RESUMEN
BACKGROUND: There has recently been increased interest in biodegradable and sustainable packaging within the food industry. Biopolymer materials based on renewable biomass can be used as alternatives to conventional plastic packaging. A corn protein, zein, possesses excellent film-forming properties because of its hydrophobic nature. It can be used for making edible films and for producing nanofibrous layers. Combination with polysaccharides like chitosan offers promising prospects for the production of delivery systems for the controlled release of active substances. The current trend is to minimize the content of chemical additives; thus essential oils are suitable alternatives to synthetic antimicrobials. RESULTS: This study aimed to develop various zein/chitosan-based film-forming solutions, films, and coatings with antimicrobial substances to prepare active food packaging. Thymol and three essential oils (thyme, cinnamon, oregano) were applied as bioactive ingredients against bacteria, yeasts, and fungi. The incorporation of these natural active compounds led to a decrease in particle size in most film-forming solutions and a reduction of zeta potential compared to controls. Release of the bioactive compound into an aqueous environment was proved by antimicrobial test. A zein/chitosan-based coating with thymol was applied on fresh strawberries. Microbiological analysis over 10 days confirmed the efficient control of bacterial and fungal growth. CONCLUSION: Zein/chitosan (7:1) systems are suitable as bioactive compound carriers to make barriers and to prevent moisture loss, ensuring microbial food quality and prolonging the shelf life of fruits. These systems can serve as sustainable active food packaging. © 2022 Society of Chemical Industry.
Asunto(s)
Antiinfecciosos , Quitosano , Aceites Volátiles , Zeína , Aceites Volátiles/química , Embalaje de Alimentos , Timol , Quitosano/química , Zeína/química , Antiinfecciosos/químicaRESUMEN
The amount of poly(vinyl butyral) (PVB) foils added to car windscreens to suppress glass shattering represents a huge worldwide volume of the material, and once a vehicle is end-of-life it also becomes a significance contributor to landfill. The recycling of PVB materials from windscreens has been expensive and despite improvements in recycling technologies, the landfill burden still increases. However, an increase in oil prices can shift the economic balance and stimulates the possible applicability of recycled PVB. As PVB is a relatively easy electrospinnable material, it is shown that nanofibrous mats produced from recycled PVB blends in ethanol exhibit very good sound-absorbing properties. To achieve an optimal composition between virgin and recycled PVB blends, a series of their ratios was consecutively characterized using various techniques (rheometry, SEM, FTIR, DSC, TGA, DMA, an impedance tube for determining sound absorbance). The best result was obtained with two wt. portions of 8 wt.% solution of virgin PVB in ethanol and one wt. portion of 12 wt.% solution of recycled PVB in ethanol.
RESUMEN
Nanofibers have become a promising material in many industries in recent years, mainly due to their various properties. The only disadvantage of nanofibers as a potential filtration membrane is their short life due to clogging by bacteria in water treatment. The enrichment of nanofibers with active molecules could prevent these negative effects, represented by essential oils components such as Thymol, Eugenol, Linalool, Cinnamaldehyde and Carvacrol. Our study deals with the preparation of electrospun polyvinylidene difluoride (PVDF)-based nanofibers with incorporated essential oils, their characterization, testing their antibacterial properties and the evaluation of biofilm formation on the membrane surface. The study of the nanofibers' morphology points to the nanofibers' diverse fiber diameters ranging from 570 to 900 nm. Besides that, the nanofibers were detected as hydrophobic material with wettability over 130°. The satisfactory results of PVDF membranes were observed in nanofibers enriched with Thymol and Eugenol that showed their antifouling activity against the tested bacteria Escherichia coli ATCC 25922 and Staphylococcus aureus ATCC 25923. Therefore, these PVDF membranes could find potential applications as filtration membranes in healthcare or the environment.
