Novel Aphid-Repellent Fiber Mats Based on Poly(lactic acid)-Containing Ionic Liquids.

To protect crops as well as human and animal health, the development of novel repellents based on biopolymers is critical for a growing world population. Here, novel aphid-repellent electrospun mats containing epoxidized ionic liquids (ILs) covalently bonded to the carboxyl or hydroxyl groups of poly(lactic acid) (PLA) were designed to produce nonwoven mats. First, di-, tri-, and tetra-epoxidized imidazolium ILs were synthesized and incorporated in different weight fractions (3, 5, and 10 wt %) into the PLA solution. Then, the effect of ILs' microstructure, thermal properties, mechanical performance, and hydrophobic behavior were investigated. It was found that the incorporation of ILs resulted in a reduction of the fiber diameters while the mechanical properties of the mats, i.e., the three-dimensional fibrous porous structure, were maintained. Finally, the effect of these three ILs against the pea aphid Acyrthosiphon pisum (Harris) was evaluated for the first time, showing an attractive effect for the diepoxidized IL and a repellent effect for the tri- and tetra-epoxidized ILs. By exploiting the chemical nature of ILs, an environmentally friendly strategy can be developed to limit the need for chemical pesticides and petroleum-based polymers.

Thermodynamics of Tri- and Tetraepoxyimidazolium NTf2 Amine Polyaddition: A Theoretical Perspective.

The thermodynamics of newly designed tri- and tetraepoxyimidazolium NTf2 monomers reacting with several diamines used as curing agents to form epoxy/amine thermosets was studied. The ability of each epoxy/amine combination to induce cross-linking both through the substitution of multiple epoxy groups and through multiple additions to a single amine was investigated. Through an increased understanding of the thermodynamics of epoxy-amine polymerization in complex polyepoxy-ILs, it is possible to more thoroughly understand the factors affecting the reactivity in these complex systems. These calculations showed that while each possible epoxy-amine combination was exergonic to both forms of cross-linking, the degree to which both amines-induced cross-linking and epoxy-induced cross-linking was favored varied between epoxy-amine combinations. Thermodynamic results obtained using density functional theory were experimentally validated through differential scanning calorimetry results, wherein similar trends were noted between theory and experiment. Among the trends noted in amines-epoxy combinations tested, tetraepoxyimidazolium NTf2/PACM (i.e., a cycloaliphatic diamine) was found to be a prime candidate for amine cross-linking, with the addition of a second epoxy to a single amine group being notably the most negative of all epoxy-amine combinations at -77.6 kJ mol-1. While in the case of epoxy cross-linking, the aliphatic polyetheramine denoted Jeffamine-D230-containing systems were found to be the most exergonic, with additions of primary amines to triepoxyimidazolium and tetraepoxyimidazolium NTf2 averaging -86.9 kJ mol-1. Interaction energy analysis indicated that the aromatic amine named sulfanilamide is the most favorable to engage in reactions due to having the most negative interaction energies with already highly substituted epoxy monomers. These results can be used to adjust the cross-linking possibilities of tri- and tetraepoxyimidazolium NTf2/amine polymerization and give insight into the predominant cross-linking reactions in these unique systems.

Epoxidized Ionic Liquids as Processing Auxiliaries of Poly(Lactic Acid) Matrix: Influence on the Manufacture, Structural and Physical Properties.

In this study, we set out to modify poly(lactic acid) (PLA) by incorporating epoxidized ionic liquids (ILs) that were specifically designed with imidazolium-NTf2 moieties. First, we synthesized di-, tri- and tetra-epoxidized ILs, which were incorporated into a PLA matrix at 3, 5, and 10 wt% through a melt extrusion process. We investigated the relationship between the structure and properties of the resulting materials in terms of thermal, mechanical, rheological, and surface properties. The results showed the potential of ILs to impact these properties. Notably, the tri- and tetra-epoxidized ILs enhanced the thermal stability of the PLA matrix as well as the crystallinity while reducing the glass transition temperature and melting point, which is promising for reactive extrusion processing. Overall, this research opens new routes for using reactive ILs to improve the processing and properties of PLA polymers.

