RESUMEN
Prostheses or implantable medical devices (IMDs) are parts made of natural or artificial materials intended to replace a body structure and therefore must be well tolerated by living tissues. The types of IMDs currently available and usable are very varied and capable of replacing almost any human organ. A high but imprecise percentage of Spaniards are carriers of one or more IMDs to which they often owe their quality of life or survival. IMDs are constructed with different types of materials that are often combined in the same prosthesis. These materials must combine harmlessness to human tissues with high wear resistance. Their durability depends on many factors both on the host and the type of prosthesis, but the vast majority last for more than 10-15 years or remain in function for the lifetime of the patient. The most frequently implanted IMDs are placed in the heart or great vessels, joints, dental arches or breast and their most frequent complications are classified as non-infectious, particularly loosening or intolerance, and infectious. Complications, when they occur, lead to a significant increase in morbidity, their repair or replacement multiplies the health care cost and, on occasions, can cause the death of the patient. The fight against IMD complications is currently focused on the design of new materials that are more resistant to wear and infection and the use of antimicrobial substances that are released from these materials. Their production requires multidisciplinary technical teams, but also a willingness on the part of industry and health authorities that is not often found in Spain or in most European nations. Scientific production on prostheses and IMD in Spain is estimated to be less than 2% of the world total, and probably below what corresponds to our level of socio-economic development. The future of IMDs involves, among other factors, examining the potential role of Artificial Intelligence in their design, knowledge of tissue regeneration, greater efficiency in preventing infections and taking alternative treatments beyond antimicrobials, such as phage therapy. For these and other reasons, the Ramón Areces Foundation convened a series of experts in different fields related to prostheses and IMDs who answered and discussed a series of questions previously formulated by the Scientific Council. The following lines are the written testimony of these questions and the answers to them.
RESUMEN
Although the impact of composites based on Ti-doped calcium phosphate glasses is low compared with that of bioglass, they have been already shown to possess great potential for bone tissue engineering. Composites made of polylactic acid (PLA) and a microparticle glass of 5TiO2-44.5CaO-44.5P2O5-6Na2O (G5) molar ratio have already demonstrated in situ osteo- and angiogenesis-triggering abilities. As many of the hybrid materials currently developed usually promote osteogenesis but still lack the ability to induce vascularization, a G5/PLA combination is a cost-effective option for obtaining new instructive scaffolds. In this study, nanostructured PLA-ORMOGLASS (organically modified glass) fibers were produced by electrospinning, in order to fabricate extra-cellular matrix (ECM)-like substrates that simultaneously promote bone formation and vascularization. Physical-chemical and surface characterization and tensile tests demonstrated that the obtained scaffolds exhibited homogeneous morphology, higher hydrophilicity and enhanced mechanical properties than pure PLA. In vitro assays with rat mesenchymal stem cells (rMSCs) and rat endothelial progenitor cells (rEPCs) also showed that rMSCs attached and proliferated on the materials influenced by the calcium content in the environment. In vivo assays showed that hybrid composite PLA-ORMOGLASS fibers were able to promote the formation of blood vessels. Thus, these novel fibers are a valid option for the design of functional materials for tissue engineering applications.
RESUMEN
Hybrid materials are being extensively investigated with the aim of mimicking the ECM microenvironment to develop effective solutions for bone tissue engineering. However, the common drawbacks of a hybrid material are the lack of interactions between the scaffold's constituents and the masking of its bioactive phase. Conventional hybrids often degrade in a non-homogeneous manner and the biological response is far from optimal. We have developed a novel material with strong interactions between constituents. The bioactive phase is directly exposed on its surface mimicking the structure of the ECM of bone. Here, polylactic acid electrospun fibers have been successfully and reproducibly coated with a bioactive organically modified glass (ormoglass, Si-Ca-P2 system) covalently. In comparison with the pure polymeric mats, the fibers obtained showed improved hydrophilicity and mechanical properties, bioactive ion release, exhibited a nanoroughness and enabled good cell adhesion and spreading after just one day of culture (rMSCs and rEPCs). The fibers were coated with different ormoglass compositions to tailor their surface properties (roughness, stiffness, and morphology) by modifying the experimental parameters. Knowing that cells modulate their behavior according to the exposed physical and chemical signals, the development of this instructive material is a valuable advance in the design of functional regenerative biomaterials.