Asunto(s)
Incrustaciones Biológicas , Nanofibras , Aceites Volátiles , Aceites Volátiles/farmacología , Eugenol/farmacología , Timol/farmacología , Incrustaciones Biológicas/prevención & control , Antibacterianos/farmacología , Antibacterianos/química , Escherichia coliRESUMEN
The process of electrospinning polymer solutions depends on many entry parameters, with each having a significant impact on the overall process and where complexity prevents the expression of their interplay. However, under the assumption that most parameters are fixed, it is possible to evaluate the mutual relations between pairs or triples of the chosen parameters. In this case, the experiments were carried out with a copolymer poly(vinylidene-co-hexafluoropropylene) solved in mixed N,N'-dimethylformamide (DMF)/acetone solvent for eight polymer concentrations (8, 10, 12, 15, 18, 21, 24, and 27 wt.%) and five DMF/acetone ratios (1/0, 4/1, 2/1, 1/1, 1/2). Processing of the obtained data (viscosity, mean nanofiber diameter) aimed to determine algebraic expressions relating both to viscosity and a mean nanofiber diameter with polymer concentration, as well as DMF/acetone ratio. Moreover, a master curve relating these parameters with no fitting factors was proposed continuously covering a sufficiently broad range of concentration as well as DMF/acetone ratio. A comparison of algebraic evaluation with the experimental data seems to be very good (the mean deviation for viscosity was about 2%, while, for a mean nanofiber diameter was slightly less than 10%).
RESUMEN
In this study, fibrous membranes from recycled-poly(ethylene terephthalate)/silk fibroin (r-PSF) were prepared by electrospinning for filtration applications. The effect of silk fibroin on morphology, fibers diameters, pores size, wettability, chemical structure, thermo-mechanical properties, filtration efficiency, filtration performance, and comfort properties such as air and water vapor permeability was investigated. The filtration efficiency (FE) and quality factor (Qf), which represents filtration performance, were calculated from penetration through the membranes using aerosol particles ranging from 120 nm to 2.46 µm. The fiber diameter influenced both FE and Qf. However, the basis weight of the membranes has an effect, especially on the FE. The prepared membranes were classified according to EN149, and the most effective was assigned to the class FFP1 and according to EN1822 to the class H13. The impact of silk fibroin on the air permeability was assessed. Furthermore, the antibacterial activity against bacteria S. aureus and E. coli and biocompatibility were evaluated. It is discussed that antibacterial activity depends not only on the type of used materials but also on fibrous membranes' surface wettability. In vitro biocompatibility of the selected samples was studied, and it was proven to be of the non-cytotoxic effect of the keratinocytes (HaCaT) after 48 h of incubation.
RESUMEN
The efficiency of filtration membranes is substantially lowered by bacterial attachments and potential fouling processes, which reduce their durability and lifecycle. The antibacterial and antifouling properties exhibited by the added materials play a substantial role in their application. We tested a material poly(vinylidene fluoride)-co-hexafluoropropylene (PDVF-co-HFP) based on an electrospun copolymer, where an agent was incorporated with a small amount of ester of glycerol consecutively with caprylic, capric, and lauric acids. Each of these three materials differing in the esters (1-monoacylglycerol, 1-MAG) used was prepared with three weighted concentrations of 1-MAG (1, 2, and 3 wt %). The presence of 1-MAG with an amphiphilic structure resulted in the hydrophilic character of the prepared materials that contributed to the filtration performance. The tested materials (membranes) were characterized with rheological, optical (scanning electron microscopy, SEM), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and other methods to evaluate antibacterial and antifouling activities. The pure water flux was 6 times higher than that of the neat PVDF-co-HFP membrane when the added 1-MAG attained only 1 wt %. It was experimentally shown that the PVDF-co-HFP/1-MAG membrane with high wettability improved antibacterial activity and antifouling ability. This membrane is highly promising for water treatment due to the safety of antibacterial 1-MAG additives.