Theoretical Analysis of Physical and Chemical CO2 Absorption by Tri- and Tetraepoxidized Imidazolium Ionic Liquids.

The efficient capture of CO2 from flue gas or directly from the atmosphere is a key subject to mitigate global warming, with several chemical and physical absorption methods previously reported. Through polarizable molecular dynamics (MD) simulations and high-level quantum chemical (QC) calculations, the physical and chemical absorption of CO2 by ionic liquids based on imidazolium cations bearing oxirane groups was investigated. The ability of the imidazolium group to absorb CO2 was found to be prevalent in both the tri- and tetraepoxidized imidazolium ionic liquids (ILs) with coordination numbers over 2 for CO2 within the first solvation shell in both systems. Thermodynamic analysis of the addition of CO2 to convert epoxy groups to cyclic carbonates also indicated that the overall reaction is exergonic for all systems tested, allowing for chemical absorption of CO2 to also be favored. The rate-determining step of the chemical absorption involved the initial opening of the epoxy ring through addition of the chloride anion and was seen to vary greatly between the epoxy groups tested. Among the groups tested, the less sterically hindered monoepoxy side of the triepoxidized imidazolium was shown to be uniquely capable of undergoing intramolecular hydrogen bonding and thus lowering the barrier required for the intermediate structure to form during the reaction. Overall, this theoretical investigation highlights the potential for epoxidized imidazolium chloride ionic liquids for simultaneous chemical and physical absorption of CO2.

Synthesis of Carbon Nanodots from Sugarcane Syrup, and Their Incorporation into a Hydrogel-Based Composite to Fabricate Innovative Fluorescent Microstructured Polymer Optical Fibers.

Carbon nanodots (CNDs) are interesting materials due to their intrinsic fluorescence, electron-transfer properties, and low toxicity. Here, we report a sustainable, cheap, and scalable methodology to obtain CNDs from sugarcane syrup using a domestic microwave oven. The CNDs were characterized by infrared spectroscopy, dynamic light scattering, atomic force microscopy, absorption, and emission spectroscopies. The CNDs have 3 nm in diameter with low polydispersity and are fluorescent. A fluorescent hydrogel-CNDs composite was obtained using gelatin polypeptide as the polymeric matrix. The new hydrogel-CNDs composite was incorporated in the cavities of a double-clad optical fiber using an innovative approach that resulted in a microstructured polymer optical fiber with intrinsic fluorescence. This work shows a promising alternative for the fabrication of fluorescent materials since the CNDs synthesis is sustainable and environmentally friendly. These CNDs might substitute the rare-earth and other heavy metals of high cost and toxicity, which are usually incorporated in double-clad fibers for applications on lasers, amplifiers, and spectroscopy.

Synthesis and Characterization of Dendronized Gold Nanoparticles Bearing Charged Peripheral Groups with Antimicrobial Potential.

Dendronized gold nanoparticles (AuNPs) were synthesized bearing charged peripheral groups. Two novel AB3-type dendrons were synthesized with a thiol group at the focal point followed by their attachment to AuNPs. Dendrons were designed to have nine charged peripheral groups (carboxyl or amine), glycol solubilizing, units and one thiol moiety at the focal point. Both dendrons and all intermediates were synthesized in high yields and characterized by nuclear magnetic resonance spectroscopy (NMR) and mass spectrometry (MS). The amine- and carboxyl-terminated dendrons were used to functionalize gold nanoparticles (AuNPs) previously stabilized with citrate. The nanoparticles' diameters and their colloidal stability were investigated using dynamic light scattering (DLS). The size and morphology of the dendronized AuNPs were evaluated by scanning electron microscopy (SEM), which revealed individual particles with no aggregation after replacement of citrate by the dendrons, in agreement with the DLS data. The absorption spectroscopy reveals a prominent plasmonic band at 560 nm for all AuNPs. The zeta potential further confirmed the expected charged structures of the dendronized AuNPs. Considering all the physical-chemical properties of the charged dendronized AuNPs developed in this work, these AuNPs might be used as a weapon against multi-drug resistant bacterial infections.