Asunto(s)
Materiales Biocompatibles/química , Vidrio/química , Ácido Láctico/química , Nanofibras/química , Polímeros/química , Regeneración Ósea , Calcio , Poliésteres , Propiedades de Superficie , Ingeniería de Tejidos , Andamios del Tejido/químicaRESUMEN
Osteoporosis is a worldwide disease with a very high prevalence in humans older than 50. The main clinical consequences are bone fractures, which often lead to patient disability or even death. A number of commercial biomaterials are currently used to treat osteoporotic bone fractures, but most of these have not been specifically designed for that purpose. Many drug- or cell-loaded biomaterials have been proposed in research laboratories, but very few have received approval for commercial use. In order to analyze this scenario and propose alternatives to overcome it, the Spanish and European Network of Excellence for the Prevention and Treatment of Osteoporotic Fractures, "Ageing", was created. This network integrates three communities, e.g. clinicians, materials scientists and industrial advisors, tackling the same problem from three different points of view. Keeping in mind the premise "living longer, living better", this commentary is the result of the thoughts, proposals and conclusions obtained after one year working in the framework of this network.
Asunto(s)
Materiales Biocompatibles/uso terapéutico , Osteoporosis/prevención & control , Osteoporosis/terapia , Industria Farmacéutica , Humanos , Ensayo de MaterialesRESUMEN
An alternative approach to bone repair for less invasive surgical techniques, involves the development of biomaterials directly injectable into the injury sites and able to replicate a spatially organized platform with features of bone tissue. Here, the preparation and characterization of an innovative injectable bone analogue made of calcium deficient hydroxyapatite and foamed gelatin is presented. The biopolymer features and the cement self-setting reaction were investigated by rheological analysis. The porous architecture, the evolution of surface morphology and the grains dimension were analyzed with electron microscopy (SEM/ESEM/TEM). The physico-chemical properties were characterized by X-ray diffraction and FTIR analysis. Moreover, an injection test was carried out to prove the positive effect of gelatin on the flow ensuing that cement is fully injectable. The cement mechanical properties are adequate to function as temporary substrate for bone tissue regeneration. Furthermore, MG63 cells and bone marrow-derived human mesenchymal stem cells (hMSCs) were able to migrate and proliferate inside the pores, and hMSCs differentiated to the osteoblastic phenotype. The results are paving the way for an injectable bone substitute with properties that mimic natural bone tissue allowing the successful use as bone filler for craniofacial and orthopedic reconstructions in regenerative medicine.
Asunto(s)
Sustitutos de Huesos , Calcio/química , Durapatita/química , Gelatina/química , Fosfatasa Alcalina/análisis , Biomarcadores/análisis , Diferenciación Celular , Línea Celular , ADN/análisis , Humanos , Microscopía Electrónica/métodos , Reacción en Cadena de la Polimerasa de Transcriptasa Inversa , Espectroscopía Infrarroja por Transformada de Fourier , Difracción de Rayos XRESUMEN
The present study reports a novel approach for the design and fabrication of polylactic acid (PLA) microparticle-based scaffolds with microstructural properties suitable for bone and cartilage regeneration. Macroporous PLA scaffolds with controlled shape were fabricated by means of a semicontinuous process involving (1) microfluidic emulsification of a PLA/ethyl lactate solution (5% w/v) in a span 80/paraffin oil solution (3% v/v) followed by (2) particles coagulation/assembly in an acetone/water solution for the development of a continuous matrix. Porous scaffolds prepared from particles with monomodal or bimodal size distribution, overall porosity ranges from 93 to 96%, interparticles porosity from 41 to 54%, and static compression moduli from 0.3 to 1.4 MPa were manufactured by means of flow rate modulation of of the continuous phase during emulsion. The biological response of the scaffolds was assessed in vitro by using bone marrow-derived rat mesenchymal stem cells (MSCs). The results demonstrated the ability of the scaffolds to support the extensive and uniform three-dimensional adhesion, colonization, and proliferation of MSCs within the entire construct.
