The influence of full-thickness supraspinatus tears on abduction moments: the importance of the central tendon.

BACKGROUND: Detachment of the central tendon of the supraspinatus from its insertion is considered to be crucial to functional deficit. The aim of the present study was to assess the function of the supraspinatus in terms of abduction moments by introducing different tear configurations to assess the functional effect of the central tendon insertion. METHODS: Ten fresh frozen shoulders from five cadavers were prepared for testing. A testing protocol was established to measure the abduction moment of the supraspinatus under physiological loading tailored to the anthropometrics of each specimen. Four conditions were tested: intact supraspinatus; complete detachment of portion of the supraspinatus tendon anterior to the main central tendon; detachment of the main central tendon; and detachment of the region of the supraspinatus posterior to the main central tendon. RESULTS: There was a significant and large reduction in abduction moment when the central tendon was sectioned (p < 0.05). A smaller reduction in abduction moment was found when the regions anterior and posterior to the main central tendon were sectioned (p < 0.05). CONCLUSIONS: The central tendon is vital in the role of functional arm abduction through force transmission through the intact rotator cuff. Reinsertion of the central tendon in the correct anatomical location is desirable to optimize functional outcome of surgery.

A Patient-Specific Foot Model for the Estimate of Ankle Joint Forces in Patients with Juvenile Idiopathic Arthritis.

Juvenile idiopathic arthritis (JIA) is the leading cause of childhood disability from a musculoskeletal disorder. It generally affects large joints such as the knee and the ankle, often causing structural damage. Different factors contribute to the damage onset, including altered joint loading and other mechanical factors, associated with pain and inflammation. The prediction of patients' joint loading can hence be a valuable tool in understanding the disease mechanisms involved in structural damage progression. A number of lower-limb musculoskeletal models have been proposed to analyse the hip and knee joints, but juvenile models of the foot are still lacking. This paper presents a modelling pipeline that allows the creation of juvenile patient-specific models starting from lower limb kinematics and foot and ankle MRI data. This pipeline has been applied to data from three children with JIA and the importance of patient-specific parameters and modelling assumptions has been tested in a sensitivity analysis focused on the variation of the joint reaction forces. This analysis highlighted the criticality of patient-specific definition of the ankle joint axes and location of the Achilles tendon insertions. Patient-specific detection of the Tibialis Anterior, Tibialis Posterior, and Peroneus Longus origins and insertions were also shown to be important.

Scapula kinematics of pull-up techniques: Avoiding impingement risk with training changes.

OBJECTIVES: Overhead athletic activities and scapula dyskinesia are linked with shoulder pathology; pull-ups are a common training method for some overhead sports. Different pull-up techniques exist: anecdotally some are easier to perform, and others linked to greater incidences of pathology. This study aims to quantify scapular kinematics and external forces for three pull-up techniques, thus discussing potential injury implications. DESIGN: An observational study was performed with eleven participants (age=26.8±2.4 years) who regularly perform pull-ups. METHODS: The upward motions of three pull-up techniques were analysed: palms facing anterior, palms facing posterior and wide-grip. A skin-fixed scapula tracking technique with attached retro-reflective markers was used. RESULTS: High intra-participant repeatability was observed: mean coefficients of multiple correlations of 0.87-1.00 in humerothoracic rotations and 0.77-0.90 for scapulothoracic rotations. Standard deviations of hand force was low: <5% body weight. Significantly different patterns of humerothoracic, scapulothoracic and glenohumeral kinematics were observed between the pull-up techniques. The reverse technique has extreme glenohumeral internal-external rotation and large deviation from the scapula plane. The wide technique has a reduced range of pro/retraction in the same HT plane of elevation and 90° of arm abduction with 45° external rotation was observed. All these factors suggest increased sub-acromial impingement risk. CONCLUSIONS: The scapula tracking technique showed high repeatability. High arm elevation during pull-ups reduces sub-acromial space and increases pressure, increasing the risk of impingement injury. Wide and reverse pull-ups demonstrate kinematics patterns linked with increased impingement risk. Weight-assisted front pull-ups require further investigation and could be recommended for weaker participants.

Shoulder muscle forces during driving: Sudden steering can load the rotator cuff beyond its repair limit.

BACKGROUND: Driving is one of the most common everyday tasks and the rotator cuff muscles are the primary shoulder stabilisers. Muscle forces during driving are not currently known, yet knowledge of these would influence important clinical advice such as return to activities after surgery. The aim of this study is to quantify shoulder and rotator cuff muscle forces during driving in different postures. METHODS: A musculoskeletal modelling approach is taken, using a modified driving simulator in combination with an upper limb musculoskeletal model (UK National Shoulder Model). Motion data and external force vectors were model inputs and upper limb muscle and joint forces were the outputs. FINDINGS: Comparisons of the predicted glenohumeral joint forces were compared to in vivo literature values, with good agreement demonstrated (61 SD 8% body weight mean peak compared to 60 SD 1% body weight mean peak). High muscle activation was predicted in the rotator cuff muscles; particularly supraspinatus (mean 55% of the maximum and up to 164 SD 27 N). This level of loading is up to 72% of mean failure strength for supraspinatus repairs, and could therefore be dangerous for some cases. Statistically significant and large differences are shown to exist in the joint and muscle forces for different driving positions as well as steering with one or both hands (up to 46% body weight glenohumeral joint force). INTERPRETATION: These conclusions should be a key consideration in rehabilitating the shoulder after surgery, preventing specific upper limb injuries and predicting return to driving recommendations.

