RESUMEN
The three-dimensional (3D) structure of the ductal epithelium and the surrounding extracellular matrix (ECM) are integral aspects of the breast tissue, and they have important roles during mammary gland development, function and malignancy. However, the architecture of the branched mammary epithelial network is poorly recapitulated in the current in vitro models. 3D bioprinting is an emerging approach to improve tissue-mimicry in cell culture. Here, we developed and optimized a protocol for 3D bioprinting of normal and cancerous mammary epithelial cells into a branched Y-shape to study the role of cell positioning in the regulation of cell proliferation and invasion. Non-cancerous cells formed continuous 3D cell networks with several organotypic features, whereas the ductal carcinoma in situ (DCIS) -like cancer cells exhibited aberrant basal polarization and defective formation of the basement membrane (BM). Quantitative analysis over time demonstrated that both normal and cancerous cells proliferate more at the branch tips compared to the trunk region of the 3D-bioprinted cultures, and particularly at the tip further away from the branch point. The location-specific rate of proliferation was independent of TGFß signaling but invasion of the DCIS-like breast cancer cells was reduced upon the inhibition of TGFß. Thus, our data demonstrate that the 3D-bioprinted cells can sense their position in the branched network of cells and proliferate at the tips, thus recapitulating this feature of mammary epithelial branching morphogenesis. In all, our results demonstrate the capacity of the developed 3D bioprinting method for quantitative analysis of the relationships between tissue structure and cell behavior in breast morphogenesis and cancer.
Asunto(s)
Bioimpresión , Carcinoma Intraductal no Infiltrante , Humanos , Células Epiteliales , Epitelio , Factor de Crecimiento Transformador betaRESUMEN
Plastics are one of the most widely used polymeric materials. However, they are often undegradable and non-recyclable due to the very stable covalent bonds of macromolecules, causing environmental pollution and health problems. Here, we report that liquid-liquid phase separation (LLPS) could drive the formation of robust, stable, and sustainable plastics using small molecules. The LLPS process could sequester and concentrate solutes, strengthen the non-covalent association between molecules and produce a bulk material whose property was highly related to the encapsulated water amounts. It was a robust plastic with a remarkable Young's modulus of 139.5â MPa when the water content was low while became adhesive and could instantly self-heal with more absorbed water. Finally, responsiveness enabled the material to be highly recyclable. This work allowed us to understand the LLPS at the molecular level and demonstrated that LLPS is a promising approach to exploring eco-friendly supramolecular plastics that are potential substitutes for conventional polymers.
Asunto(s)
Plásticos , AguaRESUMEN
Viruses play a major role in modern society and create risks from global pandemics and bioterrorism to challenges in agriculture. Virus infectivity assays and genome copy number determination methods are often used to obtain information on virus preparations used in diagnostics and vaccine development. However, these methods do not provide information on virus particle count. Current methods to measure the number of viral particles are often cumbersome and require highly purified virus preparations and expensive instrumentation. To tackle these problems, we developed a simple and cost-effective time-resolved luminescence-based method for virus particle quantification. This mix-and-measure technique is based on the recognition of the virus particles by an external Eu3+-peptide probe, providing results on virus count in minutes. The method enables the detection of non-enveloped and enveloped viruses, having over tenfold higher detectability for enveloped, dynamic range from 5E6 to 3E10 vp/mL, than non-enveloped viruses. Multiple non-enveloped and enveloped viruses were used to demonstrate the functionality and robustness of the Protein-Probe method.
