Direct Drug Analysis in Polymeric Implants Using Desorption Electrospray Ionization - Mass Spectrometry Imaging (DESI-MSI).

PURPOSE: Desorption electrospray ionization mass spectrometry imaging (DESI-MSI) coupled with gas-phase ion mobility spectrometry was used to characterize the drug distribution in polymeric implants before and after exposure to accelerated in vitro release (IVR) media. DESI-MSI provides definitive chemical identification and localization of formulation components, including 2D chemical mapping of individual components with essentially no sample preparation. METHODS: Polymeric implants containing 40% (w/w) entecavir and poly(D,L-lactide) (PLA) were prepared and then exposed to either acidified PBS (pH 2.5) or MeOH:H2O (50:50, v/v) medias during a 7-day IVR test using continuous flow-through (CFT) cell dissolution. The amount of drug released from the polymer matrix during the 7-day IVR test was monitored by online-ultraviolet spectroscopy (UV) and HPLC-UV. After that period, intact implants and radial sections of implants were analyzed by DESI-MSI with ion mobility spectrometry. The active ingredient along with impurities and contaminants were used to generate chemical maps before and after exposure to the release medias. RESULTS: Bi-phasic release profiles were observed for implants during IVR release using both medias. During the second phase of release, implants exposed to PBS, pH 2.5, released the entecavir faster than the implants exposed to MeOH:H2O (50:50, v/v). Radial images of the polymer interior show that entecavir is localized along the central core of the implant after exposure to MeOH:H2O (50:50, v/v) and that the drug is more uniformly distributed throughout the implant after exposure to acidified PBS (pH 2.5). CONCLUSIONS: DESI-MSI coupled with ion mobility analysis produced chemical images of the drug distribution on the exterior and interior of cylindrical polymeric implants before and after exposure to various release medias. These results demonstrated the utility of this technique for rapid characterization of drug and impurity/degradant distribution within polymeric implants with direct implications for formulation development as well as analytical method development activities for various solid parenteral and oral dosage forms. These results are especially meaningful since samples were analyzed with essentially no preparative procedures.

Multiple Pathways in Capsid Assembly.

For a three-dimensional structure to spontaneously self-assemble from many identical components, the steps on the pathway must be kinetically accessible. Many virus capsids are icosahedral and assembled from hundreds of identical proteins, but how they navigate the assembly process is poorly understood. Capsid assembly is thought to involve stepwise addition of subunits to a growing capsid fragment. Coarse-grained models suggest that the reaction occurs on a downhill energy landscape, so intermediates are expected to be fleeting. In this work, charge detection mass spectrometry (CDMS) has been used to track assembly of the hepatitis B virus (HBV) capsid in real time. The icosahedral T = 4 capsid of HBV is assembled from 120 capsid protein dimers. Our results indicate that there are multiple pathways for assembly. Under conditions that favor a modest association energy there is no accumulation of large intermediates, which indicates that available pathways include ones on a downhill energy surface. Under higher salt conditions, where subunit interactions are strengthened, around half of the products of the initial assembly reaction have masses close to the T = 4 capsid and the other half are stalled intermediates which emerge abruptly at around 90 dimers, indicating a bifurcation in the ensemble of assembly paths. When incubated at room temperature, the 90-dimer intermediates accumulate dimers and gradually shift to higher mass and merge with the capsid peak. Though free subunits are present in solution, the stalled intermediates indicate the presence of a local minima on the energy landscape. Some intermediates may result from hole closure, where the growing capsid distorts to close the hole due to the missing capsid proteins or from a species where subsequent additions are particularly labile.

Hepatitis B Virus Capsid Completion Occurs through Error Correction.

Understanding capsid assembly is important because of its role in virus lifecycles and in applications to drug discovery and nanomaterial development. Many virus capsids are icosahedral, and assembly is thought to occur by the sequential addition of capsid protein subunits to a nucleus, with the final step completing the icosahedron. Almost nothing is known about the final (completion) step because the techniques usually used to study capsid assembly lack the resolution. In this work, charge detection mass spectrometry (CDMS) has been used to track the assembly of the T = 4 hepatitis B virus (HBV) capsid in real time. The initial assembly reaction occurs rapidly, on the time scale expected from low resolution measurements. However, CDMS shows that many of the particles generated in this process are defective and overgrown, containing more than the 120 capsid protein dimers needed to form a perfect T = 4 icosahedron. The defective and overgrown capsids self-correct over time to the mass expected for a perfect T = 4 capsid. Thus, completion is a distinct phase in the assembly reaction. Capsid completion does not necessarily occur by inserting the last building block into an incomplete, but otherwise perfect icosahedron. The initial assembly reaction can be predominently imperfect, and completion involves the slow correction of the accumulated errors.

Charge detection mass spectrometry: weighing heavier things.

