Preliminary report: Surgical outcomes following genitoplasty in children with moderate to severe genital atypia.

INTRODUCTION: Prior studies of outcomes following genitoplasty have reported high rates of surgical complications among children with atypical genitalia. Few studies have prospectively assessed outcomes after contemporary surgical approaches. OBJECTIVE: The current study reported the occurrence of early postoperative complications and of cosmetic outcomes (as rated by surgeons and parents) at 12 months following contemporary genitoplasty procedures in children born with atypical genitalia. STUDY DESIGN: This 11-site, prospective study included children aged ≤2 years, with Prader 3-5 or Quigley 3-6 external genitalia, with no prior genitoplasty and non-urogenital malformations at the time of enrollment. Genital appearance was rated on a 4-point Likert scale. Paired t-tests evaluated differences in cosmesis ratings. RESULTS: Out of 27 children, 10 were 46,XY patients with the following diagnoses: gonadal dysgenesis, PAIS or testosterone biosynthetic defect, severe hypospadias and microphallus, who were reared male. Sixteen 46,XX congenital adrenal hyperplasia patients were reared female and one child with sex chromosome mosaicism was reared male. Eleven children had masculinizing genitoplasty for penoscrotal or perineal hypospadias (one-stage, three; two-stage, eight). Among one-stage surgeries, one child had meatal stenosis (minor) and one developed both urinary retention (minor) and urethrocutaneous fistula (major) (Summary Figure). Among two-stage surgeries, three children developed a major complication: penoscrotal fistula, glans dehiscence or urethral dehiscence. Among 16 children who had feminizing genitoplasty, vaginoplasty was performed in all, clitoroplasty in nine, external genitoplasty in 13, urethroplasty in four, perineoplasty in five, and total urogenital sinus mobilization in two. Two children had minor complications: one had a UTI, and one had both a mucosal skin tag and vaginal mucosal polyp. Two additional children developed a major complication: vaginal stenosis. Cosmesis scores revealed sustained improvements from 6 months post-genitoplasty, as previously reported, with all scores reported as good or satisfied. DISCUSSION: In these preliminary data from a multi-site, observational study, parents and surgeons were equally satisfied with the cosmetic outcomes 12 months after genitoplasty. A small number of patients had major complications in both feminizing and masculinizing surgeries; two-stage hypospadias repair had the most major complications. Long-term follow-up of patients at post-puberty will provide a better assessment of outcomes in this population. CONCLUSION: In this cohort of children with moderate to severe atypical genitalia, preliminary data on both surgical and cosmetic outcomes were presented. Findings from this study, and from following these children in long-term studies, will help guide practitioners in their discussions with families about surgical management.

Hydrogel coated mesh decreases tissue reaction resulting from polypropylene mesh implant: implication in hernia repair.

PURPOSE: Use of polypropylene mesh (PPM) in hernia repair is associated with tissue reactivity. We examined, in a rat model, a novel non-biodegradable hydrogel coated PPM which may allow for decreased inflammation and a decreased foreign body reaction. METHODS: Through a dorsal midline incision, a 2 cm × 2 cm section of PPM (either coated or uncoated) was placed on the fascial surface 1.5 cm from the incision on the dorsal wall of Sprague-Dawley rats. At 2 and 12 weeks after placement, the PPM and surrounding tissue were harvested. A board-certified dermatopathologist examined H&E stained slides for fibrosis and foreign body reaction. In addition, tissues were stained for apoptotic cells, oxidative damage, macrophages, fibroblasts, neovascularization and metalloproteases. RESULTS: At 2 and 12 weeks, there was a greater than 95 % decrease in foreign body giant cells in coated PPM samples compared to uncoated; fibrosis was decreased by 50 %. At 2 and 12 weeks, oxidative damage, fibroblast accumulation, apoptosis and macrophages were significantly decreased in coated PPM samples compared to uncoated PPM. CONCLUSION: These results demonstrate that a non-biodegradable hydrogel coating of PPM led to significant reduction in foreign body reaction, oxidative stress and apoptosis compared to uncoated PPM in vivo, and suggest that this coating could be clinically useful in hernia repair.

Laparoscopically assisted ureterocystoplasty.

