On the intramolecular vibrational energy redistribution dynamics of aromatic complexes: A comparative study on C6H6-C6H5Cl, C6H6-C6H3Cl3, C6H6-C6Cl6 and C6H6-C6H5F, C6H6-C6H3F3, C6H6-C6F6.

Chemical dynamics Simulation studies on benzene dimer (Bz2) and benzene-hexachlorobenzene (Bz-HCB) as performed in the past suggest that the coupling between the monomeric (intramolecular) vibrational modes and modes generated due to the association of two monomers (intermolecular) has to be neither strong nor weak for a fast dissociation of the complex. To find the optimum coupling, four complexes are taken into consideration in this work, namely, benzene-monofluorobenzene, benzene-monochlorobenzene, benzene-trifluorobenzene (Bz-TFB), and benzene-trichlorobenzene. Bz-TFB has the highest rate of dissociation among all seven complexes, including Bz2, Bz-HCB, and Bz-HFB (HFB stands for hexafluorobenzene). The set of vibrational frequencies of Bz-TFB is mainly the reason for this fast dissociation. The mass of chlorine in Bz-HCB is optimized to match its vibrational frequencies similar to those of Bz-TFB, and the dissociation of Bz-HCB becomes faster. The power spectrum of Bz-TFB, Bz-HCB, and Bz-HCB with the modified mass of chlorine is also computed to understand the extent of the said coupling in these complexes.

Post-Transition State Direct Dynamics Simulations on the Ozonolysis of Catechol in an N2 Bath and Comparison with Gas-Phase Results.

Chemical dynamics simulations on the post-transition state dynamics of ozonolysis of catechol are performed in this article using a newly developed QM + MM simulation model. The reaction is performed in a bath of N2 molecules equilibrated at 300 K. Two bath densities, namely, 20 and 324 kg/m3, are considered for the simulation. The excitation temperatures of a catechol-O3 moiety are taken as 800, 1000, and 1500 K for each density. At these new excitation temperatures, the gas-phase results are also computed to compare the results and quantify the effect of surrounding molecules on this reaction. Like the previous findings, five reaction channels are observed in the present investigation, producing CO2, CO, O2, small carboxylic acid (SCA), and H2O. The probabilities of these products are discussed with the role of bath densities. Results from the gas-phase simulation and density of 20 kg/m3 are very similar, whereas results differ significantly at a higher bath density of 324 kg/m3. The rate constants for the unimolecular channel at each temperature and density are also calculated and reported. The QM + MM setup used here can also be used for other chemical reactions, where the solvent effect is important.

Unimolecular dissociation of C6H6-C6H5Cl, C6H6-C6H3Cl3, and C6H6-C6Cl6 complexes using machine learning approach.

The application of Machine Learning (ML) algorithms in chemical sciences, particularly computational chemistry, is a vastly emerging area of modern research. While many applications of ML techniques have already been in place to use ML based potential energies in various dynamical simulation studies, specific applications are also being successfully tested. In this work, the ML algorithms are tested to calculate the unimolecular dissociation time of benzene-hexachlorobenzene, benzene-trichlorobenzene, and benzene-monochlorobenzene complexes. Three ML algorithms, namely, Decision-Tree-Regression (DTR), Multi-Layer Perceptron, and Support Vector Regression are considered. The algorithms are trained with simulated dissociation times as functions (attributes) of complexes' intramolecular and intermolecular vibrational energies. The simulation data are used for an excitation temperature of 1500 K. Considering that the converged result is obtained with 1500 trajectories, an ML algorithm trained with 700 simulation points provides the same dissociation rate constant within statistical uncertainty as obtained from the converged 1500 trajectory result. The DTR algorithm is also used to predict 1000 K simulation results using 1500 K simulation data.

Visiblelight-induced ternary electron donor-acceptor complex enabled synthesis of 2-(2-hydrazinyl) thiazole derivatives and the assessment of their antioxidant and antidiabetic therapeutic potential.