Asunto(s)
Células de la Médula Ósea/citología , Células de la Médula Ósea/metabolismo , Ácido Láctico/química , Células Madre Mesenquimatosas/citología , Células Madre Mesenquimatosas/metabolismo , Técnicas Analíticas Microfluídicas , Polímeros/química , Andamios del Tejido/química , Animales , Células Cultivadas , Emulsiones , Ácido Láctico/síntesis química , Poliésteres , Polímeros/síntesis química , Porosidad , Ratas , Ratas Endogámicas Lew , Solventes/químicaRESUMEN
Fabrication of new biodegradable scaffolds that guide and stimulate tissue regeneration is still a major issue in tissue engineering approaches. Scaffolds that possess adequate biodegradability, pore size, interconnectivity, bioactivity and mechanical properties in accordance with the injured tissue are required. This work aimed to develop and characterize three-dimensional (3-D) scaffolds that fulfill the aforementioned requirements. For this, a nozzle-based rapid prototyping system was used to combine polylactic acid and a bioactive CaP glass to fabricate 3-D biodegradable scaffolds with two patterns (orthogonal and displaced double layer). Scanning electron microscopy and micro-computer tomography showed that 3-D scaffolds had completely interconnected porosity, uniform distribution of the glass particles, and a controlled and repetitive architecture. Surface properties were also assessed, showing that the incorporation of glass particles increased both the roughness and the hydrophilicity of the scaffolds. Mechanical tests indicated that compression strength is dependent on the scaffold geometry and the presence of glass. Preliminary cell response was studied with primary mesenchymal stem cells (MSC) and revealed that CaP glass improved cell adhesion. Overall, the results showed the suitability of the technique/materials combination to develop 3-D porous scaffolds and their initial biocompatibility, both being valuable characteristics for tissue engineering applications.
Asunto(s)
Ácido Láctico/farmacología , Polímeros/farmacología , Impresión/métodos , Ingeniería de Tejidos/métodos , Andamios del Tejido/química , Animales , Adhesión Celular/efectos de los fármacos , Fuerza Compresiva/efectos de los fármacos , Procesamiento de Imagen Asistido por Computador , Células Madre Mesenquimatosas/citología , Células Madre Mesenquimatosas/efectos de los fármacos , Microscopía Electrónica de Rastreo , Poliésteres , Polietilenglicoles/farmacología , Porosidad , Ratas , Temperatura , Microtomografía por Rayos XRESUMEN
Alpha-tricalcium-phosphate-based bone cements hydrolyze and set, producing calcium-deficient hydroxyapatite. They can result in an effective solution for bone defect reconstruction due to their biocompatibility, bioactivity and adaptation to shape and bone defect sizes, together with an excellent contact between bone and graft. Moreover, the integration of hydrogel phase based on poly(vinyl alcohol) (PVA) to H-cem-composed of α-tricalcium phosphate (98% wt) and hydroxyapatite (2% wt)-allows improving the mechanical and biological properties of the cement. The aim of this work was to evaluate the influence of the PVA on relevant properties for the final use of the injectable bone substitute, such as setting, hardening, injectability and in vivo behaviour. It was shown that by using PVA it is possible to modulate the setting and hardening properties: large increase in injectability time (1 h) in relation with the plain cement (few minutes) was achieved. Moreover, in vivo tests confirmed the ability of the composite to enhance bone healing in trabecular tissue. Histological results from critical size defects produced in rabbit distal femoral condyles showed after 12 weeks implantation a greater deposition of new tissue on bone-composite interfaces in comparison to bone-cement interfaces. The quality of bone growth was confirmed through histomorphometric and microhardness analysis. Bone formation in the composite implantation sites was significantly higher than in H-cem implants at both times of evaluation.
