Effect of osteophyte removal on simulated range of motion using 3-dimensional preoperative planning software for reverse total shoulder arthroplasty.

Background: Glenohumeral osteophytes (OPs) can adversely influence postoperative range of motion (ROM) following shoulder arthroplasty due to mechanical impingement. Though commercial three-dimensional preoperative planning software (3D PPS) is available to simulate ROM before and after OP resection, little is known about the magnitude of effect OPs and their subsequent removal have on simulated glenohumeral ROM. Methods: Included patients were 1) indicated for reverse total shoulder arthroplasty (rTSA) using 3D PPS and 2) presented with glenoid and/or humeral head OPs on preoperative two-dimensional computed tomography (2D-CT) imaging. Thirty patients met the inclusion criteria (9 females, 21 males; mean age 70.45 ± 4.99 years, range 63-80 years). All subjects (n = 30) presented with humeral OPs (mean volume: 2905.16 mm3, range 109.1-11,246 mm3), while 11 subjects also presented with glenoid OPs (mean volume 108.06 mm3, range 37.59-791.4 mm3). Preoperative CTs were used to calculate OP volume (mm3) and OP circumferential extent (clockface). Mean clockface position for circumferential humeral OPs originated at 6:09 (range 4:30-7:15) and extended to 8:51 (range 8:15-10:15). Mean clockface position for glenoid OPs originated at 3:00 (range 2:00-5:00) and extended to 6:16 (range 3:00-7:30). 3D implants on PPS were standardized to achieve 0° of version, 0° of inclination and 4 mm of net lateralization. Thirty-nine and thirty-six mm glenospheres were used for males and females, respectively. 3D PPS was used to evaluate simulated ROM differences before and after OP removal in the planes of adduction (ADD), abduction, internal rotation (IR), external rotation (ER), extension, and flexion. Impact of OP volume and circumferential extent on pre and postop removal ROM were also analyzed. Results: Humeral OP removal significantly increased impingement-free ADD, IR, ER, extension, and flexion. Removal of larger (mm3) humeral OPs positively correlated with improvement in IR (R = 0.452, P = .011), ER (R = 0.394, P = .033), and flexion (R = 0.500, P < .01). Greater circumferential extent of humeral OPs correlated with worse preremoval ROM in the planes of ADD (R = 0.364, P = .02) and extension (R = 0.403, P = .04), and improvements in ER postop removal (R = 0.431, P = .03). Conclusion: Humeral OP removal significantly increases impingement-free ADD, IR, ER, extension, and flexion in simulated 3D PPS models following rTSA. Magnitude of simulated ROM improvement is influenced by initial humeral OP volume and circumferential clockface extent. Surgeons should consider these effects when using 3D PPS for rTSA planning to optimize postoperative ROM prognostics.

Outcomes of total shoulder arthroplasty in patients with prior anterior shoulder instability: minimum 5-year follow-up.

