Porogen Concentration Effect on the Pore Structure and Properties Evolution of Polymer Monolith Based on Oligocarbonate Dimethacrylate OCM-2.

Porous polymer monolith materials of 2-mm thickness were obtained by visible light-induced radical polymerization of oligocarbonate dimethacrylate (OCM-2) in the presence of 1-butanol (10 to 70 wt %) as a porogenic additive. The pore characteristics and morphology of polymers were studied by mercury intrusion porosimetry and scanning electron microscopy. Monolithic polymers with both open and closed pores up to 100 nm in size are formed when the alcohol content in the initial composition is up to 20 wt %. The pore structure in such materials is a system of holes in the bulk of the polymer (hole-type pores). Open interconnected pores with a specific volume up to 2.22 cm3/g and modal pore size up to 10 microns are formed in the volume of the polymer with 1-butanol content of more than 30 wt %. Such porous monoliths are a structure of covalently bonded polymer globules (interparticle-type pores). The free space between the globules represents a system of open interconnected pores. In the transition region of 1-butanol concentrations (from 20 to 30 wt %), areas with both structures and intermediate frameworks, as well as honeycomb structures of polymer globules connected by bridges, are fixed on the polymer surface. It was found that the transition from one type of pore system to another is accompanied by a sharp change in the strength characteristics of the polymer. Approximation of experimental data using the sigmoid function made it possible to determine the concentration of the porogenic agent in the vicinity of which the percolation threshold is observed.

Novel Rigidochromic and Anti-Kasha Dual Emission Fluorophores Based on D-π-A Dyads as the Promising Materials for Potential Applications Ranging from Optoelectronics and Optical Sensing to Biophotonics and Medicine.

Today we see an increasing demand for new fluorescent materials exhibiting various sensory abilities due to their broad applicability ranging from the construction of flexible devices to bioimaging. In this paper, we report on the new fluorescent pigments AntTCNE, PyrTCNE, and PerTCNE which consist of 3-5 fused aromatic rings substituted with tricyanoethylene fragments forming D-π-A diad. Our studies reveal that all three compounds exhibit pronounced rigidochromic properties, i.e., strong sensitivity of their fluorescence to the viscosity of the local environment. We also demonstrate that our new pigments belong to a very rare type of organic fluorophores which do not obey the well-known empirical Kasha'rule stating that photoluminescence transition always occurs from the lowest excited state of an emitting molecule. This rare spectral feature of our pigments is accompanied by an even rarer capability of spectrally and temporally well-resolved anti-Kasha dual emission (DE) from both higher and lowest electronic states in non-polar solvents. We show that among three new pigments, PerTCNE has significant potential as the medium-bandgap non-fullerene electron acceptor. Such materials are now highly demanded for indoor low-power electronics and portable devices for the Internet-of-Things. Additionally, we demonstrate that PyrTCNE has been successfully used as a structural unit in template assembling of the new cyanoarylporphyrazine framework with 4 D-π-A dyads framing this macrocycle (Pyr4CN4Pz). Similarly to its structural unit, Pyr4CN4Pz is also the anti-Kasha fluorophore, exhibiting intensive DE in viscous non-polar medium and polymer films, which strongly depends on the polarity of the local environment. Moreover, our studies showed high photodynamic activity of this new tetrapyrrole macrocycle which is combined with its unique sensory capacities (strong sensitivity of its fluorescent properties to the local environmental stimuli such as viscosity and polarity. Thus, Pyr4CN4Pz can be considered the first unique photosensitizer that potentially enables the real-time combination of photodynamic therapy and double-sensory approaches which is very important for modern biomedicine.

Charge Transfer Chromophores Derived from 3d-Row Transition Metal Complexes.

