Combining high energy ball milling and liquid crystal templating method to prepare magnetic ordered mesoporous silica. A physico-chemical investigation.

The physico-chemical investigation of superparamagnetic MCM41 like materials prepared by the novel combination of high energy ball milling and a liquid crystal templating method is presented. Structural, morphological, textural, thermal, and preliminary magnetic characterization demonstrated the successful combination of the two synthesis techniques, avoiding the problems associated with the current methods used for the preparation of magnetic ordered mesoporous silica. MCM41 like materials with high specific surface area values (625-720 m2 g-1) and high mesopore volumes in the range 1-0.7 cm3 g-1 were obtained. The ordered mesoporous structure and accessible pores were maintained after the inclusion of increasing amounts of the magnetic component in the silica structure. All the samples showed superparamagnetic behaviour.

Centella asiatica extract-SiO2 nanocomposite: More than a drug-delivery system for skin protection from oxidative damage.

An innovative nanotechnology-based approach was used for the preparation of Centella asiatica (C. asiatica) extract-SiO2 nanocomposites, specifically tailored for skin protection from oxidative damage. Different amounts of C. asiatica glycolic extract (1.0, 3.0, 5.0, and 10.0 wt %) and fumed silica were used to prepare the nanocomposites by means of ball milling method. The influence of both composition of the starting mixture and milling time on the final products was evaluated by different techniques such as X-ray powder diffraction, scanning electron microscopy, infrared spectroscopy, thermogravimetric analysis, and nitrogen sorption analysis. Results confirmed the integrity of the natural extract after the milling process, and its successful loading in the silica matrix. No cytotoxicity was observed for the obtained nanocomposites, which showed high in-vitro ability to scavenge 2,2-diphenyl-1-picrylhydrazyl and to protect human keratinocytes from damages induced with hydrogen peroxide.

Green Preparation of Antimicrobial 1D-Coordination Polymers: [Zn(4,4'-bipy)Cl2]∞ and [Zn(4,4'-bipy)2(OAc)2]∞ by Ultrasonication of Zn(II) Salts and 4,4'-Bipyridine.

We report on the green preparation of one-dimensional metal coordination polymers by sonochemical approach. The spacer ligand 4,4'-bipyridine was ultrasonicated with chloride or acetate zinc salts to obtain [Zn(4,4'-bipy)Cl2]∞ and [Zn(4,4'-bipy)2(OAc)2]∞, respectively. Benign solvents such as ethanol and water were selected as reaction media, and the synthesis took place in a few minutes-a very short time compared to conventional methods where some days' synthesis is required. X-ray powder diffraction, Fourier transform infrared spectroscopy, thermal analysis (thermogravimetric and differential scanning calorimetry), and CHN techniques investigated the influence of using different reaction solvents on the chemical, structural, and thermal properties of the final products. The 1D [Zn(4,4'-bipy)Cl2]∞ and [Zn(4,4'-bipy)2(OAc)2]∞ polymers, in agreement with the structures reported in the literature, were obtained in the form of nanocrystals with an average crystal size around 100 nm. As a proof of concept, a set of Gram-positive (Staphylococcus aureus) and Gram-negative bacteria (Klebsiella pneumoniae), and three yeast strains (Candida albicans, Candida krusei, Candida glabrata) were tested to evaluate the antimicrobial activity of the coordination polymers, following the Kirby-Bauer procedure and microplate dilution method. Thus, minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), and minimal biofilm inhibitory concentration (MBIC) were evaluated. Except for Candida krusei, the compounds showed an appreciable antimicrobial and antibiofilm activity against these strains grown in the liquid medium.

High Energy Ball Milling and Liquid Crystal Template Method: A Successful Combination for the Preparation of Magnetic Nano-Platforms.

