Pharmacokinetic control of orally dosed cyclosporine A with mucosal drug delivery system.

This study aimed to control the oral absorption of cyclosporine A (CsA) with the use of a mucosal drug delivery system (mDDS). Mucopenetrating nanocarriers (MP/NCs) and mucoadhesive nanocarriers (MA/NCs) were prepared by flash nanoprecipitation employing polystyrene-block-poly(ethylene glycol) and polystyrene-block-poly(N,N-dimethyl aminoethyl methacrylate), respectively. Their particle distribution in the rat gastrointestinal tract were visualized by fluorescent imaging. Plasma concentrations were monitored after oral administration of CsA-loaded MP/NCs (MP/CsA) and MA/NCs (MA/CsA) to rats. MP/NCs and MA/NCs had a particle size below 200 nm and ζ-potentials of 4 and 40 mV, respectively. The results from in vitro experiments demonstrated mucopenetration of MP/NCs and mucoadhesion of MA/NCs. Confocal laser scanning microscopic images showed diffusion of MP/NCs in the gastrointestinal mucus towards epithelial cells and localization of MA/NCs on the surface of the gastrointestinal mucus layer. In a pH 6.8 solution, rapid and sustained release of CsA were observed for MP/CsA and MA/CsA, respectively. After oral dosing (10 mg-CsA/kg) to rats, amorphous CsA powder exhibited a time to maximum plasma concentration (Tmax) of 3.4 h, maximum plasma concentration (Cmax) of 0.12 µg/mL, and bioavailability of 0.7%. Compared with amorphous CsA powder, MP/CsA shortened Tmax by 1.1 to 2.3 h and increased the bioavailability by 43-fold to 30.1%, while MA/CsA prolonged Tmax by 3.4 to 6.8 h with Cmax and bioavailability of 0.65 µg/mL and 11.7%, respectively. These pharmacokinetic behaviors would be explained by their diffusion and release properties modulated by polymeric surface modification. The mDDS approach is a promising strategy for the pharmacokinetic control of orally administered CsA.

Stabilized Astaxanthin Nanoparticles Developed Using Flash Nanoprecipitation to Improve Oral Bioavailability and Hepatoprotective Effects.

In this study, we developed stabilized astaxanthin (AX) nanoparticles (sNP/AX) to improve the physicochemical properties, oral bioavailability, and hepatoprotection of AX. A flash nanoprecipitation technique was used with a multi-inlet vortex mixer to prepare the sNP/AX. Vitamins E (VE) and C (VC) were used as co-stabilizers with poloxamer 407 as a stabilizer to inhibit the oxidative degradation of AX during sNP/AX formation and storage. VC stabilized AX in the aqueous phase during the preparation, whereas VE markedly improved the storage stability of sNP/AX, as evidenced by the AX contents remaining at 94 and 81% after 12 weeks of storage at 4 °C and 25 °C, respectively. The mean sNP/AX diameter was 215 nm, which resulted in higher AX release properties than those of crystalline AX. Rats, orally administered sNP/AX (33.2 mg AX/kg), exhibited higher systemic exposure to AX, whereas oral absorption in the crystalline AX group was negligible. In the rat hepatic injury model, oral pretreatment with sNP/AX (33.2 mg AX/kg) markedly attenuated hepatic damage, as shown by the histopathological analysis and reduced levels of plasma biomarkers for hepatic injury. These findings suggest that strategically including antioxidative additives in the sNP/AX has the potential to improve the physicochemical and nutraceutical properties of AX.

Formulation and Scale-up of Delamanid Nanoparticles via Emulsification for Oral Tuberculosis Treatment.