A mild and eco-friendly visible-light-induced synthesis of 2-(2-hydrazinyl) thiazole from readily accessible thiosemicarbazide, carbonyl, and phenacyl bromide in the absence of a metal catalyst and/or any extrinsic photosensitizer is reported. This approach only requires a source of visible light and a green solvent at room temperature to produce the medicinally privileged scaffolds of hydrazinyl-thiazole derivatives in good to outstanding yields. Experimental studies support the in situ formation of a visible-light-absorbing, photosensitized colored ternary EDA complex. The next step is to prepare a pair of radicals in an excited state, which makes it easier to prepare thiazole derivatives through a SET and PCET process. DFT calculations additionally supported the mechanistic analysis of the course of the reaction. The antioxidant and antidiabetic properties of some of the compounds in the synthesized library were tested in vitro. All the investigated compounds demonstrated appreciable antioxidant activity, as evidenced by the reducing power experiment and the IC50 values of the DPPH radical scavenging experiment. Furthermore, the IC50 values for 4c, 4d, and 4g also demonstrated a strong α-amylase inhibitory effect.

Dynamical Behavior of Aromatic Trimer Complexes in Unimolecular Dissociation Reaction at High Temperatures. Case Studies on C6H6-C6F6-C6H6 and C6H6 Trimer Complexes.

The intramolecular vibrational energy redistribution (IVR) dynamics during unimolecular dissociation of aromatic trimers at high temperatures is the primary interest of this study. Chemical dynamics simulations are performed for the unimolecular dissociation of benzene-hexafluorobenzene-benzene (Bz-HFB-Bz) and benzene trimer (Bz-trimer) complexes at a temperature range of 1000-2000 K. Partial dissociation of both the complexes is observed, which leads to a dimer and a monomer in the dynamics. However, the probability of such dissociation was found much lower in the case of the Bz-trimer, which further decreases with the increase of temperature. The rate of partial dissociation of Bz-HFB-Bz is faster at 1500, 1800, and 2000 K, whereas the rate of complete dissociation of the Bz-trimer is significantly faster than Bz-HFB-Bz at all temperatures. This is just the opposite of the corresponding dimer's dissociation, where benzene-hexafluorobenzene (Bz-HFB) dissociates at a faster rate than the benzene dimer (Bz-dimer). Thus, the dissociation dynamics of the trimer is different than that of the dimer. Simulations with excited intramolecular and intermolecular modes of the trimer complexes reveal that energy flows from intermolecular to intramolecular modes of Bz-HFB-Bz more freely than the Bz-trimer, and the dissociation process becomes slower for the former. Calculated activation energies for both types of dynamics are much lower than the corresponding binding energies, which may be due to the anharmonicity. The Arrhenius equation with an anharmonic correction factor is considered to recalculate the activation energy and pre-exponential factor.

Pyrene Based Chemosensor for Selective Sensing of Fluoride in Aprotic and Protic Environment.

A new aromatic hydrazone based on pyrene-1-aldehyde was synthesized and characterized by (1)H NMR and mass spectrometric analyses. The sensing properties of the hydrazone were studied by absorption and fluorescence studies in the aprotic solvent DMSO. It was capable of visual and fluorescent detection of fluoride over competitive ions (Cl(-), Br(-), H2PO4 (-), AcO(-)). Moreover, the in-situ prepared iron(III) complex of the hydrazone was investigated as a turn off fluorescent fluoride sensor in aqueous medium by displacement mechanism.

Construction of diabatic Hamiltonian matrix from ab initio calculated molecular symmetry adapted nonadiabatic coupling terms and nuclear dynamics for the excited states of Na3 cluster.