In this study, we present the preparation of superparamagnetic ordered mesoporous silica (SOMS) for biomedical applications by the combination of high energy ball milling (HEBM) and the liquid crystal template method (LCT) to produce a material comprised of room temperature superparamagnetic Fe3O4 nanoparticles in a MCM-41 like mesostructured silica. In a typical synthesis, a mixture of Fe2O3 and silica was sealed in a stainless-steel vial with steel balls. Ball milling experiments were performed in a vibratory mill apparatus. The milling process produced nanocomposites with an average size ranging from ∼100-200 nm, where the Fe3O4 nanoparticles (4.8 nm size) are homogeneously dispersed into the amorphous SiO2 matrix. The obtained nanocomposite has been used for the preparation of the SOMS through the LCT method. Structural, morphological and textural characterization were performed using X-ray powder diffraction, transmission electron microscopy and nitrogen sorption analysis. Field dependence of magnetization was investigated and showed superparamagnetic behaviour at 300 K with a value of saturation magnetization (Ms) that is of interest for biomedical applications.

Exploring the Effect of Iron Metal-Organic Framework Particles in Polylactic Acid Membranes for the Azeotropic Separation of Organic/Organic Mixtures by Pervaporation.

A microporous carboxylate metal-organic framework MIL-100 Fe was prepared as submicron particles by microwave-assisted hydrothermal synthesis (Fe-MOF-MW). This product was explored, for the first time, for the preparation of polylactic acid (PLA) mixed matrix membranes. The produced MOF was characterised by powder X-ray diffraction (PXRD), environmental scanning electron microscopy (ESEM) as well as by thermogravimetric analysis (TGA) and nitrogen adsorption/desorption. The effect of different Fe-MOF-MW concentrations (0.1 and 0.5 wt%) on the membrane properties and performance were evaluated. These membranes were used in the pervaporation process for the separation of methanol/methyl tert-butyl-ether mixtures at the azeotropic point. The influence of the feed temperature and vacuum pressure on the membrane performance was evaluated and the results were compared with PLA pristine membranes. Moreover, the produced membranes have been characterised in terms of morphology, MOF dispersion in the polymeric membrane matrix, wettability, thickness, mechanical resistance and swelling propensity. The presence of Fe-MOF-MW was found to have a beneficial effect in improving the selectivity of mixed matrix membranes towards methanol at both concentrations. The highest selectivity was obtained for the PLA membranes embedded with 0.5 wt% of Fe-MOF-MW and tested at the temperature of 25 °C and vacuum pressure of 0.09 mbar.

Microemulsions: The Renaissance of Ferrite Nanoparticle Synthesis.

Ferrite nanoparticles (NPs) are of special interest for a wide range of applications. Microemulsions represent the Renaissance of ferrite NP preparation offering a series of advantages with respect to other methods due the possibility to confine reactions into nanosized reactors. They allow the preparation in mild synthesis conditions of a wide variety of nanostructured ferrites with controlled composition, particle size and shape. This review wants to give a comprehensive overview of the microemulsion performance in the ferrite NP synthesis. Firstly, a general section on microemulsion properties is presented. The basics of NP formation mechanism, with a first-rate emphasis in the influence of microemulsion properties and dynamics on the control of NP size and shape, are addressed. A summary of the synthesis procedure evolution by both direct and reverse microemulsions over a selection of ferrite NPs is also provided in the review. Finally, the perspectives on microemulsion systems for ferrite NP preparation are quickly revised.

Formation of metallic silver and copper in non-aqueous media by ultrasonic radiation.

Concentrated suspensions of silver and copper salts in silicone oil were heated to 200 °C and irradiated with ultrasonic energy for different time durations. Characterization of the products was done using X-ray powder diffraction. In most cases, metallic Ag or Cu were obtained, together with their oxide forms Ag2O and Cu2O. The salts, used as precursors, do not dissolve in silicone oil but rather form a heterogeneous system, and we assume that local heating, caused by the acoustic cavitation, enhanced their thermal decomposition and the formation of metallic particles. It was found that the presence of silver particles enhances the formation of metallic copper. This phenomenon was observed in the experiment with the acetate salts mixture.

Synthesis and thermodynamics of Ag-Cu nanoparticles.

