A surface loop directs conformational switching of a lipoyl domain between a folded and a novel misfolded structure.

A prominent surface loop links the first two beta strands of the lipoyl domain (E2plip) from the pyruvate dehydrogenase multienzyme complex of Escherichia coli. We show here that shortening this loop by two residues generates a protein that populates two structurally distinct stable conformers: an active, native-like monomer (HM) and a functionally compromised misfolded dimer (LM). Conversion of LM to HM was observed after exposure to temperatures above 50 degrees C. Removal of two additional residues from the loop caused the protein to adopt exclusively the misfolded conformation. Detailed NMR structural studies of the misfolded dimer reveal that the N-terminal half of the domain was unfolded and dynamic, whereas the C-terminal halves of two monomers had associated to form a structure with two-fold symmetry and a topology mimicking that of the folded monomer. The surface loop is therefore a hitherto unsuspected determinant in the folding process that leads to a functional protein.

Extended polypeptide linkers establish the spatial architecture of a pyruvate dehydrogenase multienzyme complex.

Icosahedral pyruvate dehydrogenase (PDH) enzyme complexes are molecular machines consisting of a central E2 core decorated by a shell of peripheral enzymes (E1 and E3) found localized at a distance of approximately 75-90 A from the core. Using a combination of biochemical, biophysical, and cryo-electron microscopic techniques, we show here that the gap between the E2 core and the shell of peripheral enzymes is maintained by the flexible but extended conformation adopted by 60 linker polypeptides that radiate outwards from the inner E2 core, irrespective of the E1 or E3 occupancy. The constancy of the gap is thus not due to protein-protein interactions in the outer protein shell. The extended nature of the E2 inner-linker regions thereby creates the restricted annular space in which the lipoyl domains of E2 that carry catalytic intermediates shuttle between E1, E2, and E3 active sites, while their conformational flexibility facilitates productive encounters.

The role of loop and beta-turn residues as structural and functional determinants for the lipoyl domain from the Escherichia coli 2-oxoglutarate dehydrogenase complex.

The lipoyl domain of the dihydrolipoyl succinyltransferase (E2o) component of the 2OGDH (2-oxoglutarate dehydrogenase) multienzyme complex houses the lipoic acid cofactor through covalent attachment to a specific lysine side chain residing at the tip of a beta-turn. Residues within the lipoyl-lysine beta-turn and a nearby prominent loop have been implicated as determinants of lipoyl domain structure and function. Protein engineering of the Escherichia coli E2o lipoyl domain (E2olip) revealed that removal of residues from the loop caused a major structural change in the protein, which rendered the domain incapable of reductive succinylation by 2-oxoglutarate decarboxylase (E1o) and reduced the lipoylation efficiency. Insertion of a new loop corresponding to that of the E. coli pyruvate dehydrogenase lipoyl domain (E2plip) restored lipoylation efficiency and the capacity to undergo reductive succinylation returned, albeit at a lower rate. Exchange of the E2olip loop sequence significantly improved the ability of the domain to be reductively acetylated by pyruvate decarboxylase (E1p), retaining approx. 10-fold more acetyl groups after 25 min than wild-type E2olip. Exchange of the beta-turn residue on the N-terminal side of the E2o lipoyl-lysine DK(A)/(V) motif to the equivalent residue in E2plip (T42G), both singly and in conjunction with the loop exchange, reduced the ability of the domain to be reductively succinylated, but led to an increased capacity to be reductively acetylated by the non-cognate E1p. The T42G mutation also slightly enhanced the lipoylation rate of the domain. The surface loop is important to the structural integrity of the protein and together with Thr42 plays an important role in specifying the interaction of the lipoyl domain with its partner E1o in the E. coli 2OGDH complex.

Crystal structure of the E1 component of the Escherichia coli 2-oxoglutarate dehydrogenase multienzyme complex.