OBJECTIVE: To assess the efficacy and safety of laparoscopically assisted ureterocystoplasty (LAU) in children. PATIENTS AND METHODS: From 1999 to 2001, five patients (mean age 7 years, range 3.5-13) from four centres underwent LAU with laparoscopic mobilization of the small kidney and upper ureter combined with ureterocystoplasty, with exposure of the bladder through a Pfannenstiel incision. The details and outcomes are reviewed. RESULTS: The LAU was successful in all five patients; there were no complications. A large midline incision was avoided and the LAU carried out through the better tolerated and less painful Pfannenstiel incision. CONCLUSION: LAU is an appealing technique that is safe with the added benefit of a reduced abdominal incision and acceptable operative duration. This represents the first published report of LAU.

Hand-assisted laparoscopic autoaugmentation gastrocystoplasty.

BACKGROUND: Autoaugmentation gastrocystoplasty has been previously performed successfully. This set of experiments was conducted to determine the feasibility of performing autoaugmentation gastrocystoplasty laparoscopically. METHODS: Hand-assisted laparoscopic autoaugmentation gastrocystoplasty was performed on 15 mongrel dogs. The surgery was carried out with two 10-mm trocars and a 6-cm Pfannenstiel incision. The gastric wedge, supplied by the right gastroepiploic artery, was resected with two applications of an endoscopic gastrointestinal anastomosis (GIA) stapler. The pedicle was demucosalized, and the anastomosis to the bladder was completed through the Pfannenstiel incision. RESULTS: All of the dogs were successfully treated laparoscopically and were eating at 48 h. There was no evidence of anastomotic leak dehiscence at the gastric resection staple line. CONCLUSION: Hand-assisted laparoscopic autoaugmentation gastrocystoplasty can be performed successfully in dogs. This operation may offer a superior alternative to standard bladder autoaugmentation procedures in children suffering from congenital bladder disorders.

Concentrated autologous plasma protein: a biochemically neutral solder for tissue welding.

BACKGROUND AND OBJECTIVE: Xenographic or allographic serum protein solders used for laser welding may have immunologic and/or pathogenic complications. The objective of these studies was to develop a safe, autologous solder. STUDY DESIGN/MATERIALS AND METHODS: Five methods of preparing concentrated autologous plasma protein solder (CAPPS) were evaluated. Next, the CAPPS was evaluated via (1) thermal denaturation studies using differential scanning calorimetry, (2) tissue welding studies to characterize both acute and healing properties. RESULTS: The optimal concentration method to produce CAPPS rapidly was a dialysis method using chemical (osmotic) forces. The CAPPS showed similar denaturation profiles to serum albumin (SA) solders. Acutely, CAPPS provided comparable breaking strengths to SA solders. At 7 days, there was no significant difference in breaking strength or histology between 50% human SA solder and CAPPS (using a porcine skin model). CONCLUSIONS: These studies demonstrate that the CAPPS system provides acceptable acute and chronic properties for laser welding.

Hand-assisted demucosalized gastrocystoplasty comparing different tissue closure methods.

OBJECTIVES: To perform experiments to determine whether a new tissue sealant (SynthaSeal) could be an alternative for suture closure in minimally invasive bladder autoaugmentation gastrocystoplasty using demucosalized stomach. Alternative methods to suture closure for tissue approximation such as laser tissue welding and fibrin glue have been reported. METHODS: Minimally invasive autoaugmentation gastrocystoplasty with demucosalized stomach was performed on 14 female mongrel dogs. Two dogs were used to refine the technique. The remaining dogs were assigned to a suture group (n = 6) or a SynthaSeal group (n = 6). Anastomoses were performed using either SynthaSeal or suture. The in vivo bladder volumes and pressures of the groups were measured before and after gastrocystoplasty. The animals were studied on day 14. Samples of the anastomotic area were taken to measure the tensile strength and stress. Histologic analysis was conducted to assess tissue healing. The anastomotic time was recorded for each group. RESULTS: The tensile strength of the anastomoses in the SynthaSeal group was significantly increased (9.99 +/- 1.14 Newtons) compared with the suture group (5.66 +/- 0.97 Newtons) (P <0.05). The breaking stress comparisons and anastomosis times were equivalent between the two groups. The histologic evaluation revealed minor tissue devitalization and a normal inflammatory response in both groups. CONCLUSIONS: Minimally invasive gastrocystoplasty using demucosalized stomach can be successfully performed with SynthaSeal tissue sealant. This may provide a reliable alternative to suture closure.