Metallic silver, copper, and Ag-Cu nanoparticles (NPs) have been produced by a chemical reduction method. The obtained nanoparticles were characterized by powder X-ray diffraction (XRD) and transmission electron microscopy (TEM). A side-segregated configuration was observed for the one-pot synthesized Ag-Cu NPs, and the melting temperature depression of about 14 °C was found by differential scanning calorimetry (DSC). A comparison between the new experimental data, the literature data on Ag-Cu bimetallic NPs and the corresponding theoretical values obtained from the Ag-Cu nano-sized phase diagram was done, whereas the melting behaviour of Ag and Cu metal nanoparticles was discussed in the framework of the liquid layer model (LLM).

Characterization and cytotoxicity studies on liposome-hydrophobic magnetite hybrid colloids.

The aim of this study was to highlight the main features of magnetoliposomes prepared by TLE, using hydrophobic magnetite, and stabilized with oleic acid, instead of using the usual hydrophilic magnetite surrounded by sodium citrate. These biocompatible magnetoliposomes (MLs) were prepared with the purpose of producing a magnetic carrier capable of loading either hydrophilic or lipophilic drugs. The effect of different liposome/magnetite weight ratios on the stability of magnetoliposomes was evaluated by monitoring the mean diameter of the particles, their polydispersity index, and zeta potential over time. The prepared magnetoliposomes showed a high liposome-magnetite association, with magnetoliposomes containing PEG (polyethylene glycol) showing the best magnetite loading values. To verify the position of magnetite nanoparticles in the vesicular structures, the morphological characteristics of the structures were studied using transmission electron microscopy (TEM). TEM studies showed a strong affinity between hydrophobic magnetite nanoparticles, the surrounding oleic acid molecules, and phospholipids. Furthermore, the concentration above which one would expect to find a cytotoxic effect on cells as well as morphological cell-nanoparticle interactions was studied in situ by using the trypan blue dye exclusion assay, and the Prussian Blue modified staining method.

Drug silica nanocomposite: preparation, characterization and skin permeation studies.

The aim of this work was to evaluate silica nanocomposites as topical drug delivery systems for the model drug, caffeine. Preparation, characterization, and skin permeation properties of caffeine-silica nanocomposites are described. Caffeine was loaded into the nanocomposites by grinding the drug with mesoporous silica in a ball mill up to 10 h and the efficiency of the process was studied by XRPD. Formulations were characterized by several methods that include FTIR, XRPD, SEM and TEM. The successful loading of caffeine was demonstrated by XRPD and FTIR. Morphology was studied by SEM that showed particle size reduction while TEM demonstrated formation of both core-shell and multilayered caffeine-silica structures. Solid-state NMR spectra excluded chemical interactions between caffeine and silica matrix, thus confirming that no solid state reactions occurred during the grinding process. Influence of drug inclusion in silica nanocomposite on the in vitro caffeine diffusion into and through the skin was investigated in comparison with a caffeine gel formulation (reference), using newborn pig skin and vertical Franz diffusion cells. Results from the in vitro skin permeation experiments showed that inclusion into the nanocomposite reduced and delayed caffeine permeation from the silica nanocomposite in comparison with the reference, independently from the amount of the tested formulation.

PEGylation and preliminary biocompatibility evaluation of magnetite-silica nanocomposites obtained by high energy ball milling.

High energy ball milling (HEBM) has been used for the first time to prepare PEGylated magnetite-silica (Fe(3)O(4)-SiO(2)) nanocomposites intended to be used for biological purposes. Surface amine groups were introduced by a silanization reaction involving 3-aminopropyl triethoxysilane (APTS) followed by PEGylation to yield long-term stable and stealth nanocomposites of 200nm in diameter. The efficient coverage by PEG chains was shown by isothermal titration calorimetry (ITC) where PEGylated nanocomposites did not interact with BSA compared to non-PEGylated counterparts which led to a significant change in enthalpy. By cell viability (MTT) assays and cell morphology investigations, it was evidenced that PEGylated Fe(3)O(4)-SiO(2) nanocomposites did not provide any appreciable cytotoxicity on J774 macrophage and MCF-7 breast cancer cell lines. Furthermore, noticeable internalization was evidenced by J774 cells with PEGylated Fe(3)O(4)-SiO(2) nanocomposites in contrast to MCF-7 cells, in good agreement with the respective tendency of each cell line for endocytosis.