Charge detection mass spectrometry (CDMS) is a single molecule method where the mass of each ion is directly determined from individual measurements of its mass-to-charge ratio and charge. CDMS is particularly valuable for the analysis of high mass and heterogeneous analytes, where conventional MS methods are often confounded. In the last few years, CDMS has received a renaissance. Technical developments have improved the resolution and dramatically increased the breadth of problems that can be addressed. These improvements have moved CDMS more into the mainstream as interest in the application of mass spectrometry to high molecular weight species has grown. In the article, the three main variants of CDMS are described, along with an overview of recent applications.

Importin ß Can Bind Hepatitis B Virus Core Protein and Empty Core-Like Particles and Induce Structural Changes.

Hepatitis B virus (HBV) capsids are found in many forms: immature single-stranded RNA-filled cores, single-stranded DNA-filled replication intermediates, mature cores with relaxed circular double-stranded DNA, and empty capsids. A capsid, the protein shell of the core, is a complex of 240 copies of core protein. Mature cores are transported to the nucleus by a complex that includes both importin α and importin ß (Impα and Impß), which bind to the core protein's C-terminal domains (CTDs). Here we have investigated the interactions of HBV core protein with importins in vitro. Strikingly, empty capsids and free core protein can bind Impß without Impα. Cryo-EM image reconstructions show that the CTDs, which are located inside the capsid, can extrude through the capsid to be bound by Impß. Impß density localized on the capsid exterior near the quasi-sixfold vertices, suggested a maximum of 30 Impß per capsid. However, examination of complexes using single molecule charge-detection mass spectrometry indicate that some complexes include over 90 Impß molecules. Cryo-EM of capsids incubated with excess Impß shows a population of damaged particles and a population of "dark" particles with internal density, suggesting that Impß is effectively swallowed by the capsids, which implies that the capsids transiently open and close and can be destabilized by Impß. Though the in vitro complexes with great excess of Impß are not biological, these results have implications for trafficking of empty capsids and free core protein; activities that affect the basis of chronic HBV infection.

Resolving Adeno-Associated Viral Particle Diversity With Charge Detection Mass Spectrometry.

Recombinant adeno-associated viruses (AAVs) are promising vectors for human gene therapy. However, current methods for evaluating AAV particle populations and vector purity are inefficient and low resolution. Here, we show that charge detection mass spectrometry (CDMS) can resolve capsids that contain the entire vector genome from those that contain partial genomes and from empty capsids. Measurements were performed for both single-stranded and self-complementary genomes. The self-complementary AAV vector preparation appears to contain particles with partially truncated genomes averaging at half the genome length. Comparison to results from electron microscopy with manual particle counting shows that CDMS has no significant mass discrimination in the relevant mass range (after a correction for the ion velocity is taken into account). Empty AAV capsids are intrinsically heterogeneous, and capsids from different sources have slightly different masses. However, the average masses of both the empty and full capsids are in close agreement with expected values. Mass differences between the empty and full capsids for both single-stranded and self-complementary AAV vectors indicate that the genomes are largely packaged without counterions.

Charge Detection Mass Spectrometry Identifies Preferred Non-Icosahedral Polymorphs in the Self-Assembly of Woodchuck Hepatitis Virus Capsids.

Woodchuck hepatitis virus (WHV) is prone to aberrant assembly in vitro and can form a broad distribution of oversized particles. Characterizing aberrant assembly products is challenging because they are both large and heterogeneous. In this work, charge detection mass spectrometry (CDMS) is used to measure the distribution of WHV assembly products. CDMS is a single-particle technique where the masses of individual ions are determined from simultaneous measurement of each ion's charge and m/z (mass-to-charge) ratio. Under relatively aggressive, assembly promoting conditions, roughly half of the WHV assembly products are T=4 capsids composed of exactly 120 dimers while the other half are a broad distribution of larger species that extends to beyond 210 dimers. There are prominent peaks at around 132 dimers and at 150 dimers. In part, the 150 dimer complex can be attributed to elongating a T=4 capsid along its 5-fold axis by adding a ring of hexamers. However, most of the other features cannot be explained by existing models for hexameric defects. Cryo-electron microscopy provides evidence of elongated capsids. However, image analysis reveals that many of them are not closed but have "spiral-like" morphologies. The CDMS data indicate that oversized capsids have a preference for growth by addition of 3 or 4 dimers, probably by completion of hexameric vertices.

Charge Detection Mass Spectrometry for Single Ions with an Uncertainty in the Charge Measurement of 0.65 e.

Charge detection mass spectrometry (CDMS) provides a direct measure of the mass of individual ions through nondestructive, simultaneous measurements of the mass to charge ratio and the charge. To improve the accuracy of the charge measurement, ions are trapped and recirculated through the charge detector. By substantially extending the trapping time, the uncertainty in the charge determination has been reduced by a factor of two, from 1.3 elementary charges (e) to 0.65 e. The limit of detection (the smallest charge that can be reliably measured) has been reduced by about the same proportion, from 13 to 7 e. The more precise charge measurements enable a substantial improvement in the mass resolution, which is critical for applications of CDMS to mixtures of high mass ions.

Detection of late intermediates in virus capsid assembly by charge detection mass spectrometry.