Self-Assembly of a Triazolylferrocenyl Dendrimer in Water Yields Nontraditional Intrinsic Green Fluorescent Vesosomes for Nanotheranostic Applications.

The promising field of nanomedicine stimulates a continuous search for multifunctional nanotheranostic systems for imaging and drug delivery. Herein, we demonstrate that application of supramolecular chemistry's concepts in dendritic assemblies can enable the formation of advanced dendrimer-based nanotheranostic devices. A dendrimer bearing 81 triazolylferrocenyl terminal groups adopts a more compact shell-like structure in polar solvents with the ferrocenyl peripheral groups backfolding toward the hydrophobic dendrimer interior, while exposing the more polar triazole moieties as the dendritic shell. Akin to lipids, the compact dendritic structure self-assembles into uniform nanovesicles that in turn self-assemble into larger vesosomes in water. The vesosomes emit green nontraditional intrinsic fluorescence (NTIL), which is an emerging property as there are no classical fluorophores in the dendritic macromolecular structure. This work confirms the hypothesis that the NTIL emission is greatly enhanced by rigidification of the supramolecular assemblies containing heteroatomic subluminophores (HASLs) and by the presence of electron rich functional groups on the periphery of dendrimers. This work is the first one detecting NTIL in ferrocenyl-terminated dendrimers. Moreover, the vesosomes are stable in biological medium, are uptaken by cells, and show cytotoxic activity against cancer cells. Accordingly, the self-organization of these dendrimers into tertiary structures promotes the emergence of new properties enabling the same component, in this case, ferrocenyl group, to function as both antitumoral drug and fluorophore.

Molecular-Level Investigation of Cycloaliphatic Epoxidised Ionic Liquids as a New Generation of Monomers for Versatile Poly(Ionic Liquids).

Recently, a new generation of polymerised ionic liquids with high thermal stability and good mechanical performances has been designed through novel and versatile cycloaliphatic epoxy-functionalised ionic liquids (CEILs). From these first promising results and unexplored chemical structures in terms of final properties of the PILs, a computational approach based on molecular dynamics simulations has been developed to generate polymer models and predict the thermo-mechanical properties (e.g., glass transition temperature and Young's modulus) of experimentally investigated CEILs for producing multi-functional polymer materials. Here, a completely reproducible and reliable computational protocol is provided to design, test and tune poly(ionic liquids) based on epoxidised ionic liquid monomers for future multi-functional thermoset polymers.

Bulk and Microfluidic Synthesis of Stealth and Cationic Liposomes for Gene Delivery Applications.

This chapter describes the synthesis of stealth and cationic liposomes and their complexation with plasmid DNA to generate lipoplexes for gene delivery applications. Two techniques are presented: a top-down approach which requires a second step of processing for downsizing the liposomes (i.e., ethanol injection method) and a microfluidic technique that explores the diffusion of ethanol in water to allow the proper lipid self-assembly. The synthesis of stealth liposomes is also a challenge since the use of poly(ethylene glycol) favors the formation of oblate micelles. In this protocol, the stealth cationic liposome synthesis by exploring the high ionic strength to overcome the formation of secondary structures like micelles is described. Finally, the electrostatic complexation between cationic liposomes and DNA is described, indicating important aspects that guarantee the formation of uniform lipoplexes.

Evaluation of Silica Nanofluids in Static and Dynamic Conditions by an Optical Fiber Sensor.

