Multi-energy reconstructions, central electron temperature measurements, and early detection of the birth and growth of runaway electrons using a versatile soft x-ray pinhole camera at MST.

A multi-energy soft x-ray pinhole camera has been designed, built, and deployed at the Madison Symmetric Torus to aid the study of particle and thermal transport, as well as MHD stability physics. This novel imaging diagnostic technique employs a pixelated x-ray detector in which the lower energy threshold for photon detection can be adjusted independently on each pixel. The detector of choice is a PILATUS3 100 K with a 450 µm thick silicon sensor and nearly 100 000 pixels sensitive to photon energies between 1.6 and 30 keV. An ensemble of cubic spline smoothing functions has been applied to the line-integrated data for each time-frame and energy-range, obtaining a reduced standard-deviation when compared to that dominated by photon-noise. The multi-energy local emissivity profiles are obtained from a 1D matrix-based Abel-inversion procedure. Central values of Te can be obtained by modeling the slope of the continuum radiation from ratios of the inverted radial emissivity profiles over multiple energy ranges with no a priori assumptions of plasma profiles, magnetic field reconstruction constraints, high-density limitations, or need of shot-to-shot reproducibility. In tokamak plasmas, a novel application has recently been tested for early detection, 1D imaging, and study of the birth, exponential growth, and saturation of runaway electrons at energies comparable to 100 × Te,0; thus, early results are also presented.

Calibration of a versatile multi-energy soft x-ray diagnostic for WEST long pulse plasmas.

A compact multi-energy soft x-ray diagnostic is being installed on the W Environment in Steady-state Tokamak (WEST), which was designed and built to test ITER-like tungsten plasma facing components in a long pulse (∼1000 s) scenario. The diagnostic consists of a pinhole camera fielded with the PILATUS3 photon-counting Si-based detector (≲100 kpixel). The detector has sensitivity in the range 1.6-30 keV and enables energy discrimination, providing a higher energy resolution than conventional systems with metal foils and diodes with adequate space and time resolution (≲1 cm and 2 ms). The lower-absorption cut-off energy is set independently on each one of the ∼100 kpixels, providing a unique opportunity to measure simultaneously the plasma emissivity in multiple energy ranges and deduce a variety of plasma parameters (e.g., Te, nZ, and ΔZeff). The energy dependence of each pixel is calibrated here over the range 3-22 keV. The detector is exposed to a variety of monochromatic sources-fluorescence emission from metallic targets-and for each pixel, the lower energy threshold is scanned to calibrate the energy dependence. The data are fit to a responsivity curve ("S-curve") that determines the mapping between the possible detector settings and the energy response for each pixel. Here, the calibration is performed for three energy ranges: low (2.3-6 keV), medium (4.5-13.5 keV), and high (5.4-21 keV). We determine the achievable energy resolutions for the low, medium, and high energy ranges as 330 eV, 640 eV, and 950 eV, respectively. The main limitation for the energy resolution is found to be the finite width of the S-curve.

Multi-energy calibration of a PILATUS3 CdTe detector for hard x-ray measurements of magnetically confined fusion plasmas.

A multi-energy hard x-ray pin-hole camera based on the PILATUS3 X 100K-M CdTe detector has been developed at the Princeton Plasma Physics Laboratory for installation on the Tungsten Environment in Steady State Tokamak. This camera will be employed to study thermal plasma features such as electron temperature as well as non-thermal effects such as fast electron tails produced by a lower hybrid radiofrequency current drive and the birth of runaway electrons. The innovative aspect of the system lies in the possibility of setting the threshold energy independently for each of the ∼100k pixels of the detector. This feature allows for the measurement of the x-ray emission in multiple energy ranges with adequate space and time resolution (∼1 cm, 2 ms) and coarse energy resolution. In this work, the energy dependence of each pixel was calibrated within the range 15 keV-100 keV using a tungsten x-ray tube and emission from a variety of fluorescence targets (from yttrium to uranium). The data corresponding to pairs of Kα emission lines are fit to the characteristic responsivity ("S-curve"), which describes the detector sensitivity across the 64 possible energy threshold values for each pixel; this novel capability is explored by fine-tuning the voltage of a six-bit digital-analog converter after the charge-sensitive amplifier for each of the ∼100k pixels. This work presents the results of the calibration including a statistical analysis. It was found that the achievable energy resolution is mainly limited by the width of the S-curve to 3 keV-10 keV for threshold energies up to 50 keV, and to ≥20 keV for energies above 60 keV.

Vacuum-compatible photon-counting hybrid pixel detector for wide-angle x-ray scattering, x-ray diffraction, and x-ray reflectometry in the tender x-ray range.