We present the molecular symmetry (MS) adapted treatment of nonadiabatic coupling terms (NACTs) for the excited electronic states (2(2)E' and 1(2)A1') of Na3 cluster, where the adiabatic potential energy surfaces (PESs) and the NACTs are calculated at the MRCI level by using an ab initio quantum chemistry package (MOLPRO). The signs of the NACTs at each point of the configuration space (CS) are determined by employing appropriate irreducible representations (IREPs) arising due to MS group, and such terms are incorporated into the adiabatic to diabatic transformation (ADT) equations to obtain the ADT angles. Since those sign corrected NACTs and the corresponding ADT angles demonstrate the validity of curl condition for the existence of three-state (2(2)E' and 1(2)A1') sub-Hilbert space, it becomes possible to construct the continuous, single-valued, symmetric, and smooth 3 × 3 diabatic Hamiltonian matrix. Finally, nuclear dynamics has been carried out on such diabatic surfaces to explore whether our MS-based treatment of diabatization can reproduce the pattern of the experimental spectrum for system B of Na3 cluster.

Ab initio calculations on the excited states of Na3 cluster to explore beyond Born-Oppenheimer theories: adiabatic to diabatic potential energy surfaces and nuclear dynamics.

We perform ab initio calculation using quantum chemistry package (MOLPRO) on the excited states of Na(3) cluster and present the adiabatic PESs for the electronic states 2(2)E' and 1(2)A(1)', and the non-adiabatic coupling (NAC) terms among those states. Since the ab initio calculated NAC elements for the states 2(2)E' and 1(2)A(1)' demonstrate the numerical validity of so called "Curl Condition," such states closely form a sub-Hilbert space. For this subspace, we employ the NAC terms to solve the "adiabatic-diabatic transformation (ADT)" equations to obtain the functional form of the transformation angles and pave the way to construct the continuous and single valued diabatic potential energy surface matrix by exploiting the existing first principle based theoretical means on beyond Born-Oppenheimer treatment. Nuclear dynamics has been carried out on those diabatic surfaces to reproduce the experimental spectrum for system B of Na(3) cluster and thereby, to explore the numerical validity of the theoretical development on beyond Born-Oppenheimer approach for adiabatic to diabatic transformation.

The multistate multimode vibronic dynamics of benzene radical cation with a realistic model Hamiltonian using a parallelized algorithm of the quantumclassical approach.

We demonstrate the workability of a parallelized algorithm of the time-dependent discrete variable representation (TDDVR) method to explore the detailed dynamical aspects of vibronic interaction in two three-state model Hamiltonians (X (2)E(1g), B (2)E(2g), C (2)A(2u) and B (2)E(2g), D (2)E(1u), E (2)B(2u)) of benzene radical cation along with a preliminary investigation on its five electronic states (X (2)E(1g), B (2)E(2g), C (2)A(2u), D (2)E(1u), and E(2)B(2u)). Since those electronic states are interconnected through a series of conical intersections, we have used six and nine vibronically important modes for the three- and five-state Hamiltonians, respectively, in order to perform the quantum dynamics on such system. The population profiles calculated by using our TDDVR approach show reasonably good agreement with the results obtained by exact quantum mechanical (multiconfiguration time-dependent Hartree) method, whereas the corresponding (calculated) photoabsorption spectra originating from various electronic states agree well with the experimental ones. It is important to note that the parallelized algorithm of our TDDVR approach reduces the computation cost by more than an order of magnitude compared to its serial analog. The TDDVR approach appears to be a good compromise between accuracy and speed for such large molecular system, where quantum mechanical description is needed in a restricted region.

A quantum-classical approach to the molecular dynamics of butatriene cation with a realistic model Hamiltonian.

We are investigating the molecular dynamics of the butatriene cation after excitation from the ground state (X(2)B(2g)) to the first excited electronic state (A(2)B(2u)) by using the time-dependent discrete variable representation (TDDVR) method. The investigation is being carried out with a realistic 18-mode model Hamiltonian consisting of all the vibrational degrees of freedom of the butatriene molecule. First, we perform the simulation on a basic five mode model, and then by including additional thirteen modes as bath on the basic model. This sequential inclusion of bath modes demonstrates the effect of so called weak modes on the subsystem, where the calculations of energy and population transfer from the basic model to the bath quantify the same effect. The spectral profile obtained by using the TDDVR approach shows reasonably good agreement with the results calculated by the quantum mechanical approach/experimental measurement. It appears that the TDDVR approach for those large systems where quantum mechanical description is needed in a restricted region, is a good compromise between accuracy and speed.