Delamanid (DLM) is a hydrophobic small molecule therapeutic used to treat drug-resistant tuberculosis (DR-TB). Due to its hydrophobicity and resulting poor aqueous solubility, formulation strategies such as amorphous solid dispersions (ASDs) have been investigated to enhance its aqueous dissolution kinetics and thereby improve oral bioavailability. However, ASD formulations are susceptible to temperature- and humidity-induced phase separation and recrystallization under harsh storage conditions typically encountered in areas with high tuberculosis incidence. Nanoencapsulation represents an alternative formulation strategy to increase aqueous dissolution kinetics while remaining stable at elevated temperature and humidity. The stabilizer layer coating the nanoparticle drug core limits the formation of large drug domains by diffusion during storage, representing an advantage over ASDs. Initial attempts to form DLM-loaded nanoparticles via precipitation-driven self-assembly were unsuccessful, as the trifluoromethyl and nitro functional groups present on DLM were thought to interfere with surface stabilizer attachment. Therefore, in this work, we investigated the nanoencapsulation of DLM via emulsification, avoiding the formation of a solid drug core and instead keeping DLM dissolved in a dichloromethane dispersed phase during nanoparticle formation. Initial emulsion formulation screening by probe-tip ultrasonication revealed that a 1:1 mass ratio of lecithin and HPMC stabilizers formed 250 nm size-stable emulsion droplets with 40% DLM loading. Scale-up studies were performed to produce nearly identical droplet size distribution at larger scale using high-pressure homogenization, a continuous and industrially scalable technique. The resulting emulsions were spray-dried to form a dried powder, and in vitro dissolution studies showed dramatically enhanced dissolution kinetics compared to both as-received crystalline DLM and micronized crystalline DLM, owing to the increased specific surface area and partially amorphous character of the DLM-loaded nanoparticles. Solid-state NMR and dissolution studies showed good physical stability of the emulsion powders during accelerated stability testing (50 °C/75% RH, open vial).

Formulation and Scale-Up of Fast-Dissolving Lumefantrine Nanoparticles for Oral Malaria Therapy.

Lumefantrine (LMN) is one of the first-line drugs in the treatment of malaria due to its long circulation half-life, which results in enhanced effectiveness against drug-resistant strains of malaria. However, LMN's therapeutic efficacy is diminished due to its low bioavailability when dosed as a crystalline solid. The goal of this work was to produce low-cost, highly bioavailable, stable LMN powders for oral delivery that would be suitable for global health applications. We report the development of a LMN nanoparticle formulation and the translation of that formulation from laboratory to industrial scale. We applied Flash NanoPrecipitation (FNP) to develop nanoparticles with 90% LMN loading and sizes of 200-260 nm. The integrated process involves nanoparticle formation, concentration by tangential flow ultrafiltration, and then spray drying to obtain a dry powder. The final powders are readily redispersible and stable over accelerated aging conditions (50°C, 75% RH, open vial) for at least 4 weeks and give equivalent and fast drug release kinetics in both simulated fed and fasted state intestinal fluids, making them suitable for pediatric administration. The nanoparticle-based formulations increase the bioavailability of LMN 4.8-fold in vivo when compared to the control crystalline LMN. We describe the translation of the laboratory-scale process at Princeton University to the clinical manufacturing scale at WuXi AppTec.

Sequential Flash NanoPrecipitation for the scalable formulation of stable core-shell nanoparticles with core loadings up to 90.

Flash NanoPrecipitation (FNP) is a scalable, single-step process that uses rapid mixing to prepare nanoparticles with a hydrophobic core and amphiphilic stabilizing shell. Because the two steps of particle self-assembly - (1) core nucleation and growth and (2) adsorption of a stabilizing polymer onto the growing core surface - occur simultaneously during FNP, nanoparticles formulated at core loadings above approximately 70% typically exhibit poor stability or do not form at all. Additionally, a fundamental limit on the concentration of total solids that can be introduced into the FNP process has been reported previously. These limits are believed to share a common mechanism: entrainment of the stabilizing polymer into the growing particle core, leading to destabilization and aggregation. Here, we demonstrate a variation of FNP which separates the nucleation and stabilization steps of particle formation into separate sequential mixers. This scheme allows the hydrophobic core to nucleate and grow in the first mixing chamber unimpeded by adsorption of the stabilizing polymer, which is later introduced to the growing nuclei in the second mixer. Using this Sequential Flash NanoPrecipitation (SNaP) technique, we formulate stable nanoparticles with up to 90% core loading by mass and at 6-fold higher total input solids concentrations than typically reported.

Effects of the polymer glass transition on the stability of nanoparticle dispersions.