BACKGROUND: Patients with a history of anterior shoulder instability (ASI) commonly progress to glenohumeral arthritis or even dislocation arthropathy and often require total shoulder arthroplasty (TSA). The purposes of this study were to (1) report patient-reported outcomes (PROs) after TSA in patients with a history of ASI, (2) compare TSA outcomes of patients whose ASI was managed operatively vs. nonoperatively, and (3) report PROs of TSA in patients who previously underwent arthroscopic vs. open ASI management. METHODS: Patients were included if they had a history of ASI and had undergone TSA ≥5 years earlier, performed by a single surgeon, between October 2005 and January 2017. The exclusion criteria included prior rotator cuff repair, hemiarthroplasty, or glenohumeral joint infection before the index TSA procedure. Patients were separated into 2 groups: those whose ASI was previously operatively managed and those whose ASI was treated nonoperatively. This was a retrospective review of prospective collected data. Data collected was demographic, surgical and subjective. The PROs used were the American Shoulder and Elbow Surgeons score, Single Assessment Numerical Evaluation score, QuickDASH (Quick Disabilities of the Arm, Shoulder and Hand) score, and 12-item Short Form physical component score. Failure was defined as revision TSA surgery, conversion to reverse TSA, or prosthetic joint infection. Kaplan-Meier survivorship analysis was performed. RESULTS: This study included 36 patients (27 men and 9 women) with a mean age of 56.4 years (range, 18.8-72.2 years). Patients in the operative ASI group were younger than those in the nonoperative ASI group (50.6 years vs. 64.0 years, P < .001). Operative ASI patients underwent 10 open and 11 arthroscopic anterior stabilization surgical procedures prior to TSA (mean, 2 procedures; range, 1-4 procedures). TSA failure occurred in 6 of 21 patients with operative ASI (28.6%), whereas no failures occurred in the nonoperative ASI group (P = .03). Follow-up was obtained in 28 of 30 eligible patients (93%) at an average of 7.45 years (range, 5.0-13.6 years). In the collective cohort, the American Shoulder and Elbow Surgeons score, Single Assessment Numerical Evaluation score, QuickDASH (Quick Disabilities of the Arm, Shoulder and Hand) score, and 12-item Short Form physical component score significantly improved, with no differences in the postoperative PROs between the 2 groups. We found no significant differences when comparing PROs between prior open and prior arthroscopic ASI procedures or when comparing the number of prior ASI procedures. Kaplan-Meier analysis demonstrated a 79% 5-year survivorship rate in patients with prior ASI surgery and a 100% survivorship rate in nonoperatively managed ASI patients (P = .030). CONCLUSION: At mid-term follow-up, patients with a history of ASI undergoing TSA can expect continued improvement in function compared with preoperative values. However, TSA survivorship is decreased in patients with a history of ASI surgery compared with those without prior surgery.

Utility of Talus Osteochondral Allograft Augmentation for Varying Hill-Sachs Lesion Sizes: A Cadaveric Study.

Background: Humeral head reconstruction with fresh osteochondral allografts (OCA) serves as a potential treatment option for anatomic reconstruction. More specifically, talus OCA is a promising graft source because of its high congruency with a dense cartilaginous surface. Purpose: To analyze the surface geometry of the talus OCA plug augmentation for the management of shoulder instability with varying sizes of Hill-Sachs lesions (HSLs). Study Design: Controlled laboratory study. Methods: Seven fresh-frozen cadaveric shoulders were tested in this study. The humeral heads were analyzed using actual patients' computed tomography scans. Surface laser scan analysis was performed on 7 testing states: (1) native state; (2) small HSL; (3) talus OCA augmentation for small HSL; (4) medium HSL; (5) talus OCA augmentation for medium HSL; (6) large HSL; and (7) talus OCA augmentation for large HSL. OCA plugs were harvested from the talus allograft and placed in the most medial and superior aspect of each HSL lesion. Surface congruency was calculated as the mean absolute error and the root mean squared error in the distance. A 1-way repeated-measures analysis of variance was performed to evaluate the effects of the difference in the HSL size and associated talus OCA plugs on surface congruency and the HSL surface area. Results: The surface area analysis of the humeral head with the large (1469 ± 75 mm2), medium (1391 ± 81 mm2), and small (1230 ± 54 mm2) HSLs exhibited significantly higher surface areas than the native state (1007 ± 88 mm2; P < .001 for all sizes). The native state exhibited significantly lower surface areas as compared with after talus OCA augmentation for large HSLs (1235 ± 63 mm2; P < .001) but not for small or medium HSLs. Talus OCA augmentation yielded improved surface areas and congruency after treatment in small, medium, and large HSLs (P < .001). Conclusion: Talus OCA plug augmentation restored surface area and congruency across all tested HSLs, and the surface area was best improved with the most common HSLs-small and medium. Clinical Relevance: Talus OCA plugs may provide a viable option for restoring congruity of the shoulder in patients with recurrent anterior glenohumeral instability and an HSL.

Humeral Head Reconstruction With Osteochondral Allograft: Bone Plug Optimization for Hill-Sachs Lesions Using CT-Based Computer Modeling Analysis.