Asunto(s)
Virosis , Virus , Humanos , Luminiscencia , ViriónRESUMEN
Mesoporous materials are promising catalysts for production of biofuels. Herein, H-MCM-41 catalysts with different concentrations of the silica Bindzil binder (10-50 wt%) were prepared and characterized using pulsed-field gradient (PFG) NMR in the powder form and as extrudates. Effective diffusion coefficients (De) are measured in all cases. Diffusivities of n-hexadecane were found smaller for extrudates as compared to the powder catalysts. The estimates of diffusive tortuosity were also determined. PFG NMR data showed one major component that reveals diffusion in interconnected meso- and micropores and one other minor component (1-2%) that may correspond to more isolated pores or may represent complex effects of restricted diffusion. Therefore, several approaches including initial slope analysis of spin-echo attenuation curves, two-component fitting and Laplace inversion were used to discuss different aspects of diffusional transport in the studied H-MCM-41 materials. Correlations between De and the amount of Bindzil, the specific surface area, the micropore volume, the particle size, the total acid sites and the Lewis acid sites are discussed.
RESUMEN
Glioblastoma (GB) is the most frequent malignant tumor originating from the central nervous system. Despite breakthroughs in treatment modalities for other cancer types, GB remains largely irremediable due to the high degree of intratumoral heterogeneity, infiltrative growth, and intrinsic resistance towards multiple treatments. A sub-population of GB cells, glioblastoma stem cells (GSCs), act as a reservoir of cancer-initiating cells and consequently, constitute a significant challenge for successful therapy. In this study, we discovered that PEI surface-functionalized mesoporous silica nanoparticles (PEI-MSNs), without any anti-cancer drug, very potently kill multiple GSC lines cultured in stem cell conditions. Very importantly, PEI-MSNs did not affect the survival of established GB cells, nor other types of cancer cells cultured in serum-containing medium, even at 25 times higher doses. PEI-MSNs did not induce any signs of apoptosis or autophagy. Instead, as a potential explanation for their lethality under stem cell culture conditions, we demonstrate that the internalized PEI-MSNs accumulated inside lysosomes, subsequently causing a rupture of the lysosomal membranes. We also demonstrate blood-brain-barrier (BBB) permeability of the PEI-MSNs in vitro and in vivo. Taking together the recent indications for the vulnerability of GSCs for lysosomal targeting and the lethality of the PEI-MSNs on GSCs cultured under stem cell culture conditions, the results enforce in vivo testing of the therapeutic impact of PEI-functionalized nanoparticles in faithful preclinical GB models.
RESUMEN
Waste minimization strategy was applied in the current work for synthesis of the catalysts from industrial solid waste, namely desulfurization slag. The starting slag material comprising CaCO3, Ca(OH)2, SiO2, Al2O3, Fe2O3, and TiO2 was processed by various treating agents systematically varying the synthesis parameters. A novel efficient technique - ultrasound irradiation, was applied as an additional synthesis step for intensification of the slag dissolution and crystallization of the new phases. Physico-chemical properties of the starting materials and synthesized catalysts were evaluated by several analytical techniques. Treatment of the industrial slag possessing initially poor crystal morphology and a low surface area (6 m2/g) resulted in formation of highly-crystalline catalysts with well-developed structural properties. Surface area was increased up to 49 m2/g. High basicity of the neat slag as well as materials synthesized on its basis makes possible application of these materials in the reactions requiring basic active sites. Catalytic performance of the synthesized catalysts was elucidated in the synthesis of carbonate esters by carboxymethylation of cinnamyl alcohol with dimethyl carbonate carried out at 150 °C in a batch mode. Ultrasonication of the slag had a positive effect on the catalytic activity. Synthesized catalysts while exhibiting similar selectivity to the desired product (ca. 84%), demonstrated a trend of activity increase for materials prepared using ultrasonication pretreatment. The choice of the treating agent also played an important role in the catalytic performance. The highest selectivity to the desired cinnamyl methyl carbonate (88%) together with the highest activity (TOF35 = 3.89*10-7 (mol/g*s)) was achieved over the material synthesized using 0.6 M NaOH solution as the treating agent with the ultrasound pre-treatment at 80 W for 4 h.
