Normal and five-fingered hand: comparative X-ray morphometry in the post-natal age.

BACKGROUND: Five-fingered hand (5-FH) with completely developed phalanges is a rare phenotype observed so far only in humans and characterised by three phalanges of the 1st ray. A long-lasting, debated question is if the missing element of the normal hand 1st ray is the metacarpal or the phalanx. In this study, comparative X-rays morphometry of long bones in normal and 5-FH is carried out with the aim to face this question through homology analysis of long bone segments in the transverse and longitudinal line of normal hand and 5-FH. MATERIALS AND METHODS: In the normal hand X-rays (n =20) and in a 5-FH X-rays series (n = 9) the relative length of each segment on the ray total length and the index of growth rate (IGR) were assessed. The calculation of the first parameter in normal hand bi-phalangeal thumb was carried out on the 3rd ray total length in the same hand. RESULTS: The parameters of relative length and the proximal/distal growth rate asymmetry in the post-natal period (assessed through the IGR) confirmed in 5-FH the homology of all the five segment on the transverse line. In the normal control hand, the relative length assessment methodology was biased by the missing segment of the thumb, therefore, the reference to the 3rd ray total length in the same hand (instead of the 1st), allowed the homology analysis of the thumb metacarpal and 1st phalanx with the lateral segments (2nd-5th ray) of the same hand. The 5-FH analysis was used to choose the more appropriate reference ray for the normal hand group. CONCLUSIONS: The comparative analysis of relative lengths and IGRs in the two groups suggested homology of the (anatomical) 1st metacarpal with the 2nd-5th proximal phalanges in the same hand and that of the (anatomical) 1st proximal phalanx with the 2nd-5th mid phalanges. These data suggest that the missing segment of the normal hand thumb is the metacarpal.

The canalicular system and the osteoblast domain in human secondary osteons.

The lacunar-canalicular system in human secondary osteons was examined by two complementary techniques: light microscopy analysis of undecalcified thick sections and the SEM cortex-fractured surface technique. Unlike the earlier definitions of 'osteoblastic domain' presented as the matrix volume produced by osteoblasts in the process of osteon infilling, this study measured the domain by the length of osteoblast dendritic processes. The domain extension was defined along radial vectors advancing from the reversal line towards the central canal. According to their lengths, domains were divided into three classes: peripheral, intermediate and internal. The mean length of peripheral domains was significantly shorter than those of the intermediate and internal domains. This suggests that the infilling process is modulated by an initial preparatory phase characterised by osteoblast adhesion to the wall of the cutting cone, and a limited matrix synthesis, followed by a regular matrix volume apposition organised in concentric layers. In addition to the radial canaliculae arranged along converging vectors in planes perpendicular to the central canal, we distinguished a further class of canaliculae, the equatorial canaliculae originating from the major perimeter of the lacuna and spreading out radially in the plane of the same lacuna (therefore, perpendicularly to the radial canaliculae). The whole lacunar-canalicular network was structured as a closed system around the vascular axis of the central canal with very few canaliculae crossing the reversal line and connecting the neighbouring osteons. These anatomical observations contribute to our knowledge of lacunar-canalicular system development.

Growth and shape modelling of the rabbit tibia: study of the dynamics of developing skeleton.

The proliferative impulse of the growth plate cartilage and related structures and its effect on the dimensions of long bones are well documented. The modulation of shape, however, is less known, and in general, it is referred to the coupled resorption/apposition process of bone modelling. A morphometric study was carried out on rabbit tibiae comparing size increments and shape changes in relation to age. Utilizing measurements made using dried bones, radiography and computerized tomography, it was possible to perform a three-dimensional analysis of shape modulation occurring during a period of growth extending from 3 months to 1 year of age. The dynamics of the shape changes related to growth were studied with a fluorescent tetracycline labelling. This enabled correlation of shape modulation with the 3-D distribution of apposition and resorption. The current thinking behind the influences and mechanical forces affecting bone architecture was discussed in the light of these findings. Several factors play a role in the structural organization of the human and upper vertebrates' skeleton, whose shape is genetically determined in the complex process usually referred as 'modelling'. This does not conflict with the existing evidence of remodelling being influenced by mechanical stimuli, but the unsolved question remains how physical forces (strains) act on the biological substrate of cartilage and bone cells.

Cobalt, chromium and molybdenum ions kinetics in the human body: data gained from a total hip replacement with massive third body wear of the head and neuropathy by cobalt intoxication.

