A dynamic covalent approach to [PtnL2n]2n+ cages.

A dynamic covalent approach was exploited to generate a family of homometallic [PtnL2n]2n+ cage (predominantly [Pt2L4]4+ systems) architectures. The family of platinum(II) architectures were characterized using 1H nuclear magnetic resonance (NMR) and diffusion ordered spectroscopy (DOSY), electrospray ionization mass spectrometry (ESI-MS) and the molecular structures of two cages were determined by X-ray crystallography.

Controlling Excited State Localization in Bichromophoric Photosensitizers via the Bridging Group.

A series of photosensitizers comprised of both an inorganic and an organic chromophore are investigated in a joint synthetic, spectroscopic, and theoretical study. This bichromophoric design strategy provides a means by which to significantly increase the excited state lifetime by isolating the excited state away from the metal center following intersystem crossing. A variable bridging group is incorporated between the donor and acceptor units of the organic chromophore, and its influence on the excited state properties is explored. The Franck-Condon (FC) photophysics and subsequent excited state relaxation pathways are investigated with a suite of steady-state and time-resolved spectroscopic techniques in combination with scalar-relativistic quantum chemical calculations. It is demonstrated that the presence of an electronically conducting bridge that facilitates donor-acceptor communication is vital to generate long-lived (32 to 45 µs), charge-separated states with organic character. In contrast, when an insulating 1,2,3-triazole bridge is used, the excited state properties are dominated by the inorganic chromophore, with a notably shorter lifetime of 60 ns. This method of extending the lifetime of a molecular photosensitizer is, therefore, of interest for a range of molecular electronic devices and photophysical applications.

A Lantern-Shaped Pd(II) Cage Constructed from Four Different Low-Symmetry Ligands with Positional and Orientational Control: An Ancillary Pairings Approach.

One of the key challenges of metallo-supramolecular chemistry is to maintain the ease of self-assembly but, at the same time, create structures of increasingly high levels of complexity. In palladium(II) quadruply stranded lantern-shaped cages, this has been achieved through either 1) the formation of heteroleptic (multi-ligand) assemblies, or 2) homoleptic assemblies from low-symmetry ligands. Heteroleptic cages formed from low-symmetry ligands, a hybid of these two approaches, would add an additional rich level of complexity but no examples of these have been reported. Here we use a system of ancillary complementary ligand pairings at the termini of cage ligands to target heteroleptic assemblies: these complementary pairs can only interact (through coordination to a single Pd(II) metal ion) between ligands in a cis position on the cage. Complementarity between each pair (and orthogonality to other pairs) is controlled by denticity (tridentate to monodentate or bidentate to bidentate) and/or hydrogen-bonding capability (AA to DD or AD to DA). This allows positional and orientational control over ligands with different ancillary sites. By using this approach, we have successfully used low-symmetry ligands to synthesise complex heteroleptic cages, including an example with four different low-symmetry ligands.

Exploiting reduced-symmetry ligands with pyridyl and imidazole donors to construct a second-generation stimuli-responsive heterobimetallic [PdPtL4]4+ cage.

A new sequential metalation strategy that enables the assembly of a new more robust reduced symmetry heterobimetallic [PdPtL4]4+ cage C is reported. By exploiting a low-symmetry ditopic ligand (L) that features imidazole and pyridine donor units we were able to selectively form a [Pt(L)4]2+ "open-cage" complex. When this was treated with Pd(ii) ions the cage C assembled. 1H and DOSY nuclear magnetic resonance (NMR) spectroscopy and electrospray ionisation mass spectrometry (ESIMS) data were consistent with the quantitative formation of the cage and the heterobimetallic structure was confirmed by single crystal X-ray crystallography. The cage C was shown to bind anionic guest molecules. NMR studies suggested that these guests interacted with the cavity of the cage in a specific orientation and this was confirmed for the mesylate ion (MsO-) : C host-guest adduct using X-ray crystallography. In addition, the system was shown to be stimulus-responsive and could be opened and closed on demand when treated with appropriate stimuli. If a guest molecule was bound within the cage, the opening and closing was accompanied by the release and re-uptake of the guest molecule.

Stoichiometric Control of Guest Recognition of Self-Assembled Palladium(II)-Based Supramolecular Architectures.

We report flexible [Pd(L)2 ]2+ complexes where there is self-recognition, driven by π-π interactions between electron-rich aromatic arms and the cationic regions they are tethered to. This self-recognition hampers the association of these molecules with aromatic molecular targets in solution. In one case, this complex can be reversibly converted to an 'open' [Pd2 (L)2 ]4+ macrocycle through introduction of more metal ion. This is accomplished by the ligand having two bidentate binding sites: a 2-pyridyl-1,2,3-triazole site, and a bis-1,2,3-triazole site. Due to favourable hydrogen bonding, the 2-pyridyl-1,2,3-triazole units reliably coordinate in the [Pd(L)2 ]2+ complex to control speciation: a second equivalent of Pd(II) is required to enforce coordination to bis-triazole sites and form the macrocycle. The macrocycle interacts with a molecular substrate with higher affinity. In this fashion we are able to use stoichiometry to reversibly switch between two different species and regulate guest binding.

