RESUMEN
A key feature in the understanding of the mechanisms of integration versus rejection of implanted materials is a deepened understanding of the elemental and molecular compositions of the interface zone between the surface of the synthetic man-made material and the biological components of tissue. Intact interfaces between metallic implants and tissues have not been able to image and analyse on the ultrastructural level with the common transmission electron microscopy (TEM) sample preparation techniques. By using focused ion beam microscopy for site-specific preparation of TEM samples, intact interfaces between metal implants and calcified tissue were imaged for the first time. The interface's elemental and crystallographic compositions were determined using energy dispersive X-ray mapping and electron diffraction. The developed technique fulfills a long-sought-for demand to correlate the surface properties of implanted metal prostheses with the fine structure and composition of preserved interfaces with tissues.
Asunto(s)
Tornillos Óseos , Materiales Biocompatibles Revestidos , Microscopía Electrónica de Transmisión/instrumentación , Animales , Femenino , Microscopía Electrónica de Transmisión/métodos , ConejosRESUMEN
Chemically bonded ceramics have several advantages compared with conventional ceramics to be used as biomaterials. Especially the possibilities to harden the material at room temperature and to control the rheology are very beneficial. This paper investigates the interface formed in vivo between a calcium aluminate based dental filling material and teeth. Class 1 occlusal fillings were made in wisdom teeth and extracted after up to four weeks. Polished cross-sections of the teeth were studied with scanning electron microscopy (SEM), focused ion beam microscopy (FIB) and transmission electron microscopy (TEM). In order to analyse the distribution of elements at the interface elemental mapping was performed using STEM and EDX. The results showed that a tight bond forms between the filling material and tooth and no gap could be found even at high magnification. A 100-200 nm wide zone with an increase in oxygen was detected in the enamel next to the filling. The zone was denser than the rest of the enamel. Elemental mapping indicated an increase of silicon and a decrease of Ca at the interface. Dark field imaging and EDX mapping showed that the calcium aluminate system formed apatite in situ during hardening through precipitation.
Asunto(s)
Compuestos de Aluminio/química , Compuestos de Calcio/química , Cerámica/química , Implantes Dentales , Materiales Dentales/química , Restauración Dental Permanente , Tercer Molar/cirugía , Tercer Molar/ultraestructura , Apatitas/metabolismo , Dureza , Humanos , Técnicas In Vitro , Ensayo de Materiales , Tercer Molar/metabolismoRESUMEN
All techniques employed in the preparation of samples for transmission electron microscopy (TEM) introduce or include artifacts that can degrade the images of the materials being studied. One significant cause of this image degradation is surface amorphization. The damaged top and bottom surface layers of TEM samples can obscure subtle detail, particularly at high magnification. Of the techniques typically used for TEM sample preparation of semiconducting materials, cleaving produces samples with the least surface amorphization, followed by low-angle ion milling, conventional ion milling, and focused ion beam (FIB) preparation. In this work, we present direct measurements of surface damage on silicon produced during TEM sample preparation utilizing these techniques. The thinnest damaged layer formed on a silicon surface was measured as 1.5 nm thick, while an optimized FIB sample preparation process results in the formation of a 22 nm thick damaged layer. Lattice images are obtainable from all samples.
RESUMEN
Techniques are described for the extraction onto carbon replicas of precipitates and inclusions from Mg and Al-based alloys for analytical transmission electron microscopy. EDX analysis of Mn precipitates from a Mg-Mn alloy illustrates the problems that can arise from spurious X-rays, caused by the use of a 3mm disc specimen.