INTRODUCTION: A patient with a total hip replacement developed optic, acoustic and peripheral neuropathy from metal ions intoxication, due to the wear products released from the prosthesis. Subsequently the kinetics of the metal ions was studied. MATERIALS AND METHODS: Massive wear and acute intoxication allowed a study of the metal ions kinetics and of EDTA treatment. RESULTS: Plasma and other organic fluids were saturated by each of the metal ions released from the exposed surface according to the solubility of each ion; a larger fraction of Co ions was bound within red cells, while the plasmatic fraction appeared more movable. In a patient with a prosthesis subjected to wear, the ions released are from the prosthetic and from the debris surface (spread in the body). The latter is a function of the number and size of particles. DISCUSSION: Revision of the prosthesis from the point of view of the metal ions kinetics corresponded to a reduction of the releasing surface because of debris washed out by irrigation and tissue excision; however, the metal particles spread by lymphatic circulation continued to release ions even though the source of wear had been removed. Early diagnosis of high metal wear can be ascertained with mass spectrometry and after revision high levels of metal ions can only be reduced with repeated chelating treatment. It is preferable not to revise fractured ceramic components with a polyethylene-metal articulation.

Morphometric analysis of the canal system of cortical bone: An experimental study in the rabbit femur carried out with standard histology and micro-CT.

The osteonal pattern of cortical bone is gradually built around the intracortical vessels by the progression of the cutting cones (secondary remodelling); therefore, the central canal size can be used as index of the remodelling activity. An experimental model in the rabbit femur was used to investigate, through central canal morphometry and frequency distribution analysis, the remodelling activity, comparing the middle of the diaphysis (mid-shaft) with the extremity (distal-shaft) and at the same level sectors and layers of the cortex in transversal sections. The study documented a higher density of canals in the mid-shaft than in the distal-shaft and a higher remodelling in the distal-shaft. There were no significant differences between dorsal, ventral, medial and lateral sectors at both mid-shaft and distal-shaft levels, while the number of canals was higher in the sub-periosteal layers than in the sub-endosteal. A lower threshold of 40 microm(2) was observed in the central canal area. Sealed osteons in the midshaft were 22.43% of the total number of osteons of the central canal area between 40 and 200 microm(2) and 0.44% of those of the distal-shaft. Micro-CT allowed a 3D reconstruction of the vascular canal system, which confirmed the branched network pattern rather than the trim architecture of the traditional representation. Some aspects like the lower threshold of the central canal size and the sealed osteons documented the plasticity of the system and its capacity for adaptation to changes in the haemodynamic conditions.

Indications on suitable scaffold as carrier of stem cells in the alveoloplasty of cleft palate.

Autologous iliac crest bone is used to close the residual alveolar bone defect in cleft palate patients during late mixed dentition. Surgery involves physical and anaesthesiologic risks, long-time hospitalization, high costs and not always good results (15% failure rate). Alternatives to iliac crest bone grafting are going to be evaluated: synthetic, xenograft and allograft matrices combined with platelet-rich plasma or recombined bone morphogenic proteins for osteoinductivity are commercially available. These alternatives have not yet been determined to be equivalent to the previous treatment. A new field of research is represented by stem cells, which have been also used to regenerate ischaemic cardiac tissue after heart attack, to treat hypophosphatasia and osteoporosis. Our aim was to use osteoblasts from stem cells to close the residual palate cleft in association with a suitable carrier. Stem cells are expanded in the Aastrom bioreactor, differentiated into osteoblasts and positioned in the bone defect by means of a Spongostan scaffold. This scaffold has the best characteristics as commercial availability, low cost, good manageability, absence of allergic reactions or other side effects on patient, biocompatibility, imbibition, radiotransparency, reabsorbability and osteoinductivity. Previous studies encourage Spongostan scaffold application.

GH-releasing peptides and bone.

It has been extensively demonstrated that GH secretagogues (GHS) play a role in the regulation of bone metabolism in animals and humans. Unlike GH, administration of GHS does not increase bone resorption markers, suggesting that a mechanism exclusively linked to GH release cannot account for the effect of these compounds. On this line, we investigated the effect of GHS and ghrelin, the endogenous ligand of GHS receptors, on bone cells. We found that both hexarelin and ghrelin significantly stimulated cell proliferation and increased alkaline phosphatase and osteocalcin production in primary cultures of rat calvaria osteoblasts. In the same cells, we were able to detect the mRNA for the GHS receptor by RT-PCR and the corresponding protein by Western blot, indicating that ghrelin and GHS may bind and activate this receptor. Two isoforms of GHS receptors (GHS-R), which are presumably the result of alternate processing of pre-mRNA, have been identified and designed receptors 1a (R1a) and 1b (R1b). Ghrelin, the endogenous ligand of the GHS receptors, binds with high affinity GHS-R1a only. Unlike fetal calvaria cells, osteoblasts derived from adult rat tibia did not express the GHS-R1 a, but only the biologically inactive isoform GHS-R1b. The latter isoform was present in only one of the three specimens of human osteoblasts obtained from the iliac crest or the upper femur of patients during surgery. These results would indicate that only osteoblasts from fetal bone express functional receptors responsive to ghrelin and GHS.

