Performance analysis of a spectropolarimeter employing a continuous phase variation.

The light emitted or reflected by a medium can exhibit a certain degree of polarization. Most of the time, this feature brings valuable information about the environment. However, instruments able to accurately measure any type of polarization are hard to build and adapt to inauspicious environments, such as space. To overcome this problem, we presented recently a design for a compact and steady polarimeter, able to measure the entire Stokes vector in a single shot. The first simulations revealed a very high modulation efficiency of the instrumental matrix for this concept. However, the shape and the content of this matrix can change with the characteristics of the optical system, such as the pixel size, the wavelength or the number of pixels. To assess the quality of the instrumental matrices for different optical characteristics, we analyze here the propagation of errors, together with the impact of different types of noise. The results show that the instrumental matrices are converging towards an optimal shape. On this basis, the theoretical limits of sensitivity on the Stokes parameters are inferred.

Efficiency enhancement of perovskite solar cells based on opal-like photonic crystals.

Perovskite solar cells have shown a tremendous interest for photovoltaics since the past decade. However, little is known on the influence of light management using photonic crystals inside such structures. We present here numerical simulations showing the effect of photonic crystal structuring on the integrated quantum efficiency of perovskite solar cells. The photo-active layer is made of an opal-like perovskite structure (monolayer, bilayer or trilayer of perovskite spheres) built in a T i O 2 matrix. Fano resonances are exploited in order to enhance the absorption, especially near the bandgap of perovskite material. The excitation of quasi-guided modes inside the absorbing spheres enhances the integrated quantum efficiency and the photonic enhancement factor. More specifically, a photonic enhancement factor as high as 6.4% is predicted in the case of spheres monolayer compared to an unstructured perovskite layer. The influences of sphere's radius and incident angle on the absorbing properties are also estimated. Those numerical results can be applied to the nascent field of photonic structuring inside perovskite solar cells.

Infrared spectroscopy based on broadly tunable quantum cascade lasers and polycrystalline diamond waveguides.

Recently emerging broadly tunable quantum cascade lasers (tQCL) emitting in the mid-infrared (MIR) are a versatile alternative to well established thermal emitters in combination with interferometers as applied in Fourier transform infrared (FTIR) spectroscopy. The wide and highly spectrally resolved wavelength tuning characteristics along with superior spectral energy density renders laser-based vibrational spectroscopy methods an efficient alternative vs. conventional molecular spectroscopies. Using diamond in attenuated total reflection (ATR) sensing formats benefits from the physical robustness and chemical resistivity of the internal reflective element (IRE) material. While inherent material absorption frequently limits the optical path length within diamond ATR elements, the herein presented design combining bright tQCLs with a multi-reflection polycrystalline diamond (PCD) ATR element enables an optical beam path length of approximately 5 cm. Thereby, sensitive spectroscopic measurements in the MIR are enabled. As an example, non-invasive glucose monitoring in human saliva is examined, highlighting the potential benefits of the proposed analytical concept with regards to exquisite sensitivity and selectivity in combination with a robust sensing interface, i.e., diamond. This approach paves the way towards directly analyzing molecular constituents in complex and potentially corrosive biomedical and biochemical matrices.

Birefringence measurements of diamond space-variant subwavelength gratings.

Subwavelength gratings are gratings with periods smaller than the incident wavelength. They possess form birefringence, which depends on the grating parameters. This paper presents the results of an experimental method designed to measure the birefringent properties of diamond subwavelength gratings in the mid-infrared. The method consists of monitoring the intensity transmitted through one polarizer, a subwavelength grating, and a second polarizer for various orientations of the first polarizer. By fitting the intensity variation as a function of the orientation of the first polarizer, one can compute the phase shift induced by the grating, its local fast axis orientation, and the ratio of the transverse electric and transverse magnetic transmission efficiencies. The paper describes the method principle and its mathematical model. Then, several numerical simulations of different subwavelength gratings are presented and their results are discussed. Finally, the optical setup is described and the measurements of one subwavelength grating are displayed and compared with the values expected from the manufacturing process.

Polycrystalline Diamond Thin-Film Waveguides for Mid-Infrared Evanescent Field Sensors.

Photonic design and optimization of thin-film polycrystalline diamond waveguides are shown, serving as advanced evanescent field transducers in the mid-infrared fingerprint regime (2000-909 cm-1; 5-11 µm). Design constraints inherent to optical/system considerations and the material were implemented in a finite element method (FEM)-based simulation method that allowed three-dimensional modeling of the overall structure. Thus, lateral mode confinement, attenuation in the direction of radiation propagation, and physical resilience were evaluated. In a final step, the designed structures were fabricated, and their utility in combination with a broadly tunable external cavity quantum cascade laser for chemical sensing of a liquid phase analyte was demonstrated.

Polarization holography for vortex retarders recording: laboratory demonstration.

This paper will present a prototype of the first set of vortex retarders made of liquid crystal polymers recorded by polarization holography. Vortex retarders are birefringent plates characterized by a rotation of their fast axis. Liquid crystals possess birefringent properties and they are locally orientable. Their orientation is defined by the perpendicular to the local orientation of the recording field. Polarization holography is a purely optical recording method. It is based on the superimposition of coherent and differently polarized beams. It is used to shape the electric field pattern to enable the recording of vortex retarders. The paper details the mathematical model of the superimposition process. The recording setup is exposed; it is characterized by a nearly common path interferometer. Two sets of measurements allowing the prediction of the retarder's features are presented and compared. Finally, the experimentally recorded retarder is shown, its characteristics are investigated and compared to the predicted ones.

Polarization holography for vortex retarders recording.

We present an original static recording method for vortex retarders (VRs) made from liquid crystal polymers (LCPs) using the superimposition of several polarized beams. VRs are birefringent plates characterized by a rotation of their fast axis about their center. The new method is based on polarization holography and photo-orientable LCP. Combining several polarized beams induces the polarization patterns required for the recording process of VRs without mechanical action. A mathematical description of the method, the outcomes of the numerical simulations, and the first experimental results are presented.