In addition to the repulsive and attractive interaction forces described by Derjaguin-Landau-Verwey-Overbeek (DLVO) theory, many charged colloid systems are stabilized by non-DLVO contributions stemming from specific material attributes. Here, we investigate non-DLVO contributions to the stability of polymer colloids stemming from the intra-particle glass transition temperature (Tg). Flash nanoprecipitation is used to fabricate nanoparticles (NPs) from a library of polymers and dispersion stability is studied in the presence of both hydrophilic and hydrophobic salts. When adding KCl, stability undergoes a discontinuous decrease as Tg increases above room temperature, indicating greater stability of rubbery NPs over glassy NPs. Glassy NPs are also found to interact strongly with hydrophobic phosphonium cations (PR4+), yielding charge inversion and intermediate aggregation while rubbery NPs resist ion adsorption. Differences in the lifetime of ionic structuration within mobile surface layers is presented as a potential mechanism underlying the observed phenomenon.

Rapid Precipitation of Ionomers for Stabilization of Polymeric Colloids.

Polymeric colloids have shown potential as "building blocks" in applications ranging from formulations of Pickering emulsions and drug delivery systems to advanced materials, including colloidal crystals and composites. However, for applications requiring tunable properties of charged colloids, obstacles in fabrication can arise through limitations in process scalability and chemical versatility. In this work, the capabilities of flash nanoprecipitation (FNP), a scalable nanoparticle (NP) fabrication technology, are expanded to produce charged polystyrene colloids using sulfonated polystyrene ionomers as a new class of NP stabilizers. Through experimental exploration of formulation parameters, increases in the ionomer content are shown to reduce the particle size, mitigating a significant trade-off between the final particle size and inlet concentration; thus, expanding the processable material throughput of FNP. Further, the degree of sulfonation is found to impact stabilization with optimal performance achieved by selecting ionomers with intermediate (2.45-5.2 mol %) sulfonation. Simulations of single ionomer chains and their arrangement in multicomponent NPs provide molecular insights into the assembly and structure of NPs wherein the partitioning of ionomers to the particle surface depends on the polymer molecular weight and degree of sulfonation. By combining the insights from simulations with diffusion-limited growth kinetics and parametric fits to experimental data, a simple design formulation relation is proposed and validated. This work highlights the potential of ionomer-based stabilizers for controllably producing charged NP dispersions in a scalable manner.

Formulation of pH-Responsive Methacrylate-Based Polyelectrolyte-Stabilized Nanoparticles for Applications in Drug Delivery.

pH-responsive polyelectrolytes, including methacrylate-based anionic copolymers (MACs), are widely used as enteric coatings and matrices in oral drug delivery. Despite their widespread use in these macroscopic applications, the molecular understanding of their use as stabilizers for nanoparticles (NPs) is lacking. Here, we investigate how MACs can be used to create NPs for therapeutic drug delivery and the role of MAC molecular properties on the assembly of NPs via flash nanoprecipitation. The NP size is tuned from 59 to 454 nm by changing the degree of neutralization, ionic strength, total mass concentration, and the core-to-MAC ratio. The NP size is determined by the volume of hydrophilic domains on the surface relative to the volume of hydrophobic domains in the core. We calculate the dimensions of the hydrophobic NP core relative to the thickness of the polyelectrolyte layer over a range of ionizations. Importantly, the results are shown to apply to both high-molecular-weight polymers as core materials and small-molecule drugs. The pH responsiveness of MAC-stabilized NPs is also demonstrated. Future development of polyelectrolyte copolymer-stabilized nanomedicines will benefit from the guiding principles established in this study.

Tuning Morphologies and Reactivities of Hybrid Organic-Inorganic Nanoparticles.

Hybrid nanoparticles (hNPs), or nanoparticles composed of both organic and inorganic components, hold promise for diverse energy and environmental applications due to their ability to stabilize reactive nanomaterials against aggregation, enhancing their ability to pervade tortuous spaces and travel long distances to degrade contaminants in situ. Past studies have investigated the use of polymer or surfactant coatings to stabilize nanomaterials against aggregation. However, fabrication of these materials often requires multiple steps and lacks specificity in the control of their morphologies and reactivities. Here, we demonstrated a method of producing stable hNPs with tunable morphologies by incubating polystyrene nanoparticles formed via Flash NanoPrecipitation with citrate-stabilized gold nanocatalysts. Using this simple fabrication technique, we found that gold adsorption to polystyrene nanoparticles was enabled by the presence of a good solvent for polystyrene. Furthermore, changing process parameters, such as gold incubation time, and molecular parameters, such as polymer molecular weight and end-group functionality, provided control over the resultant nanocatalyst loading and dispersal atop hNPs. We classified these morphologies into three distinct regimes─aggregated, dispersed, or internalized─and we showed that the emergence of these regimes has key implications for controlling reaction rates in applications such as heterogeneous catalysis or groundwater remediation. Specifically, we found that hNPs with gold nanocatalysts embedded below the surfaces of polystyrene nanoparticles exhibited slower bulk catalytic reduction capacity than their disperse, surface-decorated counterparts. Taken together, our work demonstrates a simple way by which hNPs can be fabricated and presents a method to control catalytic reactions using reactive nanomaterials.