Exploiting Supramolecular Interactions to Control Isomer Distributions in Reduced-Symmetry [Pd2L4]4+ Cages.

High-symmetry metallosupramolecular architectures (MSAs) have been exploited for a range of applications including molecular recognition, catalysis, and drug delivery. Recently, there have been increasing efforts to enhance those applications by generating reduced-symmetry MSAs. Here we report our attempts to use supramolecular (dispersion and hydrogen-bonding) forces and solvophobic effects to generate isomerically pure [Pd2(L)4]4+ cage architectures from a family of new reduced-symmetry ditopic tripyridyl ligands. The reduced-symmetry tripyridyl ligands featured either solvophilic polyether chains, solvophobic alkyl chains, or amino substituents. We show using NMR spectroscopy, high-performance liquid chromatography, X-ray diffraction data, and density functional theory calculations that the combination of dispersion forces and solvophobic effects does not provide any control of the [Pd2(L)4]4+ isomer distribution with mixtures of all four cage isomers (HHHH, HHHT, cis-HHTT, or trans-HTHT, where H = head and T = tail) obtained in each case. More control was obtained by exploiting hydrogen-bonding interactions between amino units. While the cage assembly with a 3-amino-substituted tripyridyl ligand leads to a mixture of all four possible isomers, the related 2-amino-substituted tripyridyl ligand generated a cis-HHTT cage architecture. Formation of the cis-HHTT [Pd2(L)4]4+ cage was confirmed using NMR studies and X-ray crystallography.

Hydrazone- and imine-containing [PdPtL4]4+ cages: a comparative study of the stability and host-guest chemistry.

A new [PdPtL4]4+ heterobimetallic cage containing hydrazone linkages has been synthesised using the sub-component self-assembly approach. 1H and DOSY nuclear magnetic resonance (NMR) spectroscopy and electrospray ionisation mass spectrometry (ESIMS) data were consistent with the formation of the [PdPtL4]4+ architecture. The cage was stimulus-responsive and could be partially disassembled and reassembled by the addition of dimethylaminopyridine (DMAP) and p-tolenesulfonic acid (TsOH), respectively. Additionally, the stability of the hydrazone cage against hydrolysis in the presence of water and nucleophilic decomposition in the presence of guest molecules was compared to a previously synthesised imine-containing [PdPtL4]4+ cage. It was established that the hydrazone linkage was more resistant to hydrolysis. Furthermore, the host-guest (HG) chemistry with a series of drug and drug-like molecules was examined. The hydrazone cage was shown to interact with cisplatin while the smaller imine cage was shown to interact with 5-fluorouracil and oxaliplatin in CD3CN. No HG interactions were observed in the more polar d6-DMSO. In vitro antiproliferative activity studies demonstrated both cages were active against the cancer cell lines tested and displayed half-maximal inhibitory (IC50) values in the range of 25-35 µM. Most [PdPtL4]4+-drug mixtures tested had higher IC50 values than the hosts. However, the [PdPtL4]4+ cages, and [PdPtL4]4+:drug mixtures were less cytotoxic than the well established anticancer drugs cisplatin, oxaliplatin and 5-fluorouracil.

Directing metallo-supramolecular assembly through complementarity.

In chemistry, function and behaviour flow directly from structure. As chemists seek to develop highly complex functional molecules, we need to harness routes to complex structures. In metallosupramolecular self-assembly, this requires the development of strategies to overcome the tendency of self-assembled systems to be either (1) highly symmetric in the presence of a single ligand type, or (2) statistical equilibrium mixtures in the presence of multiple ligands. This Feature Article describes our efforts to enforce control for the formation of highly ordered and defined architectures that are either low symmetry or comprise lower symmetry components. We have used complementary and orthogonal arrangements of ligands at the metal ion site to control connectivity, with additional conformational or geometric regulation arising through π-π interactions.

A Switchable Palladium(II) Trefoil Entangled Tetrahedron with Temperature Dependence and Concentration Independence.

Self-assembly makes metallo-interlocked architectures attractive targets, but being in equilibrium with smaller species means that they can suffer from dilution effects. We show that a junctioned system gives rise to a [Pd4 (L)2 ]8+ trefoil entangled tetrahedron irrespective of concentration. Heating the sample reversibly shifts the equilibrium from the knot to an isomeric non-interlocked dual metallo-cycle, demonstrating that thermodynamic equilibria can still be exploited for switching even in the absence of concentration effects.

