Dissipative Kerr soliton generation at 2µm in a silicon nitride microresonator.

Chip-scale optical frequency combs enable the generation of highly-coherent pulsed light at gigahertz-level repetition rates, with potential technological impact ranging from telecommunications to sensing and spectroscopy. In combination with techniques such as dual-comb spectroscopy, their utilization would be particularly beneficial for sensing of molecular species in the mid-infrared spectrum, in an integrated fashion. However, few demonstrations of direct microcomb generation within this spectral region have been showcased so far. In this work, we report the generation of Kerr soliton microcombs in silicon nitride integrated photonics. Leveraging a high-Q silicon nitride microresonator, our device achieves soliton generation under milliwatt-level pumping at 1.97 µm, with a generated spectrum encompassing a 422 nm bandwidth and extending up to 2.25 µm. The use of a dual pumping scheme allows reliable access to several comb states, including primary combs, modulation instability combs, as well as multi- and single-soliton states, the latter exhibiting high stability and low phase noise. Our work extends the domain of silicon nitride based Kerr microcombs towards the mid-infrared using accessible factory-grade technology and lays the foundations for the realization of fully integrated mid-infrared comb sources.

Parity-time symmetry enabled ultra-efficient nonlinear optical signal processing.

Nonlinear optical signal processing (NOSP) has the potential to significantly improve the throughput, flexibility, and cost-efficiency of optical communication networks by exploiting the intrinsically ultrafast optical nonlinear wave mixing. It can support digital signal processing speeds of up to terabits per second, far exceeding the line rate of the electronic counterpart. In NOSP, high-intensity light fields are used to generate nonlinear optical responses, which can be used to process optical signals. Great efforts have been devoted to developing new materials and structures for NOSP. However, one of the challenges in implementing NOSP is the requirement of high-intensity light fields, which is difficult to generate and maintain. This has been a major roadblock to realize practical NOSP systems for high-speed, high-capacity optical communications. Here, we propose using a parity-time (PT) symmetric microresonator system to significantly enhance the light intensity and support high-speed operation by relieving the bandwidth-efficiency limit imposed on conventional single resonator systems. The design concept is the co-existence of a PT symmetry broken regime for a narrow-linewidth pump wave and near-exceptional point operation for broadband signal and idler waves. This enables us to achieve a new NOSP system with two orders of magnitude improvement in efficiency compared to a single resonator. With a highly nonlinear AlGaAs-on-Insulator platform, we demonstrate an NOSP at a data rate approaching 40 gigabits per second with a record low pump power of one milliwatt. These findings pave the way for the development of fully chip-scale NOSP devices with pump light sources integrated together, potentially leading to a wide range of applications in optical communication networks and classical or quantum computation. The combination of PT symmetry and NOSP may also open up opportunities for amplification, detection, and sensing, where response speed and efficiency are equally important. Supplementary Information: The online version contains supplementary material available at 10.1186/s43593-024-00062-w.

Ultra-small mode area V-groove waveguide design for on-chip single-photon emission.

We numerically investigate the figures of merit for single-photon emission in a planar GaAs-on-insulator waveguide featuring a V-groove geometry. Thanks to a field enhancement effect arising due to boundary conditions of this waveguide, the structure features an ultra-small mode area enabling a factor of a maximum 2.8 times enhancement of the Purcell factor for quantum dot and a more significant 7 times enhancement for the atomic-size solid-state emitters with the aligned dipole orientation. In addition, the coupling efficiency to the fundamental quasi-TE mode is also improved. To take into account potential on-chip integration, we further show that the V-groove mode profile can be converted using a tapering section to the mode profile of a standard ridge waveguide while maintaining both the high Purcell factor and the good fundamental mode coupling efficiency.

Thermorefractive noise reduction of photonic molecule frequency combs using an all-optical servo loop.

Phase and frequency noise originating from thermal fluctuations is commonly a limiting factor in integrated photonic cavities. To reduce this noise, one may drive a secondary "servo/cooling" laser into the blue side of a cavity resonance. Temperature fluctuations which shift the resonance will then change the amount of servo/cooling laser power absorbed by the device as the laser moves relatively out of or into the resonance, and thereby effectively compensate for the fluctuation. In this paper, we use a low noise laser to demonstrate this principle for the first time in a frequency comb generated from a normal dispersion photonic molecule micro-resonator. Significantly, this configuration can be used with the servo/cooling laser power above the usual nonlinearity threshold since resonances with normal dispersion are available. We report a 50 % reduction in frequency noise of the comb lines in the frequency range of 10 kHz to 1 MHz and investigate the effect of the secondary servo/cooling noise on the comb.