Asunto(s)
Cementos para Huesos/uso terapéutico , Regeneración Ósea/fisiología , Fosfatos de Calcio/administración & dosificación , Fracturas del Fémur/fisiopatología , Fracturas del Fémur/terapia , Curación de Fractura/fisiología , Animales , Inyecciones , Conejos , Resultado del TratamientoRESUMEN
Biomaterial surface properties, via alterations in the adsorbed protein layer, and the presence of specific functional groups can influence integrin binding specificity, thereby modulating cell adhesion and differentiation processes. The adsorption of fibronectin, a protein directly involved in osteoblast adhesion to the extracellular matrix, has been related to different physical and chemical properties of biomaterial surfaces. This study used blasting particles of different sizes and chemical compositions to evaluate the response of MG63 osteoblast-like cells on smooth and blasted titanium surfaces, with and without fibronectin coatings, by means of real-time reverse transcription-polymerase chain reaction (qRT-PCR) assays. This response included (a) expression of the α(5), α(v) and α(3) integrin subunits, which can bind to fibronectin through the RGD binding site, and (b) expression of alkaline phosphatase (ALP) and osteocalcin (OC) as cell-differentiation markers. ALP activity and synthesis of OC were also tested. Cells on SiC-blasted Ti surfaces expressed higher amounts of the α(5) mRNA gene than cells on Al(2)O(3)-blasted Ti surfaces. This may be related to the fact that SiC-blasted surfaces adsorbed higher amounts of fibronectin due to their higher surface free energy and therefore provided a higher number of specific cell-binding sites. Fn-coated Ti surfaces decreased α(5) mRNA gene expression, by favoring the formation of other integrins involved in adhesion over α(5)ß(1). The changes in α(5) mRNA expression induced by the presence of fibronectin coatings may moreover influence the osteoblast differentiation pathway, as fibronectin coatings on Ti surfaces also decreased both ALP mRNA expression and ALP activity after 14 and 21 days of cell culture.
Asunto(s)
Materiales Biocompatibles/química , Fibronectinas/metabolismo , Titanio/química , Fosfatasa Alcalina/metabolismo , Sitios de Unión , Adhesión Celular , Diferenciación Celular , Línea Celular , Fibronectinas/química , Humanos , Integrina alfa3beta1/metabolismo , Integrina alfaVbeta3/metabolismo , Osteoblastos/citología , Osteoblastos/metabolismo , Osteocalcina/metabolismo , Fenotipo , Reacción en Cadena de la Polimerasa de Transcriptasa Inversa/métodosRESUMEN
Despite their known osteoconductivity, clinical use of calcium phosphate cements is limited both by their relatively slow rate of resorption and by rheological properties incompatible with injectability. Bone in-growth and material resorption have been improved by the development of porous calcium phosphate cements. However, injectable formulations have so far only been obtained through the addition of relatively toxic surfactants. The present work describes the response of osteoblasts to a novel injectable foamed bone cement based on a composite formulation including the bioactive foaming agents soybean and gelatine. The foaming properties of both defatted soybean and gelatine gels were exploited to develop a self-hardening soy/gelatine/hydroxyapatite composite foam able to retain porosity upon injection. After setting, the foamed paste produced a calcium-deficient hydroxyapatite scaffold, showing good injectability and cohesion as well as interconnected porosity after injection. The intrinsic bioactivity of soybean and gelatine was shown to favour osteoblast adhesion and growth. These findings suggest that injectable, porous and bioactive calcium phosphate cements can be produced for bone regeneration through minimally invasive surgery.
Asunto(s)
Materiales Biocompatibles/farmacología , Durapatita/farmacología , Gelatina/farmacología , Glycine max/química , Ensayo de Materiales/métodos , Animales , Bovinos , Recuento de Células , Muerte Celular/efectos de los fármacos , Línea Celular Tumoral , Forma de la Célula/efectos de los fármacos , Supervivencia Celular/efectos de los fármacos , Humanos , Inyecciones , Microscopía Electrónica de Rastreo , Porosidad/efectos de los fármacos , Difracción de Rayos XRESUMEN
A promising approach to bone tissue engineering lies in the use of perfusion bioreactors where cells are seeded and cultured on scaffolds under conditions of enhanced nutrient supply and removal of metabolic products. Fluid flow alterations can stimulate cell activity, making the engineering of tissue more efficient. Most bioreactor systems are used to culture cells on thin scaffold discs. In clinical use, however, bone substitutes of large dimensions are needed. In this study, MG63 osteoblast-like cells were seeded on large porous PLA/glass scaffolds with a custom developed perfusion bioreactor system. Cells were seeded by oscillating perfusion of cell suspension through the scaffolds. Applicable perfusion parameters for successful cell seeding were determined by varying fluid flow velocity and perfusion cycle number. After perfusion, cell seeding, the cell distribution, and cell seeding efficiency were determined. A fluid flow velocity of 5 mm/s had to be exceeded to achieve a uniform cell distribution throughout the scaffold interior. Cell seeding efficiencies of up to 50% were achieved. Results suggested that perfusion cycle number influenced cell seeding efficiency rather than fluid flow velocities. The cell seeding conducted is a promising basis for further long term cell culture studies in large porous scaffolds.