The Mitchell bunionectomy: a prospective study of 60 consecutive cases utilizing single K-wire fixation.

The authors prospectively evaluated 45 patients (60 feet) affected by hallux valgus and treated with a distal metatarsal osteotomy. The surgical procedure consisted of a modified Mitchell osteotomy, in which fixation was achieved with a Kirschner wire that was driven into the proximal osteotomy fragment and buttressed the distal one. Early weightbearing was allowed without a cast. Follow-up averaged 25 months. The mean American Orthopedic Foot and Ankle Society clinical hallux score increased from 44.6/100 preoperatively to 83.2/100. Radiographic evaluation showed that mean metatarsophalangeal and intermetatarsal angles decreased respectively from 31.7 degrees to 16.9 degrees, and from 15.4 degrees to 8.6 degrees. Short-term loss of correction occurred in three cases (4%). Six feet (10%) had unrelieved metatarsalgia that was related to excessive shortening of the first metatarsal and/or inappropriate orientation of the metatarsal head. Stabilization of the Mitchell osteotomy with a Kirschner wire proved safe and effective for the surgical correction of mild to moderate hallux valgus.

The relevance of hydroxyapatite and spongious titanium coatings in fixation of cementless stems. An experimental comparative study in rat femur employing histological and microangiographic techniques.

Pure titanium rods plasma-spray coated with hydroxyapatite (HA) or porous titanium (Ti) of controlled roughness were implanted bilaterally in the distal femur of Sprague-Dawley rats to compare the extent of bone growth on the two types of coating. The relevance of other factors, like mechanical stability and biological adaptation of the bone to the insertion of a foreign body implant, were investigated in femora which were over-reamed (absence of primary fit) or reamed without insertion of the rod. Continuous tetracycline labeling for the first 30 days and for the last 2 weeks in the 90-day group was performed; histological/histometric, fluorescence and microangiographic studies were carried out on serial sections of the implanted and control femora. In the group of stable implants, HA-coated rods showed 90% integration versus 53% with Ti-coated implants (P < 0.001); in over-reamed implants neither surface bone growth nor endosteal fixation occurred, and both types of rods were surrounded by a thick layer of connective tissue. The study documented early adhesion of osteoblasts and direct deposition of bone matrix on the substrate, while on spongious titanium osteogenesis was observed only in proximity to the surface. Remodeling of the reactive, primary bone to mature, lamellar bone took the form of a capsule surrounding the implants and radial bridges connecting the latter to the endosteal surface. The number, height and thickness of these bridges appeared to be the factors determining implant stability, rather than the extent of the bony capsule on the perimeter of the implant. Integration was a function not only of mechanical conditions and surface geometry, but also of the biological response of the whole bone to changes in the vascularization pattern. The reported phenomena can be seen more easily in experimental models involving small rodents because of their fast bone turnover and revascularization, but it is expected that they take place, even at a lower speed, in clinical situations like cementless stems of total hip replacement.

Mutations in the EXT1 and EXT2 genes in hereditary multiple exostoses.

Hereditary multiple exostoses (EXT; MIM 133700) is an autosomal dominant bone disorder characterized by the presence of multiple benign cartilage-capped tumors (exostoses). Besides suffering complications caused by the pressure of these exostoses on the surrounding tissues, EXT patients are at an increased risk for malignant chondrosarcoma, which may develop from an exostosis. EXT is genetically heterogeneous, and three loci have been identified so far: EXT1, on chromosome 8q23-q24; EXT2, on 11p11-p12; and EXT3, on the short arm of chromosome 19. The EXT1 and EXT2 genes were cloned recently, and they were shown to be homologous. We have now analyzed the EXT1 and EXT2 genes, in 26 EXT families originating from nine countries, to identify the underlying disease-causing mutation. Of the 26 families, 10 families had an EXT1 mutation, and 10 had an EXT2 mutation. Twelve of these mutations have never been described before. In addition, we have reviewed all EXT1 and EXT2 mutations reported so far, to determine the nature, frequency, and distribution of mutations that cause EXT. From this analysis, we conclude that mutations in either the EXT1 or the EXT2 gene are responsible for the majority of EXT cases. Most of the mutations in EXT1 and EXT2 cause premature termination of the EXT proteins, whereas missense mutations are rare. The development is thus mainly due to loss of function of the EXT genes, consistent with the hypothesis that the EXT genes have a tumor- suppressor function.

