Measuring thermal conductivity of nanostructures with the 3ωmethod: the need for finite element modeling.

Conventional techniques of measuring thermal transport properties may be unreliable or unwieldy when applied to nanostructures. However, a simple, all-electrical technique is available for all samples featuring high-aspect-ratio: the 3ωmethod. Nonetheless, its usual formulation relies on simple analytical results which may break down in real experimental conditions. In this work we clarify these limits and quantify them via adimensional numbers and present a more accurate, numerical solution to the 3ωproblem based on the Finite Element Method (FEM). Finally, we present a comparison of the two methods on experimental datasets from InAsSb nanostructures with different thermal transport properties, to stress the crucial need of a FEM counterpart to 3ωmeasurements in nanostructures with low thermal conductivity.

Roadmap on thermoelectricity.

The increasing energy demand and the ever more pressing need for clean technologies of energy conversion pose one of the most urgent and complicated issues of our age. Thermoelectricity, namely the direct conversion of waste heat into electricity, is a promising technique based on a long-standing physical phenomenon, which still has not fully developed its potential, mainly due to the low efficiency of the process. In order to improve the thermoelectric performance, a huge effort is being made by physicists, materials scientists and engineers, with the primary aims of better understanding the fundamental issues ruling the improvement of the thermoelectric figure of merit, and finally building the most efficient thermoelectric devices. In this Roadmap an overview is given about the most recent experimental and computational results obtained within the Italian research community on the optimization of composition and morphology of some thermoelectric materials, as well as on the design of thermoelectric and hybrid thermoelectric/photovoltaic devices.

Heat-Driven Iontronic Nanotransistors.

Thermoelectric polyelectrolytes are emerging as ideal material platform for self-powered bio-compatible electronic devices and sensors. However, despite the nanoscale nature of the ionic thermodiffusion processes underlying thermoelectric efficiency boost in polyelectrolytes, to date no evidence for direct probing of ionic diffusion on its relevant length and time scale has been reported. This gap is bridged by developing heat-driven hybrid nanotransistors based on InAs nanowires embedded in thermally biased Na+ -functionalized (poly)ethyleneoxide, where the semiconducting nanostructure acts as a nanoscale probe sensitive to the local arrangement of the ionic species. The impact of ionic thermoelectric gating on the nanodevice electrical response is addressed, investigating the effect of device architecture, bias configuration and frequency of the heat stimulus, and inferring optimal conditions for the heat-driven nanotransistor operation. Microscopic quantities of the polyelectrolyte such as the ionic diffusion coefficient are extracted from the analysis of hysteretic behaviors rising in the nanodevices. The reported experimental platform enables simultaneously the ionic thermodiffusion and nanoscale resolution, providing a framework for direct estimation of polyelectrolytes microscopic parameters. This may open new routes for heat-driven nanoelectronic applications and boost the rational design of next-generation polymer-based thermoelectric materials.

Impact of electrostatic doping on carrier concentration and mobility in InAs nanowires.

We fabricate dual-gated electric double layer (EDL) field effect transistors based on InAs nanowires gated with an ionic liquid, and we perform electrical transport measurements in the temperature range from room temperature to 4.2 K. By adjusting the spatial distribution of ions inside the ionic liquid employed as gate dielectric, we electrostatically induce doping in the nanostructures under analysis. We extract low-temperature carrier concentration and mobility in very different doping regimes from the analysis of current-voltage characteristics and transconductances measured exploiting global back-gating. In the liquid gate voltage interval from -2 to 2 V, carrier concentration can be enhanced up to two orders of magnitude. Meanwhile, the effect of the ionic accumulation on the nanowire surface turns out to be detrimental to the electron mobility of the semiconductor nanostructure: the electron mobility is quenched irrespectively to the sign of the accumulated ionic species. The reported results shine light on the effective impact on crucial transport parameters of EDL gating in semiconductor nanodevices and they should be considered when designing experiments in which electrostatic doping of semiconductor nanostructures via electrolyte gating is involved.

Thermoelectric Conversion at 30 K in InAs/InP Nanowire Quantum Dots.

We demonstrate high-temperature thermoelectric conversion in InAs/InP nanowire quantum dots by taking advantage of their strong electronic confinement. The electrical conductance G and the thermopower S are obtained from charge transport measurements and accurately reproduced with a theoretical model accounting for the multilevel structure of the quantum dot. Notably, our analysis does not rely on the estimate of cotunnelling contributions, since electronic thermal transport is dominated by multilevel heat transport. By taking into account two spin-degenerate energy levels we are able to evaluate the electronic thermal conductance K and investigate the evolution of the electronic figure of merit ZT as a function of the quantum dot configuration and demonstrate ZT ≈ 35 at 30 K, corresponding to an electronic efficiency at maximum power close to the Curzon-Ahlborn limit.