Background: Engaging Hill-Sachs lesions (HSLs) pose a significant risk for failure of surgical repair of recurrent anterior shoulder instability. Reconstruction with fresh osteochondral allograft (OCA) has been proposed as a treatment for large HSLs. Purpose: To determine the optimal characteristics of talus OCA bone plugs in a computer-simulated HSL model. Study Design: Descriptive laboratory study; Level of evidence, 6. Methods: Included were 132 patients with recurrent anterior instability with visible HSLs; patients who had multidirectional instability or previous shoulder surgery were excluded. Three-dimensional computed tomography models were constructed, and a custom computer optimization algorithm was generated to maximize bone plug surface area at the most superior apex (superiorization) and minimize its position relative to the most medial margin of the HSL defect (medialization). The optimal number, diameter, medialization, and superiorization of the bone plug(s) were reported. Percentages of restored glenoid track width and conversion from off- to on-track HSLs after bone plug optimization were calculated. Results: A total of 86 patients were included in the final analysis. Off-track lesions made up 19.7% of HSLs and, of these, the mean bone plug size was 9.9 ± 1.4 mm, with 2.2 mm ± 1.7 mm of medialization and 3.3 mm ± 2.9 mm of superiorization. The optimization identified 21% of HSLs requiring 1 bone plug, 65% requiring 2 plugs, and 14% requiring 3 plugs, with a mean overall coverage of 60%. The mean width of the restored HSLs was 68%, and all off-track HSLs (n = 17) were restored to on-track. A Jenks natural-breaks analysis calculated 3 ideal bone plug diameters of 8 mm (small), 10.4 mm (medium), and 12 mm (large) in order to convert this group of HSLs to on-track. Conclusion: Using a custom computer algorithm, we have demonstrated the optimal talus OCA bone plug diameters for reconstructing HSLs to successfully restore the HSL track and, on average, 60% of the HSL surface area and 68% of the HSL width. Clinical Relevance: Reconstructing HSLs with talus OCA is a promising treatment option with excellent fit and restoration of HSLs. This study will help guide surgeons to optimize OCA bone plugs from the humeral head, femoral head, and talus for varying sizes of HSLs.

Patient-Specific Instrumentation for Medial Closing Wedge Distal Femoral Osteotomy With Patellar Osteochondral Allograft.

The primary indications for performing a medial closing wedge distal femoral osteotomy are valgus knee malalignment, lateral knee compartment overload, lateral meniscus insufficiency, and/or lateral compartment osteoarthritis or cartilage damage. Without correction of this malalignment, there is an increased risk for chondral damage in the lateral and patellofemoral compartment of the knee. The optimal candidates for this procedure are young, active individuals with moderate to severe arthritis in the lateral compartment. Recently, preoperative planning for high tibial and distal femoral osteotomies (HTOs and DFOs) using 3-dimensional (3D) patient-specific instrumentation (PSI) has increased in popularity. Successful patient outcomes have been reported using this technique. This Technical Note illustrates our preferred technique that uses 3D PSI in addition to a patellar OCA transplant when treating a symptomatic cartilage lesion associated with genu valgum.

Outcomes of Open Versus Arthroscopic Treatment of HAGL Tears.