The effects of bone resorption inhibitors on the growth plate and proximal tibial metaphysis of rats: clinical implications.

This study investigated the effects of diphosphonates at scalar doses in a high bone turnover structure, namely, the proximal tibial metaphysis of rats. Arrest of bone modeling was represented by cylindrical-shaped metaphyses, increased height of the perichondrial bone bark, and persistence of primary metaphyseal trabeculae; these changes were dose-related. Higher doses of the inhibitors produced extension of the growth plate and arrest of the mineralization process. The dose-related dissociation between the effects on bone resorption and mineralization allows the therapeutic use of this class of drugs.

Morphology of peri-implant regenerated bone, in sheep's tibia, by means of guided tissue regeneration.

BACKGROUND: No data on the resistance to functional loads of bone regenerated by means of guided tissue regeneration, can be found. In this paper the new-formed bone is analyzed, in cases that see the surgical creation of defects in testing animals. The morphological aspects of perimplant bone, regenerated by means of bone substitutes or not, were evaluated. METHODS: A coronal defect was created by means of a counter-sink bur. The following step provided for osseointegrated fixtures, with a machined or blasted (TiOblast) surface, to be installed. Some bone defects were filled with Bio-Oss, and covered with resorbable membrane (Vycril), others were left unfilled. The animals were sacrificed after different periods of time (24 and 45 days). Some thick sections (200 microns) underwent then microradiography and were examined with a microscope, under transmitted and polarized light. Other sections, thin (5 microns), were coloured with toluidine blue, Gomori's Stain and Solochrome Cyanine/Congo red. RESULTS: Data confirm the excellent behaviour of bovine bone and of TiO blasted fixtures. The experimental results bring into evidence that, in cases of Guided Bone Regeneration (GBR) by means of membrane, the use of fixtures with a blasted surface (TiOblast), and of Bio-Oss as bone substitute, made osseointegration easier. CONCLUSIONS: Results, moreover, suggest that in case of implant surgery with GBR, in order to allow the maturation of regenerated bone, it's healing time must be prolonged.

The effects of mechanical forces on bones and joints. Experimental study on the rat tail.

We have used an experimental model employing the bent tail of rats to investigate the effects of mechanical forces on bones and joints. Mechanical strain could be applied to the bones and joints of the tail without direct surgical exposure or the application of pins and wires. The intervertebral disc showed stretched annular lamellae on the convex side, while the annulus fibrosus on the concave side was pinched between the inner corners of the vertebral epiphysis. In young rats with an active growth plate, a transverse fissure appeared at the level of the hypertrophic cell layer or the primary metaphyseal trabecular zone. Metaphyseal and epiphyseal trabeculae on the compressed side were thicker and more dense than those of the distracted part of the vertebra. In growing animals, morphometric analysis of hemiepiphyseal and hemimetaphyseal areas, and the corresponding trabecular bone density, showed significant differences between the compressed and distracted sides. No differences were observed in adult rats. We found no significant differences in osteoclast number between compressed and distracted sides in either age group. Our results provide quantitative evidence of the working of 'Wolff's law'. The differences in trabecular density are examples of remodelling by osteoclasts and osteoblasts; our finding of no significant difference in osteoclast numbers between the hemiepiphyses in the experimental and control groups suggests that the response of living bone to altered strain is mediated by osteoblasts.

Pathology of disappearing bone disease: a case report with immunohistochemical study.

A case of disappearing bone disease of the proximal femur is reported with histopathological and immunohistochemical studies. There was a densely packed cellular tissue, positive to endothelial antibodies, in areas of massive bone destruction. A more differentiated vascular tissue was present where trabecular cancellous or cortical bone was preserved with only focal zones of accelerated bone remodelling. The self-limited course correlates well with two phases of evolution of the histopathological lesions with neoplastic-like proliferation of endothelial cells corresponding to the rapid and massive bone destruction, and a later differentiation of the cells in mature vascular structures, but still with accelerated bone resorption which is partly compensated by appositional activity.

The reaction to nailing or cementing of the femur in rats. A microangiographic and fluorescence study.

