RESUMEN
Improvement of nutritional value and reduction of antinutritional factors (ANFs) of soybean meal (SBM) for animal feed applications could be achieved by using bromelain immobilized onto bentonite (Bt)-carboxymethylcellulose (CMC) composites. The composite with mass ratio between CMC to calcium ion (Ca2+) at 1:20 provided the highest enzyme activity, immobilization yield higher than 95%, with superior thermal and storage stabilities. Performance of the immobilized bromelain for soybean protein hydrolysis was further studied. The results showed that at 60 °C, the immobilized bromelain exhibited the highest efficiency in enzymatic hydrolysis to release free alpha amino nitrogen (FAN) as a product with high selectivity and to effectively reduce SBM allergenic proteins within 30 min. In conclusion, immobilization of bromelain onto Bt-CMC composites leads to stability enhancement of the enzyme, enabling effective improvement in SBM quality in a short treatment time and showing great potential for application in animal feed industries.
Asunto(s)
Bromelaínas , Carboximetilcelulosa de Sodio , Enzimas Inmovilizadas , Glycine max , Ensayo de Materiales , Valor Nutritivo , Glycine max/química , Carboximetilcelulosa de Sodio/química , Bromelaínas/química , Enzimas Inmovilizadas/química , Enzimas Inmovilizadas/metabolismo , Arcilla/química , Tamaño de la Partícula , Materiales Biocompatibles/química , HidrólisisRESUMEN
This study presents the successful development of printable-microencapsulated ascorbic acid (AA) for personalized topical delivery using laser printing technology. Rice flour with a 10% AA content was selected as an encapsulation material. Hydrophobic nanosilica was used to create negative electrostatic charges on the microencapsulated surfaces via a high-speed mixture. This process facilitated the microencapsulated AA fabrication using a commercial laser printer and produced a well-patterned design with some minor print defects, such as banding and scattering. The amount of encapsulated AA per area was 0.28 mg/cm2, and the RGB color code was 0,0,0. An emulsion carrier system comprising pentylene glycol (P5G) or diethylene glycol monoethyl ether (DEGEE), Tween 20, oleic acid, and deionized (DI) water at a ratio of 20:30:30:20 was developed to enhance AA transmission into the skin. The Franz diffusion cell technique was used to investigate topical absorption on Strat-M membranes using P5G and DEGEE as enhancers. The steady-state fluxes were 8.40 (±0.64) and 10.04 (±0.58) µg/h/cm2 for P5G and DEGEE, respectively. Cytotoxicity tests conducted on fibroblast cells revealed low cytotoxicity for the encapsulation products and carriers.
Asunto(s)
Ácido Ascórbico , Piel , Ácido Ascórbico/farmacología , Ácido Ascórbico/metabolismo , Piel/metabolismoRESUMEN
The effect of SiO2-layer thickness in SiO2-coated nano zero-valent iron (nZVI) particles on the reactivity characteristics of iodoacetamide (IAcAm) degradation was evaluated. SiO2-layer thicknesses ranging from 3.6 to 27.3 nm were obtained through varying tetraethyl orthosilicate dosages of 0.001-1 M. The crystallinity, surface chemical composition, and physicochemical properties were evaluated for their effects on synergetic degradation mechanisms, dehalogenation, hydrolysis, and adsorption. At a thickness of 3.6 nm, the SiO2 layer offered the highest observed pseudo-first-order rate (kobs) and higher rates of IAcAm degradation were maintained under pH fluctuations (pH 5-7) and aerobic conditions compared to pristine nZVI. At this SiO2-layer thickness (3.6 nm), the rate of iron oxide-layer formation was reduced and the migration of reactive iron species (Fe0 and Fe2+) for the dehalogenation and hydrolysis reactions was enabled. In a single-solute solution, IAcAm elimination was greater than bromoacetamide and chloroacetamide elimination due to the weak ionic I-C bond. In mixed solute conditions, the hydrophobicity of chloroacetamide played a more significant role in competitive degradation through greater adsorption. The proportion of dehalogenation relative to hydrolysis during IAcAm degradation by pristine nZVI and SiO2-coated nZVI was approximately 0.6:0.4. Iodoacetic acid and acetic acid were detected as intermediates in the degradation pathway of IAcAm by pristine nZVI. In contrast, the SiO2 layer on nZVI can accelerate the transformation of IAcAm to acetamide and iodoacetic acid. The electrolyte background of tap water exhibited a slight inhibitory effect on the degradation of IAcAm for both nZVI and SiO2-coated nZVI.