Surface defect effects in AlGaAs-on-Insulator photonic waveguides.

We report on our study of optical losses due to sub-band-gap absorption in AlGaAs-on-Insulator photonic nano-waveguides. Via numerical simulations and optical pump-probe measurements, we find that there is significant free carrier capture and release by defect states. Our measurements of the absorption of these defects point to the prevalence of the well-studied EL2 defect, which forms near oxidized (Al)GaAs surfaces. We couple our experimental data with numerical and analytical models to extract important parameters related to surface states, namely the coefficients of absorption, surface trap density and free carrier lifetime.

Observation of multiple bulk bound states in the continuum modes in a photonic crystal cavity.

Obtaining bound states in the continuum (BICs) in photonic crystals gives rise to the realization of resonances with high quality factors for lasing and nonlinear applications. For BIC cavities in finite-size photonic crystals, the bulk resonance band turns into discrete modes with different mode profiles and radiation patterns. Here, photonic-crystal BIC cavities encircled by the photonic bandgap of lateral heterostructures are designed. The mirror-like photonic bandgap exhibits strong side leakage suppression to confine the mode profile in the designed cavity. Multiple bulk quantized modes are observed both in simulation and experiment. After exciting the BIC cavity at different positions, different resonance peaks are observed. The physical origin of the dependence between the resonance peak and the illuminating position is explained by analyzing the mode profile distribution and further verified by numerical simulations. Our findings have potential applications regarding the mode selectivity in BIC devices to manipulate the lasing mode in photonic-crystal surface-emitting lasers or the radiation pattern in nonlinear optics.

Super-broadband on-chip continuous spectral translation unlocking coherent optical communications beyond conventional telecom bands.

Today's optical communication systems are fast approaching their capacity limits in the conventional telecom bands. Opening up new wavelength bands is becoming an appealing solution to the capacity crunch. However, this ordinarily requires the development of optical transceivers for any new wavelength band, which is time-consuming and expensive. Here, we present an on-chip continuous spectral translation method that leverages existing commercial transceivers to unlock the vast and currently unused potential new wavelength bands. The spectral translators are continuous-wave laser pumped aluminum gallium arsenide on insulator (AlGaAsOI) nanowaveguides that provide a continuous conversion bandwidth over an octave. We demonstrate coherent transmission in the 2-µm band using well-developed conventional C-band transmitters and coherent receivers, as an example of the potential of the spectral translators that could also unlock communications at other wavelength bands. We demonstrate 318.25-Gbit s-1 Nyquist wavelength-division multiplexed coherent transmission over a 1.15-km hollow-core fibre using this approach. Our demonstration paves the way for transmitting, detecting, and processing signals at wavelength bands beyond the capability of today's devices.

Suppression of avoided resonance crossing in microresonators.

Kerr frequency comb generation in microresonators is enabled by notable developments in fabrication technology and novel nonlinear material platforms. However, even in a low loss and highly nonlinear microresonator, the avoided resonance crossing may hamper reliable frequency comb generation. We present a method to suppress the avoided resonance crossing induced by polarization mode coupling. Our approach employs a filter waveguide coupled to a microring resonator for selective filtering of the TM00 mode while keeping the operational TE00 mode with low loss. We experimentally demonstrate an avoided-crossing-suppressed microresonator in the AlGaAs-on-insulator platform.

High-Q titanium dioxide micro-ring resonators for integrated nonlinear photonics.

We report on the nonlinear characterizations of the titanium dioxide micro-ring resonators (TiO2 MRRs). By utilizing optimized fabrication processes, high quality factors (Q∼1.4 × 105) doubling that of the previous work are achieved here for TiO2 MRRs with high-confinement TiO2 waveguides. The four-wave mixing (FWM) experiment results with low and high signal power demonstrate that, the fabricated TiO2 MRRs can perform broadband (∼40 nm) wavelength conversion and cascaded FWMs. These achievements pave the way for key nonlinear photonic applications with TiO2 waveguides and provide an efficient platform for various integrated photonic devices.

744-nm wavelength conversion of PAM-4 signal using an AlGaAsOI nanowaveguide.