A vacuum-compatible photon-counting hybrid pixel detector has been installed in the ultra-high vacuum reflectometer of the four-crystal monochromator beamline of the Physikalisch-Technische Bundesanstalt at the electron storage ring BESSY II in Berlin, Germany. The setup is based on the PILATUS3 100K module. The detector can be used in the entire photon energy range accessible at the beamline from 1.75 keV to 10 keV. Complementing the already installed vacuum-compatible PILATUS 1M detector used for small-angle x-ray scattering (SAXS) and grazing incidence SAXS, it is possible to access larger scattering angles. The water-cooled module is located on the goniometer arm and can be positioned from -90° to 90° with respect to the incoming beam at a distance of about 200 mm from the sample. To perform absolute scattering experiments, the linearity, homogeneity, and angular dependence of the quantum efficiency, including their relative uncertainties, have been investigated. In addition, the first results of the performance in wide-angle x-ray scattering, x-ray diffraction, and x-ray reflectometry are presented.

Entanglement and manipulation of the magnetic and spin-orbit order in multiferroic Rashba semiconductors.

Entanglement of the spin-orbit and magnetic order in multiferroic materials bears a strong potential for engineering novel electronic and spintronic devices. Here, we explore the electron and spin structure of ferroelectric α-GeTe thin films doped with ferromagnetic Mn impurities to achieve its multiferroic functionality. We use bulk-sensitive soft-X-ray angle-resolved photoemission spectroscopy (SX-ARPES) to follow hybridization of the GeTe valence band with the Mn dopants. We observe a gradual opening of the Zeeman gap in the bulk Rashba bands around the Dirac point with increase of the Mn concentration, indicative of the ferromagnetic order, at persistent Rashba splitting. Furthermore, subtle details regarding the spin-orbit and magnetic order entanglement are deduced from spin-resolved ARPES measurements. We identify antiparallel orientation of the ferroelectric and ferromagnetic polarization, and altering of the Rashba-type spin helicity by magnetic switching. Our experimental results are supported by first-principles calculations of the electron and spin structure.

Single domain spin manipulation by electric fields in strain coupled artificial multiferroic nanostructures.

We demonstrate in situ 90° electric field-induced uniform magnetization rotation in single domain submicron ferromagnetic islands grown on a ferroelectric single crystal using x-ray photoemission electron microscopy. The experimental findings are well correlated with micromagnetic simulations, showing that the reorientation occurs by the strain-induced magnetoelectric interaction between the ferromagnetic nanostructures and the ferroelectric crystal. Specifically, the ferroelectric domain structure plays a key role in determining the response of the structure to the applied electric field, resulting in three strain-induced regimes of magnetization behavior for the single domain islands.

Nitrate and nitrite concentrations in rabbit saliva Comparison with rat saliva.

The purpose of this work was to investigate the interest of rabbits for studying pharmacology and toxicology of dietary nitrate. Twenty-one females were given 1, 300 and 600mg/l nitrate in drinking water for 11 weeks. Saliva and blood were analysed for nitrate/nitrite. There is a linear relationship between the amounts of nitrate ingested and amount of nitrate in saliva, contrary to what is observed in rats. However, salivary nitrite concentrations remain low, and nitrate reductase activity in the oral cavity of the rabbit seems very weak.

Remanence due to wall magnetization and counterintuitive magnetometry data in 200-nm films of Ni.

200-nm-thick Ni films in an epitaxial Cu/Ni/Cu/Si(001) structure are expected to have an in-plane effective magnetic anisotropy. However, the in-plane remanence is only 42%, and magnetic force microscopy domain images suggest perpendicular magnetization. Quantitative magnetic force microscopy analysis can resolve the inconsistencies and show that (i) the films have perpendicular domains capped by closure domains with magnetization canted at 51 degrees from the film normal, (ii) the magnetization in the Bloch domain walls between the perpendicular domains accounts for the low in-plane remanence, and (iii) the perpendicular magnetization process requires a short-range domain wall motion prior to wall-magnetization rotation and is nonhysteretic, whereas the in-plane magnetization requires long-range motion before domain-magnetization rotation and is hysteretic.

Rapid and simple determination of oxolinic acid and oxytetracycline in the shell of the blue mussel (Mytilus edulis) by high-performance liquid chromatography.

A simple procedure for the determination of oxolinic acid (OA) and oxytetracycline (OTC), two antibacterial agents, in the shell of the blue mussel (Mytilus edulis), using reversed-phase high-performance liquid chromatography is described. Liquid chromatography was performed on a 5-microm LiChroSpher 100 RP-18E column using acetonitrile and a 0.02 M orthophosphoric acid solution as the mobile phase, with ultraviolet detection. After roughly grinding the shell, drugs were extracted using a methanolic oxalic acid solution. Linearity and precision were checked over the concentration range 0.04-0.32 microg/g. Limits of detection of OA and OTC were 0.012 and 0.008 microg/g, respectively. Mean extraction recoveries of OA and OTC from mussel shell were 72.9 and 65.4%, respectively. To demonstrate the usefulness of the analytical procedure, an experimental study was performed in blue mussels exposed to the drugs for eight days.