Molecular Phylogenetics and Population Genetics of the Dengue Vector Aedes aegypti From the Arabian Peninsula.

Aedes aegypti mosquito is the principal dengue vector in the Kingdom of Saudi Arabia (KSA); however, no study has addressed its ecology and population structure yet. Therefore, we report on Ae. aegypti phylo- and population genetics using three DNA markers: COI, ND4, and rDNA-ITS2. Sampling the immature stages of Ae. aegypti revealed that water storage tanks (34.3% of habitats) were the most productive and contained 33% of immatures stages. Other important habitats included containers for wastewater drainage (including air-conditioning and water cooler trays) and containers associated with ornamentation. Shallow water leakage spots (2.7% of habitats, 8% of immatures) can be considered rare-but-epidemiologically-important containers. Neighbor-joining (NJ) phylogenetic analysis of Ae. aegypti identified 8, 14, and 9 haplotypes of COI, ND4, and ITS2, respectively, and revealed high levels of genetic variation in Ae. aegypti populations of KSA. Global distribution of haplotypes also indicated multiple gene introductions into these populations, with high levels of intra-population genetic variation and continuous gene exchange. The neutrality values indicated a deficiency of alleles and suggested that the KSA Ae. aegypti loci tested did not follow a neutral model of molecular evolution. Fst values and AMOVA indicated that most of the genetic variation in the KSA Ae. aegypti populations is due to intra- rather than inter-population differences. This is the first comprehensive report on the phylo- and population genetics of Ae. aegypti from the Arabian Peninsula. This information expands our understanding of the ecology and population dynamics of this important arboviral vector for informed control efforts.

Complete Genome Sequence of Klebsiella pneumoniae Podophage Pylas.

Carbapenemase-producing Klebsiella pneumoniae is an important opportunistic pathogen due to its drug resistance. This study reports on the isolation and characterization of a podophage, named Pylas, infecting this bacterium. The complete genome of phage Pylas is described, and it is distantly related to the well-studied phage N4.

An intense, few-cycle source in the long-wave infrared.

For the last several decades, the wavelength range accessible for strong-field, few-cycle studies has remained limited to the visible, near infrared and mid-wave infrared regimes. In particular, sources in the long-wave infrared have been lacking. We report the development of a 1 kHz, few-cycle laser source with up to a 9 µm central wavelength and gigawatt peak powers. When focused, this source can ionize gas targets, which we demonstrate here through the ionization of atomic xenon at wavelengths ranging from 5 µm to 9 µm. This opens up new opportunities for fundamental atomic and molecular physics, enabling experimental tests of strong-field ionization theories in the extreme long-wavelength, few-cycle limit and the direct excitation of vibrational transitions in organic molecules.

Toward Universal SERS Detection of Disease Signaling Bioanalytes Using 3D Self-Assembled Nonplasmonic near-Quantum-Scale Silicon Probe.

Currently, the quantum-scale surface-enhanced Raman scattering (SERS) properties of Si materials have yet to be discovered for universal biosensing applications. In this study, a potential universal biosensing probe is generated by activating the SERS functionality of Si nanostructures through near quantum-scale (nQS) engineering. We introduce herein 3D nonplasmonic Si nanomesh structure with nQS defects for SERS biosensing applications. Through ionization of a single-crystal defect-free Si wafer, highly defect-rich Si subnano-orbs (sNOs) are fabricated and self-assemble as connective 3D Si nanomesh structures with enhanced SERS biosensing activity. By amending the laser ionization and ion-ion interactions, we observe the controlled synthesis of engineered nQS defects in the form of nQS-grain boundary disorder or surface nQS voids within the interconnected Si sNOs. To our knowledge, it is shown here for the first time that defect-rich Si nanomesh structures exhibit enhanced Raman activity, with the nQS morphological and crystallographic defects acting as the prime SERS contributors without a plasmonic contribution. The SERS biosensing sensitivity with the synthesized defect-rich Si nanomesh structures without an additional plasmonic material was evaluated using of a tripeptide biomarker l-glutathione (GSH); we observe an enhancement factor value of ∼102 for the GSH biomolecules with 10-9 M sensitivity, a phenomena to our knowledge that has yet to be reported. Additionally, the SERS detection of multiple disease-signaling biomolecules (cysteine, tryptophan, and methionine) is achieved at very low analyte concentration (10-9 M). These results indicate a potential new dimension to universal SERS biosensing applications with these unique nonplasmonic defect-rich 3D nQS-Si nanostructures.

Physiological Evaluation of Cooling Devices in Conjunction With Personal Protective Ensembles Recommended for Use in West Africa.

OBJECTIVE: Cooling devices (CDs) worn under personal protective equipment (PPE) can alleviate some of the heat stress faced by health care workers responding to the Ebola outbreak in West Africa. METHODS: Six healthy, young individuals were tested while wearing 4 different CDs or no cooling (control) under PPE in an environmental chamber (32°C/92% relative humidity) while walking (3 METs, 2.5 mph, 0% grade) on a treadmill for 60 minutes. Exercise was preceded by a 15-minute stabilization period and a 15-minute donning period. RESULTS: The control condition resulted in a significantly higher rectal temperature (Tre) at the end of the exercise than did all CD conditions (CD1, P=0.004; CD2, P=0.01; CD3, P=0.000; CD4, P=0.000) with CD1 and CD2 resulting in a higher Tre than CD3 and CD4 (P<0.05). The control condition resulted in a higher heart rate (HR) at the end of exercise than did the CD3 (P=0.01) and CD4 (P=0.009) conditions, whereas the HR of the CD1 and CD2 conditions was higher than that of the CD3 and CD4 conditions (P<0.05). Weight loss in the control condition was higher than in the CD3 (P=0.003) and CD4 (P=0.01) conditions. Significant differences in subjective measurements of thermal stress were found across conditions and time. CONCLUSIONS: Use of CDs can be advantageous in decreasing the negative physiological and subjective responses to the heat stress encountered by health care workers wearing PPE in hot and humid environments. (Disaster Med Public Health Preparedness. 2017;11:573-579).