Asunto(s)
Antibacterianos/farmacología , Polímeros de Fluorocarbono/farmacología , Monoglicéridos/farmacología , Nanofibras/química , Polivinilos/farmacología , Antibacterianos/química , Biopelículas/efectos de los fármacos , Incrustaciones Biológicas/prevención & control , Escherichia coli/efectos de los fármacos , Escherichia coli/fisiología , Filtración/instrumentación , Polímeros de Fluorocarbono/química , Membranas Artificiales , Pruebas de Sensibilidad Microbiana , Monoglicéridos/química , Polivinilos/química , Staphylococcus aureus/efectos de los fármacos , Staphylococcus aureus/fisiología , HumectabilidadRESUMEN
In modern society, it is impossible to imagine life without polymeric materials. However, managing the waste composed of these materials is one of the most significant environmental issues confronting us in the present day. Recycling polymeric waste is the most important action currently available to reduce environmental impacts worldwide and is one of the most dynamic areas in industry today. Utilizing this waste could not only benefit the environment but also promote sustainable development and circular economy management. In its program statement, the European Union has committed to support the use of sorted polymeric waste. This study reviews recent attempts to recycle this waste and convert it by alternative technologies into fine, nano-, and microscale fibers using electrospinning, blowing, melt, or centrifugal spinning. This review provides information regarding applying reprocessed fine fibers in various areas and a concrete approach to mitigate the threat of pollution caused by polymeric materials.
RESUMEN
Electrospinning represents the very effective process of producing nanofibrous mats. This process is influenced by a number of mutually and strongly interlaced entry parameters (characteristics of polymer, solvent, process parameters) and their participation in the resulting nanofiber quality. The appearance of nanofibers is a result of the necessary primary experimental parameter setting within an acceptable range. However, finer analysis of nanofiber quality depends on the proper choice of these individual factors. The aim of this contribution is to evaluate one of the key factors-polymer concentration-with respect to the presence or absence of bead formation. This passage can be approximated by rheological oscillatory measurements when a sudden decrease in phase angle indicates this change. It replaces otherwise time- and cost-consuming trial-and-error experiments. This approach was tested using three different materials: solutions of poly(vinylidene fluoride-co-hexafluoropropylene), poly(vinyl butyral), and poly(ethylene oxide).
RESUMEN
Zein is renewable plant protein with valuable film-forming properties that can be used as a packaging material. It is known that the addition of natural cross-linkers can enhance a film's tensile properties. In this study, we aimed to prepare antimicrobial zein-based films enriched with monolaurin, eugenol, oregano, and thyme essential oil. Films were prepared using the solvent casting technique from ethanol solution. Their physicochemical properties were investigated using structural, morphological, and thermal techniques. Polar and dispersive components were analyzed using two models to evaluate the effects on the surface free energy values. The antimicrobial activity was proven using a disk diffusion method and the suppression of bacterial growth was confirmed via a growth kinetics study with the Gompertz function. The films' morphological characteristics led to systems with uniform distribution of essential oils or eugenol droplets combined with a flat-plated structure of monolaurin. A unique combination of polyphenolic eugenol and amphiphilic monoglyceride provided highly stretchable films with enhanced barrier properties and efficiency against Gram-positive and Gram-negative bacteria, yeasts, and molds. The prepared zein-based films with tunable surface properties represent an alternative to non-renewable resources with a potential application as active packaging materials.