Asunto(s)
Reactores Biológicos , Fosfatos de Calcio/farmacología , Técnicas de Cultivo de Célula/instrumentación , Ácido Láctico/farmacología , Osteoblastos/citología , Perfusión/métodos , Polímeros/farmacología , Andamios del Tejido/química , Naranja de Acridina/metabolismo , Línea Celular , Supervivencia Celular/efectos de los fármacos , Etidio/metabolismo , Humanos , Osteoblastos/efectos de los fármacos , Poliésteres , Porosidad/efectos de los fármacos , Reología/efectos de los fármacos , Coloración y Etiquetado , Estrés Mecánico , Factores de TiempoRESUMEN
Tissue engineering aims to regenerate tissues and organs by using cell and biomaterial-based approaches. One of the current challenges in the field is to promote proper vascularization in the implant to prevent cell death and promote host integration. Bone marrow endothelial progenitor cells (BM-EPCs) and mesenchymal stem cells (MSCs) are bone marrow resident stem cells widely employed for proangiogenic applications. In vivo, they are likely to interact frequently both in the bone marrow and at sites of injury. In this study, the physical and biochemical interactions between BM-EPCs and MSCs in an in vitro co-culture system were investigated to further clarify their roles in vascularization. BM-EPC/MSC co-cultures established close cell-cell contacts soon after seeding and self-assembled to form elongated structures at 3days. Besides direct contact, cells also exhibited vesicle transport phenomena. When co-cultured in Matrigel, tube formation was greatly enhanced even in serum-starved, growth factor free medium. Both MSCs and BM-EPCs contributed to these tubes. However, cell proliferation was greatly reduced in co-culture and morphological differences were observed. Gene expression and cluster analysis for wide panel of angiogenesis-related transcripts demonstrated up-regulation of angiogenic markers but down-regulation of many other cytokines. These data suggest that cross-talk occurs in between BM-EPCs and MSCs through paracrine and direct cell contact mechanisms leading to modulation of the angiogenic response.
Asunto(s)
Células de la Médula Ósea/fisiología , Comunicación Celular , Endotelio Vascular/fisiología , Células Madre Mesenquimatosas/fisiología , Neovascularización Fisiológica , Ingeniería de Tejidos , Células de la Médula Ósea/citología , Técnicas de Cocultivo , Endotelio Vascular/citología , Humanos , Células Madre Mesenquimatosas/citología , Vesículas TransportadorasRESUMEN
Considering the structural role of type IV collagen (Col IV) in the assembly of the basement membrane (BM) and the perspective of mimicking its organization for vascular tissue engineering purposes, we studied the adsorption pattern of this protein on model hydrophilic (clean glass) and hydrophobic trichloro(octadecyl)silane (ODS) surfaces known to strongly affect the behavior of other matrix proteins. The amount of fluorescently labeled Col IV was quantified showing saturation of the surface for concentration of the adsorbing solution of about 50microg/ml, but with approximately twice more adsorbed protein on ODS. AFM studies revealed a fine - nearly single molecular size - network arrangement of Col IV on hydrophilic glass, which turns into a prominent and growing polygonal network consisting of molecular aggregates on hydrophobic ODS. The protein layer forms within minutes in a concentration-dependent manner. We further found that human umbilical vein endothelial cells (HUVEC) attach less efficiently to the aggregated Col IV (on ODS), as judged by the significantly altered cell spreading, focal adhesions formation and the development of actin cytoskeleton. Conversely, the immunofluorescence studies for integrins revealed that the fine Col IV network formed on hydrophilic substrata is better recognized by the cells via both alpha1 and alpha2 heterodimers which support cellular interaction, apart from these on hydrophobic ODS where almost no clustering of integrins was observed.
Asunto(s)
Comunicación Celular/efectos de los fármacos , Colágeno Tipo IV/metabolismo , Células Endoteliales/fisiología , Ingeniería de Tejidos/métodos , Vasos Sanguíneos/citología , Adhesión Celular , Células Endoteliales/citología , Endotelio Vascular/citología , Vidrio , Humanos , Interacciones Hidrofóbicas e Hidrofílicas , Unión Proteica , Silanos/farmacología , Andamios del TejidoRESUMEN
In this work a calcium phosphate (CPC)/polymer blend was developed with the advantage of being moldable and capable of in situ setting to form calcium deficient hydroxyapatite under physiological conditions in an aqueous environment at body temperature. The CPC paste consists in a mix of R cement, glycerol as a liquid phase carrier and a biodegradable hydrogel such as Polyvinyl alcohol, which acts as a binder. Microstructure and mechanical analysis shows that the CPC blend can be used as an injectable implant for low loaded applications and fast adsorption requirements. The storage for commercial distribution was also evaluated and the properties of the materials obtained do not significantly change during storage at -18 degrees C.