BACKGROUND: Lesions that involve humeral avulsions of the glenohumeral ligament (HAGLs), although less common, are primary contributors to recurrent events of dislocation and subluxation of the glenohumeral joint. PURPOSE: To describe the clinical presentation, examination, and surgical outcomes of patients presenting with HAGL lesions who underwent repair using an arthroscopic or open technique. STUDY DESIGN: Cohort study; Level of evidence, 3. METHODS: A multicenter retrospective review of prospectively collected data was performed of skeletally mature patients without glenohumeral arthritis who presented with HAGL lesions and subsequently underwent arthroscopic or open repair between 2005 and 2017. Independent variables included patient characteristics, clinical presentation, physical examination findings, and arthroscopic findings. Dependent variables included pre- and postoperative Single Assessment Numeric Evaluation (SANE) score, Western Ontario Shoulder Instability Index (WOSI) score, and range of motion outcomes. RESULTS: Eighteen patients diagnosed with a HAGL lesion who underwent primary arthroscopic repair (n = 7) or open repair (n = 11) were included. There were 17 male patients and 1 female patient with a mean age of 24.9 years (range, 16-38 years). Mean follow-up duration was 50.9 months (range, 24-160 months). Seventeen patients (94.4%) reported pain as the most common symptom, and 7 (38.9%) reported sensation of instability. Scores significantly improved from pre- to postoperative for the arthroscopic and open groups (P < .001): SANE (mean ± SD; arthroscopic, 30.7 ± 15.7 to 92.1 ± 12.2; open, 45.5 ± 8.50 to 90.7 ± 5.24) and WOSI (arthroscopic, 51.4 ± 11.4 to 2.49 ± 3.70; open, 45.5 ± 7.37 to 11.5 ± 5.76). The magnitude of improvement in SANE scores was significantly higher for patients treated arthroscopically (Δ60.0; open, Δ46.5; P = .012). Postoperative WOSI scores were also significantly better in the arthroscopic cohort (2.49 ± 3.70; open, 11.5 ± 5.76; P = .00094). CONCLUSION: Symptomatic HAGL tears present primarily with pain as opposed to instability, necessitating a high index of suspicion for injury. The tears may be treated successfully with an arthroscopic or open technique with significant improvements in patient-reported outcomes and stability.

Revision Reverse Total Shoulder Arthroplasty for Failed Anatomic Total Shoulder Arthroplasty With Massive Irreparable Rotator Cuff Tear.

Anatomic total shoulder arthroplasty (TSA) has become more common as surgical indications have expanded. However, the burden of revision shoulder arthroplasty has inevitably increased as well. Multiple studies have examined the use of reverse total shoulder arthroplasty (rTSA) as a revision option for failed anatomic TSA with a massive irreparable rotator cuff tear. Successful reconstruction of failed TSA with rTSA requires sufficient glenoid bone to place the glenoid segment, enough proximal humeral bone to allow for implantation of the humeral component, and sufficient tension in the soft-tissue envelope to ensure implant stability. In this article, we describe our preferred rTSA revision technique for the treatment of a failed TSA.

Superior Capsular Reconstruction for Irreparable Rotator Cuff Tear.

Superior capsular reconstruction (SCR) was developed as a minimally invasive, innovate technique to restore normal shoulder biomechanics for patients who present with massive, irreparable rotator cuff tear (MIRCTs) that preclude shoulder arthroplasty. Current studies have shown that SCR for MIRCTs result in excellent short-term clinical outcomes, adequate pain relief, and functional improvement with low graft failure and complication rates. This article aims to critically evaluate the biomechanics, indications, procedural considerations, clinical outcomes, rehabilitation program, and complications associated with the SCR procedure.

Anterior Closing-Wedge High Tibial Slope-Correcting Osteotomy Using Patient-Specific Preoperative Planning Software for Failed Anterior Cruciate Ligament Reconstruction.

Failure of anterior cruciate ligament reconstruction (ACLR) remains a challenging problem. Recently, the effect of increased posterior tibial slope has been identified as a risk factor for ACLR failure. In cases with increased posterior tibial slope, an anterior closing wedge, slope-correcting high tibial osteotomy can be used as a robust adjunct to revision ACLR. In this Technical Note, we demonstrate our preferred method for isolated sagittal plane correction following multiple failed ACLRs with an anterior closing-wedge high tibial osteotomy technique using 3-dimensional patient-specific instrumentation. Through correction of the angular deformity and restoration of the defined sagittal slope via the use of advanced 3-dimensional patient-specific instrumentation, this technique fosters an accurate, favorable mechanical environment to prevent recurrent instability of the knee joint.

Impact of prior anterior instability on shoulder arthroplasty outcomes: a systematic review.