Chemorepellent-Loaded Nanocarriers Promote Localized Interference of Escherichia coli Transport to Inhibit Biofilm Formation.

To mitigate antimicrobial resistance, we developed polymeric nanocarrier delivery of the chemorepellent signaling agent, nickel, to interfere with Escherichia coli transport to a surface, an incipient biofilm formation stage. The dynamics of nickel nanocarrier (Ni NC) chemorepellent release and induced chemorepellent response required to effectively modulate bacterial transport for biofilm prevention were characterized in this work. Ni NCs were fabricated with the established Flash NanoPrecipitation method. NC size was characterized with dynamic light scattering. Measured with a zincon monosodium salt colorimetric assay, NC nickel release was pH-dependent, with 62.5% of total encapsulated nickel released at pH 7 within 0-15 min, competitive with rapid E. coli transport to the surface. Confocal laser scanning microscopy of E. coli (GFP-expressing) biofilm growth dynamics on fluorescently labeled Ni NC coated glass coupled with a theoretical dynamical criterion probed the biofilm prevention outcomes of NC design. The Ni NC coating significantly reduced E. coli attachment compared to a soluble nickel coating and reduced E. coli biomass area by 61% compared to uncoated glass. A chemical-in-plug assay revealed Ni NCs induced a chemorepellent response in E. coli. A characteristic E. coli chemorepellent response was observed away from the Ni NC coated glass over 10 µm length scales effective to prevent incipient biofilm surface attachment. The dynamical criterion provided semiquantitative analysis of NC mechanisms to control biofilm and informed optimal chemorepellent release profiles to improve NC biofilm inhibition. This work is fundamental for dynamical informed design of biofilm-inhibiting chemorepellent-loaded NCs promising to mitigate the development of resistance and interfere with the transport of specific pathogens.

Sensors in a Flash! Oxygen Nanosensors for Microbial Metabolic Monitoring Synthesized by Flash Nanoprecipitation.

Flash nanoprecipitation (FNP) is an efficient and scalable nanoparticle synthesis method that has not previously been applied to nanosensor fabrication. Current nanosensor fabrication methods have traditionally exhibited poor replicability and consistency resulting in high batch-to-batch variability, highlighting the need for a more tunable and efficient method such as FNP. We used FNP to fabricate nanosensors to sense oxygen based on an oxygen-sensitive dye and a reference dye, as a tool for measuring microbial metabolism. We used fluorescence spectroscopy to optimize nanosensor formulations, calibrate the nanosensors for oxygen concentration determination, and measure oxygen concentrations through oxygen-sensitive dye luminescence. FNP provides an effective platform for making sensors capable of responding to oxygen concentration in gas-bubbled solutions as well as in microbial environments. The environments we tested the sensors in arePseudomonas aeruginosa biofilms andSaccharomyces cerevisiae liquid cultures─both settings where oxygen concentration is highly dependent on microbial activity. With FNP now applied to nanosensor fabrication, future nanosensor applications can take advantage of improved product quality through better replicability and consistency while maintaining the original function of the nanosensor.

Hysteresis in the thermally induced phase transition of cellulose ethers.

Functionalized cellulosics have shown promise as naturally derived thermoresponsive gelling agents. However, the dynamics of thermally induced phase transitions of these polymers at the lower critical solution temperature (LCST) are not fully understood. Here, with experiments and theoretical considerations, we address how molecular architecture dictates the mechanisms and dynamics of phase transitions for cellulose ethers. Above the LCST, we show that hydroxypropyl substituents favor the spontaneous formation of liquid droplets, whereas methyl substituents induce fibril formation through diffusive growth. In celluloses which contain both methyl and hydroxypropyl substituents, fibrillation initiates after liquid droplet formation, suppressing the fibril growth to a sub-diffusive rate. Unlike for liquid droplets, the dissolution of fibrils back into the solvated state occurs with significant thermal hysteresis. We tune this hysteresis by altering the content of substituted hydroxypropyl moieties. This work provides a systematic study to decouple competing mechanisms during the phase transition of multi-functionalized macromolecules.

