eventually implanted. The presented hip resurfacing guide performed well in terms of fit, stability and accuracy. The in vivo accuracy study revealed an accuracy of 4.05 ± 1.84° for the drill path and 2.73 ± 1.97 mm for the entry point of the guide-wire. The predicted component sizes and the implanted component sizes differed maximally by one size, confirming our hypothesis. We conclude that these preliminary data are promising, but require further validation in a full clinical setting in larger patient groups.
Asunto(s)
Artroplastia de Reemplazo de Cadera/instrumentación , Fémur/cirugía , Articulación de la Cadera/cirugía , Imagenología Tridimensional/instrumentación , Cirugía Asistida por Computador/instrumentación , Artroplastia de Reemplazo de Cadera/métodos , Fenómenos Biomecánicos , Cadáver , Formación de Concepto , Fémur/anatomía & histología , Articulación de la Cadera/patología , Humanos , Imagenología Tridimensional/métodos , Modelos Anatómicos , Periodo Posoperatorio , Reproducibilidad de los Resultados , Cirugía Asistida por Computador/métodosRESUMEN
There is growing evidence that femoroacetabular impingement (FAI) is a probable risk factor for the development of early osteoarthritis in the nondysplastic hip. As FAI arises with end range of motion activities, measurement errors related to skin movement might be higher than anticipated when using previously reported methods for kinematic evaluation of the hip. We performed an in vitro validation and reliability study of a noninvasive method to define pelvic and femur positions in end range of motion activities of the hip using an electromagnetic tracking device. Motion data, collected from sensors attached to the bone and skin of 11 cadaver hips, were simultaneously obtained and compared in a global reference frame. Motion data were then transposed in the hip joint local coordinate systems. Observer-related variability in locating the anatomical landmarks required to define the local coordinate system and variability of determining the hip joint center was evaluated. Angular root mean square (RMS) differences between the bony and skin sensors averaged 3.2° (SD 3.5°) and 1.8° (SD 2.3°) in the global reference frame for the femur and pelvic sensors, respectively. Angular RMS differences between the bony and skin sensors in the hip joint local coordinate systems ranged at end range of motion and dependent on the motion under investigation from 1.91 to 5.81°. The presented protocol for evaluation of hip motion seems to be suited for the 3-D description of motion relevant to the experimental and clinical evaluation of femoroacetabular impingement.
Asunto(s)
Pinzamiento Femoroacetabular/diagnóstico , Articulación de la Cadera/fisiopatología , Rango del Movimiento Articular/fisiología , Campos Electromagnéticos , Pinzamiento Femoroacetabular/fisiopatología , Humanos , Reproducibilidad de los Resultados , PielRESUMEN
PURPOSE: Determining the etiology of persistent groin pain after hip resurfacing arthroplasty (HRA) can be very challenging, even for the experienced surgeon. The purpose of the present study was to evaluate the use of hip arthroscopy as a diagnostic and therapeutic tool for the painful hip following resurfacing arthroplasty. METHODS: In the present paper, the indications for arthroscopy and the arthroscopic findings in 15 patients with persistent and incapacitating groin pain following HRA are described. In all patients, nonsurgical diagnostic investigations such as ultrasound and radiography, blood sample analysis, and technetium and leukocyte-labeled scanning were inconclusive so that a definite diagnosis could not be established. RESULTS: In seven patients, synovial biopsies were taken arthroscopically to rule out metal sensitivity, low-grade infection, or excessive metal wear. A definite diagnosis from histological evaluation could be made in 5 out of the 7 patients. Five patients were clinical suspicious of iliopsoas tendinitis. Diagnostic arthroscopy and histological analysis of the synovial samples provided an alternative diagnosis in 2 out of the 5 patients. Three patients underwent femoral osteoplasty for impingement due to reduced anterior femoral offset with subsequent symptom relief. CONCLUSION: Hip arthroscopy after HRA is a valuable diagnostic alternative to open procedures in case of persistent groin pain, when noninvasive investigations fail to explain the symptoms. Multiple tissue samples should always be taken for histological examination and culture, as they are crucial in the final identification of the origin of the complaints.
Asunto(s)
Artroplastia de Reemplazo de Cadera/efectos adversos , Artroscopía/métodos , Dolor Postoperatorio/diagnóstico , Dolor Postoperatorio/cirugía , Adulto , Anciano , Artralgia/etiología , Artralgia/cirugía , Artroplastia/métodos , Artroplastia de Reemplazo de Cadera/métodos , Estudios de Cohortes , Femenino , Estudios de Seguimiento , Humanos , Masculino , Persona de Mediana Edad , Dimensión del Dolor , Recuperación de la Función , Reoperación/métodos , Estudios Retrospectivos , Medición de Riesgo , Índice de Severidad de la Enfermedad , Resultado del TratamientoRESUMEN
Several theoretical models have shown that the range of motion of the hip joint is impaired in patients with femoroacetabular impingement, and that the acetabular cartilage is at risk of being damaged as a result of abnormal shear stresses, even during normal everyday activities. Computer aided technologies might add to the early diagnosis and adequate treatment of such lesions. This paper describes the technique, theories and algorithms we have developed for patient-specific detection, analysis and computer aided surgery of femoroacetabular impingement. Currently available models applicable to femoroacetabular impingement offer modeling based on collision analysis of a constrained hip joint. Such an approach implies that neither the femur nor the acetabulum can be analyzed completely separately for the presence of structural lesions responsible for the impingement problem. Moreover, a constrained model does not allow for comprehensive prediction of the possible locations and extent of secondary cartilage lesions (so-called contre-coup lesions) of the posterior acetabulum opposite the anterior impingement site. We report a new technique for the subject-specific morphological analysis of the proximal femur, acetabulum and hip joint. The technique offers a number of advantages compared to currently used techniques for the diagnosis and evaluation of hip impingement, and has direct orthopaedic applications as it allows computer aided planning and minimally invasive surgery for patients with femoroacetabular impingement.