Asunto(s)
Cementos para Huesos/química , Fosfatos de Calcio/química , Trasplante Óseo , Formas de Dosificación , Durapatita/química , Hidrogel de Polietilenoglicol-Dimetacrilato/química , Inyecciones , Polímeros/químicaRESUMEN
Angiogenesis is a complex process regulated by many cell types and a large variety of biochemical signals such as growth factors, transcription factors, oxygen and nutrient diffusion among others. In the present study, we found out that Flk-1(+) CD34(+) progenitor cells (bone marrow resident cells with an important role in angiogenesis) were responsive to changes in extracellular calcium concentration through a membrane bound, G-protein-coupled receptor sensitive to calcium ions related to the calcium-sensing receptor (CaSR). Calcium was able to induce progenitor cell migration in Boyden chamber experiments and tubulogenesis in Matrigel assays. Addition of anti-CaSR antibodies completely blocked the effect, while CaSR agonist Mg(2+) produced a similar response to that of calcium. Real time RT-PCR for a wide array of angiogenesis-related genes showed increased expression of endothelial markers and signaling pathways involved in angiogenesis. These results suggest calcium could be a physiological modulator of the bone marrow progenitor cell-mediated angiogenic response.
Asunto(s)
Células de la Médula Ósea/citología , Calcio/metabolismo , Quimiotaxis , Neovascularización Fisiológica , Receptores Sensibles al Calcio/metabolismo , Células Madre/citología , Animales , Antígenos CD34/metabolismo , Calcio/farmacología , Señalización del Calcio , Diferenciación Celular , Proliferación Celular , Células Cultivadas , Endotelio Vascular/citología , Endotelio Vascular/metabolismo , Magnesio/farmacología , Ratas , Ratas Endogámicas Lew , Receptores Sensibles al Calcio/agonistas , Reacción en Cadena de la Polimerasa de Transcriptasa Inversa , Receptor 2 de Factores de Crecimiento Endotelial Vascular/metabolismoRESUMEN
We investigated the early events of bone matrix formation, and specifically the role of fibronectin (FN) in the initial osteoblast interaction and the subsequent organization of a provisional FN matrix on different rough titanium (Ti) surfaces. Fluorescein isothiocyanate-labelled FN was preadsorbed on these surfaces and studied for its three-dimensional (3-D) organization by confocal microscopy, while its amount was quantified after NaOH extraction. An irregular pattern of adsorption with a higher amount of protein on topographic peaks than on valleys was observed and attributed to the physicochemical heterogeneity of the rough Ti surfaces. MG63 osteoblast-like cells were further cultured on FN-preadsorbed Ti surfaces and an improved initial cellular interaction was observed with increasing roughness. 3-D reconstruction of the immunofluorescence images after 4 days of incubation revealed that osteoblasts deposit FN fibrils in a specific facet-like pattern that is organized within the secreted total matrix overlying the top of the samples. The thickness of this FN layer increased when the roughness of the underlying topography was increased, but not by more than half of the total maximum peak-to-valley distance, as demonstrated with images showing simultaneous reconstruction of fluorescence and topography after 7 days of cell culture.
Asunto(s)
Materiales Biocompatibles/química , Fibronectinas/química , Osteoblastos/metabolismo , Titanio/química , Adsorción , Adhesión Celular , Línea Celular , Química Física/métodos , Matriz Extracelular/metabolismo , Humanos , Microscopía Fluorescente/métodos , Distribución Normal , Propiedades de Superficie , TemperaturaRESUMEN
The application of minimally invasive surgical techniques in the field of orthopaedic surgery has created a growing need for new injectable synthetic materials that can be used for bone grafting. In this work a novel fully synthetic injectable calcium phosphate foam was developed by mixing alpha-tricalcium phosphate (alpha-TCP) powder with a foamed polysorbate 80 solution. Polysorbate 80 is a non-ionic surfactant approved for parenteral applications. The foam was able to retain the porous structure after injection provided that the foamed paste was injected shortly after mixing (typically 2.5 min), and set through the hydrolysis of alpha-TCP to a calcium-deficient hydroxyapatite, thus producing a hydroxyapatite solid foam in situ. The effect of different processing parameters on the porosity, microstructure, injectability and mechanical properties of the hydroxyapatite foams was analysed, and the ability of the pre-set foam to support osteoblastic-like cell proliferation and differentiation was assessed. Interestingly, the concentration of surfactant needed to obtain the foams was lower than that considered safe in drug formulations for parenteral administration. The possibility of combining bioactivity, injectability, macroporosity and self-setting ability in a single fully synthetic material represents a step forward in the design of new materials for bone regeneration compatible with minimally invasive surgical techniques.
