RESUMEN
New designs based on S0 Lamb modes in AlN thin layer resonating structures coupled with the implementation of structural elements in SiO2, are theoretically analyzed by the Finite Element Method (FEM). This study compares the typical characteristics of different interdigital transducer (IDTs) configurations, involving either a continuous SiO2 cap layer, or structured SiO2 elements, showing their performance in the usual terms of electromechanical coupling coefficient (K2), phase velocity, and temperature coefficient of frequency (TCF), by varying structural parameters and boundary conditions. This paper shows how to reach temperature-compensated, high-performance resonator structures based on ribbon-structured SiO2 capping. The addition of a thin diamond layer can also improve the velocity and electromechanical coupling coefficient, while keeping zero TCF and increasing the solidity of the membranes. Beyond the increase in performance allowed by such resonator configurations, their inherent structure shows additional benefits in terms of passivation, which makes them particularly relevant for sensing applications in stern environments.
RESUMEN
Polarization of electromagnetic waves plays an extremely important role in interaction of radiation with matter. In particular, interaction of polarized waves with ordered matter strongly depends on orientation and symmetry of vibrations of chemical bonds in crystals. In quantum technologies, the polarization of photons is considered as a "degree of freedom", which is one of the main parameters that ensure efficient quantum computing. However, even for visible light, polarization control is in most cases separated from light emission. In this paper, we report on a new type of polarization control, implemented directly in a spintronic terahertz emitter. The principle of control, realized by a weak magnetic field at room temperature, is based on a spin-reorientation transition (SRT) in an intermetallic heterostructure TbCo2/FeCo with uniaxial in-plane magnetic anisotropy. SRT is implemented under magnetic field of variable strength but of a fixed direction, orthogonal to the easy magnetization axis. Variation of the magnetic field strength in the angular (canted) phase of the SRT causes magnetization rotation without changing its magnitude. The charge current excited by the spin-to-charge conversion is orthogonal to the magnetization. As a result, THz polarization rotates synchronously with magnetization when magnetic field strength changes. Importantly, the radiation intensity does not change in this case. Control of polarization by SRT is applicable regardless of the spintronic mechanism of the THz emission, provided that the polarization direction is determined by the magnetic moment orientation. The results obtained open the prospect for the development of the SRT approach for THz emission control.
RESUMEN
Intermetallic heterostructures of rare-earth and transition metals exhibit physical properties prospective for various applications. These structures combine giant magnetostriction, controllable magnetic anisotropy, magneto-optical activity and allow spin reorientation transitions (SRT) induced by magnetic field at room temperature. Here, we present the results of a study of spin dynamics induced by ultrafast optical excitation in the [Formula: see text] heterostructure. The time dependence of the light polarization rotation excited by a pump optical pulse with a duration of 35 fs was measured in the total range of the SRT created by external DC magnetic field. We found hysteretic dependence of the polarization rotation on magnetizing field that is specific for spin dynamics near SRT. Enhancement of the rotation is observed in the critical points of the SRT and near the points of magnetization switch from metastable to stable spin states. In the time-domain, two characteristic delays of 20 ps and 200 ps were found, corresponding to the maximum deviation of the light polarization after excitation. The first is explained by the precession motion of spins out of the plane of the structure. The latter is accounted for the spin in-plane deviation from its initial position and thermal relaxation of the anisotropy.
RESUMEN
Acoustic resonators based on antiferromagnetic crystals of "easy plane" type, like α -Fe2O3 or FeBO3, are of interest for applications in magnetoacoustic sensors of electrical and mechanical values because of high sensitivity of their resonance frequency to variations of external magnetic field or mechanical stress. One of the requirements for magnetic control of resonators is a single-value dependence of resonance frequency on magnetic field strength. This requirement is violated when the geometry of resonator allows for crossover of acoustic modes in the range of magnetic field variation. Designing of resonators with frequency control in a wide range requires knowledge of field-dependent acoustic parameters of the crystals and appropriate method for calculation of the resonator eigenfrequencies. In this letter, we present the complete set of acoustic parameters deduced for α -Fe2O3 single crystal that are used for simulation of acoustic mode structures and spectra of vibrations in disk resonator. The results of simulation using COMSOL Multiphysics software are compared with experimental measurements carried out on two resonators of different ratios of sizes that illustrating continuous and discontinuous dependence of the resonance frequency on the magnetic field. Prevention of discontinuity by correction of the resonator geometry is demonstrated.
RESUMEN
The magnetic moment dynamics excited by 35 fs laser pulses in TbCo2/FeCo heterostructure is experimentally investigated by pump-probe technique. The studies are carried out in two typical geometries with magnetizing field perpendicular and along to the easy magnetization axis. In the 'easy axis' orientation, high-frequency oscillations of magnetic moments odd with respect to the sign of the magnetizing field are observed using the magneto-optical Kerr effect. In the perpendicular 'hard axis' orientation corresponding to the spin reorientation phase, the experiment shows oscillations that are even with respect to the field. The maximum angle of Kerr rotation as a function of the magnetizing field strength depicts a specific hysteretic loop that reveals ultrafast optical control of uniaxial magnetic anisotropy originally induced during deposition of the heterostructure in a DC magnetic field. The results provide new ways of ultrafast control of magnetic states in exchange coupled intermetallic heterostructures designed for spintronic applications.