Laser tissue welding: a biotechnological advance for the future.

Laser tissue welding as well as other alternative methods of closure will play a more important role in surgical specialties as laparoscopic, endoscopic, and microsurgical techniques continue to develop. Laser tissue welding uses laser energy to anastomose tissues and is ideally suited for applications in which suturing and stapling is difficult. Recent advances have led to a better understanding of the mechanisms of tissue welding. Additionally, technical achievements including the introduction of protein solders and temperature-controlled feedback systems have led to the acceptance of laser tissue welding in clinical medicine. In this article, we describe the history and development of laser tissue welding and review the current and potential applications of this technology.

Impact of solubility on laser tissue-welding with albumin solid solders.

BACKGROUND AND OBJECTIVE: The correlation between the solubility of solid albumin solders and their laser weld strength was investigated. STUDY DESIGN/MATERIALS AND METHODS: Sections of dog intestine were laser welded with soluble or insoluble solid strips of solder. Two different treatments were followed for tissue soldering: "wet weld" and "dry weld." These treatments were chosen to assess the impact of solubility on the repair strength. The laser power and radiation dose were 0.14 W and 14 J/mg, respectively. Calorimetric measures of solders were also performed. RESULTS: The moisture on the tissue partially dissolved the soluble strips at the tissue interface. Hence, the repair strength of the soluble solder was significantly stronger than the repair strength of the insoluble solder (0.22 N and 0.06 N, P < 0.0001). Temperature (approximately 70 degrees C) and enthalpy variation (approximately 1.4 J/g) for denaturing the soluble and insoluble solders were not significantly different (P > 0.05). CONCLUSION: The soluble solid solder behaved like dense liquid solder at the tissue interface. Hence, the interface strength of these two forms of solder should be similar. This correlation made it possible to identify an intrinsic limit for the weld strength of albumin solders.

Carotid artery anastomosis with albumin solder and near infrared lasers: a comparative study.

BACKGROUND AND OBJECTIVE: Laser tissue-welding has been used for anastomosis of carotid arteries. During welding, thermal injury sustained by the vessel walls should be minimized to prevent thrombosis. Two different types of lasers were used and effects on tissue damage were studied in vitro and in vivo. STUDY DESIGN/MATERIALS AND METHODS: End-to-end anastomosis of dog carotid arteries (n = 10) was performed by using a human albumin solder (HAS) in conjunction with Nd:YAG or diode lasers (lambda = 1.32 microm and 1.9 microm, respectively). The arteries were evaluated for patency and evidence of histologic injury after 21 days. Another group of arteries was laser soldered in vitro to measure the intimal and adventitial temperatures by using thermocouples. RESULTS: The arteries repaired with the diode laser sustained significantly less thermal damage than those repaired with Nd:YAG laser, both in vitro and in vivo. In particular, the intimal temperature was significantly lower (P < 0.05) for the diode than for the Nd:YAG repairs (approximately 35 degrees C and approximately 50 degrees C, respectively). In the latter group, the patency rate was 75%, but thrombosis occurred in 75% of the specimens at 21 days. All diode anastomoses were patent and thrombosis developed in only 17% of the arteries. CONCLUSION: Use of the diode laser and albumin solders may provide a means to successfully repair carotid arteries with minimal thermal damage.

Self-expandable chitosan stent: design and preparation.

Stents are largely used in surgical procedures to relieve pathological obstructions. The purpose of the present study was to design and prepare a biocompatible stent with a self-expandable mechanism. Thin films were prepared from deacetylated chitosan (4% w/v) dissolved in acetic acid solution (2% v/v). The chitosan films were tested by a calibrated tensiometer to measure the Young's module (E). The films were used to manufacture stents by pulling and winding them around a cylindrical rod in a helical fashion. Thirteen stents (diameter = 0.5 +/- 0.05 mm, length approximately 4 mm) were inserted into the vas deferens of wistar rats. Upon stent insertion, the vasal anastomosis was achieved with a laser-soldering technique. The animals were sacrificied 8 weeks later. The stress test showed that the chitosan film was elastic (maximum strain = 105% +/- 6%, E = 0.7655 +/- 0.0288 Mpa). The stents self-expanded by releasing their elastic energy. All the stents but one remained open inside the vasa despite high incidence of sperm granuloma. A biocompatible and self-expandable stent with a helical design is proposed.