RESUMEN
Molecular self-assembly has been widely used to develop nanocarriers for drug delivery. However, most of them have unsatisfactory drug loading capacity (DLC) and the dilemma between stimuli-responsiveness and stability, stagnating their translational process. Herein, we overcame these drawbacks using dynamic combinatorial chemistry. A carrier molecule was spontaneously and quantitatively synthesized, aided by co-self-assembly with a template molecule and an anti-cancer drug doxorubicin (DOX) from a dynamic combinatorial library that was operated by disulfide exchange under thermodynamic control. The highly selective synthesis guaranteed a stable yet pH- and redox- responsive nanocarrier with a maximized DLC of 40.1 % and an enhanced drug potency to fight DOX resistance in vitro and in vivo. Our findings suggested that harnessing the interplay between synthesis and self-assembly in complex chemical systems could yield functional nanomaterials for advanced applications.
Asunto(s)
Antineoplásicos/química , Doxorrubicina/química , Portadores de Fármacos/química , Nanotubos/química , Animales , Antineoplásicos/farmacología , Antineoplásicos/uso terapéutico , Línea Celular Tumoral , Proliferación Celular/efectos de los fármacos , Doxorrubicina/farmacología , Doxorrubicina/uso terapéutico , Resistencia a Antineoplásicos/efectos de los fármacos , Humanos , Concentración de Iones de Hidrógeno , Ratones , Ratones Desnudos , Neoplasias/tratamiento farmacológico , Neoplasias/patología , Oxidación-Reducción , Trasplante HeterólogoRESUMEN
Correlative light and electron microscopy (CLEM) is revolutionizing how cell samples are studied. CLEM provides a combination of the molecular and ultrastructural information about a cell. For the execution of CLEM experiments, multimodal fiducial landmarks are applied to precisely overlay light and electron microscopy images. Currently applied fiducials such as quantum dots and organic dye-labeled nanoparticles can be irreversibly quenched by electron beam exposure during electron microscopy. Generally, the sample is therefore investigated with a light microscope first and later with an electron microscope. A versatile fiducial landmark should offer to switch back from electron microscopy to light microscopy while preserving its fluorescent properties. Here, we evaluated green fluorescent and electron dense nanodiamonds for the execution of CLEM experiments and precisely correlated light microscopy and electron microscopy images. We demonstrated that green color emitting fluorescent nanodiamonds withstand electron beam exposure, harsh chemical treatments, heavy metal straining, and, importantly, their fluorescent properties remained intact for light microscopy.
Asunto(s)
Colorantes/química , Electrones , Microscopía Electrónica , Nanodiamantes/química , Análisis de la Célula Individual/métodos , Línea Celular Tumoral , Humanos , Procesamiento de Imagen Asistido por Computador , Microscopía Electrónica/métodos , Microscopía FluorescenteRESUMEN
Three-dimensional correlative light and electron microscopy (3D CLEM) is attaining popularity as a potential technique to explore the functional aspects of a cell together with high-resolution ultrastructural details across the cell volume. To perform such a 3D CLEM experiment, there is an imperative requirement for multi-modal probes that are both fluorescent and electron-dense. These multi-modal probes will serve as landmarks in matching up the large full cell volume datasets acquired by different imaging modalities. Fluorescent nanodiamonds (FNDs) are a unique nanosized, fluorescent, and electron-dense material from the nanocarbon family. We hereby propose a novel and straightforward method for executing 3D CLEM using FNDs as multi-modal landmarks. We demonstrate that FND is biocompatible and is easily identified both in living cell fluorescence imaging and in serial block-face scanning electron microscopy (SB-EM). We illustrate the method by registering multi-modal datasets.