Scaling and kinematics optimisation of the scapula and thorax in upper limb musculoskeletal models.

Accurate representation of individual scapula kinematics and subject geometries is vital in musculoskeletal models applied to upper limb pathology and performance. In applying individual kinematics to a model's cadaveric geometry, model constraints are commonly prescriptive. These rely on thorax scaling to effectively define the scapula's path but do not consider the area underneath the scapula in scaling, and assume a fixed conoid ligament length. These constraints may not allow continuous solutions or close agreement with directly measured kinematics. A novel method is presented to scale the thorax based on palpated scapula landmarks. The scapula and clavicle kinematics are optimised with the constraint that the scapula medial border does not penetrate the thorax. Conoid ligament length is not used as a constraint. This method is simulated in the UK National Shoulder Model and compared to four other methods, including the standard technique, during three pull-up techniques (n=11). These are high-performance activities covering a large range of motion. Model solutions without substantial jumps in the joint kinematics data were improved from 23% of trials with the standard method, to 100% of trials with the new method. Agreement with measured kinematics was significantly improved (more than 10° closer at p<0.001) when compared to standard methods. The removal of the conoid ligament constraint and the novel thorax scaling correction factor were shown to be key. Separation of the medial border of the scapula from the thorax was large, although this may be physiologically correct due to the high loads and high arm elevation angles.

The influence of extreme speeds on scapula kinematics and the importance of controlling the plane of elevation.

BACKGROUND: The effect of high-speed movement on scapula kinematics is not clear from the literature. Understanding these effects is important for clinicians examining, managing and understanding scapula kinematic pathologies: impingement, glenohumeral instability, muscle patterning instability and athletic injuries. The scapula tracking methodology and the lack of quantified control of the movement's plane of elevation limits previous studies. The aim of the present study is to use improved dynamic scapula kinematic measurement to assess differences during planar movements across different speeds. Athletic and maximal speeds, neglected in previous studies, are the focus. METHODS: Thirteen subjects performed slow, fast and maximal scapula plane abduction and forward flexion. A previously validated skin-fixed scapula tracker was used and optimally calibrated. A stiff board controlled the plane of elevation. Scapula kinematics were consistent with the literature. FINDINGS: Large and statistically significant differences were found to exist between scapula kinematics at slow speeds compared to fast and maximal speeds in lateral rotation and protraction. Although some differences were observed in the plane of elevation between speeds, these were not considered to effect the conclusions. INTERPRETATION: The speed of movement should be considered an important factor affecting scapula kinematics. Clinical studies analysing muscle recruitment strategies and causes of injury in athletic tasks must account for changing kinematics rather than extrapolating slow or static measures and effective clinical examination and management of pathology must take these kinematic changes into account. Control of the plane of movement is challenging and its effectiveness must be quantified in future kinematic studies.

Musculoskeletal shoulder models: a technical review and proposals for research foci.

Musculoskeletal shoulder models allow non-invasive prediction of parameters that cannot be measured, particularly the loading applied to morphological structures and neurological control. This insight improves treatment and avoidance of pathology and performance evaluation and optimisation. A lack of appropriate validation and knowledge of model parameters' accuracy may cause reduced clinical success for these models. Instrumented implants have recently been used to validate musculoskeletal models, adding important information to the literature. This development along with increasing prevalence of shoulder models necessitates a fresh review of available models and their utility. The practical uses of models are described. Accuracy of model inputs, modelling techniques and model sensitivity is the main technical review undertaken. Collection and comparison of these parameters are vital to understanding disagreement between model outputs. Trends in shoulder modelling are highlighted: validation through instrumented prostheses, increasing openness and strictly constrained, optimised, measured kinematics. Future directions are recommended: validation through focus on model sub-sections, increased subject specificity with imaging techniques determining muscle and body segment parameters and through different scaling and kinematics optimisation approaches.

Skin-fixed scapula trackers: a comparison of two dynamic methods across a range of calibration positions.

The aim of this study was to establish the optimal methodology for skin-fixed measurement of the scapula during dynamic movement. This was achieved by comparing an optimally positioned Scapula Tracker device (ST) to a previously described palpation device, taken as the true measure of scapular kinematics. These measurements were compared across a range of calibration positions, including the use of multiple calibration positions for a single movement, in order to establish an optimal calibration approach. Ten subjects' scapular motion was measured using this ST and a previously described Acromial Method (AM). The two datasets were compared at a standard, an optimal and a 'multiple' calibration position, thus allowing a direct comparison between two common skin-fixed methods to track the bony kinematics of the scapula across different calibration positions. A comparison was also made with a bone-fixed technique from the literature. At both the standard and optimal calibration positions the ST was shown to be the more accurate measure of internal rotation and posterior tilt, particularly above 100° of humerothoracic elevation. The ST errors were found to be acceptable in relation to clinically important levels. Calibration positions have been shown to have a significant effect on the errors of both skin-fixed measurement techniques and therefore the importance of correct calibration is highlighted. It has thus been shown that a ST can be used to accurately quantify scapular motion when appropriately calibrated for the range of motion being measured.