Role of nitric oxide in renal tubular apoptosis of unilateral ureteral obstruction.

BACKGROUND: The obstructed kidney in unilateral ureteral obstruction (UUO) is characterized by renal atrophy and tissue loss, which is mediated by renal tubular apoptosis. We sought to determine whether NO is involved in renal tubular apoptosis in vitro and in vivo. METHODS: Rat renal tubular epithelial cells (NRK-52E) were subjected to mechanical stretch, and apoptosis and cell size were analyzed by flow cytometry. Furthermore, we studied UUO in mice lacking the gene for inducible nitric oxide synthase (iNOS-/-) and their wild-type littermates. Tubular apoptosis and proliferation were detected by immunostaining. NOS activity and NOS expression were assessed by a citrulline assay and Western blot, respectively. RESULTS: Stretching-induced apoptosis in NRK-52E, which was reduced when NO was increased; conversely, stretch-induced apoptosis was increased when a NOS inhibitor was added to the cells. Stretched cells are larger and more apoptotic than unstretched cells. In UUO, the obstructed kidney of iNOS-/- mice exhibited more apoptotic renal tubules than the wild-type mice through 14 days of UUO. The obstructed kidney of iNOS-/- mice at day 3 showed more proliferative tubules compared with wild type. The obstructed kidney of wild-type mice exhibited higher total NOS activity until day 7 after UUO compared with iNOS-/- mice. However, the obstructed kidney of day 14 wild-type mice exhibited significantly lower iNOS activity and protein compared with the day 0 kidney. CONCLUSION: These results suggest that mechanical stretch is related to renal tubular apoptosis and that NO plays a protective role in this system in UUO.

Mechanism of healing following the Snodgrass repair.

PURPOSE: It has been suggested that healing after tubularized incised plate urethroplasty occurs through re-epithelialization with normal tissue ingrowth or by secondary intent through scarring. We investigated healing in tubularized incised plate urethroplasty. MATERIALS AND METHODS: Hypospadias was created in 5 dogs by incising the ventral urethra, allowed to heal for 21 days and subsequently repaired. During hypospadias creation a tattoo was made longitudinally in the midline dorsal urethral plate. The tattoo was bisected during repair, thus creating 2 distinct lines marking the edges of the incision. A neourethra was tubularized and closed in 2 layers. At 21 days the phallus was harvested, inspected and embedded for histology. RESULTS: The dorsal urethral plate incision contained 2 distinct lines in all samples representing the area of separation between the native and ingrowing urethras. The distance between these lines was 0.9 +/- 0.1 mm. Proximal urethral lumen diameter (3. 3 +/- 0.1 mm.) was not significantly different from that of the neourethral lumen (3.1 +/- 0.1 mm.). Histologically all repairs had intact squamous epithelium. There was normal appearing subepithelial architecture with scant perivascular lymphocytic infiltrates between the tattoos. In contrast, the area around the sutures showed a desmoplastic (fibroblastic) reaction with an inflammatory, primarily neutrophilic response. CONCLUSIONS: Healing of the incision in the dorsal urethral plate during tubularized incised plate urethroplasty occurs by re-epithelialization with normal tissue ingrowth. In contrast, the sutured closure heals with a desmoplastic and inflammatory response.

Antibody to transforming growth factor-beta ameliorates tubular apoptosis in unilateral ureteral obstruction.