Asunto(s)
Regeneración Ósea/fisiología , Sustitutos de Huesos/administración & dosificación , Sustitutos de Huesos/química , Hidroxiapatitas/administración & dosificación , Hidroxiapatitas/química , Tensoactivos/química , Andamios del Tejido , Línea Celular , Portadores de Fármacos/química , Composición de Medicamentos/métodos , Gases/química , Humanos , Inyecciones , Ensayo de Materiales , Osteoblastos/fisiología , Soluciones/químicaRESUMEN
Substrate topography, independently of substrate chemistry, has been reported to have significant effects on cell behaviour. Based on the use of fabrication techniques developed by the silicon microtechnology industry, numerous studies can now be found in the literature analyzing cell behaviour as to various micro- and nano-features such as lines, wells, holes and more. Most of these works have been found to relate the micro- and nano-sized topographical features with cell orientation, migration, morphology and proliferation. In recent papers, even the influence of substrate nanotopography on cell gene expression and differentiation has been pointed out. However, despite the large number of papers published on this topic, significant general trends in cell behaviour are difficult to establish due to differences in cell type, substrate material, feature aspect-ratio, feature geometry and parameters measured. This paper intends to compile and review the relevant existing information on the behaviour of cells on micro- and nano-structured artificial substrates and analyze possible general behavioural trends.
Asunto(s)
Fenómenos Fisiológicos Celulares , Microtecnología/métodos , Nanotecnología/métodos , Animales , Fibroblastos/citología , Fibroblastos/ultraestructura , Humanos , Células Madre Mesenquimatosas/citología , Células Madre Mesenquimatosas/ultraestructura , Ratones , Microscopía Electrónica de Rastreo , Nanoestructuras , Osteoblastos/citología , Osteoblastos/ultraestructura , Polimetil Metacrilato , Ratas , SilicioRESUMEN
At present, strong requirements in orthopaedics are still to be met, both in bone and joint substitution and in the repair and regeneration of bone defects. In this framework, tremendous advances in the biomaterials field have been made in the last 50 years where materials intended for biomedical purposes have evolved through three different generations, namely first generation (bioinert materials), second generation (bioactive and biodegradable materials) and third generation (materials designed to stimulate specific responses at the molecular level). In this review, the evolution of different metals, ceramics and polymers most commonly used in orthopaedic applications is discussed, as well as the different approaches used to fulfil the challenges faced by this medical field.
Asunto(s)
Materiales Biocompatibles , Ortopedia/métodos , Prótesis e Implantes , HumanosRESUMEN
The use of injectable self-setting calcium phosphate cements or soluble glass granules represent two different strategies for bone regeneration, each with distinct advantages and potential applications. This study compares the in vivo behavior of two calcium phosphate cements and two phosphate glasses with different composition, microstructure and solubility, using autologous bone as a control, in a rabbit model. The implanted materials were alpha-tricalcium phosphate cement (cement H), calcium sodium potassium phosphate cement (cement R), and two phosphate glasses in the P(2)O(5)-CaO-Na(2)O and P(2)O(5)-CaO-Na(2)O-TiO(2) systems. The four materials were osteoconductive, biocompatible and biodegradable. Radiological and histological studies demonstrated correct osteointegration and substitution of the implants by new bone. The reactivity of the different materials, which depends on their solubility, porosity and specific surface area, affected the resorption rate and bone formation mainly during the early stages of implantation, although this effect was weak. Thus, at 4 weeks the degradation was slightly higher in cements than in glasses, especially for cement R. However, after 12 weeks of implantation all materials showed a similar degradation degree and promoted bone neoformation equivalent to that of the control group.