A series of new charge transfer (CT) chromophores of "α-diimine-MII-catecholate" type (where M is 3d-row transition metals-Cu, Ni, Co) were derived from 4,4'-di-tert-butyl-2,2'-bipyridyl and 3,6-di-tert-butyl-o-benzoquinone (3,6-DTBQ) in accordance with three modified synthetic approaches, which provide high yields of products. A square-planar molecular structure is inherent for monomeric [CuII(3,6-Cat)(bipytBu)]∙THF (1) and NiII(3,6-Cat)(bipytBu) (2) chromophores, while dimeric complex [CoII(3,6-Cat)(bipytBu)]2∙toluene (3) units two substantially distorted heteroleptic D-MII-A (where D, M, A are donor, metal and acceptor, respectively) parts through a donation of oxygen atoms from catecholate dianions. Chromophores 1-3 undergo an effective photoinduced intramolecular charge transfer (λ = 500-715 nm, extinction coefficient up to 104 M-1·cm-1) with a concomitant generation of a less polar excited species, the energy of which is a finely sensitive towards solvent polarity, ensuring a pronounced negative solvatochromic effect. Special attention was paid to energetic characteristics for CT and interacting HOMO/LUMO orbitals that were explored by a synergy of UV-vis-NIR spectroscopy, cyclic voltammetry, and DFT study. The current work sheds light on the dependence of CT peculiarities on the nature of metal centers from various groups of the periodic law. Moreover, the "α-diimine-MII-catecholate" CT chromophores on the base of "late" transition elements with differences in d-level's electronic structure were compared for the first time.

Novel Antireflection Coatings Obtained by Low-Temperature Annealing in the Presence of Tetrabutylammonium Bromide and Gold Nanoparticles.

In this work, nanoporous antireflective coatings on silicate glass were obtained from silicon dioxide sol compositions by the sol-gel method in the presence of quaternary ammonium salt (tetrabutylammonium bromide) at different annealing temperatures (200-250 °C). Varying the salt concentration from 3 to 5 wt.%, we achieved the transmittance of the coatings of about 97% at 250 °C in comparison with 91% for clean glass in the wavelength range from 400 to 1100 nm. The addition of gold nanoparticles to the composition containing 5 wt.% tetrabutylammonium bromide allowed us to decrease the annealing temperature to 200 °C, preserving the transmittance at the level of 96.5%. For this case, the optimal concentration of gold nanoparticles is determined (2.6 × 10-9 mol/mL). According to the SEM analysis, the obtained antireflective coatings contain pores with a minimum area size up to 4 nm2.

Magnetically bistable cobalt-dioxolene complexes with a tetradentate N-donor base.

Synthesis and magnetic characterization of a family of cobalt-dioxolene complexes [(Me2TPA)Co(36-DBCat)] (1), [(Me2TPA)Co(36-DBCat)](PF6) (2) and [(Me2TPA)Co(diox-(OMe)3)](BPh4) (3) (Me2TPA = bis(6-methyl-2-pyridyl)methyl-(2-pyridylmethyl)amine; 36-DBCat = dianion of 3,6-di-tert-butylcatechol; diox-(OMe)3 - 2,5-di-tert-butyl-3,3,4-trimethoxy-6-oxocyclohexa-1,4-dienolate) is reported. The neutral complex 1 is found to form hexa- (CoO2N4, 1a) and pentacoordinated (CoO2N3, 1b) isomers. Variable temperature single crystal X-ray diffraction analysis of 1a and 1b clearly indicates the presence of the high-spin divalent metal ion and the dianionic catecholate form of the dioxolene ligand. Oxidation of 1 by ferrocenium hexafluorophosphate results in the formation of the ionic octahedral complex 2, demonstrating thermally induced valence-tautomeric transition (ls-CoIII-36-DBCat ⇄ hs-CoII-36-DBSQ) in the solid state with T1/2 = 175 K (36-DBSQ = radical-anionic semiquinonate form of the redox-ligand). In contrast, aerial oxidation of 1 is accompanied by changes in the structure of dioxolene resulting in oxocyclohexadienolate ligand and the formation of an ionic complex of high-spin divalent cobalt (3). Compounds 1a, 1b, and 3 are found to demonstrate a field-induced single-ion magnet behavior. The analysis of the electronic structures of 1, 2 and 3 with the aid of DFT and SA-CASSCF/NEVPT2 calculations is also given.

Complexes of Metal Halides with Unreduced o-(Imino)quinones.