Asunto(s)
Hierro , Contaminantes Químicos del Agua , Adsorción , Hidrólisis , Yodoacetamida , Dióxido de Silicio , Contaminantes Químicos del Agua/análisisRESUMEN
In this study, we customized magnetic sorbents by functionalizing silica coated magnetite with octadecyl(C18)silane (Fe3O4@SiO2@C18). This sorbent was intended for the determination of trace orthophosphate (o-PO43-) in unpolluted freshwater samples. The o-PO43- was transformed to phosphomolybdenum blue (PMB), a known polyoxometalate ion. Then the PMB were coupled with cetyl trimethyl ammonium bromide (CTAB), cationic surfactant, in order to hydrophobically bound with the Fe3O4@SiO2@C18 particles through dispersive magnetic solid-phase extraction (d-MSPE) as part of sample preconcentration. The PMB-CTAB-magnetic particles are simply separated from the aqueous solution by the external magnet. The acidified ethanol 0.5 mL was used as PMB-CTAB eluent to produce an intense blue solution, which the absorbance was measured using a UV-Vis spectrophotometer at 800 nm. The proposed method (employing 2 mg of Fe3O4@SiO2@C18) yielded an enhancement factor of 32 with a linear range of 1.0-30.0 µg P L-1. Precision at 6.0 µg P L-1 and 25.0 µg P L-1 were 3.70 and 2.49% (RSD, n = 6) respectively. The lower detection limit of 0.3 µg P L-1 and quantification limit of 1.0 µg P L-1 allowed trace levels analysis of o-PO43- in samples. The reliability and accuracy of the proposed method were confirmed by using a certified reference material. Our method offers highly sensitive detection of o-PO43- with simple procedures that can be operated at room temperature and short analysis time.
RESUMEN
Photophysical properties for excited-state intramolecular proton transfer (ESIPT) reaction of N-salicylidene-o-aminophenol (SA) Schiff base were comprehensively studied based on experimental methods combined with theoretical calculations. The results revealed that the SA was mainly presented in enol form in acidic solutions while it was predominantly existed in keto form in basic solutions. From UV-vis absorption and fluorescence emission studies, it showed that the ESIPT could effectively take place in non-polar and aprotic polar solvents. By using the CAM-B3LYP/6-311G(d,p) level of theory, it was found that the intramolecular proton transfer could preferably occur through six-membered ring transition rather than through five-membered ring transition. The dynamics of the ESIPT reactions of enol and keto tautomers were studied using TD-CAM-B3LYP with 6-311G(d,p) basis set. The potential energy curves for the intramolecular proton transfer in the ground (GSIPT) and excited state (ESIPT) exhibited that the GSIPT could occur through a low activation barrier, whereas in the case of ESIPT, the process could arise via low energy barrier.
RESUMEN
Under a layer of 0.1 M HCl in isopropanol, soft ultraviolet (UV) (365 nm) photolysis of the thiol-on-gold self-assembled monolayer (SAM) derived from the lipoic acid ester of α-hydroxy-1-acetylpyrene results in the expected removal of the acetylpyrene protecting group. When photolyzing through a mask, this can be used to produce a patterned surface and, at a controlled electrochemical potential, it is then possible to selectively and reversibly electrodeposit copper on the photolyzed regions. Rather surprisingly, under these photolysis conditions, there is not only the expected photodeprotection of the ester but also partial removal of the lipoic acid layer which has been formed. In further studies, it is shown that this type of acid-catalyzed photoremoval of SAM layers by soft UV is a rather general phenomenon and results in the partial removal of the thiol-on-gold SAM layers derived from other ω-thiolated carboxylic acids. However, this phenomenon is chain-length dependent. Under conditions in which there is a â¼60% reduction in the thickness of the SAM derived from dithiobutyric acid, the SAM derived from mercaptoundecanoic acid is almost unaffected. The process by which the shorter-chain SAM layers are partially removed is not fully understood because these compounds do not absorb significantly in the 365 nm region of the spectrum! Significantly, this study shows that acid catalysis photolysis of thiol-on-gold SAMs needs to be used with caution.
RESUMEN
We report on the development of novel cyano-biphenyl-based thiolate self-assembled monolayers designed to promote homeotropic alignment of calamitic liquid crystals. The molecules developed contain an ortho-nitrobenzyl protected carboxylic acid group that on irradiation by soft UV (365 nm) is cleaved to yield carboxylic acid groups exposed at the surface that promote planar alignment. Using a combination of wetting, X-ray photoelectron spectroscopy, Fourier transform-infrared reflection absorption spectroscopy, and ellipsometry we show that high photolysis yields (>90%) can be achieved and that the patterned SAMs are suitable for the controlled alignment of calamitic liquid crystals. This study further shows that such photo-patterned SAMs can be used to control the formation of focal conic domains (FCDs) in the smectic-A phase in terms of positioning and size confinement on surfaces.