Development of an In Vitro Release Assay for Low-Density Cannabidiol Nanoparticles Prepared by Flash NanoPrecipitation.

Nanoparticle encapsulation is an attractive approach to improve the oral bioavailability of hydrophobic therapeutics. The high specific surface area of nanoparticle formulations, combined with the thermodynamically driven increased solubility of an amorphous drug core, promotes rapid drug dissolution. However, the physicochemical properties of the hydrophobic therapeutic can present obstacles to in vitro characterization of nanoparticle formulations. Namely, drugs with low density and high membrane binding affinity frustrate traditional analytical methods to monitor release kinetics from nanoparticles. In this work, cannabidiol (CBD) was encapsulated into nanoparticles with low polydispersity and high drug loading via Flash NanoPrecipitation (FNP), a scalable self-assembly process. Hydroxypropyl methylcellulose acetate succinate (HPMCAS) and lecithin were employed as amphiphilic particle stabilizers during the FNP process. However, the low density and high membrane binding affinity of the amorphous CBD nanoparticle core prevented the characterization of in vitro release kinetics by conventional methods. Released CBD could not be separated from intact nanoparticles by filtration or centrifugation. To address this challenge, an alternative approach is described to coencapsulate 6 nm hydrophobic Fe3O4 colloids with CBD during FNP. The Fe3O4 colloids were added at 33% by mass (approximately 20% by volume) to increase the density of the nanoparticles, resulting in particles with an average diameter of 160 nm (CBD-lecithin-Fe3O4) or 280 nm (CBD-HPMCAS-Fe3O4). This densification enabled the centrifugal separation of dissolved (released) CBD from unreleased CBD during the in vitro assay while avoiding the losses associated with a filtration step. The resulting nanoparticle formulations provided more rapid and complete in vitro dissolution kinetics than bulk CBD, representing a 6-fold improvement in dissolution compared to crystalline CBD. The coencapsulation of high-density Fe3O4 colloids to enable the separation of nanoparticles from release media is a novel approach to measuring in vitro release kinetics of nanoencapsulated low-density, hydrophobic drug molecules.

Small-volume in vitro lipid digestion measurements for assessing drug dissolution in lipid-based formulations using SAXS.

Lipid-based formulations improve the absorption capacity of poorly-water-soluble drugs and digestion of the formulation is a critical step in that absorption process. A recent approach to understanding the propensity for drug to dissolve in digesting lipid-based formulations couples an in vitro pH-stat lipolysis model to small-angle X-ray scattering (SAXS) by means of a flow-through capillary. However, the conventional pH-stat apparatus used to measure the extent of lipid digestion during such experiments requires digest volumes of 15-30 mL and drug doses of 50-200 mg, which is problematic for scarce compounds and can require excessive amounts of formulation reagents. This manuscript describes an approach to reduce the amount of material required for in vitro lipolysis experiments coupled to SAXS, for use in instances where the amount of drug or formulation medium is limited. Importantly, this was achieved while maintaining the pH stat conditions, which is critical for maintaining biorelevance and driving digestion to completion. The digestibility of infant formula with the poorly-water-soluble drugs halofantrine and clofazimine dispersed into it was measured as an exemplar paediatric-friendly lipid formulation. Halofantrine was incorporated in its powdered free base form and clofazimine was incorporated both as unformulated drug powder and as drug in nanoparticulate form prepared using Flash NanoPrecipitation. The fraction of triglyceride digested was found to be independent of vessel size and the incorporation of drug. The dissolution of the two forms of clofazimine during the digestion of infant formula were then measured using synchrotron SAXS, which revealed complete and partial solubilisation over 30 min of digestion for the powdered drug and nanoparticle formulations, respectively. The main challenge in reducing the volume of the measurements was in ensuring that thorough mixing was occurring in the smaller digestion vessel to provide uniform sampling of the dispersion medium.

Clofazimine-Loaded Mucoadhesive Nanoparticles Prepared by Flash Nanoprecipitation for Strategic Intestinal Delivery.

