ß-carotene and α-tocopherol coencapsulated in nanostructured lipid carriers of murumuru (Astrocaryum murumuru) butter produced by phase inversion temperature method: characterisation, dynamic in vitro digestion and cell viability study.

Hydrophobic bioactives can be more easily incorporated into food and have their bioavailability enhanced if nanostructured lipid carriers (NLC) are used as carriers. In the present study, beta-carotene-loaded NLC were produced by low emulsification using murumuru butter and a mixture of Span 80 and Cremophor RH40 as surfactants. Their average diameter was 35 nm and alpha-tocopherol was required to protect the encapsulated ß-carotene. Besides the evaluation of their physicochemical stability, NLC were submitted to dynamic in vitro digestion and cell viability assays with Caco-2 and HEPG cells. The bioaccessibility of beta-carotene in the dynamic system was about 42%. Regarding cell viability, results indicated NLC were toxic to the cell cultures tested. Such high toxicity is probably related to the type of surfactant used and to the extremely reduced particle size, which may have led to an intense and fast permeation of the NLC through the cells.

Physical and thermal processing of Waste Printed Circuit Boards aiming for the recovery of gold and copper.

The recovery of electronic waste to obtain secondary raw materials is a subject of high relevance in the context of circular economy. Accordingly, the present work relies on the evaluation of mining separation/concentration techniques (comminution, size screening, magnetic separation and gravity concentration) alone as well as combined with thermal pre-treatment to recover gold and copper from Waste Printed Circuit Boards. For that purpose, Waste Printed Circuit Boards were subjected to physical processing (comminution, size screening in 6 classes from <0.425 mm to > 6.70 mm, magnetic separation and gravity concentration) alone and combined with thermal treatment (200-500 °C), aiming the recovery of gold and copper. Mixed motherboards and graphic cards (Lot 1 and 3) and highly rich components (connectors separated from memory cards, Lot 2) were analyzed. Gold and copper concentrations were determined before and after treatment. Before treatment, concentrations from 0.01 to 0.6 % wt. and from 9 to 20 % wt. were found for gold and copper respectively. The highest concentrations were observed in the size fractions between 0.425 and 1.70 mm. The highest copper concentration was around 35 % wt. (class 0.425-0.85 mm) and when analyzing memory card connectors alone, gold concentrations reached almost 2% in the same class, reflecting the interest of separating such components. The physical treatment alone was more effective for Lot 1/3, compared to Lot 2, allowing recoveries of 67 % wt. and 87 % wt. for gold and copper respectively, mostly due to differences in particles size and shape. The thermal treatment showed unperceptive influence on gold concentration but significant effect for copper concentration, mostly attributed to the size of the copper particles. Concentrations increased in a factor of around 10 when the thermal treatment was performed at 300 °C for the larger particles (1.70-6.70 mm); the best results were obtained at 400 °C for the other sizes, when the highest rate of thermal decomposition of the material occurred.

Effect of agitation on the performance of an anaerobic sequencing batch biofilm reactor in the treatment of dairy effluents.

Agitation rate is an important parameter in the operation of Anaerobic Sequencing Biofilm Batch Reactors (ASBBRs), and a proper agitation rate guarantees good mixing, improves mass transfer, and enhances the solubility of the particulate organic matter. Dairy effluents have a high amount of particulate organic matter, and their anaerobic digestion presents inhibitory intermediates (e.g., long-chain fatty acids). The importance of studying agitation in such batch systems is clear. The present study aimed to evaluate how agitation frequency influences the anaerobic treatment of dairy effluents. The ASBBR was fed with wastewater from milk pasteurisation process and cheese manufacture with no whey segregation. The organic matter concentration, measured as chemical oxygen demand (COD), was maintained at approximately 8,000 mg/L. The reactor was operated with four agitation frequencies: 500 rpm, 350 rpm, 200 rpm, and no agitation. In terms of COD removal efficiency, similar results were observed for 500 rpm and 350 rpm (around 90%) and for 200 rpm and no agitation (around 80%). Increasing the system's agitation thus not only improved the global efficiency of organic matter removal but also influenced volatile acid production and consumption and clearly modified this balance in each experimental condition.

Liposomes incorporating essential oil of Brazilian cherry (Eugenia uniflora L.): characterization of aqueous dispersions and lyophilized formulations.

Multilamellar liposomes incorporating essential oil of Brazilian cherry (Eugenia uniflora L.) leaves were produced by dry film hydration. Gas chromatography demonstrated the compounds found in the essential oil were effectively incorporated in the aqueous dispersions of liposomes. Differential scanning calorimetry analyses revealed the incorporation of the essential oil did not cause phase separation in the membrane structure; the gel-liquid crystalline transition temperature (main transition) remained the same despite the higher heterogeneity indicated by the transition peak broadening. Different cryoprotectors (sucrose and trehalose) were added to the liposomal formulations to be tested in their ability to protect the liposomal structure during the lyophilization. The morphological aspect of the lyophilized powders analysed by scanning electron microscopy showed significant differences among the samples with and without cryoprotectors. Fourier-transform infrared spectroscopy indicated the cryoprotectors interacted effectively with the polar heads of phospholipids in the bilayer. In terms of water absorption, trehalose was identified as a much more effective protector agent against it than sucrose. The cryoprotectors showed different degrees of effectiveness of preservation of the liposomal structure when the rehydration assays of lyophilized liposomes were carried out, as particle size measurements indicated a moderate process of fusion when the formulations with sucrose were rehydrated.

Characterization of coatings for open-heart surgery tubing with heparin and lipid.

The aim of this study was to compare qualitative and quantitative methods for coating characterization on internal surfaces of polyvinyl chloride (PVC) tubing used in procedures of extracorporeal circulation. The methods of characterization included optical microscopy (OM) after dyeing with toluidine blue, scanning electron microscopy (SEM), atomic force microscopy (AFM) and energy dispersive spectrometry (EDS). OM after sample dyeing was excellent in allowing early detection of any absence or irregularities of coatings among the used methods. SEM was the most effective in observing the structure and thickness either in heparin coatings or in lipid coatings. AFM provided a good evaluation of the surface topography. A conjunction of all methods is recommended for complete characterization. The quantification methods based on colorimetric tests were efficient in determining the concentrations of heparin and lipid on internal surface tubes, the coating stability and the reproducibility of the results.