Background: Anterior shoulder instability (ASI) is a frequently encountered pathology. Patients with a history of ASI have an increased rate of developing glenohumeral osteoarthritis and becoming candidates for shoulder arthroplasty. This systematic review aims to synthesize outcomes for patients undergoing shoulder arthroplasty with a history of ASI. Methods: A comprehensive literature review was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) using PubMed, Embase, OVID Medline, Scopus, CINAHL, Web of Science, and Cochrane databases for studies evaluating the impact of prior ASI on total shoulder arthroplasty (TSA), reverse TSA, and/or hemiarthroplasty outcomes, with a minimum follow-up of 12 months. Studies were graded by level of evidence and data concerning patient demographics and outcomes were extracted. Results: Sixteen articles met the inclusion criteria, including 596 patients (413 male, 181 female). The average age of the control and prior ASI groups were 57.5 and 57.0 years, respectively. Overall, 251 patients were treated operatively, 132 nonoperatively, and 213 were controls without a history of prior ASI. Shoulder arthroplasty techniques included TSA (436 shoulders), reverse TSA (130 shoulders), and hemiarthroplasty (14 shoulders). Prior anterior stabilization management included soft tissue repair, bony augmentation, and nonoperative treatment. Almost all studies reported no significant difference in subjective and functional arthroplasty outcomes between control and prior ASI groups, or between patients with prior ASI treated nonoperatively vs. surgically. Conclusion: Shoulder arthroplasty in the setting of prior ASI results in improved subjective and functional outcome scores that are comparable to patients without a history of instability.

Clinical Outcomes of Pectoralis Major Tendon Repair with and without Platelet-Rich Plasma.

Purpose: To assess clinical outcomes following pectoralis major tendon (PMT) repairs and to compare outcomes of PMT repairs augmented with and without leukocyte-poor platelet-rich plasma (LP-PRP). Methods: A retrospective review of prospectively collected data was performed of patients who underwent a PMT repair from May 2007 to June 2019 with a minimum of 2-year follow-up. Exclusion criteria included revision PMT repair, PMT reconstruction, and concomitant repair of another glenohumeral tendon/ligament. LP-PRP was injected surrounding the PMT repair before wound closure. Patient-reported outcome (PRO) data were collected preoperatively and evaluated at final follow-up using the American Shoulder and Elbow Surgeons Score (ASES), Single Assessment Numeric Evaluation Score (SANE), Quick Disabilities of the Arm, Shoulder and Hand Score (QuickDASH), and Short Form 12 physical component summary (SF-12 PCS), patient satisfaction with outcomes. Results: Twenty-three men (mean age, 38.6 years; range, 20.5-64.3 years) were included in the final analysis. Mean time from injury to surgery was 30 days (range, 3-123 days). Follow-up was obtained for 16 of 23 patients (70%) at a mean of 5.1 years (range 2.0-13.0 years). Significant improvement in PROs was observed (ASES: 59.0 → 92.4, P = .008; SANE: 44.4 → 85.9, P = .018; QuickDASH: 44.4 → 8.5, P = .018; and SF-12 PCS: 42.5 → 52.6, P = .008). Median satisfaction was 9 of 10 (range, 6-10). Patients receiving LP-PRP had superior ASES (99.6 vs 83.0, P = .001), SANE (94.8 vs 74.6, P = .005), QuickDASH (0.24 vs 19.1, P = .001), and patient satisfaction (10 vs 9, P = .037) scores compared with those without PRP. PROs were unchanged based on chronicity, mechanism of injury, or tear location. One patient had revision surgery at 3.4 years due to adhesions. Conclusions: PMT repair produces improved PROs at final follow-up when compared with preoperative values. Level of Evidence: Level III, retrospective comparative therapeutic trial.

Talar Allograft Preparation for Treatment of Reverse Hill-Sachs Defect in Recurrent Posterior Shoulder Instability.

Reverse Hill-Sachs lesions (rHSLs) after chronic posterior shoulder instability are important to recognize and treat appropriately. Treatment options for posterior instability with rHSL in the current literature are primarily based on percentage of humeral bone loss. In cases of moderate (25% to 50%) anterolateral humeral head bone loss, fresh osteochondral allografts are preferred. Recent literature has indicated that the talus serves as a robust grafting alternative site for the humeral head, as the talar dome shows high congruency and offers variable sizes. The purpose of this Technical Note is, therefore, to describe our technique for talus allograft preparation for the treatment of a large rHSL that highlights precise cutting anatomy, sizing options, and use of orthobiologics to ensure excellent talus union to the native humeral head surface.