PURPOSE: This study was undertaken to develop novel mucoadhesive formulations of clofazimine (CFZ), a drug candidate for the treatment of cryptosporidiosis, with the aim of strategic delivery to the small intestine, the main site of the disease parasites. METHODS: CFZ-loaded nanoparticles (nCFZ) coated with non-biodegradable anionic polymer (nCFZ/A) and biodegradable anionic protein complex (nCFZ/dA) were prepared by Flash NanoPrecipitation (FNP) and evaluated for their physicochemical and biopharmaceutical properties. RESULTS: The mean diameters of nCFZ/A and nCFZ/dA were ca. 90 and 240 nm, respectively, and they showed narrow size distributions and negative ζ-potentials. Both formulations showed higher solubility of CFZ in aqueous solution than crystalline CFZ. Despite their improved dispersion behaviors, both formulations exhibited significantly lower diffusiveness than crystalline CFZ in a diffusion test using artificial mucus (AM). Quartz crystal microbalance analysis showed that both formulations clearly interacted with mucin, which appeared to be responsible for their reduced diffusiveness in AM. These results suggest the potent mucoadhesion of nCFZ/A and nCFZ/dA. After the oral administration of CFZ samples (10 mg-CFZ/kg) to rats, nCFZ/dA and nCFZ/A exhibited a prolongation in Tmax by 2 and >9 h, respectively, compared with crystalline CFZ. At 24 h after oral doses of nCFZ/A and nCFZ/dA with mucoadhesion, there were marked increases in the intestinal CFZ concentration (4-7 fold) compared with Lamprene®, a commercial CFZ product, indicating enhanced CFZ exposure in the small intestine. CONCLUSION: The use of FNP may produce mucoadhesive CFZ formulations with improved intestinal exposure, possibly offering enhanced anti-cryptosporidium therapy.

Tween® Preserves Enzyme Activity and Stability in PLGA Nanoparticles.

Enzymes, as natural and potentially long-term treatment options, have become one of the most sought-after pharmaceutical molecules to be delivered with nanoparticles (NPs); however, their instability during formulation often leads to underwhelming results. Various molecules, including the Tween® polysorbate series, have demonstrated enzyme activity protection but are often used uncontrolled without optimization. Here, poly(lactic-co-glycolic) acid (PLGA) NPs loaded with ß-glucosidase (ß-Glu) solutions containing Tween® 20, 60, or 80 were compared. Mixing the enzyme with Tween® pre-formulation had no effect on particle size or physical characteristics, but increased the amount of enzyme loaded. More importantly, NPs made with Tween® 20:enzyme solutions maintained significantly higher enzyme activity. Therefore, Tween® 20:enzyme solutions ranging from 60:1 to 2419:1 mol:mol were further analyzed. Isothermal titration calorimetry analysis demonstrated low affinity and unquantifiable binding between Tween® 20 and ß-Glu. Incorporating these solutions in NPs showed no effect on size, zeta potential, or morphology. The amount of enzyme and Tween® 20 in the NPs was constant for all samples, but a trend towards higher activity with higher molar rapports of Tween® 20:ß-Glu was observed. Finally, a burst release from NPs in the first hour with Tween®:ß-Glu solutions was the same as free enzyme, but the enzyme remained active longer in solution. These results highlight the importance of stabilizers during NP formulation and how optimizing their use to stabilize an enzyme can help researchers design more efficient and effective enzyme loaded NPs.

Microfluidic Technology for the Production of Hybrid Nanomedicines.

Microfluidic technologies have recently been applied as innovative methods for the production of a variety of nanomedicines (NMeds), demonstrating their potential on a global scale. The capacity to precisely control variables, such as the flow rate ratio, temperature, total flow rate, etc., allows for greater tunability of the NMed systems that are more standardized and automated than the ones obtained by well-known benchtop protocols. However, it is a crucial aspect to be able to obtain NMeds with the same characteristics of the previously optimized ones. In this study, we focused on the transfer of a production protocol for hybrid NMeds (H-NMeds) consisting of PLGA, Cholesterol, and Pluronic® F68 from a benchtop nanoprecipitation method to a microfluidic device. For this aim, we modified parameters such as the flow rate ratio, the concentration of core materials in the organic phase, and the ratio between PLGA and Cholesterol in the feeding organic phase. Outputs analysed were the chemico-physical properties, such as size, PDI, and surface charge, the composition in terms of %Cholesterol and residual %Pluronic® F68, their stability to lyophilization, and the morphology via atomic force and electron microscopy. On the basis of the results, even if microfluidic technology is one of the unique procedures to obtain industrial production of NMeds, we demonstrated that the translation from a benchtop method to a microfluidic one is not a simple transfer of already established parameters, with several variables to be taken into account and to be optimized.