Asunto(s)
Diagnóstico por Computador/instrumentación , Pinzamiento Femoroacetabular/diagnóstico , Pinzamiento Femoroacetabular/cirugía , Imagenología Tridimensional/métodos , Cirugía Asistida por Computador/instrumentación , Algoritmos , Simulación por Computador , Diagnóstico por Computador/métodos , Estudios de Factibilidad , Pinzamiento Femoroacetabular/patología , Fémur/patología , Fémur/cirugía , Humanos , Imagenología Tridimensional/instrumentación , Cirugía Asistida por Computador/métodosAsunto(s)
Cromo/análisis , Cobalto/análisis , Prótesis de Cadera , Falla de Prótesis , Adolescente , Adulto , Anciano , Artroplastia de Reemplazo de Cadera/instrumentación , Cromo/sangre , Aleaciones de Cromo , Cobalto/sangre , Femenino , Humanos , Iones , Masculino , Persona de Mediana Edad , Reoperación , Líquido Sinovial/químicaRESUMEN
We examined the relationships between the serum levels of chromium and cobalt ions and the inclination angle of the acetabular component and the level of activity in 214 patients implanted with a metal-on-metal resurfacing hip replacement. Each patient had a single resurfacing and no other metal in their body. All serum measurements were performed at a minimum of one year after operation. The inclination of the acetabular component was considered to be steep if the abduction angle was greater than 55 degrees. There were significantly higher levels of metal ions in patients with steeply-inclined components (p = 0.002 for chromium, p = 0.003 for cobalt), but no correlation was found between the level of activity and the concentration of metal ions. A highly significant (p < 0.001) correlation with the arc of cover was found. Arcs of cover of less than 10 mm were correlated with a greater risk of high concentrations of serum metal ions. The arc of coverage was also related to the design of the component and to size as well as to the abduction angle of the acetabular component. Steeply-inclined acetabular components, with abduction angles greater than 55 degrees, combined with a small size of component are likely to give rise to higher serum levels of cobalt and chromium ions. This is probably due to a greater risk of edge-loading.
Asunto(s)
Acetábulo/cirugía , Artroplastia de Reemplazo de Cadera/métodos , Cromo/sangre , Cobalto/sangre , Articulación de la Cadera/fisiología , Prótesis de Cadera/efectos adversos , Acetábulo/diagnóstico por imagen , Acetábulo/fisiopatología , Adolescente , Adulto , Anciano , Artroplastia de Reemplazo de Cadera/efectos adversos , Análisis de Falla de Equipo , Femenino , Articulación de la Cadera/diagnóstico por imagen , Humanos , Masculino , Persona de Mediana Edad , Diseño de Prótesis , Falla de Prótesis , RadiografíaRESUMEN
The purpose of this study was to compare clinical outcomes between ceramic-on-ceramic total hip replacement and metal-on-metal hip resurfacing arthroplasty in comparable groups of young active patients at a 3- to 6-year follow-up. The first 250 patients (mean age, 49.54 years) of a series of 930 resurfacing arthroplasties were compared clinically and functionally with a series of 190 patients (mean age, 46.76 years) with ceramic-on-ceramic uncemented total hip prostheses. The total Harris hip score was 97.9 in the resurfacing group vs 92.1 in the ceramic group. In the resurfacing group, 60.71% had a strenuous activity level vs 30.43% in the ceramic group.
Asunto(s)
Artroplastia de Reemplazo de Cadera/instrumentación , Cerámica , Prótesis de Cadera , Metales , Diseño de Prótesis , Actividades Cotidianas , Adolescente , Adulto , Anciano , Artritis Reumatoide/fisiopatología , Artritis Reumatoide/cirugía , Artroplastia de Reemplazo de Cadera/métodos , Análisis de Falla de Equipo , Femenino , Necrosis de la Cabeza Femoral/fisiopatología , Necrosis de la Cabeza Femoral/cirugía , Indicadores de Salud , Lesiones de la Cadera/fisiopatología , Lesiones de la Cadera/cirugía , Articulación de la Cadera/fisiopatología , Humanos , Masculino , Persona de Mediana Edad , Osteoartritis de la Cadera/fisiopatología , Osteoartritis de la Cadera/cirugía , Estudios Prospectivos , Falla de Prótesis , Recuperación de la Función , Adulto JovenRESUMEN
Early excision of heterotopic ossification was performed in 8 patients at an average of 10.2 months after total hip arthroplasty. All patients received a single irradiation dose of 7Gy the day before the operation, followed by oral indomethacin (3x25mg/day) for six weeks. Continuous passive mobilization under epidural anesthesia was started immediately post-operatively. At an average follow-up of 2 years none of them had radiographic or clinical evidence of recurrence. Consequently we recommend resection as soon as there are severe clinical implications, even when bone scans indicate immaturity of the heterotopic ossification and provided that the resection is combined with proper non-surgical treatment consisting of irradiation and oral indomethacin and immediate extensive rehabilitation program. (Hip International 2002; 4: 383-7).