Post-Synthetic Modification of a Porous Hydrocarbon Cage to Give a Discrete Co24 Organometallic Complex.

A new alkyne-based hydrocarbon cage was synthesized in high overall yield using alkyne-alkyne coupling in the cage forming step. The cage is porous and displays a moderately high BET surface area (546 m2 g-1 ). The cage loses crystallinity on activation and thus is porous in its amorphous form, while very similar cages have been either non-porous, or retained crystallinity on activation. Reaction of the cage with Co2 (CO)8 results in exhaustive metalation of its 12 alkyne groups to give the Co24 (CO)72 adduct of the cage in good yield.

A Catalogue of Orthogonal Complementary Ligand Pairings for Palladium(II) Complexes.

Molecular recognition is a form of information transfer, seen in the base pairing in DNA which is derived from the identity (acceptor or donor) and number of hydrogen bond sites within each base. Here we report bis-ligand palladium(II) complexes that exhibit similar complementarity. Pd(II) has square planar four-coordinate geometry, giving control over ligand orientation and denticity. Pairings were developed using ligand denticity (3 : 1 or 2 : 2), and hydrogen bond capability (AA:DD or AD:DA) or lack thereof. Five pairings were investigated, with two sets of four being found fully orthogonal. The two 3 : 1 pairings exhibited limited ligand exchange. The extent of this exchange varied dependant on solvent from 2 : 1 (desired to undesired) to 6 : 1. A reliable and varied set of ligand pairs have therefore been developed for bis-ligand coordination sphere engineering in pursuit of sorting for complex molecular architectures and molecular-level information storage and transfer events.

Heteroleptic Tripalladium(II) Cages.

There is a concerted attempt to develop self-assembled metallo-cages of greater structural complexity, and heteroleptic PdII cages are emerging as prime candidates in these efforts. Most of these are dinuclear: few examples of higher nuclearity have been reported. We demonstrate here a robust method for the formation of tripalladium(II) cages from the 2 : 3 : 3 combination of a tritopic ligand, PdII , and a selection of ditopic ligands of the correct size and geometry.

Heterotrimetallic Double Cavity Cages: Syntheses and Selective Guest Binding.

A strategy for the generation of heterotrimetallic double cavity (DC) cages [Pdn Ptm L4 ]6+ (DC1: n=1, m=2; and DC2: n=2, m=1) is reported. The DC cages were generated by combining an inert platinum(II) tetrapyridylaldehyde complex with a suitably substituted pyridylamine and PdII ions. 1 H and DOSY nuclear magnetic resonance spectroscopy (NMR) and electrospray ionization mass spectrometry (ESIMS) data were consistent with the formation of the DC architectures. DC1 and DC2 were shown to interact with several different guest molecules. The structure of DC1, which features two identical cavities, binding two 2,6-diaminoanthraquinone (DAQ) guest molecules was determined by single-crystal X-ray crystallography. In addition, DC1 was shown to bind two molecules of 5-fluorouracil (5-FU) in a statistical (non-cooperative) manner. In contrast, DC2, which features two different cage cavities, was found to interact with two different guests, 5-FU and cisplatin, selectively.

Roles of Metal Ions in Foldamers and Other Conformationally Flexible Supramolecular Systems.

Conformational control is a key prerequisite for much molecular function. As chemists seek to create complex molecules that have applications beyond the academic laboratory, correct spatial positioning is critical. This is particularly true of flexible systems. Conformationally flexible molecules show potential because they resemble in many cases naturally occurring analogues such as the secondary structures found in proteins and peptides such as α-helices and ß-sheets. One of the ways in which conformation can be controlled in these molecules is through interaction with or coordination to metal ions. This review explores how secondary structure (i.e., controlled local conformation) in foldamers and other conformationally flexible systems can be enforced or modified through coordination to metal ions. We hope to provide examples that illustrate the power of metal ions to influence this structure toward multiple different outcomes.

Discrete Self-Assembled Metallo-Foldamers with Heteroleptic Sequence Specificity.

Discrete and structurally diverse foldamer sequences are constructed in both natural and abiotic systems primarily using inert connectivity with irreversible organic covalent bonds, serving to preserve the identity of the sequence. The formation of sequences under thermodynamic control using labile coordination bonds would be attractive for synthetic ease and modular capability, but this presents issues regarding sequence preservation. Here is presented an approach integrating palladium(II) metal ions into the sequence itself, with fidelity maintained through use of complementary pairings of ligand arrangements at the metal centre. This is accomplished using sites of different denticity and/or hydrogen bonding capability. In this fashion, discrete and ordered metallo-sequences are formed as thermodynamic products in a single step, and these then fold into defined conformations due to π-π interactions between electron-rich and -poor aromatic regions of the combined componentry.