Bone reaction to cement and to a cementless stem was studied in the rat femur with histological fluorescence and microangiographic techniques. Periosteal and endosteal apposition, and consequent remodelling, appeared as a reaction to reaming rather than caused by cement or a cementless stem. Every change in bone began with proliferation, progression and orientation of the vessels. Endosteal apposition was absent in cemented femurs because the entire medulla was occupied by the acrylic cement, but remodelling of the subendosteal cortex followed medullary revascularisation which was far advanced after 90 days. In cementless stems, endosteal apposition of primary woven bone and remodelling was the basis for bony ingrowth and anchorage through bony bridges. Our results suggest that the pattern of blood supply is relevant to the structural organisation of mature lamellar bone around the implant. Cemented stems have maximum anchorage and stability as soon as they are inserted, but this decreases with time as revascularisation occurs. Cementless stems can reach maximum integration later after insertion, and revascularisation is less critical because they usually do not fill the canal completely.

Periosteal and endosteal reaction to reaming and nailing: the possible role of revascularization on the endosteal anchorage of cementless stems.

The reaction of bone to titanium implants of different shapes inserted in the rabbit tibia was investigated with histological and perfusion techniques to determine the pattern of vessel distribution. The experimental implants included full cylindrical rods, hollow rods with holes on the surface and wire mesh rods. In the implanted bones the rods were found to fill a large area of the medullary canal; however, owing to the discrepancy between the shape of the diaphysis and the implant, the endosteal contact was never complete. In an early phase, reactive bone filled the gap between the endosteal and the implant surface; in hollow and wire mesh rods bone had grown inside through the lateral holes or loops of the mesh. Revascularization took place together with remodelling of the endosteal, primary bone to mature lamellar. In full implants a reticle of newly formed vessels developed around the rods; in hollow and wire mesh implants vessels had grown inside the implant itself and the endosteal surface had a more regular profile than in full rods. Wire mesh plugs prevented formation of a peripheral medullary space and showed no encapsulation; wires in contact with or in proximity to the endosteal surface were incorporated by lamellar systems with strong connections with the original cortical bone.

Reversibility of the inhibitory effect of salmon calcitonin on bone resorption in rats.

Inhibition of osteoclastic bone resorption has been induced in growing rats with high doses of salmon calcitonin. This effect was evaluated by measuring the perichondrial ring height of the proximal tibial metaphysis. The aim was to assess whether osteoclastic activity resumed after a period of inhibition with high doses of calcitonin. 20 male Sprague-Dawley rats were treated for 21 days with 100 units/kg/day of salmon calcitonin subcutaneously and killed after 0-60 days, together with non-treated controls at 0 and 60 days. Arrest of metaphyseal modeling and increased height of the perichondrial ring at the end of the period of therapy (P 0.002 versus controls) were observed. Recovery of bone resorption was evident 20 and 40 days after withdrawal of calcitonin.

Histology of the metal-bone interface: interpretation of plastic embedded slides.

The interference of processing and preparation of histological slides for the study of morphology and morphometry of bone-implant interfaces was investigated in an experimental model, in which a titanium plate was inserted through the cortical bone into the medullary cavity of rat tibiae. The thickness of the sections, burr and notching of the cut border, and staining properties of the embedding resin were found to significantly influence the appearance of the bone-implant interface and, when morphometry was applied, the extent of direct bone-metal contact. The model of the interface resulting from this study is that of some bony processes abutting on the metal surface, while most of the contact is between metal and connective tissue or vascular spaces.

Spondylosis and lumbar instability: pathologic changes.

The degenerative processes of the lumbar spine generally initiate from the intervertebral disc, at the level of which progressive biochemical and structural changes take place leading to a modification in its physical properties of elasticity and mechanical resistance. Disc lesions cause pathological changes in the vertebral bodies, where osteophytes appear, and in the posterior joints. In more severe forms of the process the severe deformation of joint shape may lead to a condition of spondylolisthesis.

Experimental model in vivo for quantitative assessment of bone resorption inhibition.

Quantitative assessment of bone resorption inhibition in vivo is not easily accomplished; methods relying on a count of osteoclasts are questionable, and histomorphometric evaluation of the bone mass presents several technical problems as well. The authors developed a simple method to measure the inhibition of bone resorption by study of the proximal tibial metaphysis of growing rats: the height of the perichondrial bone ring was taken as an index of the balance between osteoblastic and osteoclastic activity because any agent that inhibits osteoclasts (without interference with osteoblasts) produces an increase in the height of this anatomical structure. Since the ring is well demarcated by surrounding tissues, its height can be measured with accuracy and used for quantitative assessment of bone resorption inhibition. This model was tested with salmon calcitonin, and it provides evidence in vivo that this hormone inhibits osteoclastic bone resorption.