Treatment of Failed Coracoclavicular Ligament Reconstructions: Primary Acromioclavicular Ligament and Capsular Reconstruction and Revision Coracoclavicular Ligament Reconstruction.

Acromioclavicular (AC) joint dislocations are a common injury affecting 2 of every 10,000 people in the general population and comprise 9% to 12% of all injuries to the shoulder. Most injuries occur through contact activity, which drives the acromion inferiorly with the clavicle remaining in its anatomic position, initiating a cascade of injury propagating from the AC ligament followed by failure of the coracoclavicular ligaments. Many techniques have been described for AC joint injuries, without a consensus gold standard. The revision setting offers even less consensus on treatment options and countless difficulties for surgeons. There have been more than 60 described procedures regarding AC and coracoclavicular ligament reconstructions, with significant controversy regarding the optimal intervention for each injury. When these techniques fail, it is important to pinpoint the mechanism of failure to construct a successful plan for revision. The purpose of this Technical Note is to describe our preferred method of primary AC and revision coracoclavicular reconstruction using a combination of autograft and allograft semitendinosus as well as TightRope fixation.

How to Fashion the Bone Block for Reconstruction of the Glenoid in Anterior and Posterior Instability.

BACKGROUND: Glenoid restoration techniques to address glenohumeral instability-induced anterior and posterior glenoid bone loss (AGBL and PGBL) often require reconstruction, but best-fit bone block (BFBB) modeling has not been developed. PURPOSE: To provide glenoid bony reconstruction models for anterior and posterior instability of the shoulder using a bone loss instability cohort with high-fidelity 3-dimensional (3D) imaging. STUDY DESIGN: Cross-sectional study; Level of evidence, 3. METHODS: We reviewed consecutive patients indicated for operative stabilization who had posterior glenohumeral instability and suspected GBL who underwent 2-dimensional (2D) computed tomography (CT). Patients were matched by sex, laterality, and age to patients who underwent operative stabilization of anterior glenohumeral instability. Mimics software was used to convert all 2D CT scans into 3D models of the scapula. A BFBB model was designed to digitally reconstruct GBL and was used to predict the amount, anatomic configuration, and fixation configuration of bony reconstruction required in AGBL and PGBL. RESULTS: The study included 30 patients with posterior instability and 30 patients with anterior instability; the participants' mean ± SD age was 28.8 ± 8.15 years (range, 16.0-51.0 years). Mean surface area of AGBL was 24.9% ± 7.7% (range, 14.7%-39.1%). Mean BFBB dimensions to reconstruct the anterior glenoid were determined to be a superior-inferior length of 23.9 ± 4.2 mm, anterior-posterior width of 6.4 ± 2.4 mm, and height of 1 cm. Mean angle of AGBL bone block interface relative to glenoid to reconstruct the native concavity was 79.4°± 5.9°. For PGBL, the mean surface area was 9.2% ± 5.6% (range, 3.0%-26.3%). Mean BFBB dimensions to reconstruct the posterior glenoid were a superior-inferior length of 21.9 ± 3.4 mm, width of 4.5 ± 2.3 mm, and height of 1 cm. The mean angle of PGBL bone block interface relative to the glenoid to reconstruct the native concavity was 38.6°± 14.3°. Orientation relative to the vertical glenoid axis was 77.2°± 13.8° in anterior reconstructions versus 105.9°± 10.9° in posterior reconstructions. CONCLUSION: Patients with anterior instability required a more rectangular BFBB with a bone block-glenoid interface angle of 79°, whereas patients with posterior instability required a more trapezoidal, obtusely oriented BFBB with a bone block-glenoid interface angle of 39°. BFBBs for either AGBL or PGBL can be effectively designed, and their size and/or shape can be predicted based on approximate percentage of GBL.

Qualitative and Quantitative Anatomy of the Humeral Attachment of the Pectoralis Major Muscle and Structures at Risk: A Cadaveric Study.