RESUMEN
Endothelial cells contain several nanoscale domains such as caveolae, fenestrations and transendothelial channels, which regulate signaling and transendothelial permeability. These structures can be covered by filter-like diaphragms. A transmembrane PLVAP (plasmalemma vesicle associated protein) protein has been shown to be necessary for the formation of diaphragms. The expression, subcellular localization and fenestra-forming role of PLVAP in liver sinusoidal endothelial cells (LSEC) have remained controversial. Here we show that fenestrations in LSEC contain PLVAP-diaphragms during the fetal angiogenesis, but they lose the diaphragms at birth. Although it is thought that PLVAP only localizes to diaphragms, we found luminal localization of PLVAP in adult LSEC using several imaging techniques. Plvap-deficient mice revealed that the absence of PLVAP and diaphragms did not affect the morphology, the number of fenestrations or the overall vascular architecture in the liver sinusoids. Nevertheless, PLVAP in fetal LSEC (fenestrations with diaphragms) associated with LYVE-1 (lymphatic vessel endothelial hyaluronan receptor 1), neuropilin-1 and VEGFR2 (vascular endothelial growth factor receptor 2), whereas in the adult LSEC (fenestrations without diaphragms) these complexes disappeared. Collectively, our data show that PLVAP can be expressed on endothelial cells without diaphragms, contradict the prevailing concept that biogenesis of fenestrae would be PLVAP-dependent, and reveal previously unknown PLVAP-dependent molecular complexes in LSEC during angiogenesis.
Asunto(s)
Diafragma/metabolismo , Endotelio/metabolismo , Hígado/metabolismo , Proteínas de la Membrana/genética , Animales , Capilares/crecimiento & desarrollo , Capilares/metabolismo , Capilares/ultraestructura , Caveolas/metabolismo , Caveolas/ultraestructura , Diafragma/crecimiento & desarrollo , Diafragma/ultraestructura , Células Endoteliales/metabolismo , Células Endoteliales/ultraestructura , Endotelio/crecimiento & desarrollo , Endotelio/ultraestructura , Regulación del Desarrollo de la Expresión Génica/genética , Humanos , Hígado/ultraestructura , Proteínas de la Membrana/metabolismo , Ratones , Transducción de Señal/genéticaRESUMEN
Hydrodeoxygenation (HDO) of isoeugenol (IE) was investigated using bimetallic iridium-rhenium and platinum-rhenium catalysts supported on alumina in the temperature and pressure ranges of 200-250 °C and 17-40 bar in nonpolar dodecane as a solvent. The main parameters were catalyst type, hydrogen pressure, and initial concentration. Nearly quantitative yield of the desired product, propylcyclohexane (PCH), at complete conversion in 240 min was obtained with Ir-Re/Al2O3 prepared by the deposition-precipitation method using 0.1 mol/L IE initial concentration. High iridium dispersion together with a modification effect of rhenium provided in situ formation of the IrRe active component with reproducible catalytic activity for selective HDO of IE to PCH. The reaction rate was shown to increase with the increasing initial IE concentration promoting also HDO and giving a higher liquid phase mass balance. Increasing hydrogen pressure benefits the PCH yield.
RESUMEN
Development of fluorescent and electron dense markers is essential for the implementation of correlative light and electron microscopy, as dual-contrast landmarks are required to match the details in the multimodal images. Here, a novel method for correlative microscopy that utilizes fluorescent nanodiamonds (FNDs) as dual-contrast probes is reported. It is demonstrated how the FNDs can be used as dual-contrast labels-and together with automatic image registration tool SuperTomo, for precise image correlation-in high-resolution stimulated emission depletion (STED)/confocal and transmission electron microscopy (TEM) correlative microscopy experiments. It is shown how FNDs can be employed in experiments with both live and fixed cells as well as simple test samples. The fluorescence imaging can be performed either before TEM imaging or after, as the robust FNDs survive the TEM sample preparation and can be imaged with STED and other fluorescence microscopes directly on the TEM grids.
RESUMEN
Correlative light and electron microscopy (CLEM) allows combining the advantages of fluorescence microscopy and electron microscopy for cell imaging. Rare phenomenon expressing cells can be studied by specifically tagged fluorophores with fluorescence microscopy. Subsequently, cells can be fixed and ultra-structural details can be studied with transmission electron microscopy (TEM) at a higher resolution. However, precise landmarks are necessary to track the same cell throughout the CLEM process. In this technical report, we present a high contrast inkjet-printed gold nanoparticle patterns over commercial glass coverslip to facilitate cell tracking with correlative microscopy. High contrast and strong reflection from nano gold pattern can be used as a fixed landmark for cell identification with fluorescence microscopy. Nano gold printed letters over coverslips are visible in resin blocks, which can be further used to identify the cell of interest for performing sectioning of embedded cell blocks for TEM.