The assembly of hundreds of identical proteins into an icosahedral virus capsid is a remarkable feat of molecular engineering. How this occurs is poorly understood. Key intermediates have been anticipated at the end of the assembly reaction, but it has not been possible to detect them. In this work we have used charge detection mass spectrometry to identify trapped intermediates from late in the assembly of the hepatitis B virus T = 4 capsid, a complex of 120 protein dimers. Prominent intermediates are found with 104/105, 110/111, and 117/118 dimers. Cryo-EM observations indicate the intermediates are incomplete capsids and, hence, on the assembly pathway. On the basis of their stability and kinetic accessibility we have proposed plausible structures. The prominent trapped intermediate with 104 dimers is attributed to an icosahedron missing two neighboring facets, the 111-dimer species is assigned to an icosahedron missing a single facet, and the intermediate with 117 dimers is assigned to a capsid missing a ring of three dimers in the center of a facet.

Charge detection mass spectrometry of bacteriophage P22 procapsid distributions above 20 MDa.

RATIONALE: Charge state resolution is required to determine the masses of ions in electrospray mass spectrometry, a feat which becomes increasingly difficult as the mass increases. Charge detection mass spectrometry (CDMS) circumvents this limitation by simultaneously measuring the charge and the m/z of individual ions. In this work, we have used electrospray CDMS to determine the number of scaffolding proteins associated with bacteriophage P22 procapsids. METHODS: P22 procapsids containing a native cargo of scaffolding protein were assembled in E. coli and purified via differential centrifugation. Electrospray CDMS was used to measure their mass distribution. RESULTS: The procapsid peak was centered at 23.60 MDa, which indicates that they contain an average of ~112 scaffolding proteins. The distribution is relatively narrow, less than 31 scaffolding proteins wide. In addition, a peak at 19.84 MDa with a relative abundance of ~15% is attributed to empty capsids. Despite having the same sizes in solution, the empty capsid and the procapsid have significantly different average charges. CONCLUSIONS: The detection of empty capsids is unexpected and the process that leads to them is unknown. The average charge on the empty capsids is significantly lower than expected from the charge residue model, which probably indicates that the empty capsids have contracted in the gas phase. The scaffolding protein presumably limits the contraction of the procapsids. This work shows that electrospray CDMS can provide valuable information for masses greater than 20 MDa.

Charge detection mass spectrometry with resolved charge states.

Charge detection mass spectrometry (CDMS) measurements have been performed for cytochrome c and alcohol dehydrogenase (ADH) monomer using a modified cone trap incorporating a cryogenically cooled JFET. Cooling the JFET increases its transconductance and lowers thermal noise, improving the signal to noise (S/N) ratio. Single ions with as few as 9 elementary charges (e) have been detected. According to simulations, the detection efficiency for ions with a charge of 13 e is 75%, and for charges above 13 e the detection efficiency rapidly approaches 95%. With the low limit of detection achieved here, adjacent charge states are easily resolved in the m/z spectrum, so the accuracy and precision of the image charge measurements can be directly evaluated by comparing the measured image charge to the charge deduced from the m/z spectrum. For ADH monomer ions with 32 to 43 charges, the root mean square deviation of the measured image charge is around 2.2 e. Ions were trapped for over 1500 cycles. The number of cycles detected appears to be limited mainly by collisions with the background gas.

Cytotoxic and other metabolites of Aspergillus inhabiting the rhizosphere of Sonoran desert plants.

In a study to discover potential anticancer agents from rhizosphere fungi of Sonoran desert plants cytotoxic EtOAc extracts of four Aspergillus strains have been investigated. Two new metabolites, terrequinone A (1) and terrefuranone (2), along with Na-acetyl aszonalemin (LL-S490beta) (3) were isolated from As. terreus occurring in the rhizosphere of Ambrosia ambrosoides, whereas As. terreus inhabiting the rhizosphere of an unidentified Brickellia sp. afforded dehydrocurvularin (4), 11-methoxycurvularin (5), and 11-hydroxycurvularin (6). As. cervinus isolated from the rhizosphere of Anicasanthus thurberi contained two new compounds, 4R*,5S*-dihydroxy-3-methoxy-5-methylcyclohex-2-enone (7) and 6-methoxy-5(6)-dihydropenicillic acid (8), in addition to penicillic acid (9). Penicillic acid was also isolated from As. wentii occurring in the rhizosphere of Larrea tridentata. The structures of 1-9 were elucidated by spectroscopic methods and chemical derivatizations. Acetylation of 2 afforded 14-acetylterrefuranone (13) and 14-deoxy-13(14)-dehydroterrefuranone (14). Metabolites 1-9, the dienone 14, and 5(6)-dihydropenicillic acid (16) were evaluated for cytotoxicity in a panel of four human cancer cell lines and in normal human primary fibroblast cells. Compounds 4 and 5 displayed considerable cytotoxicity, whereas 1, 6, 9, and 14 were found to be moderately active, with 6 and 9 exhibiting selective cytotoxicity against cancer cell lines compared with the normal fibroblast cells.