The thiamine-dependent E1o component (EC 1.2.4.2) of the 2-oxoglutarate dehydrogenase complex catalyses a rate-limiting step of the tricarboxylic acid cycle (TCA) of aerobically respiring organisms. We describe the crystal structure of Escherichia coli E1o in its apo and holo forms at 2.6 A and 3.5 A resolution, respectively. The structures reveal the characteristic fold that binds thiamine diphosphate and resemble closely the alpha(2)beta(2) hetero-tetrameric E1 components of other 2-oxo acid dehydrogenase complexes, except that in E1o, the alpha and beta subunits are fused as a single polypeptide. The extended segment that links the alpha-like and beta-like domains forms a pocket occupied by AMP, which is recognised specifically. Also distinctive to E1o are N-terminal extensions to the core fold, and which may mediate interactions with other components of the 2-oxoglutarate dehydrogenase multienzyme complex. The active site pocket contains a group of three histidine residues and one serine that appear to confer substrate specificity and the capacity to accommodate the TCA metabolite oxaloacetate. Oxaloacetate inhibits E1o activity at physiological concentrations, and we suggest that the inhibition may allow coordinated activity within the TCA cycle. We discuss the implications for metabolic control in facultative anaerobes, and for energy homeostasis of the mammalian brain.

Distinct modes of recognition of the lipoyl domain as substrate by the E1 and E3 components of the pyruvate dehydrogenase multienzyme complex.

Two-dimensional (15)N-heteronuclear single-quantum coherence (HSQC) NMR studies with a di-domain (lipoyl domain+ linker+ peripheral subunit-binding domain) of the dihydrolipoyl acetyltransferase (E2) component of the pyruvate dehydrogenase complex of Bacillus stearothermophilus allowed a molecular comparison of the need for lipoic acid to be covalently attached to the lipoyl domain in order to undergo reductive acetylation by the pyruvate decarboxylase (E1) component, in contrast with the ability of free lipoic acid to serve as substrate for the dihydrolipoyl dehydrogenase (E3) component. Tethering the lipoyl domain to the peripheral subunit-binding domain in a complex with E1 or E3 rendered the system more like the native enzyme complex, compared with the use of a free lipoyl domain, yet of a size still amenable to investigation by NMR spectroscopy. Recognition of the tethered lipoyl domain by E1 was found to be ensured by intensive interaction with the lipoyl-lysine-containing beta-turn and with residues in the protruding loop close to the beta-turn. The size and sequence of this loop varies significantly between species and dictates the lipoylated lipoyl domain as the true substrate for E1. In contrast, with E3 the main interaction sites on the tethered lipoyl domain were revealed as residues Asp41 and Ala43, which form a conserved sequence motif, DKA, around the lipoyl-lysine residue. No domain specificity is observed at this step and substrate channelling in the complex thus rests on the recognition of the lipoyl domain by the first enzyme, E1. The cofactor, thiamine diphosphate, and substrate, pyruvate, had distinct but contrasting effects on the E1/di-domain interaction, whereas NAD(+) and NADH had negligible effect on the E3/di-domain interaction. Tethering the lipoyl domain did not significantly change the nature of its interaction with E1 compared with a free lipoyl domain, indicative of the conformational freedom allowed by the linker in the movement of the lipoyl domain between active sites.

Structure of a putative lipoate protein ligase from Thermoplasma acidophilum and the mechanism of target selection for post-translational modification.

