Impact of fermentation temperature and grape solids content on the chemical composition and sensory profiles of Cabernet Sauvignon wines made from flash détente treated must fermented off-skins.

This study investigated the color, phenolic, polysaccharide, volatile and sensory profiles of Cabernet Sauvignon wines made from flash détente (FD) treated musts fermented at different temperatures (16, 24 or 32 °C), with and without suspended grape solids. Low fermentation temperature and low solids content increased the concentration of esters, whereas the opposite conditions increased the concentration of fusel alcohols, polysaccharides and glycerol. Higher fermentation temperatures also increased linalool concentration independent of solids content. Traditional maceration fermentation conditions gave the highest concentration of fusel alcohols and 1-hexanol relative to FD treatments. Pre-fermentation removal of grape solids from FD juice created wines with increased red fruit and confectionery attributes, whereas inclusion of 3.5% grape solids increased dark fruit notes. In comparison, control wines had significantly higher green and savory attributes compared to wines from FD treatments. Research findings demonstrated the potential for FD to be used to create differentiated red wine styles.

The Effects of Temperature and Ethanol on Proanthocyanidin Adsorption to Grape Cell Wall Material in the Presence of Anthocyanins.

The quantitative and qualitative impacts of anthocyanins on proanthocyanidin adsorption to grape-derived cell wall material were investigated in fifteen unique systems of varying temperatures, ethanol concentrations, and proanthocyanidin concentrations. Proanthocyanidin solutions were exposed to cell wall material and monitored for changes in concentration over 24 h. Increases in both temperature and ethanol resulted in a larger retention of proanthocyanidins in solution and typically faster adsorption kinetics. Analysis of the solution after exposure to cell wall revealed a significant reduction in the molecular weight of proanthocyanidins present in solution, suggesting that anthocyanins do not alter a previously described mechanism of preferentially binding large molecular weight molecules. Additionally, a reduction in polymeric pigment abundance was noted in most conditions, suggesting rapid formation of polymeric pigment in the model solution and preferential adsorption of the polymeric pigment to cell wall material. Compared to a previous study of proanthocyanidin adsorption in the absence of anthocyanins, a significantly larger percentage of proanthocyanidin material was lost via adsorption-up to 70% of available material. In a winemaking context, this may suggest a preferential loss of polymeric pigment via adsorption to cap cell wall material compared to non-pigmented proanthocyanidins and free anthocyanins.

Impact of Juice Extraction Method (Flash Détente vs. Conventional Must Heating) and Chemical Treatments on Color Stability of Rubired Juice Concentrates under Accelerated Aging Conditions.

Low color stability of Rubired food and beverage coloring negatively impacts color yield during production and storage while also limiting the use of this type of food colorant in applications where color stability is a key requirement. This study investigated the impact on color stability of using flash détente (FD) for Rubired color extraction in comparison to a conventional must heating (CMH) extraction process, in conjunction with the use of commercial seed tannin, acetaldehyde, or acid to lower the pH. Rubired concentrate color was evaluated under accelerated aging conditions at 50, 60, and 70 °C, over zero, three, six, and nine days for the different treatments. FD concentrate had lower color stability, with a half-life of 203.3 h and activation energy of 59.2 kJ/mol at 50 °C compared to the CMH concentrate with 233.9 h and 65.2 kJ/mol. FD concentrate generated less 5-hydroxymethylfurfural (5-HMF) during accelerated aging regardless of treatment. Acetaldehyde, low pH, and the combination of these two treatments increased red color stability as well as violet and brown color, whereas seed tannin had no effect. Low pH treatments increased 5-HMF formation and browning, which was detrimental to concentrate quality. Although promising in terms of color stabilization, implementation of these treatments will require development of solutions to mitigate the production of 5-HMF.

Heat-Dependent Desorption of Proanthocyanidins from Grape-Derived Cell Wall Material under Variable Ethanol Concentrations in Model Wine Systems.

Desorption of proanthocyanidins (PA) from grape cell wall material (CWM) was investigated in solutions of varying ethanol concentrations and increasing temperature. The results reveal the reversibility of PA-CWM interactions and the role that temperature and ethanol concentration play in the extent of PA desorption. Sequentially raising temperature from 15 to 35 °C resulted in desorption of up to 48% of the initial adsorbed PA. A comparison to a phenolic extraction model showed significant differences between the predicted and actual amount of PA that desorbed from the CWM. This suggests that the initial conditions of temperature and ethanol concentration must be considered when estimating PA extraction in red wine production. Under typical winemaking conditions, a significant amount of PA may be irreversibly adsorbed if exposed to CWM at low temperature (i.e., cold soak). A compositional analysis suggests the selective desorption of large molecular weight PA from CWM under all experimental conditions. Additionally, a preferential desorption of skin-derived PA over seed-derived PA was noted in the absence of ethanol.

Impact of Temperature, Ethanol and Cell Wall Material Composition on Cell Wall-Anthocyanin Interactions.

The effects of temperature and ethanol concentration on the kinetics of anthocyanin adsorption and desorption interactions with five cell wall materials (CWM) of different composition were investigated. Using temperatures of 15 °C and 30 °C and model wine with ethanol concentrations of 0% and 15% (v/v) over 120 min, the adsorption and desorption rates of five anthocyanin-glucosides were recorded in triplicate. Small-scale experiments were conducted using a benchtop incubator to mimic a single berry fermentation. Results indicate that more than 90% of the adsorption occurs within the first 60 min of the addition of anthocyanins to CWM. However, desorption appears to occur much faster, with maximum desorption being reached after 30 min. The extent of both adsorption and desorption was clearly dependent not only on temperature and ethanol concentration but also on the CWM composition.

Impact of cold soak duration on Cabernet Sauvignon fermentation and phenolic composition.

BACKGROUND: Cold soak is a prefermentative maceration technique believed to enhance grape skin extraction. Studies show variable results depending on cold soak and winemaking conditions. To investigate the effect of cold soak more fully, systematic and highly reproducible Cabernet Sauvignon fermentations with increasing cold-soak durations were performed. RESULTS: Phenolic extraction during cold soak and fermentation showed significant differences among all treatments for monitored phenolics at the end of the cold soak. At the end of alcoholic fermentation only gallic acid, (-)-epicatechin, and the flavonols were significant, and only (-)-epicatechin was significant after bottle ageing. Descriptive analysis of the bottled wines showed that the 4- and 7-day treatments were significantly higher in caramelized/vanilla/browned flavor compared to the 1-day treatment and lower levels of bitterness were observed up to 2 days of cold soak. While oligosaccharide content increased with increasing cold-soak duration, differences were not large enough to result in sensory differences. CONCLUSION: While increased cold soak duration led to differences in phenolic extraction during early fermentation, these differences did not last through to the end product. Thus, under the conditions of this study, cold-soak duration had little overall impact on Cabernet Sauvignon wine composition and style. © 2018 Society of Chemical Industry.