RESUMEN
Biofilm formation and dipeptidyl peptidase IV (DPPIV) enzyme activity contribute to the virulence of oral bacteria, and these virulence factors are partly regulated by quorum sensing signaling system. We recently demonstrated that estradiol regulates growth properties and DPPIV activity of Prevotella intermedia, Prevotella nigrescens, and Prevotella pallens. Here, we examined the DPPIV dependency of biofilm formation of Prevotella aurantiaca. Three strains (two clinical strains AHN 37505 and 37552 and the type strain CCUG 57723) were incubated in three estradiol concentrations (30, 90, and 120 nmol/L). Regulation of DPPIV activity, biofilm and fimbria formation, and coaggregation of bacterial strains were analyzed after incubation with four concentrations (10 nM, 100 nM, 1 µM, 10 µM) of dihydroxy-2,3-pentaedione (DPD), the universal precursor of autoinducer -2 (AI-2), and analogs (ethyl-DPD, butyl-DPD, and isobutyl-DPD) for 24 h. Estradiol enhanced the planktonic growth, coaggregation, and biofilm formation of P. aurantiaca strains. The whole cell extract of AHN 37505 had the highest DPPIV activity, followed by CCUG 57723 and AHN 37552. Inhibition of DPPIV activity with di-isopropylfluorophosphate suppressed the effect of estradiol on biofilm formation. At 100 nM and 10 µM concentrations of DPD, butyl DPD, and isobutyl DPD, biofilm formation of P. aurantiaca was significantly inhibited. Fimbriae formation was enhanced up to concentrations of 100 nM and 1 µM followed by a significant inhibition at higher concentrations of DPD and all analogs. A slight but significant inhibitory effect of DPD and analogs on DPPIV activity was observed. Our results indicate that DPPIV plays a key role in the estradiol-regulated biofilm formation of P. aurantiaca. Quorum sensing autoinducer DPD and C1-alkyl analogs could inhibit biofilm-related virulence of P. aurantiaca.
Asunto(s)
Infecciones por Bacteroidaceae/microbiología , Biopelículas/crecimiento & desarrollo , Dipeptidil Peptidasa 4/metabolismo , Prevotella/fisiología , Percepción de Quorum , Transducción de Señal , Biopelículas/efectos de los fármacos , Activación Enzimática , Estradiol/farmacología , Humanos , Viabilidad Microbiana/efectos de los fármacos , Prevotella/patogenicidad , Prevotella/ultraestructura , Virulencia , Factores de VirulenciaRESUMEN
As a proof of concept, here it is established that curcumin integrated chitosan oligosaccharide lactate (COL) self-assembles on silica nanoparticle surface to form nano hybrid particles (NHPs). These NHPs have size in the ranges of 25-35nm with silica nanoparticle as its core and curcumin-COL as outer layer having thickness of 4-8nm. The fluorescence intensity of these NHPs are found to be quenched and emission maximum is ~50nm red shifted compared to free curcumin implying inner filter effect and/or homo-FRET between curcumin molecules present on the surface of individual nano hybrid particle. Although fluorescence of free curcumin is remarkably quenched by Hg2+/Cu2+ ions due to chelation through keto-enol form, the fluorescence of NHPs is unaffected by Hg2+/Cu2+ ion that boosts analytical selectivity. The fluorescence intensity is outstandingly enhanced in the presence of cholesterol but is not influenced by ascorbic acid, uric acid, glucose, albumin, lipid and other potential interfering substances that either obstruct during enzymatic reaction or affect fluorescence of free curcumin. Thus, NHPs outstandingly improve analytical specificity, selectivity and sensitivity during cholesterol estimation compared to free curcumin. The interaction between cholesterol and NHPs is found to be a combination of ground state electrostatic interaction through the free hydroxyl group of cholesterol along with hydrophobic interaction between NHPs and cholesterol and excited state interaction. The proposed cholesterol biosensor illustrates a wider linear dynamic range, 0.002-10mmolL-1, (upper limit is due to lack of solubility of cholesterol) needed for biomedical application and better than reported values during enzymatic reaction. In addition, the NHPs are found to be photo-stable potentially making it suitable for simple, quick and cost-effective cholesterol estimation and opening an alternative approach other than enzymatic reaction using nano hybrid structure to tune analytical specificity, selectivity and sensitivity of probe molecule.