Lipoyl-lysine swinging arms are crucial to the reactions catalysed by the 2-oxo acid dehydrogenase multienzyme complexes. A gene encoding a putative lipoate protein ligase (LplA) of Thermoplasma acidophilum was cloned and expressed in Escherichia coli. The recombinant protein, a monomer of molecular mass 29 kDa, was catalytically inactive. Crystal structures in the absence and presence of bound lipoic acid were solved at 2.1 A resolution. The protein was found to fall into the alpha/beta class and to be structurally homologous to the catalytic domains of class II aminoacyl-tRNA synthases and biotin protein ligase, BirA. Lipoic acid in LplA was bound in the same position as biotin in BirA. The structure of the T.acidophilum LplA and limited proteolysis of E.coli LplA together highlighted some key features of the post-translational modification. A loop comprising residues 71-79 in the T.acidophilum ligase is proposed as interacting with the dithiolane ring of lipoic acid and discriminating against the entry of biotin. A second loop comprising residues 179-193 was disordered in the T.acidophilum structure; tryptic cleavage of the corresponding loop in the E.coli LplA under non-denaturing conditions rendered the enzyme catalytically inactive, emphasizing its importance. The putative LplA of T.acidophilum lacks a C-terminal domain found in its counterparts in E.coli (Gram-negative) or Streptococcus pneumoniae (Gram-positive). A gene encoding a protein that appears to have structural homology to the additional domain in the E.coli and S.pneumoniae enzymes was detected alongside the structural gene encoding the putative LplA in the T.acidophilum genome. It is likely that this protein is required to confer activity on the LplA as currently purified, one protein perhaps catalysing the formation of the obligatory lipoyl-AMP intermediate, and the other transferring the lipoyl group from it to the specific lysine residue in the target protein.

Molecular structure of a 9-MDa icosahedral pyruvate dehydrogenase subcomplex containing the E2 and E3 enzymes using cryoelectron microscopy.

The pyruvate dehydrogenase multienzyme complexes are among the largest multifunctional catalytic machines in cells, catalyzing the production of acetyl CoA from pyruvate. We have previously reported the molecular architecture of an 11-MDa subcomplex comprising the 60-mer icosahedral dihydrolipoyl acetyltransferase (E2) decorated with 60 copies of the heterotetrameric (alpha(2)beta(2)) 153-kDa pyruvate decarboxylase (E1) from Bacillus stearothermophilus (Milne, J. L. S., Shi, D., Rosenthal, P. B., Sunshine, J. S., Domingo, G. J., Wu, X., Brooks, B. R., Perham, R. N., Henderson, R., and Subramaniam, S. (2002) EMBO J. 21, 5587-5598). An annular gap of approximately 90 A separates the acetyltransferase catalytic domains of the E2 from an outer shell formed of E1 tetramers. Using cryoelectron microscopy, we present here a three-dimensional reconstruction of the E2 core decorated with 60 copies of the homodimeric 100-kDa dihydrolipoyl dehydrogenase (E3). The E2E3 complex has a similar annular gap of approximately 75 A between the inner icosahedral assembly of acetyltransferase domains and the outer shell of E3 homodimers. Automated fitting of the E3 coordinates into the map suggests excellent correspondence between the density of the outer shell map and the positions of the two best fitting orientations of E3. As in the case of E1 in the E1E2 complex, the central 2-fold axis of the E3 homodimer is roughly oriented along the periphery of the shell, making the active sites of the enzyme accessible from the annular gap between the E2 core and the outer shell. The similarities in architecture of the E1E2 and E2E3 complexes indicate fundamental similarities in the mechanism of active site coupling involved in the two key stages requiring motion of the swinging lipoyl domain across the annular gap, namely the synthesis of acetyl CoA and regeneration of the dithiolane ring of the lipoyl domain.

Identification and specificity of pilus adsorption proteins of filamentous bacteriophages infecting Pseudomonas aeruginosa.

Filamentous bacteriophages Pf1 and Pf3 infect Pseudomonas aeruginosa strains K and O, respectively. We show here that the capsids of these bacteriophages each contain a few copies of a minor coat protein (designated g3p) of high molecular mass, which serves as a pilus adsorption protein, much like the protein g3p of the Ff bacteriophages which infect Escherichia coli. Bacteriophage Pf1 was observed to interact with the type IV PAK pilus whereas bacteriophage Pf3 interacted with the conjugative RP4 pilus and not with the type IV PAO pilus. The specificity was found to be mediated by their pilus-binding proteins. This is evidence of a conserved pathway of infection among different classes of filamentous bacteriophage. However, there are likely to be subtle differences yet to be discovered in the way these virions effect entry into their targeted bacterial cells.