A series of complexes of metal halides with unreduced quinone-type ligands have been synthesized and characterized in detail. The 3,6-di-tert-butyl-o-benzoquinone (1) and 4,6-di-tert-butyl-N-aryl-substituted o-iminobenzoquinones (2-5) (aryl is 2,6-dimethylphenyl in 2, 2-methyl-6-ethylphenyl in 3, 2,6-diethylphenyl in 4, and 2,6-diisopropylphenyl in 5) were used to obtain the molecular complexes with metal 12 group halides as well as with indium(III) iodide. The molecular structures of five complexes, bearing an unreduced form of redox-active ligand, have been established by single-crystal X-ray analysis. The spectral data, electrochemical measurements, and DFT calculations indicate the significant transformations of the molecular orbitals of 1-5 upon complexation with Lewis acids. The reduction potentials of o-(imino)quinones in complexes with metal halides shift into the anodic region versus uncoordinated ones. The choice of metal halide allows varying the shift magnitude up to 1.7 V in 2·CdI2. The change of the oxidizing ability of the 1-5 upon coordination with Lewis acids enables the oxidation of mercury and ferrocene, infeasible for free ligands.

Square-Planar Heteroleptic Complexes of α-Diimine-NiII-Catecholate Type: Intramolecular Ligand-to-Ligand Charge Transfer.

Two heteroleptic NiII complexes combined the redox-active catecholate and 2,2'- bipyridine ligand platforms were synthesized to observe a photoinduced intramolecular ligand-to-ligand charge transfer (LL'CT, HOMOcatecholate → LUMOα-diimine). A molecular design of compound [NiII(3,6-Cat)(bipy)]∙CH3CN (1) on the base of bulky 3,6-di-tert-butyl-o-benzoquinone (3,6-DTBQ) was an annelation of the ligand with an electron donor glycol fragment, producing derivative [NiII(3,6-Catgly)(bipy)]∙CH2Cl2 (2), in order to influence the energy of LL'CT transition. A substantial longwave shift of the absorption peak was observed in the UV-Vis-NIR spectra of 2 compared with those in 1. In addition, the studied NiII derivatives demonstrated a pronounced negative solvatochromism, which was established using a broad set of solvents. The molecular geometry of both compounds can be ascribed as an insignificantly distorted square-planar type, and the π-π intermolecular stacking of the neighboring α-diimines is realized in a crystal packing. There is a lamellar crystal structure for complex 1, whereas the perpendicular T-motifs with the inter-stacks attractive π-π interactions form the packing of complex 2. The redox-active nature of ligand systems was clearly shown through the electrochemical study: a quasi-reversible one-electron reduction of 2,2'-bipyridine and two reversible successive one-electron oxidative conversations ("catecholate dianion-o-benzosemiquinonato radical anion-neutral o-benzoquinone") were detected.

Heteroleptic LaIII Anilate/Dicarboxylate Based Neutral 3D-Coordination Polymers.

Three new 3D metal-organic frameworks of lanthanum based on mixed anionic ligands, [(La2(pQ)2(BDC)4)·4DMF]n, [(La2(pQ)2(DHBDC)4)·4DMF]n, [(La2(CA)2(BDC)4)·4DMF]n (pQ-dianion of 2,5-dihydroxy-3,6-di-tert-butyl-para-quinone, CA-dianion of chloranilic acid, BDC-1,4-benzenedicarboxylate, DHBDC-2,5-dihydroxy-1,4-benzenedicarboxylate and DMF-N,N'-dimethylformamide), were synthesized using solvothermal methodology. Coordination polymers demonstrate the rare xah or 4,6T187 topology of a 3D framework. The homoleptic 2D-coordination polymer [(La2(pQ)3)·4DMF]n was obtained as a by-product in the course of synthetic procedure optimization. The thermal stability, spectral characteristics and porosity of coordination polymers were investigated.

The (Dioximate)NiII/I2 System: Ligand Oxidation and Binding Modes of Triiodide Species.

Reinvestigation of (o-benzoquinonedioximate)2Ni/I2 systems demonstrated that the reaction itself and also the crystallization conditions dramatically affect the identity of generated species. Crystallization (CHCl3, 20-25 °C) of the nickel(II) dioximate complex [Ni(bqoxH)2] (bqoxH2 = o-benzoquinonedioxime) with I2 in the 1:(1-10) molar ratios of the reactants led to several (o-benzoquinonedioximate)2Ni derivatives and/or iodine adducts [Ni(I)(bqoxH)(bqoxH2)]·3/2I2, [Ni(I3)(bqoxH)(bqoxH2)]·[Ni(bqoxH)2], and [Ni(I3)(bqox•-)(bqoxH2)]·I2; the latter one, featuring the anion-radical bqox•- ligand, is derived from the formal (-2H+/1e-)-oxidation of bqoxH2. In these three adducts, various types of noncovalent interactions were identified experimentally and their existence was supported theoretically. The [Ni(I3)(bqox•-)(bqoxH2)]·I2 adduct exhibits simultaneous semicoordination and coordination patterns of the triiodide ligand; this is the first recognition of the semicoordination of any polyiodide ligand to a metal center. The semicoordination noncovalent contact Ni···I3 (3.7011(10) Å) is substantially longer that the Ni-I3 coordination bond (2.8476(9) Å), and the difference in energies between these two types of linkages is 8-12 kcal/mol.