Asunto(s)
Eugenol/farmacología , Embalaje de Alimentos , Lauratos/farmacología , Monoglicéridos/farmacología , Aceites Volátiles/farmacología , Zeína/farmacología , Antibacterianos/farmacología , Antifúngicos/farmacología , Fenómenos Biomecánicos/efectos de los fármacos , Rastreo Diferencial de Calorimetría , Escherichia coli/efectos de los fármacos , Microscopía de Fuerza Atómica , Permeabilidad , Espectroscopía Infrarroja por Transformada de Fourier , Staphylococcus aureus/efectos de los fármacos , Vapor , Propiedades de Superficie , HumectabilidadRESUMEN
Wasted synthetic fabrics are a type of textile waste source; the reuse of them brings environmental protection and turns waste into a valuable material. In this work, the used nylon (polyamide) stockings were transmuted into a fine fibrous membrane via an electrospinning process. In addition, the safety antibacterial agent, monoacylglycerol (MAG), was incorporated into a recycled fibrous membrane. The results revealed that the neat, recycled polyamide (rPA) fibers with a hydrophobic surface could be converted into hydrophilic fibers by blending various amounts of MAG with rPA solution prior to electrospinning. The filtration efficiency and air/water vapor permeability of the two types of produced membranes, neat rPA, and rPA/MAG, were tested. Their filtration efficiency (E100) was more than 92% and 96%, respectively. The membranes were classified according to Standard EN1822, and therefore, the membranes rPA and rPA/MAG were assigned to the classes E10 and E11, respectively. The air permeability was not affected by the addition of MAG, and water vapor permeability was slightly enhanced. Based on the obtained data, prepared rPA/MAG fibrous membranes can be evaluated as antifouling against both tested bacterial strains and antimicrobial against S. aureus.
RESUMEN
Atopic dermatitis (eczema) is a widespread disorder, with researchers constantly looking for more efficacious treatments. Natural oils are reported to be an effective therapy for dry skin, and medical textiles can be used as an alternative or supporting therapy. In this study, fibrous membranes from poly(vinyl butyral-co-vinyl alcohol-co-vinyl acetate) (PVB) with low and high molecular weights were manufactured to obtain nano- and micrometer fibers via electrospinning for the designed patches used as oil carriers for atopic skin treatment. The biocompatibility of PVB patches was analyzed using proliferation tests and scanning electron microscopy (SEM), which combined with a focused ion beam (FIB) allowed for the 3D visualization of patches. The oil spreading tests with evening primrose, black cumin seed, and borage were verified with cryo-SEM, which showed the advantage nanofibers have over microfibers as carriers for low-viscosity oils. The skin tests expressed the usability and the enhanced oil delivery performance for electrospun patches. We demonstrate that through the material nano- and microstructure, commercially available polymers such as PVB have great potential to be deployed as a biomaterial in medical applications, such as topical treatments for chronic skin conditions.
RESUMEN
Monoacylglycerols (MAGs) have proven of great interest to the foodstuffs industry due to the promising antibacterial activity they show for controlling microbial contamination. Prior to this paper, this antibacterial agent had not been incorporated in a nanofibrous membrane. This study details convenient fabrication of nanofibrous membranes based on polyvinyl butyral (PVB) containing various concentrations of monocaprin (MAG 10) by an electrospinning process. Increasing the concentration of MAG 10 caused differences to appear in the shape of the nanofibers, in addition to which the level of wettability was heightened. Besides exhibiting antibacterial properties, the functional membranes demonstrated especially good antifouling activity. The novel and efficient nanofibrous membranes described have the potential to find eventual application in medical or environmental fields.
RESUMEN
Post-process thermal treatment of electrospun fibers obtained from poly(ethylene oxide) (PEO) water and methanol solutions was examined. PEO fibers from methanol solution showed larger diameters as observed by scanning electron microscopy. Fibers both from water and methanol solutions exhibited a significant dimensional stability and surface cracking during the specific exposure time after thermal treatments at 40, 50, and 60 °C. Changes in crystallinity after the thermal treatment were studied by wide-angle X-ray diffraction. The kinetics of secondary crystallization were positively influenced by the as-processed level of the amorphous phase and temperature of thermal treatment. Samples treated at 60 °C were degraded by thermooxidation within the time.