Programmable SERS active substrates for chemical and biosensing applications using amorphous/crystalline hybrid silicon nanomaterial.

We present the creation of a unique nanostructured amorphous/crystalline hybrid silicon material that exhibits surface enhanced Raman scattering (SERS) activity. This nanomaterial is an interconnected network of amorphous/crystalline nanospheroids which form a nanoweb structure; to our knowledge this material has not been previously observed nor has it been applied for use as a SERS sensing material. This material is formed using a femtosecond synthesis technique which facilitates a laser plume ion condensation formation mechanism. By fine-tuning the laser plume temperature and ion interaction mechanisms within the plume, we are able to precisely program the relative proportion of crystalline Si to amorphous Si content in the nanospheroids as well as the size distribution of individual nanospheroids and the size of Raman hotspot nanogaps. With the use of Rhodamine 6G (R6G) and Crystal Violet (CV) chemical dyes, we have been able to observe a maximum enhancement factor of 5.38 × 10(6) and 3.72 × 10(6) respectively, for the hybrid nanomaterial compared to a bulk Si wafer substrate. With the creation of a silicon-based nanomaterial capable of SERS detection of analytes, this work demonstrates a redefinition of the role of nanostructured Si from an inactive to SERS active role in nano-Raman sensing applications.

Hybridized enhancement of the SERS detection of chemical and bio-marker molecules through Au nanosphere ornamentation of hybrid amorphous/crystalline Si nanoweb nanostructure biochip devices.

We report the fabrication of hybrid Si SERS nanobiosensor biochip devices. The biochip exhibits a proposed hybridized SERS biomolecule sensing phenomenon with the creation of a SERS-active 3D amorphous/crystalline silicon nanoweb that has undergone nano-ornamentation with gold nanospheres. The underlying interconnected 3D hybrid Si nanospheroid network created by a laser-ion plume formation mechanism is nano-ornamented with gold nanospheres using a physical ion plasma deposition method to enhance the nano-Raman sensitivity of these nanostructures. We observe a tunable hybridized enhancement of analyte detection that is a result of the distinct paired SERS mechanisms from the active nano-hybrid Si nanoweb structure and the Au nanosphere ornamentation, a result which to date is yet to be reported for biosensing with SERS semiconductor materials. By linking the SERS enhancing effects of the base nano-hybrid Si nanoweb material with the SERS enhancing characteristics of gold nanospheres, we have observed a significant increase in sensitivity for the detection of chemical and bio-label molecules. Through manipulation of the hybrid Si nanoweb structure formation in coordination with the modulation of the nano-ornamentation process, we observe a hybrid nanostructured SERS-active nanomaterial that can be tailored specifically for biosensing applications. We report an observed enhancement factor (EF) for chemical molecule crystal violet (CV) of 3.0 × 107 and an EF value for the bio-label molecule rhodamine 6G (R6G) of 1.4 × 107 taking an Au nanosphere ornamented Si wafer as a benchmark.

Evaluation of protective ensemble thermal characteristics through sweating hot plate, sweating thermal manikin, and human tests.

The purpose of this study was to evaluate the predictive capability of fabric Total Heat Loss (THL) values on thermal stress that Personal Protective Equipment (PPE) ensemble wearers may encounter while performing work. A series of three tests, consisting of the Sweating Hot Plate (SHP) test on two sample fabrics and the Sweating Thermal Manikin (STM) and human performance tests on two single-layer encapsulating ensembles (fabric/ensemble A = low THL and B = high THL), was conducted to compare THL values between SHP and STM methods along with human thermophysiological responses to wearing the ensembles. In human testing, ten male subjects performed a treadmill exercise at 4.8 km and 3% incline for 60 min in two environmental conditions (mild = 22°C, 50% relative humidity (RH) and hot/humid = 35°C, 65% RH). The thermal and evaporative resistances were significantly higher on a fabric level as measured in the SHP test than on the ensemble level as measured in the STM test. Consequently the THL values were also significantly different for both fabric types (SHP vs. STM: 191.3 vs. 81.5 W/m(2) in fabric/ensemble A, and 909.3 vs. 149.9 W/m(2) in fabric/ensemble B (p < 0.001). Body temperature and heart rate response between ensembles A and B were consistently different in both environmental conditions (p < 0.001), which is attributed to significantly higher sweat evaporation in ensemble B than in A (p < 0.05), despite a greater sweat production in ensemble A (p < 0.001) in both environmental conditions. Further, elevation of microclimate temperature (p < 0.001) and humidity (p < 0.01) was significantly greater in ensemble A than in B. It was concluded that: (1) SHP test determined THL values are significantly different from the actual THL potential of the PPE ensemble tested on STM, (2) physiological benefits from wearing a more breathable PPE ensemble may not be feasible with incremental THL values (SHP test) less than approximately 150-200 W·m(2), and (3) the effects of thermal environments on a level of heat stress in PPE ensemble wearers are greater than ensemble thermal characteristics.