Tetrahedral nickel(ii) and cobalt(ii) bis-o-iminobenzosemiquinonates.

The new bis-o-iminobenzosemiquinonate nickel and cobalt complexes (imSQt-Bu)2M (M = Ni (1), Co (2)), where imSQ is a radical anion of 4,6-di-tert-butyl-N-(tert-butyl)-o-iminobenzoquinone, were synthesized and characterized in detail. The molecular structures of 1 and 2 have been established by single-crystal X-ray analysis. The metal atoms in 1 and 2 have a distorted tetrahedral environment, and the dihedral angles between the planes of two radical imSQ ligands are approximately 80° in both complexes. According to the structural and spectroscopy data along with magnetic susceptibility measurements the electronic structure of the complexes should be interpreted definitely as a high spin metal center NiII (d8, S = 1) in 1 and CoII (d7, S = 3/2) in 2 bonded with two o-iminobenzosemiquinonate radicals (Srad = 1/2). The strong antiferromagnetic metal-ligand spin interactions in both complexes lead to the observed St = 0 and St = 1/2 ground states in 1 and 2, respectively. The computational DFT UB3LYP/6-311++G(d,p) studies performed on 1 and 2 are in good agreement with experimental data. Complexes 1 and 2 have similar electrochemical properties. The electrochemical reduction of the complexes includes two quasi-reversible one-electron-transfer waves in the cathodic region corresponding to the formation of the anions [M(AP)2]2- and [(imSQ)M(AP)]1- (AP - dianion of 4,6-di-tert-butyl-N-(tert-butyl)-o-iminobenzoquinone), while in the anodic region only one quasi-reversible redox process was registered. All redox processes are shown to be ligand-based.

Cobalt complexes with hemilabile o-iminobenzoquinonate ligands: a novel example of redox-induced electron transfer.

The tetracoordinated square-planar CoIII complex (imSQC(O)Ph)CoIII(APC(O)Ph) (1) bearing a radical anion and the closed-shell o-amidophenolate forms of the functionalized o-aminophenol H2LC(O)Ph were synthesized. The intermediate spin state (SCo = 1) CoIII center was found for compound 1. The cyclic voltammogram of derivative 1 contains two oxidative processes and one reductive redox process as well as an additional multi-electron wave at high negative potentials above -2 V, which can involve both the ligand and metal center. One-electron oxidation of 1 by silver triflate produces the [(imSQC(O)Ph)CoII(imQC(O)Ph)]OTf·2toluene (2) derivative with the trigonal prismatic coordination environment of the metal arising from the additional coordination of -C(O)Ph hemilabile groups. This is a first example of a trigonal prismatic coordination polyhedron in cobalt-based complexes featuring o-iminobenzoquinone ligands. The trigonal prismatic geometry achieved by the unique flexibility of the ligand allows metal-to-ligand redox-induced electron transfer (RIET). Chemical oxidation of complex 1 promotes the reduction of CoIII to CoII in compound 2 due to the redox-active nature of o-iminobenzoquinonate ligands. Remarkably, this is the first example of RIET in cobalt-based derivatives with this type of ligand. The oxidative states of the ligands and cobalt ion in both complexes were unequivocally established according to the X-ray data collection by using the utility of "metric oxidation state" (MOS). The spin states of the metal centers were unambiguously determined by density functional theory. The strong antiferromagnetic exchange via metal-ligand interactions is dominant in compounds 1 and 2, giving the doublet (S = 1/2) and triplet (S = 1) ground spin state, respectively.

The new C-C bond formation in the reaction of o-amidophenolate indium(III) complex with alkyl iodides.