Background: Surgical pectoralis major (PM) repair can offer improved functional outcomes over nonoperative treatment. However, there is a lack of literature on consensus of the anatomical site of the humeral attachment. Purpose: To provide qualitative and quantitative anatomic analysis of the PM by focusing on humeral insertion and relevant structures at risk. Study Design: Descriptive laboratory study. Methods: Eight fresh-frozen male cadavers were dissected. The relevant landmarks that were collected and measured included (1) PM footprint length at the humeral insertion (total, sternal head, and clavicular head insertions); (2) PM tendon length from the humeral insertion to the musculotendinous junction; (3) distance from the PM humeral insertion to the lateral (LPN) and medial (MPN) pectoral nerves; and (4) distance from the coracoid process to the musculocutaneous nerve (MCN) in anatomical position. Results: The total PM footprint length was 81.4 mm (95% CI, 71.4-91.3). The sternal and clavicular heads that make up the PM had footprint lengths of 42.1 mm (95% CI, 32.9-51.4) and 56.6 mm (95% CI, 46.5-66.7), respectively. The PM tendon was wider at the clavicular head (74.7 mm; 95% CI, 67.5-81.7) than the sternal head insertions (43.0 mm; 95% CI, 40.1-45.9). The distances from the PM humeral insertion to LPN and MPN were 93.2 mm (95% CI, 83.1-103.3) and 103.8 mm (95% CI, 98.3-109.4), respectively. The coracoid process to MCN distance was 68.5 mm (95% CI, 60.2-76.8). Conclusion: This study successfully quantifies anatomic dimensions of the PM tendon, its sternal and clavicular head insertions, and its location relative to nearby vital structures. Such knowledge can provide surgeons with a better understanding of the PM in relation to nearby neurovascular structures during anatomic PM repair and reconstruction to avoid debilitating complications. Clinical Relevance: Knowledge of the quantitative anatomy of the PM at the humeral footprint along structures at risk may aid surgeons with identifying the injured part of the PM and improve outcomes for anatomic repair and reconstruction.

Fresh Distal Tibial Allograft: An Updated Graft Preparation Technique for Anterior Shoulder Instability.

Fresh distal tibia allograft (DTA) has been gaining popularity among surgeons as an anatomic reconstruction option for the treatment of significant glenoid bone loss. Fresh DTA results in a clinically stable joint with excellent clinical outcomes and minimal graft resorption, and it has similar outcomes as the Latarjet procedure. Proper graft preparation and fixation are critical to ensuring optimal outcomes. The purpose of this Technical Note is, therefore, to describe our updated technique for DTA preparation that highlights precise cutting anatomy, sizing options, and use of orthobiologics to optimize distal tibia graft union to the native glenoid surface.

Reverse Total Shoulder Arthroplasty for Treatment of Massive, Irreparable Rotator Cuff Tear.

Massive tears of the rotator cuff can result in severe functional deficits due to loss of the axial force couple and effective fulcrum that the intact cuff normally provides. For massive, irreparable rotator cuff tears, especially in the setting of early to moderate degenerative changes, reverse total shoulder arthroplasty functions to modify the center of joint rotation, allowing the deltoid and intact components of the cuff to carry out shoulder function more effectively. Our preferred technique uses a standard open deltopectoral shoulder approach with a 3-dimensional glenoid baseplate model and a 135° prosthesis in an onlay configuration to reduce the risk of scapular notching and increase lateralization of the humerus.

Primary Distal Tibia Allograft for Restoration of Glenohumeral Stability with Anterior Glenoid Bone Loss.

Recurrent shoulder instability with glenoid bone deficiency remains an increasing risk for failed shoulder stabilization surgery. Numerous free bone block procedures for primary treatment of anterior shoulder stability have been introduced as an alternative for the Latarjet procedure, including both autografts and allografts. Among such options is the fresh distal tibial allograft (DTA), a dense weightbearing bone without donor site morbidity and excellent conformity to the native glenoid. The aim of this Technical Note is therefore to describe our surgical technique for use of fresh DTA as a free bone block choice in the setting of primary anterior glenoid reconstruction in a patient with recurrent shoulder instability.