RESUMEN
Poly(lactic acid)-block-poly(oxirane)s (PLA-b-POE) of various compositions were prepared using a one-pot approach and then extended in a reaction with l-lysine diethyl ester diisocyanate, thereby forming polyester-ether-urethanes (PEU) with prolonged chains and units with increased degradability. The PEUs are processed by electrospinning to prepare degradable nanofibrous sheet materials with and without encapsulating the antibiotic Vancomycin (VAC). PLA block isomerism and POE blocks oligomeric content (1000 g/mol) affect the thermal properties, processability, nanofibrous sheet morphology, abiotic degradation, cytocompatibility, and encapsulated antibiotic release rate of prepared PEUs. Therefore, our findings provide an effective approach to tuning the functional properties of these advanced biocompatible materials. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 2378-2387, 2019.
Asunto(s)
Antibacterianos , Sistemas de Liberación de Medicamentos , Ensayo de Materiales , Nanofibras/química , Vancomicina , Animales , Antibacterianos/química , Antibacterianos/farmacología , Ratones , Células 3T3 NIH , Poliésteres/química , Poliésteres/farmacología , Polietilenglicoles/química , Polietilenglicoles/farmacología , Poliuretanos/química , Poliuretanos/farmacología , Vancomicina/química , Vancomicina/farmacologíaRESUMEN
The study investigates the content of microplastic particles in freshwater and drinking water. Specifically, three water treatment plants (WTPs) supplied by different kinds of water bodies were selected and their raw and treated water was analysed for microplastics (MPs). Microplastics were found in all water samples and their average abundance ranged from 1473⯱â¯34 to 3605⯱â¯497â¯particlesâ¯L-1 in raw water and from 338⯱â¯76 to 628⯱â¯28â¯particlesâ¯L-1 in treated water, depending on the WTP. This study is one of very few that determine microplastics down to the size of 1⯵m, while MPs smaller than 10⯵m were the most plentiful in both raw and treated water samples, accounting for up to 95%. Further, MPs were divided into three categories according to their shape. Fragments clearly prevailed at two of the WTPs and fibres together with fragments predominated at one case. Despite 12 different materials forming the microplastics being identified, the majority of the MPs (>70%) comprised of PET (polyethylene terephthalate), PP (polypropylene) and PE (polyethylene). This study contributes to fill the knowledge gap in the field of emerging microplastic pollution of drinking water and water sources, which is of concern due to the potential exposure of microplastics to humans.
Asunto(s)
Agua Potable/química , Monitoreo del Ambiente , Plásticos/análisis , Contaminantes Químicos del Agua/análisis , Agua DulceRESUMEN
Magnetic nanoparticles of spinel nanocrystalline cobalt ferrite were synthesized via the sol-gel method and subsequent annealing. The influence of the annealing temperature on the structure, magnetic properties, and magnetorheological effect was investigated. The finite crystallite size of the particles, determined by X-ray diffraction and the particle size observed via transmission electron microscopy, increased with the annealing temperature. The magnetic properties observed via a vibrating sample magnetometer showed that an increase in the annealing temperature leads to the increase in the magnetization saturation and, in contrast, a decrease in the coercivity. The effect of annealing on the magnetic properties of ferrite particles has been explained by the recrystallization process at high temperatures. This resulted in grain size growth and a decrease in an imposed stress relating to defects in the crystal lattice structure of the nanoparticles. The magnetorheological characteristics of suspensions of ferrite particles in silicone oil were measured using a rotational rheometer equipped with a magnetic field generator in both steady shear and small-strain oscillatory regimes. The magnetorheological performance expressed as a relative increase in the magnetoviscosity appeared to be significantly higher for suspensions of particles annealed at 1000 °C.
RESUMEN
Sedimentation of particles in magnetorheological suspensions represents a crucial problem that concerns their efficient long-term application in practice. Prepared carbonyl iron (CI) microparticles coated with a low density substance, cholesteryl chloroformate, via a two-step reaction and immersed in silicone oil, exhibit three positive aspects: (1) the CI particle modification increased the compatibility between the particles and the silicone oil resulting in improved long-term stability (reduction in sedimentation); (2) the coating provided the particles with enhanced thermal stability in the oxygen atmosphere; and (3) rheological measurements proved a promising magnetorheological performance at different particle weight fractions.