The molecular origins of specificity in the assembly of a multienzyme complex.

The pyruvate dehydrogenase (PDH) multienzyme complex is central to oxidative metabolism. We present the first crystal structure of a complex between pyruvate decarboxylase (E1) and the peripheral subunit binding domain (PSBD) of the dihydrolipoyl acetyltransferase (E2). The interface is dominated by a "charge zipper" of networked salt bridges. Remarkably, the PSBD uses essentially the same zipper to alternately recognize the dihydrolipoyl dehydrogenase (E3) component of the PDH assembly. The PSBD achieves this dual recognition largely through the addition of a network of interfacial water molecules unique to the E1-PSBD complex. These structural comparisons illuminate our observations that the formation of this water-rich E1-E2 interface is largely enthalpy driven, whereas that of the E3-PSBD complex (from which water is excluded) is entropy driven. Interfacial water molecules thus diversify surface complementarity and contribute to avidity, enthalpically. Additionally, the E1-PSBD structure provides insight into the organization and active site coupling within the approximately 9 MDa PDH complex.

Interaction of the E2 and E3 components of the pyruvate dehydrogenase multienzyme complex of Bacillus stearothermophilus. Use of a truncated protein domain in NMR spectroscopy.

A (15)N-labelled peripheral-subunit binding domain (PSBD) of the dihydrolipoyl acetyltransferase (E2p) and the dimer of a solubilized interface domain (E3int) derived from the dihydrolipoyl dehydrogenase (E3) were used to investigate the basis of the interaction of E2p with E3 in the assembly of the pyruvate dehydrogenase multienzyme complex of Bacillus stearothermophilus. Thirteen of the 55 amino acids in the PSBD show significant changes in either or both of the (15)N and (1)H amide chemical shifts when the PSBD forms a 1 : 1 complex with E3int. All of the 13 amino acids reside near the N-terminus of helix I of PSBD or in the loop region between helix II and helix III. (15)N backbone dynamics experiments on PSBD indicate that the structured region extends from Val129 to Ala168, with limited structure present in residues Asn126 to Arg128. The presence of structure in the region before helix I was confirmed by a refinement of the NMR structure of uncomplexed PSBD. Comparison of the crystal structure of the PSBD bound to E3 with the solution structure of uncomplexed PSBD described here indicates that the PSBD undergoes almost no conformational change upon binding to E3. These studies exemplify and validate the novel use of a solubilized, truncated protein domain in overcoming the limitations of high molecular mass on NMR spectroscopy.

A molecular switch and proton wire synchronize the active sites in thiamine enzymes.

Thiamine diphosphate (ThDP) is used as a cofactor in many key metabolic enzymes. We present evidence that the ThDPs in the two active sites of the E1 (EC 1.2.4.1) component of the pyruvate dehydrogenase complex communicate over a distance of 20 angstroms by reversibly shuttling a proton through an acidic tunnel in the protein. This "proton wire" permits the co-factors to serve reciprocally as general acid/base in catalysis and to switch the conformation of crucial active-site peptide loops. This synchronizes the progression of chemical events and can account for the oligomeric organization, conformational asymmetry, and "ping-pong" kinetic properties of E1 and other thiamine-dependent enzymes.

Prediction of the binding site on E1 in the assembly of the pyruvate dehydrogenase multienzyme complex of Bacillus stearothermophilus.

The beta-subunit (E1beta) of the pyruvate decarboxylase (E1, alpha(2)beta(2)) component of the Bacillus stearothermophilus pyruvate dehydrogenase complex was comparatively modelled based on the crystal structures of the homologous 2-oxoisovalerate decarboxylase of Pseudomonas putida and Homo sapiens. Based on this homology modelling, alanine-scanning mutagenesis studies revealed that the negatively charged side chain of Glu285 and the hydrophobic side chain of Phe324 are of particular importance in the interaction with the peripheral subunit-binding domain of the dihydrolipoyl acetyltransferase component of the complex. These results help to identify the site of interaction on the E1beta subunit and are consistent with thermodynamic evidence of a mixture of electrostatic and hydrophobic interactions being involved.