Anterior and posterior glenoid bone loss in patients receiving surgery for glenohumeral instability is not the same: a comparative 3-dimensional imaging analysis.

Background: Anterior and posterior glenoid bone loss morphology have both been individually and morphologically described in previous studies. While there exists substantial literature on anterior bone loss, and emerging evidence describing posterior bone loss, a direct comparison between the two is lacking in the current literature. The purpose of this study is to quantitatively compare the anatomic and morphological differences in glenoid bone loss (GBL) in operative patients with anterior versus posterior glenohumeral instability. Methods: All patients over a 3-year period indicated for operative stabilization with posterior glenohumeral instability and suspected glenoid bone loss who underwent a computed tomography (CT) scan were reviewed. Included patients were then singularly matched by gender, laterality, and age (±3 years) to a collection of patients who presented for operative stabilization of anterior glenohumeral instability. GBL parameters were assessed based on the following characterizing measurements: (1) percentage of GBL, (2) glenoid vault version, (3) slope of the glenoid defect relative to the glenoid surface, (4) superior-inferior defect height, and (5) anterior-posterior defect width. Results: Sixty patients (30 anterior GBL, 30 posterior GBL) were included in the final analysis (60 males), with a mean age of 28.8 ± 8.15 years (range 16.0 to 51.0 years). Patients with anterior instability presented with higher GBL (24.94% ± 7.69 vs. 9.22% ± 5.58, P < .001), greater superior-inferior defect height (23.89 ± 4.21 mm vs. 21.88 ± 3.42 mm, P = .047), and steeper slope of glenoid defect (58.80° ± 11.86 vs. 38.59° ± 14.30, P < .001), while patients with posterior instability had greater retroversion (1.53° ± 4.04 vs. 7.59° ± 7.71, P < .001). Additionally, the anterior instability cohort had significantly more patients with moderate- to high-grade glenoid bone loss (n = 30) than patients with posterior instability (n = 11) (P < .001). Conclusion: Anterior instability presents with a steeper slope of glenoid defect, higher percentage GBL, and greater superior-inferior defect height, whereas posterior instability presents with greater retroversion. This underscores the finding that anterior and posterior instability bone loss are not the same morphologically, and this should be considered in the operative treatment of glenohumeral instability.

Depression and Anxiety Are Associated With Worse Subjective and Functional Baseline Scores in Patients With Frozen Shoulder Contracture Syndrome: A Systematic Review.

Purpose: To investigate whether psychological factors, such as avoidance behavior, fear, pain catastrophization, kinesiophobia, anxiety, depression, optimism, and expectation are associated with different subjective and functional baseline scores in patients with frozen shoulder contracture syndrome (FSCS). Methods: Searches were conducted in MEDLINE, Cochrane Library (CENTRAL Database), PEDro, Pubpsych, and PsychNET.APA without restrictions applied to language, date, or status of publication. Two authors reviewed study titles, abstract, and full text based on the following inclusion criteria: adult population (≥ 30 < 70 years old) with FSCS. Results: Seven hundred and seventy-six records were included by the search strategies. After title final screening, 6 studies were included for the qualitative synthesis. Psychological features investigated were anxiety, depression, pain-related fear, pain catastrophizing, and pain self-efficacy; reported outcomes included pain, function, disability, quality of life, and range of motion. Data suggest that anxiety and depression impact self-assessed function, pain, and quality of life. There is no consensus on the correlation between psychological variables and range of motion. Associations were suggested between pain-related fear, pain-related beliefs, and pain-related behavior and perceived arm function; pain-related conditions showed no significant correlation with range of motion and with perceived stiffness at baseline. Conclusion: Scores traditionally thought to assess physical dimensions like shoulder pain, disability, and function seem to be influenced by psychological variables. In FSCS patients, depression and anxiety were associated with increased pain perception and decreased function and quality of life at baseline. Moreover, pain-related fear and catastrophizing seem to be associated with perceived arm function.