Excited-State Switching in Rhenium(I) Bipyridyl Complexes with Donor-Donor and Donor-Acceptor Substituents.

The optical properties of two Re(CO)3(bpy)Cl complexes in which the bpy is substituted with two donor (triphenylamine, TPA, ReTPA2) as well as both donor (TPA) and acceptor (benzothiadiazole, BTD, ReTPA-BTD) groups are presented. For ReTPA2 the absorption spectra show intense intraligand charge-transfer (ILCT) bands at 460 nm with small solvatochromic behavior; for ReTPA-BTD the ILCT transitions are weaker. These transitions are assigned as TPA → bpy transitions as supported by resonance Raman data and TDDFT calculations. The excited-state spectroscopy shows the presence of two emissive states for both complexes. The intensity of these emission signals is modulated by solvent. Time-resolved infrared spectroscopy definitively assigns the excited states present in CH2Cl2 to be MLCT in nature, and in MeCN the excited states are ILCT in nature. DFT calculations indicated this switching with solvent is governed by access to states controlled by spin-orbit coupling, which is sufficiently different in the two solvents, allowing to select out each of the charge-transfer states.

Quadruply Stranded Metallo-Supramolecular Helicate [Pd2(hextrz)4]4+ Acts as a Molecular Mimic of Cytolytic Peptides.

[Pd2(hextrz)4]4+ is a quadruply stranded helicate, a novel bioinorganic complex designed to mimic the structure and function of proteins due to its high stability and supramolecular size. We have previously reported that [Pd2(hextrz)4]4+ exhibited cytotoxicity toward a range of cell lines, with IC50 values ranging from 3 to 10 µM. Here we demonstrate that [Pd2(hextrz)4]4+ kills cells by forming pores within the cell membrane, a mechanism of cell death analogous to the naturally occurring cytolytic peptides. [Pd2(hextrz)4]4+ induced cell death is characterized by an initial influx of Ca2+, followed by nuclear condensation and mitochondrial swelling. This is accompanied by progressive cell membrane damage that results in the formation of large blebs at the cell surface. This allows the efflux of molecules from the cell leading to loss of cell viability. These data suggest that it may be possible to design metallo-supramolecular complexes to mimic the cytotoxic action of pore forming proteins and peptides and so provide a new class of drug to treat cancer, autoimmune disorders, and microbial infection.

Excited-State Switching Frustrates the Tuning of Properties in Triphenylamine-Donor-Ligand Rhenium(I) and Platinum(II) Complexes.

The photophysical properties of a series of rhenium(I) tricarbonyl and platinum(II) bis(acetylide) complexes containing a triphenylamine (TPA)-substituted 1,10-phenanthroline ligand have been examined. The complexes possess both metal-to-ligand charge-transfer (MLCT) and intraligand charge-transfer (ILCT) transitions that absorb in the visible region. The relative energies and ordering of the absorbing CT states have been successfully controlled by changing the metal center and modulating the donating ability of the TPA group through the addition of electron-donating methoxy and electron-withdrawing cyano groups. The ground-state properties behave in a predictable manner as a function of the TPA substituent and are characterized with a suite of techniques including electronic absorption spectroscopy, resonance Raman spectroscopy, electrochemistry, and time-dependent density functional theory calculations. However, systematic control over the ground-state properties of the complexes does not extend to their excited-state behavior. Unexpectedly, despite variation of both the MLCT and ILCT state energies, all of the luminescent complexes displayed near-isoenergetic emission at 298 K, yet the emissive lifetimes of the complexes vary from 290 ns to 3.9 µs. Excited-state techniques including transient absorption and transient resonance Raman, combined with a suite of quantum-chemical calculations, including scalar relativistic effects to elucidate competitive excited-state relaxation pathways, have been utilized to aid in assignment of the long-lived state in the complexes, which was shown to possess differing 3MLCT and 3ILCT contributions across the series.

Using Complementary Ligand Denticity to Direct Metallosupramolecular Structure about Metal Ions with Square-Planar Geometry.

An understanding of methods to control the structure of self-assembled architectures is central to the efforts of chemists interested in self-assembly synthesis. Metal ions with square-planar geometry are a favorite of metallosupramolecular chemists, as there are only a limited number of possible ligand arrangements around the metal ion. Two such arrangements, firstly four monodentate donor sites (1,1,1,1), and secondly two monodentate donors and one bidentate donor (1,1,2) exemplify the symmetry interaction and ligand directed approaches, respectively. Symmetry interaction approaches using two bidentate sites (2,2) or a monodentate and tridentate site (1,3) have not received the same level of attention. In these arrangements, two complementary sites combine at the metal ion(s). This Minireview seeks to detail strategies employed to direct structure in systems with these arrangements, and is illustrated with key exemplars from the field.