Interactions of the peripheral subunit-binding domain of the dihydrolipoyl acetyltransferase component in the assembly of the pyruvate dehydrogenase multienzyme complex of Bacillus stearothermophilus.

The enzymes pyruvate decarboxylase (E1) and dihydrolipoyl dehydrogenase (E3) bind tightly but in a mutually exclusive manner to the peripheral subunit-binding domain (PSBD) of dihydrolipoyl acetyltransferase in the pyruvate dehydrogenase multienzyme complex of Bacillus stearothermophilus. The use of directed mutagenesis, surface plasmon resonance detection and isothermal titration microcalorimetry revealed that several positively charged residues of the PSBD, most notably Arg135, play an important part in the interaction with both E1 and E3, whereas Met131 makes a significant contribution to the binding of E1 only. This indicates that the binding sites for E1 and E3 on the PSBD are overlapping but probably significantly different, and that additional hydrophobic interactions may be involved in binding E1 compared with E3. Arg135 of the PSBD was also replaced with cysteine (R135C), which was then modified chemically by alkylation with increasingly large aliphatic groups (R135C -methyl, -ethyl, -propyl and -butyl). The pattern of changes in the values of DeltaG degrees, DeltaH degrees and TDeltaS degrees that were found to accompany the interaction with the variant PSBDs differed between E1 and E3 despite the similarities in the free energies of their binding to the wild-type. The importance of a positive charge on the side-chain at position 135 for the interaction of the PSBD with E3 and E1 was apparent, although lysine was found to be an imperfect substitute for arginine. The results offer further evidence of entropy-enthalpy compensation ('thermodynamic homeostasis') - a feature of systems involving a multiplicity of weak interactions.

Pulling geometry defines the mechanical resistance of a beta-sheet protein.

Proteins show diverse responses when placed under mechanical stress. The molecular origins of their differing mechanical resistance are still unclear, although the orientation of secondary structural elements relative to the applied force vector is thought to have an important function. Here, by using a method of protein immobilization that allows force to be applied to the same all-beta protein, E2lip3, in two different directions, we show that the energy landscape for mechanical unfolding is markedly anisotropic. These results, in combination with molecular dynamics (MD) simulations, reveal that the unfolding pathway depends on the pulling geometry and is associated with unfolding forces that differ by an order of magnitude. Thus, the mechanical resistance of a protein is not dictated solely by amino acid sequence, topology or unfolding rate constant, but depends critically on the direction of the applied extension.

Reaction mechanism of the heterotetrameric (alpha2beta2) E1 component of 2-oxo acid dehydrogenase multienzyme complexes.

Pyruvate decarboxylase (E1) catalyzes the first two reactions of the four involved in oxidative decarboxylation of pyruvate by the pyruvate dehydrogenase (PDH) multienzyme complex. It requires thiamin diphosphate to bring about the decarboxylation of pyruvate, which is followed by the reductive acetylation of a lipoyl group covalently bound to the N(6) amino group of a lysine residue in the second catalytic component, a dihydrolipoyl acetyltransferase (E2). Replacement of two histidine residues in the E1alpha and E1beta chains of the heterotetrameric E1 (alpha(2)beta(2)) component of the PDH complex of Bacillus stearothermophilus, considered possible proton donors at the active site, was carried out. Subsequent characterization of the mutants permitted different roles to be assigned to these two particular residues in the reaction catalyzed by E1: E1alpha His271 to stabilize the dianion formed during decarboxylation of the 2-oxo acid and E1beta His128 to provide the proton required to protonate the incoming dithiolane ring in the subsequent reductive acetylation of the lipoyl goup. On the basis of these and other results from a separate investigation into the roles of individual residues in a loop region in the E1alpha chain close to the active site of E1 [Fries, M., Chauhan, H. J., Domingo, G. J., Jung, H., and Perham, R. N. (2002) Eur. J. Biochem. 270, 861-870] together with work from other laboratories, a detailed mechanism for the E1 reaction can be formulated.