Processing Chitosan for Preparing Chitosan-Functionalized Nanoparticles by Polyelectrolyte Adsorption.

Chitosan-coated nanoparticles are a promising class of drug delivery vehicles that have been studied as tools for improving the gastrointestinal delivery of therapeutics. Here we present an analysis of chitosan-coated nanoparticles with an emphasis on characterizing the chitosan polymer properties. Cationic nanoparticles are produced by adsorbing a layer of chitosan HCl on an anionic (-40 mV ζ-potential) polyacrylic acid (PAA) coated primary nanoparticle. Commercially available chitosan (90% deacetylated) must be processed into a nearly completely deacetylated HCl salt form (99% deacetylation); otherwise, primary nanoparticle aggregation occurs. Deacetylated chitosan HCl produces stable, cationic (+35 mV ζ-potential) nanoparticles within 10% of the original anionic particle hydrodynamic diameter at a 1:2 molar ratio of chitosan glucosamine HCl monomers to PAA acrylic acid monomers.

Transient Electric Birefringence of Linear and Circular DNA: A Comparison of Kinetic Theory Predictions.

The use of monodisperse DNA and restriction enzyme modification allows the preparation of model samples of polymer rings and linear chains with a precision that is not possible by conventional synthetic routes. These samples allow direct comparisons of the predictions of polymer kinetic theories. Transient electric birefringence allows rapid imposition or forces (∼100 ns) and monitoring of conformational changes (∼0.7 µs). We determined the relaxation spectra of once-cut linear ΦX-174 (5386 bp), twice-cut linear ΦX-174 (2693 bp), and relaxed ring (5386 bp) ΦX-174 with transient electric birefringence. This allows comparison of the relaxation dynamics of a linear chain and a polymer loop with exactly the same contour length. The relaxed loop and the twice-cut DNA had the longest relaxation times of 1039 and 1076 µs, respectively. The loop was measured both in the native supercoiled state and in the relaxed state. We found the birefringence decayed in agreement with bead-spring (Rouse/Zimm) models for polymer dynamics determined by both a model-independent average relaxation time and deconvolution of the decay into a sum of exponentials. Deconvolution was performed by CONTIN and by the Padé-Laplace method. For both the relaxed ring and the linear fragments, we found the longer time constants τ1 and τ2 were discrete and had a spacing that was in agreement with the Rouse model without hydrodynamic interaction (τ1/τ2 = 0.25), which would be expected for a chain with 20 statistical segments. The excitation of higher relaxation modes could be observed as the electric field pulse length increased.

Nanoparticle size distribution quantification from transmission electron microscopy (TEM) of ruthenium tetroxide stained polymeric nanoparticles.

HYPOTHESIS: Dynamic Light Scattering (DLS) generated particle size distributions (PSD) of polymer-stabilized nanoparticles are dependent on the optimization parameters used to generate an inversion solution fit to the measured autocorrelation function. The accuracy of the DLS PSD average and polydispersity can be determined by comparing analyzed Transmission Electron Microscopy (TEM) images with the DLS results if the TEM measured sizes can be corrected for the thickness of the hydrated polymer corona that impacts particle hydrodynamics but is a collapsed, desiccated shell in the TEM images. EXPERIMENTS: Nanoparticles were prepared by Flash NanoPrecipitation with either poly(ethylene glycol) (PEG) or hydroxypropyl methylcellulose acetate succinate (HPMCAS) stabilizing polymers. Solvated nanoparticle size distributions were measured by DLS in aqueous media. The same nanoparticle dispersions were lyophilized onto TEM grids and stained by ruthenium tetroxide (RuO4) vapor to improve electron contrast. Desiccated particle size distributions were generated by measuring a minimum of 300 particle diameters in the stained TEM images. FINDINGS: Using our protocol for staining soft matter nanoparticles in TEM measurements, we have quantitatively analyzed the correlation between DLS and TEM generated PSDs. Average diameters disagree by the hydrated polymer corona thickness for each stabilizer due to the high-vacuum TEM environment, with 21.4 nm for PEG and 51.2 nm for HPMCAS. While corrected average diameter agrees within 10% for each technique, DLS consistently over-estimates the standard deviation of the PSD by 100% compared to the TEM measurement.