Combining a ligand photogenerator and a Ru precatalyst: a photoinduced approach to cross-linked ROMP polymer films.

Although metathesis photoinduced catalysis is now well established, there is little development in thin film preparation using photochemically activated ring-opening metathesis polymerization (ROMP). Herein, a N-heterocyclic carbene (NHC) photogenerator (1,3-bis(mesityl)imidazolium tetraphenylborate) is combined with an inactive metathesis catalyst ([RuCl2(p-cymene)]2) to generate under UV irradiation an active catalyst (p-cymene)RuCl2 (NHC), that is capable of producing in a single step cross-linked copolymer films by ROMP of norbornene with dicyclopentadiene. The study shows that the photoinitiated catalytic system can be optimized by increasing the yield of photogenerated NHC through a sensitizer (2-isopropylthioxanthone), and by choosing [RuI2(p-cymene)]2 as precatalyst to provide a long-term photolatency. The cross-linked polymer structure is investigated by a range of techniques including gel content measurement, FT-IR and solid-state 13C NMR spectroscopy, TGA and DSC, which reveal a cross-linking mechanism proceeding through both metathesis and olefin coupling.

Photogeneration of N-Heterocyclic Carbenes: Application in Photoinduced Ring-Opening Metathesis Polymerization.

We report a method to generate the N-heterocyclic carbene (NHC) 1,3-dimesitylimidazol-2-ylidene (IMes) under UV-irradiation at 365 nm to characterize IMes and determine the corresponding photochemical mechanism. Then, we describe a protocol to perform ring-opening metathesis polymerization (ROMP) in solution and in miniemulsion using this NHC-photogenerating system. To photogenerate IMes, a system comprising 2-isopropylthioxanthone (ITX) as the sensitizer and 1,3-dimesitylimidazolium tetraphenylborate (IMesH+BPh4-) as the protected form of NHC is employed. IMesH+BPh4- can be obtained in a single step by anion exchange between 1,3-dimesitylimidazolium chloride and sodium tetraphenylborate. A real-time steady-state photolysis setup is described, which hints that the photochemical reaction proceeds in two consecutive steps: 1) ITX triplet is photo-reduced by the borate anion and 2) subsequent proton transfer takes place from the imidazolium cation to produce the expected NHC IMes. Two separate characterization protocols are implemented. Firstly, CS2 is added to the reaction media to evidence the photogeneration of NHC through formation of the IMes-CS2 adduct. Secondly, the amount of NHC released in situ is quantified using acid-base titration. The use of this NHC photo-generating system for the ROMP of norbornene is also discussed. In solution, a photopolymerization experiment is conducted by mixing ITX, IMesH+BPh4-, [RuCl2(p-cymene)]2 and norbornene in CH2Cl2, then irradiating the solution in a UV reactor. In a dispersed medium, a monomer miniemulsion is first formed then irradiated inside an annular reactor to produce a stable poly(norbornene) latex.

In Situ Generated Ruthenium-Arene Catalyst for Photoactivated Ring-Opening Metathesis Polymerization through Photolatent N-Heterocyclic Carbene Ligand.

1,3-Bis(mesityl)imidazolium tetraphenylborate (IMesH+ BPh4- ) can be synthesized in one step by anion metathesis between the corresponding imidazolium chloride and sodium tetraphenylborate. In the presence of 2-isopropylthioxanthone (sensitizer), an IMes N-heterocyclic carbene (NHC) ligand can be photogenerated under irradiation at 365 nm through coupled electron/proton transfer reactions. By combining this tandem NHC photogenerator system with metathesis inactive [RuCl2 (p-cymene)]2 precatalyst, the highly active RuCl2 (p-cymene)(IMes) complex can be formed in situ, enabling a complete ring-opening metathesis polymerization (ROMP) of norbornene in the matter of minutes at room temperature. To the best of our knowledge, this is the first example of a photogenerated NHC. Its exploitation in photoROMP has resulted in a simplified process compared to current photocatalysts, because only stable commercial or easily synthesized reagents are required.

Histone Deacetylase Inhibitors Delivery using Nanoparticles with Intrinsic Passive Tumor Targeting Properties for Tumor Therapy.