Induction of specific T-helper and cytolytic responses to epitopes displayed on a virus-like protein scaffold derived from the pyruvate dehydrogenase multienzyme complex.

The icosahedral protein scaffold (1.5MDa) generated by self-assembly of the catalytic domains of the dihydrolipoyl acetyltransferase core of the pyruvate dehydrogenase multienzyme complex from Bacillus stearothermophilus has been engineered to display 60 copies of one or more peptide epitopes on a single molecule (E2DISP). An E2DISP scaffold displaying pep23, a 15-residue B- and T-helper epitope from the reverse transcriptase of HIV-1, was able to induce a pep23-specific T-helper response in cell lines in vitro. The same scaffold displaying both pep23 and peptide RT2, a nine-residue CTL epitope from HIV-1 reverse transcriptase, was able to prime an RT2-specific CD8(+) T-cell response in human cell lines in vitro and in HLA-A2 transgenic mice in vivo. This was accompanied by a humoral antibody response specific for E2DISP-presented epitopes. Thus, the icosahedral acetyltransferase core constitutes a simple and flexible scaffold for multiple epitope display with access to both cellular and humoral immune response pathways.

Site-directed mutagenesis of a loop at the active site of E1 (alpha2beta2) of the pyruvate dehydrogenase complex. A possible common sequence motif.

Limited proteolysis of the pyruvate decarboxylase (E1, alpha2beta2) component of the pyruvate dehydrogenase (PDH) multienzyme complex of Bacillus stearothermophilus has indicated the importance for catalysis of a site (Tyr281-Arg282) in the E1alpha subunit (Chauhan, H.J., Domingo, G.J., Jung, H.-I. & Perham, R.N. (2000) Eur. J. Biochem. 267, 7158-7169). This site appears to be conserved in the alpha-subunit of heterotetrameric E1s and multiple sequence alignments suggest that there are additional conserved amino-acid residues in this region, part of a common pattern with the consensus sequence -YR-H-D-YR-DE-. This region lies about 50 amino acids on the C-terminal side of a 30-residue motif previously recognized as involved in binding thiamin diphosphate (ThDP) in all ThDP-dependent enzymes. The role of individual residues in this set of conserved amino acids in the E1alpha chain was investigated by means of site-directed mutagenesis. We propose that particular residues are involved in: (a) binding the 2-oxo acid substrate, (b) decarboxylation of the 2-oxo acid and reductive acetylation of the tethered lipoyl domain in the PDH complex, (c) an "open-close" mechanism of the active site, and (d) phosphorylation by the E1-specific kinase (in eukaryotic PDH and branched chain 2-oxo acid dehydrogenase complexes).

Processing of filamentous bacteriophage virions in antigen-presenting cells targets both HLA class I and class II peptide loading compartments.

Virions of filamentous bacteriophage fd are capable of displaying multiple copies of peptide epitopes and generating powerful immune responses to them. To investigate the antigen processing mechanisms in human B cell lines used as antigen presenting cells, the major coat protein (pVIII) in intact virions was fluorescently labeled, and its localization in various intracellular compartments was followed using confocal microscopy. We show that the virions were taken up and processed to yield peptides that reach both the major histocompatibility complex (MHC) class II compartment and the endoplasmic reticulum. Moreover, when exposed to bacteriophages displaying a cytotoxic T lymphocyte (CTL) epitope from the reverse transcriptase of human immunodeficiency virus type-1 (HIV-1), B cells were lysed by specific cytotoxic lymphocytes. This confirms that filamentous bacteriophage virions are capable of being taken up and processed efficiently by MHC class I and class II pathways, even in nonprofessional antigen presenting cells. These remarkable features explain, at least in part, the unexpected ability of virions displaying foreign T-cell epitopes to prime strong T-helper-dependent CTL responses. These findings have important implications for the development of peptide-based vaccines, using filamentous bacteriophage virions as scaffolds.