BACKGROUND: Unilateral ureteral obstruction (UUO) is characterized by progressive renal atrophy, renal interstitial fibrosis, an increase in renal transforming growth factor-beta (TGF-beta), and renal tubular apoptosis. The present study was undertaken to determine the effect of a monoclonal antibody to TGF-beta (1D11) in UUO. METHODS: Mechanical stretch was applied to tubular epithelial cells (NRK-52E) by a computer-assisted system. Three doses of 1D11 (either 0.5, 2, or 4 mg/rat) were administered to rats one day prior to UUO and every two days thereafter, and kidneys were harvested at day 13. Fibrosis was assessed by measuring tissue hydroxyproline and mRNA for collagen and fibronectin. Apoptosis was assessed with the terminal deoxy transferase uridine triphosphate nick end-labeling assay. TGF-beta levels were determined by bioassay. Western blot and immunostaining were used to identify proliferating cell nuclear antigen (PCNA), p53, bcl-2, and inducible nitric oxide synthase (iNOS). RESULTS: Stretch significantly induced apoptosis in NRK-52E cells, which was accompanied by an increased release of TGF-beta; 1D11 (10 microg/mL) totally inhibited stretch-induced apoptosis. Control obstructed kidney contained 20-fold higher TGF-beta as compared with its unobstructed kidney; 1D11 neutralized tissue TGF-beta of the obstructed kidney. Control obstructed kidney exhibited significantly more fibrosis and tubular apoptosis than its unobstructed counterpart, which was blunted by 1D11. In contrast, 1D11 significantly increased tubular proliferation. p53 immunostaining was localized to renal tubular nuclei of control obstructed kidney and was diminished by 1D11. In contrast, bcl-2 was up-regulated in the 1D11-treated obstructed kidney. Total NOS activity and iNOS activity of the obstructed kidney were increased by 1D11 treatment. CONCLUSION: The present study strongly suggests that an antibody to TGF-beta is a promising agent to prevent renal tubular fibrosis and apoptosis in UUO.

Differential scanning calorimetry of albumin solders: interspecies differences and fatty acid binding effects on protein denaturation.

BACKGROUND AND OBJECTIVE: Understanding albumin solder denaturation is important for laser tissue soldering. Human (HSA), bovine (BSA), porcine (PSA), and canine (CSA) albumin both fatty acid containing (FAC) and fatty acid free (FAF) were evaluated by using differential scanning calorimetry (DSC). STUDY DESIGN/MATERIALS AND METHODS: DSC was used to measure difference thermograms to determine the irreversible thermal denaturation profile for 50% albumin solutions. The denaturation transition's onset, end and peak temperatures, and enthalpy were measured. RESULTS: All FAC species, except BSA, exhibited twin peaked endotherms. Single endotherms were observed for all FAF species and BSA-FAC. Onset and end temperatures were significantly [P < 0.001] lower for all FAF species (except BSA's end temperature). There was a 30% decrease in the denaturation enthalpy between FAF and FAC groups. CONCLUSION: FAF albumin solders were found to denature at significantly lower temperatures, while also having a 30% reduction in enthalpy when compared with their FAC counterparts.

Interaction of nitric oxide and transforming growth factor-beta1 induced by angiotensin II and mechanical stretch in rat renal tubular epithelial cells.

PURPOSE: Changes in intrarenal pressure accompanying unilateral ureteral obstruction can result in tubular mechanical stretch and mediator release from renal tubules. Therefore, we examined the synthesis of nitric oxide and transforming growth factor-beta (TGF-beta), and their interaction in rat renal epithelial cells (NRK-52E) exposed to either angiotensin II or mechanical stretch. MATERIALS AND METHODS: NRK-52E were exposed to either angiotensin II or mechanical stretch. Nitrite and TGF-beta in the supernatant were assessed by the Greiss reaction and bioassay, respectively. The level of cell hypertrophy and intracellular TGF-beta protein was determined by flow cytometry. TGF-beta messenger RNA and inducible nitric oxide synthase protein were detected by reverse transcriptase polymerase chain reaction and Western blot, respectively. RESULTS: Angiotensin II stimulated TGF-beta1 and nitric oxide. The nitric oxide synthase inhibitor, N-nitro-L-arginine (L-NAME) or angiotensin II type I receptor blocker, losartan, inhibited nitric oxide and TGF-beta1 induced by angiotensin II. Flow cytometry showed that either L-NAME or losartan inhibited angiotensin II induced cell hypertrophy. TGF-beta1 inhibited iNOS protein and nitric oxide, whereas an anti-TGF-beta antibody enhanced iNOS. Mechanical stretch induced TGF-beta, inducible NOS protein and nitric oxide. However, TGF-beta expression was not affected by L-arginine or L-NAME when cells were exposed to mechanical stretch. CONCLUSIONS: These results demonstrate that nitric oxide is an intermediate in angiotensin II stimulated TGF-beta1 expression but not in stretch induced TGF-beta expression, and that TGF-beta1 is a negative regulator of nitric oxide in rat renal epithelial cells. The complex interaction of these cytokines may be a target for intervention in the fibrotic and apoptotic processes in the obstructed kidney.