This work presents an optical fiber dynamic light scattering sensor capable of simultaneously assessing concentration and flow speed of nanofluids. Silica nanoparticles (189 nm) in water were tested, yielding a sensitivity of 0.78288 × 10³ s-1 for static conditions. Then, the sensor was submitted to situations that simulate spatial concentration changes, offering better results than those obtained by traditional mathematical models. Finally, in flow tests, the light backscattered by the nanoparticles were collected by a fiber probe placed parallel to the streamline, whereas intensity values were processed by artificial neural networks. The sensor provides average errors of 0.09 wt% and 0.26 cm/s for concentration and speed measurements, respectively, and can be further applied to assess different types of nanofluids and inline processes.

Ionic strength for tailoring the synthesis of monomodal stealth cationic liposomes in microfluidic devices.

In this work, we describe a hydrodynamic flow-focusing microfluidic process to produce stealth cationic liposomes (SCL), stabilized with poly(ethylene glycol) (PEG), with uniform and reproducible features. Through cryogenic transmission electron microscopy (cryo-TEM) characterization and real-time monitoring, we verified the formation of multi-sized lipid self-aggregates, which can be attributed to micelles formation. These structures tend to undergo deposition within the PDMS/glass microchannels through intermolecular interactions with the glass walls, hindering not only the process reproducibility but also the final biological application of the SCL products. In view of this, we propose the modulation of ionic strength of the side streams aiming to ionically shield the glass surface, decrease the intermolecular interactions of the lipid polar heads, and, essentially, to promote the bilayer-driven self-assembly of SCL with 1% of DSPE-PEG2000 lipid. Herein, we applied phosphate-buffered saline (PBS) from 10 to 50 mM concentration as side streams, and evaluated its effects on SCL final physicochemical properties in terms of size distribution, mean diameter, zeta potential and polydispersity index (PDI). We present evidences indicating that the ionic strength can be used as a microfluidic process parameter to modulate the lipids self-assembly kinetics whilst preventing micelles formation. Finally, the proposed diffusion-based microfluidic system with high ionic strength enables the formation of monodisperse (PDI < 0.2) SCL of around 140 nm with monomodal size distributions and enhanced properties when compared to usual bulk mixing.

Biodegradable and pH-Responsive Acetalated Dextran (Ac-Dex) Nanoparticles for NIR Imaging and Controlled Delivery of a Platinum-Based Prodrug into Cancer Cells.

Nanoparticles (NPs) based on the biodegradable acetalated dextran polymer (Ac-Dex) were used for near-infrared (NIR) imaging and controlled delivery of a PtIV prodrug into cancer cells. The Ac-Dex NPs loaded with the hydrophobic PtIV prodrug 3 (PtIV/Ac-Dex NPs) and with the novel hydrophobic NIR-fluorescent dye 9 (NIR-dye 9/Ac-Dex NPs), as well as Ac-Dex NPs coloaded with both compounds (coloaded Ac-Dex NPs), were assembled using a single oil-in-water nanoemulsion method. Dynamic light scattering measurements and scanning electron microscopy images showed that the resulting Ac-Dex NPs are spherical with an average diameter of 100 nm, which is suitable for accumulation in tumors via the enhanced permeation and retention effect. The new nanosystems exhibited high drug-loading capability, high encapsulation efficiency, high stability in physiological conditions, and pH responsiveness. Drug-release studies clearly showed that the PtIV prodrug 3 release from Ac-Dex NPs was negligible at pH 7.4, whereas at pH 5.5, this compound was completely released with a controlled rate. Confocal laser scanning microscopy unambiguously showed that the NIR-dye 9/Ac-Dex NPs were efficiently taken up by MCF-7 cells, and cytotoxicity assays against several cell lines showed no significant toxicity of blank Ac-Dex NPs up to 1 mg mL-1. The IC50 values obtained for the PtIV prodrug encapsulated in Ac-Dex NPs were much lower when compared with the IC50 values obtained for the free PtIV complex and cisplatin in all cell lines tested. Overall, our results demonstrate, for the first time, that Ac-Dex NPs constitute a promising drug delivery platform for cancer therapy.