RESUMEN
Nonlinear parametric coupling of gravity-capillary waves (GCW) by ultrasound wave impinging on a liquid surface is studied experimentally. Modulation of the plane wave radiation pressure by dynamically curved surface of the liquid is considered as a mechanism of the coupling. The standing GCW modes are excited near antinodes by ultrasound beam of carrier frequency 1.030â¯MHz and coupled parametrically by a plane ultrasound wave with a frequency 1.035â¯MHz. The beam was modulated at resonance frequencies of GCW overtones f2=5.265 Hz and f4=7.873 Hz while intensity of the plane wave was modulated at frequency fp=2.657 Hz that corresponds to the nonlinear parametric resonance fp=2f2-f4. The amplitudes of the parametric interaction of GCW triads are measured and compared with critical condition for GCWs explosive instability.
RESUMEN
Magnetoplasmonics, combining magnetic and plasmonic functions, has attracted increasing attention owing to its unique magnetic and optical properties in various nano-architectures. In this work, Ag, CoFeB and ITO layers are fabricated on anodic aluminum oxide (AAO) porous films to form hybrid multi-layered nanoporous thin films by magnetron sputtering deposition process. The designed nanostructure supports localized surface plasmon resonance (LSPR) and tunable magneto-optical (MO) activity, namely, the sign inversion, which can be controlled by AAO porous film geometry (pore diameter and inter-pore spacing) flexibly. The physical mechanism of this special MO phenomena is further analyzed and discussed by the correlation of Kerr rotation and electronic oscillations controlled by the surface plasmon resonance that is related to the nanoporous structure.
RESUMEN
Wave phase conjugation of ultrasound scattered by clouds of micro-bubbles in water has been studied experimentally and expounded theoretically. The clouds of microbubbles with variable concentration and sizes have been generated here using electrolytic method. The wave front of the ultrasound beam of frequency 10 MHz was reversed by a parametric phase conjugator. The signal of phase conjugate wave (PCW) detected by an acoustic transceiver was compared with the signal of the wave scattered toward the phase conjugator. The scattered wave (SW) signal was detected by the transducer substituting the phase conjugator. It is shown that, in contrast with stochastic SW signal, wave phase conjugation forms regular PCW signal on the transceiver in spite of random distribution of the scatterers. The PCW signal is found to be much more sensitive to variations of bubbles concentration comparing with the mean value of the SW amplitude. Moreover, the relative error of measurements of PCW signals is much smaller than that of the SW signal. The revealed properties of phase conjugate waves are applicable for testing of concentration of scatterers in dispersive systems.
RESUMEN
Highly efficient tactile display devices must fulfill technical requirements for tactile stimulation, all the while preserving the lightness and compactness needed for handheld operation. This paper focuses on the elaboration of highly integrated magnetic microactuators for tactile display devices. FEM simulation, conception, fabrication, and characterization of these microactuators are presented in this paper. The current demonstrator offers a 4 × 4 flexible microactuator array with a resolution of 2 mm. Each actuator is composed of a Poly (Dimethyl-Siloxane) (PDMS) elastomeric membrane, magnetically actuated by coil-magnet interaction. It represents a proof of concept for fully integrated MEMS tactile devices, with fair actuation forces provided for a power consumption up to 100 mW per microactuator. The prototypes are destined to provide both static and dynamic tactile sensations, with an optimized membrane geometry for actuation frequencies between DC and 350 Hz. On the basis of preliminary experiments, this display device can offer skin stimulations for various tactile stimuli for applications in the fields of Virtual Reality or Human-Computer Interaction (HCI). Moreover, the elastomeric material used in this device and its global compactness offer great advantages in matter of comfort of use and capabilities of integration in haptic devices.
RESUMEN
Supercritical parametric wave phase conjugation (SWPC) is used for selection and phase conjugation of harmonic components of a nonlinear incident wave. Amplitude of the phase conjugate wave in a supercritical mode is high enough for acoustic nonlinearity of propagation medium to appear. As a result, in particular, doubled and quadrupled frequencies of the incident wave become available for image formation at the same order of the medium nonlinearity. The improvement of the imaging system resolution because of harmonic analysis of the received acoustic signal and compensation of phase distortions caused by wave phase conjugation were observed simultaneously when propagation medium was inhomogeneous.
RESUMEN
This paper investigates the saturation mechanism of the nonstationary supercritical mode of parametric wave phase conjugation in a magnetostrictive medium. The numerical simulation considers the two most probable nonlinear mechanisms of interaction between elastic deformation and electromagnetic excitation. For the qualitative study of the dynamics of the system, a one-dimensional numerical simulation is sufficient if applied to an infinite medium with a finite active zone. The temporal form of the conjugate wave is obtained for both hypotheses. Comparison with experiments shows that only one mechanism corresponds to the experimental behavior.