The reaction of bis(4,6-di-tert-butyl-N-(2,6-di-iso-propylphenyl)-o-amidophenolato)indium(III) anion with alkyl iodides is reported. This process includes oxidative addition of two RI (R = Me, Et) molecules to the non-transition metal complex and results in an alkyl transfer to ring carbon atoms with the formation of two new C-C bonds. The interaction proceeds at mild conditions and gives new indium(III) derivatives containing iminocyclohexa-1,4-dienolate type ligands.

Tin(IV) and lead(IV) complexes with a tetradentate redox-active ligand.

The coordination chemistry of a tetradentate redox-active ligand, glyoxal-bis(2-hydroxy-3,5-di-tert-butylanil) (H(2)L), was investigated with the diorganotin(IV) and diphenyllead(IV) moieties. Complexes R(2)SnL (R = Me (1), Et (2), (t)Bu (3), Ph (4)) and Ph(2)PbL (5) have been prepared and characterized. The molecular structures of compounds 1, 3, and 5 have been determined by single crystal X-ray diffraction. The diamagnetic octahedral complexes bear a tetradentate O,N,N,O redox-active ligand with a nearly planar core. Complexes 1-5 demonstrate solvatochromism in solution. The CV of complexes 1-5 reveals four one-electron redox processes. The spin density distribution in the chemically generated cations and anions of 1-5 was studied by X-band EPR spectroscopy. The experimental data agree well with the results of DFT calculations of electronic structures for 1, its pyridine adduct 1·Py, cation 1(+) and anion 1(-).

Synthesis and molecular structure of indium complexes based on 3,6-di-tert-butyl-o-benzoquinone. Looking for indium(I) o-semiquinolate.

The interaction of 3,6-di-tert-butyl-o-benzoquinone (3,6-Q) with indium in toluene leads to the tris-o-semiquinolate derivative (3,6-SQ)(3)In (3,6-SQ - radical-anion of 3,6-Q). According to single-crystal X-ray diffraction analysis, this complex has a trigonal prismatic structure. Magnetic measurements revealed that the exchange interactions between odd electrons of the paramagnetic ligands in (3,6-SQ)(3)In are antiferromagnetic in character. The treatment of (3,6-SQ)(3)In with 2,2'-dipyridyl (Dipy) causes the displacement of one o-quinone ligand and the formation of the (3,6-SQ)In(Dipy)(3,6-Cat) (3,6-Cat - dianion of 3,6-Q) derivative containing mixed charged o-quinoid ligands. The reaction of InI with (3,6-SQ)K in THF solution is accompanied by a redox process and the potassium-indium(iii) catecholate derivative was obtained as a result. The oxidation of InI with 3,6-Q in THF produces the dimeric In(iii) iodo-catecholate complex [(3,6-Cat)(2)In·2THF]InI(2). The same derivative can be synthesized by the interaction of indium metal with a mixture of I(2) and 3,6-Q.

Oxidation by oxygen and sulfur of Tin(IV) derivatives containing a redox-active o-amidophenolate ligand.

Oxidation of tin(IV) o-amidophenolate complexes [Sn(ap)Ph(2)] (1) and [Sn(ap)Et(2)(thf)] (2) (ap=dianion of 4,6-di-tert-butyl-N-(2,6-diisopropylphenyl)-o-iminobenzoquinone (ImQ)) with molecular oxygen and sulfur in toluene solutions was investigated. The reaction of oxygen with 1 at room temperature forms a paramagnetic derivative [Sn(isq)(2)Ph(2)] (3) (isq=radical anion of ImQ) and diphenyltin(IV) oxide [{Ph(2)SnO}(n)]. Interaction of 1 with sulfur gives another monophenyl-substituted paramagnetic tin(IV) complex, [Sn(ap)(isq)Ph] (4), and the sulfide, [Ph(3)Sn](2)S. The oxidation of 2 with oxygen and with sulfur proceeds through the derivative [Sn(isq)(2)Et(2)] (7), which undergoes alkyl elimination to give two new tin(IV) compounds, [Sn(ap)(isq)Et] (5) and [Sn(ap)(EtImQ)Et] (6) (EtImQ=2,4-di-tert-butyl-6-(2,6-diisopropylphenylimino)-3-ethylcyclohexa-1,4-dienolate ligand), respectively, along with the corresponding alkyltin(IV) oxide and sulfide. Complexes 3-5 and 7 were studied by EPR spectroscopy. The structures of 3, 4 and 6 were investigated by X-ray analysis.