Fast clearance, metabolism and systemic toxicity are major limits for the clinical use of anti-cancer drugs. Histone deacetylase inhibitors (HDACi) present these defects despite displaying promising anti-tumor properties on tumor cells in vitro and in in vivo model of cancers. Specific delivery of anti-cancer drugs into the tumor should improve their clinical benefit by limiting systemic toxicity and by increasing the anti-tumor effect. In this work, we describe a simple and flexible polymeric nanoparticle platform highly targeting the tumor in vivo and triggering impressive tumor weight reduction when functionalized with HDACi. Our nanoparticles were produced by Ring-Opening Metathesis Polymerization of azido-polyethylene oxide-norbornene macromonomers and functionalized using click chemistry. Using an orthotopic model of peritoneal invasive cancer, a highly selective accumulation of the particles in the tumor was obtained. A combination of epigenetic drugs involving a pH-responsive histone deacetylase inhibitor (HDACi) polymer conjugated to these particles gave 80% reduction of tumor weight without toxicity whereas the free HDACi has no effect. Our work demonstrates that the use of a nanovector with theranostic properties leads to an optimized delivery of potent HDACi in tumor and then, to an improvement of their anti-tumor properties in vivo.

Vancomycin Functionalized Nanoparticles for Bactericidal Biomaterial Surfaces.

In this paper, we describe a simple and powerful way to synthesize antibacterial biomaterials with applications as implants in orthopedic surgery. Such implants are obtained by covalently grafting onto the Ti90A16 V4 alloy surface with vancomycin-functionalized nanoparticles. Nanoparticles were produced by ring-opening metathesis polymerization of α-norbornenyl-ω-vancomycin poly(ethylene oxide) macromonomers. Vancomycin is an interesting candidate because of its use in the field of implant associated infection as it is a glycopeptide which acts on bacterial walls. As a consequence, vancomycin does not need to be released for it to be active. In the first part of this paper, the synthesis and the complete characterization of these materials are described. In a second part, the in vitro antibacterial behavior is analyzed and discussed.

Histone deacetylase inhibitor-polymer conjugate nanoparticles for acid-responsive drug delivery.

We report the synthesis of acid-responsive polymeric nanoparticles (NPs) consisting of a polymer-histone deacetylase inhibitor conjugate. An innovative aspect of this drug delivery particle lies in the NP conjugation of a histone deacetylase (HDAC) inhibitor, CI-994 (Tacedinaline), introduced with a clickable acid-responsive prodrug during monomer synthesis, prior to polymerization. Another novelty lies in the selected norbornene (NB)-polyethylene oxide (PEO) macromonomer allowing standardization of the polymerization process by Ring-Opening Metathesis Polymerization (ROMP) and functionalization through azide-alkyne click chemistry. Herein we demonstrate that the synthesized polymer gave 300 nm core-shell spherical nanoparticles with low dispersity (0.04), high water dispersability thanks to the PEO shell and well controlled HDAC inhibitor prodrug loading. Bioluminescence Resonance Energy Transfer (BRET) assay in living cells and viability experiments demonstrated efficient cellular internalization without additional chemistry, drug release inside cells with restoration of the HDAC inhibition and induction of apoptosis. Such NPs should minimize drug release in vivo during blood circulation and trigger intracellular delivery after endocytosis, holding promises for improved efficacy of this class of epigenetic inhibitors. This standardized synthesis paves the way for multifunctional nanoparticles synthesis.

Vorinostat-polymer conjugate nanoparticles for Acid-responsive delivery and passive tumor targeting.

In vivo histone deacetylase (HDAC) inhibition by vorinostat under clinically acceptable dosing is limited by its poor pharmacokinetics properties. A new type of nontoxic pH-responsive delivery system has been synthesized by ring-opening metathesis polymerization, allowing for the selective distribution of vorinostat in mesothelioma tumors in vivo and subsequent histone reacetylation. The delivery system is synthesized by generic click chemistry, possesses native stealth properties for passive tumor targeting, and does not need additional chemistry for cellular internalization. Although vorinostat alone at 50 mg/kg in mice showed no effect, our new delivery system with 2 mg/kg vorinostat promoted histone reacetylation in tumors without side effects, demonstrating that our strategy improves the activity of this HDAC inihibitor in vivo.

pH-controlled delivery of gentamicin sulfate from orthopedic devices preventing nosocomial infections.