Asunto(s)
Técnicas Biosensibles/métodos , Colesterol/análisis , Curcumina/química , Nanopartículas/química , Polielectrolitos/química , Dióxido de Silicio/química , Antineoplásicos/química , Humanos , Interacciones Hidrofóbicas e HidrofílicasRESUMEN
In this paper, cellular management of fluorescent nanodiamonds (FNDs) has been studied for better understanding in the design for potential applications of FNDs in biomedicine. The FNDs have shown to be photostable probes for bioimaging and thus are well-suited, for example, long-term tracking purposes. The FNDs also exhibit good biocompatibility and, in general, low toxicity for cell labeling. To demonstrate the underlying mechanism of cells coping the low but potentially toxic effects by nondegradable FNDs, we have studied their temporal intracellular trafficking. The FNDs were observed to be localized as distinct populations inside cells in early endosomes, lysosomes, and in proximity to the plasma membrane. The localization of FNDs in early endosomes suggests the internalization of FNDs, and lysosomal localization, in turn, can be interpreted as a prestate for exocytosis via lysosomal degradation pathway. The endocytosis and exocytosis appear to be occurring simultaneously in our observations. The mechanism of continuous endocytosis and exocytosis of FNDs could be necessary for cells to maintain normal proliferation. Furthermore, 120 h cell growth assay was performed to verify the long-term biocompatibility of FNDs for cellular studies.
RESUMEN
Zinc oxide (ZnO) nanorods were manufactured using the aqueous chemical growth (ACG) method, and the effect of thermal acetylene treatment on their morphology, chemical composition, and optical properties was investigated. Changes in the elemental content of the treated rods were found to be different than in previous reports, possibly due to the different defect concentrations in the samples, highlighting the importance of synthesis method selection for the process. Acetylene treatment resulted in a significant improvement of the ultraviolet photoluminescence of the rods. The greatest increase in emission intensity was recorded on ZnO rods treated at the temperature of 825 °C. The findings imply that the changes brought on by the treatment are limited to the surface of the ZnO rods.
RESUMEN
The oral bioavailability of a poorly water-soluble drug is often inadequate for the desired therapeutic effect. The bioavailability can be improved by enhancing the physicochemical properties of the drug (e.g., dissolution rate, permeation across the gastrointestinal tract). Other approach include shielding the drug from the gastric metabolism and targeted drug release to obtain optimal drug absorption. In this study, a poorly water-soluble model drug, griseofulvin, was encapsulated as disordered solid dispersions into Eudragit L 100-55 enteric polymer micromatrix particles, which were produced by electrospraying. Similar micromatrix particles were also produced with griseofulvin-loaded thermally oxidized mesoporous silicon (TOPSi) nanoparticles dispersed to the polymer micromatrices. The in vitro drug dissolution at pH 1.2 and 6.8, and permeation at pH 7.4 across Caco-2/HT29 cell monolayers from the micromatrix particles, were investigated. The micromatrix particles were found to be gastro-resistant, while at pH 6.8 the griseofulvin was released very rapidly in a fast-dissolving form. Compared to free griseofulvin, the permeability of encapsulated griseofulvin across the intestinal cell monolayers was greatly improved, particularly for the TOPSi-doped micromatrix particles. The griseofulvin solid dispersions were stable during storage for 6 months at accelerated conditions. Overall, the method developed here could prove to be a useful oral drug delivery solution for improving the bioavailability of poorly water-soluble or otherwise problematic drugs.