Semi-solid albumin solder improved mechanical properties for laser tissue welding.

BACKGROUND AND OBJECTIVE: A semi-solid albumin solder formulated with hydroxypropylmethylcellulose (HPMC) was designed to improve the characteristics of liquid and solid solders. STUDY DESIGN/MATERIALS AND METHODS: Acute tensile strengths were determined on canine small bowel in vitro by using liquid 50% bovine serum albumin (BSA), semi-solid 48% BSA with HPMC, and solid 60% BSA solder. Long-term healing of liquid and semi-solid solders, compared with a suture control, was evaluated in a porcine skin model, with tensile strength as well as histologic findings obtained on postoperative day 7. RESULTS: Acutely, semi-solid solder demonstrated a significantly (P < 0.05) higher tensile strength when compared with liquid or solid solder. At 7 days, HSA semi-solid and BSA semi-solid had significantly (P < 0.05) higher tensile strength than suture control; however, no differences were seen for liquid or solid solder groups. No differences in histology were appreciable between any of the solder groups in a porcine skin model. CONCLUSION: Acutely and at 7 days, semi-solid solder was stronger than 50% liquid albumin with better handling characteristics.

Welding characteristics of different albumin species with and without fatty acids.

BACKGROUND AND OBJECTIVE: Albumin solders from different species have been used for laser tissue welding without a complete understanding of possible differences between them. The breaking strength of four different species of serum albumin (human, bovine, porcine, and canine), both fatty acid containing (FAC) and fatty acid free (FAF), was determined to evaluate the welding ability of each type of albumin. STUYDY DESIGN/MATERIALS AND METHODS: Acute breaking strengths were determined on canine small bowel by using 50% albumin (FAF and FAC) from human, bovine (BSA), porcine, and canine species. RESULTS: BSA-FAC and BSA-FAF had a significantly higher (P < 0.05) breaking strength than all other groups; furthermore, BSA-FAC was significantly higher (P < 0.05) than BSA-FAF. There was no significant difference in breaking strength when FAF albumin was compared with FAC albumin from humans, pigs, or dogs. CONCLUSION: These experimental results show that species-specific and fatty acid-specific differences exist when these albumin solders are used for laser tissue welding. This finding suggests that modifications in albumin could be used to improve results through decreased thermal damage and increased weld strength.

BCG-induced urinary cytokines inhibit microvascular endothelial cell proliferation.

PURPOSE: Angiogenesis is thought to depend on a net balance of molecules that inhibit or stimulate microvascular endothelial cells. A variety of molecules that affect angiogenesis are induced locally by the administration of intravesical bacille Calmette-Guerin (BCG) for superficial bladder cancer. We sought to determine whether BCG-induced urinary cytokines alter the effects of patient urine on assays of angiogenic activity. MATERIALS AND METHODS: Patients undergoing BCG treatment provided urine samples before and at peak cytokine production times after BCG instillation. Fifty-four urine samples from 8 patients were analyzed by ELISA for a panel of molecules known to affect angiogenesis, and tested for angiogenic activity in human dermal microvascular endothelial cell (HDMEC) proliferation and migration assays. To assess the role of specific BCG-induced cytokines, urinary HDMEC proliferation assays were repeated in the presence of neutralizing antibodies to tumor necrosis factor-alpha (TNF-alpha), interferon-inducible protein-10 (IP-10), and/or interferon-gamma (IFN-gamma). RESULTS: Urinary IFN-gamma, IP-10, TNF-alpha, and vascular endothelial growth factor (VEGF) were induced to nanogram/ml amounts by BCG treatment. While pre-BCG treatment urine samples minimally stimulated microvascular endothelial cell proliferation (+ 9%), post-BCG treatment urine became progressively inhibitory to endothelial cells (to -85%, p = 0.005) during weekly treatment courses. Neutralizing antibodies to TNF-alpha or to IP-10, either alone or in combination, greatly reduced this inhibitory effect. CONCLUSIONS: Intravesical BCG induces a cytokine-rich urinary microenvironment that is inhibitory to human endothelial cells. Urinary cytokine profiles and assays of angiogenic inhibition may provide prognostically important information regarding BCG treatment outcomes.