Since the beginning of the 1970s, controlled release technology has witnessed great advancement, and motivated numerous researchers in materials science. These systems overcome the drawbacks of traditional drug dosage form, and offer more effective and favorable methods to optimize drug delivery in optimum dose to specific sites or to prolong delivery duration. This paper deals with the synthesis of pH-controlled drug delivery systems for bone implant, allowing the local release of gentamicin sulfate (GS), an antibiotic commonly used to prevent infections during orthopedic surgeries. We present a biomaterial synthesis allowing the controlled release of GS at the site of surgical implantation (over an adjustable period of time). In our design, spherical nanoparticles (NPs) functionalized by the chosen antibiotic (Gentamicin sulfate, GS), are chemically anchored to the biomaterial surface. A cleavage reaction of the chemical bond between NPs and GS, effected by the contact of material with a solution presenting an acidic pH (in the case of infection, there is a decrease of the physiological medium pH), induces controlled release of the bioactive molecule in its native form. In this paper, we discuss the synthesis of a bioactive titanium based biomaterial in general, and the grafting of the NPs onto the titanium surfaces in particular. We have paid particular attention to the characterization of the drug surface density and the release kinetic of the active molecule as a function of the pH. In vitro bacterial growth inhibition tests after GS delivery at acidic pH (with Staphylococcus aureus) have also been carried out in order to prove the efficiency of such biomaterials.

Impact of RGD nanopatterns grafted onto titanium on osteoblastic cell adhesion.

This work reports on the synthesis of titanium bone implants functionalized with nanoparticles (NPs) containing Arg-Gly-Asp-Cys peptide (RGDC) and shows the adhesion behavior of cells seeded on these materials. RGDC peptides were first conjugated to a norbornenyl-poly(ethylene oxide) macromonomer (Nb-PEO). Then, functional NPs with a size of ∼300 nm and constituted of polynorbornene core surrounded by poly(ethylene oxide) shell were prepared by ring-opening metathesis polymerization in dispersed medium. The grafting density of these NPs on the titanium surface is up to 2 NPs·µm(-2) (80 pmol of RGDC per cm(-2) of NP surface). Cell adhesion was evaluated using preosteoblast cells (MC3T3-E1). Results of cells cultured for 24 h showed that materials grafted with NPs functionalized with RGDC peptides enhance specific cell adhesion and can create filopodia-like structures among NP sites by stressing the cells.

Reactivity of vinyl ethers and vinyl ribosides in UV-initiated free radical copolymerization with acceptor monomers.

The reactivity of various vinyl ethers and vinyloxy derivatives of ribose in the presence of diethyl fumarate or diethyl maleate was investigated for evaluating the potential of donor-acceptor-type copolymerization applied to unsaturated monomers derived from renewable feedstock. The photochemically induced polymerization of model monomer blends in the bulk state was monitored by infrared spectroscopy. The method allowed us to examine the influence of monomer pair structure on the kinetic profiles. The simultaneous consumption of both monomers was observed, supporting an alternating copolymerization mechanism. A lower reactivity of the blends containing maleates compared with fumarates was confirmed. The obtained kinetic data revealed a general correlation between the initial polymerization rate and the Hansen parameter δ(H) associated with the H-bonding aptitude of the donor monomer.

Compared reactivity of allyl ribosides in UV-initiated free radical copolymerization with acceptor monomers.

The free radical copolymerization of allyl ribosides with diethyl fumarate and maleate was investigated for evaluating the potential of donor-acceptor type copolymerization applied to unsaturated monomers derived from renewable feedstock. The photochemically induced polymerization of model monomer blends was conducted in solution as well as in liquid films of bulk reactants. Infrared spectroscopy was used to monitor the consumption of the allylic donor monomer and of the butenedicarboxylate acceptor monomers. The method allowed examining the influence of the nature of the monomer pair and of their relative concentration on the kinetic profiles. Comparison with reference vinyl ether monomers confirmed the expected lower reactivity of the blends containing allylic derivatives. SEC and NMR analysis supported the occurrence of degradative chain transfer during the reactions involving allylic monomers. However, allyl derivatives of glycerol as well as O-allyl ribosides were shown to undergo polymerization with high conversion of both monomers when blended in appropriate molar ratios.