Exploring new frequency bands for optical transmission is essential to overcome the capacity crunch. The 2-µm band is becoming a research spotlight due to available broadband thulium-doped fiber amplifiers as well as low-latency, low-loss hollow-core fibers. Yet most of the 2-µm band devices designed for optical communication are still in their infancy. In this Letter, we propose wavelength conversion based on four-wave mixing in a highly nonlinear AlGaAsOI nanowaveguide to bridge the 2-µm band and the conventional bands. Due to the strong light confinement of the AlGaAsOI nanowaveguide, high-order phase match is enabled by dispersion engineering to achieve a large synergetic conversion bandwidth with high conversion efficiency. Simulation results show a possible conversion bandwidth over an octave. An AlGaAsOI nanowaveguide with 3-mm length and a nominal cross-section dimension of $ 320\;{\rm nm} \times 680\;{\rm nm} $320nm×680nm is used for the wavelength conversion of a 10 Gbit/s non-return-to-zero on-off keying signal and a 10 Gbit/s Nyquist-shaped four-level pulse-amplitude modulation signal. A conversion efficiency of $ - {28}\;{\rm dB}$-28dB is achieved using a 17.5-dBm continuous-wave pump in the C band, with 744 nm conversion from 1999.65 to 1255.35 nm.

Octave-spanning coherent supercontinuum generation in an AlGaAs-on-insulator waveguide.

We demonstrate supercontinuum generation over an octave spaning from 1055 to 2155 nm on the highly nonlinear aluminum gallium arsenide (AlGaAs)-on-insulator platform. This is enabled by the generation of two dispersive waves in a 3-mm-long dispersion-engineered nano-waveguide. The waveguide is pumped at telecom wavelengths (1555 nm) with 3.6 pJ femtosecond pulses. We experimentally validate the coherence of the generated supercontinuum around the pump wavelength (1450-1750 nm), and our numerical simulation shows a high degree of coherence over the full spectrum.

4H-SiC microring resonators for nonlinear integrated photonics.

We demonstrate enhanced four-wave mixing (FWM) in high-quality factor, high-confinement 4H-SiC microring resonators via continuous-wave FWM. With the large power buildup effect of the microring resonator, -21.7 dBFWM conversion efficiency is achieved with 79 mW pump power. Thanks to the strong light confinement in SiC-on-insulator (SiCOI) waveguides with submicrometer cross-sectional dimensions, a high nonlinear parameter wγ of 7.4±0.9 W-1 m-1 is obtained, from which the nonlinear refractive index (n2) of 4H-SiC is estimated to be (6.0±0.6)×10-19 m2/W at the telecom wavelengths. Besides, we are able to engineer the dispersion of a SiCOI waveguide to achieve 3 dB FWM conversion bandwidth of more than 130 nm. This work represents a step toward enabling all-optical signal processing functionalities using highly nonlinear SiCOI waveguides.

High-quality factor, high-confinement microring resonators in 4H-silicon carbide-on-insulator.

Silicon carbide (SiC) exhibits promising material properties for nonlinear integrated optics. We report on a SiC-on-insulator platform based on crystalline 4H-SiC and demonstrate high-confinement SiC microring resonators with sub-micron waveguide cross-sectional dimensions. The Q factor of SiC microring resonators in such a sub-micron waveguide dimension is improved by a factor of six after surface roughness reduction by applying a wet oxidation process. We achieve a high Q factor (73,000) for such devices and show engineerable dispersion from normal to anomalous dispersion by controlling the waveguide cross-sectional dimension, which paves the way toward nonlinear applications in SiC microring resonators.

High-confinement gallium nitride-on-sapphire waveguides for integrated nonlinear photonics.

We demonstrate a highly effective nonlinearity of 7.3 W-1 m-1 in a high-confinement gallium nitride-on-sapphire waveguide by performing four-wave mixing characterization at telecom wavelengths. Benefitting from a high-index-contrast waveguide layout, we can engineer the device dispersion efficiently and achieve broadband four-wave mixing operation over more than 100 nm. The intrinsic material nonlinearity of gallium nitride is extracted. Furthermore, we fabricate microring resonators with quality factors above 100,000, which will be promising for various nonlinear applications.

Octave-spanning supercontinuum generation in a silicon-rich nitride waveguide: erratum.

We update the simulations presented in Opt. Lett.41, 2719 (2016)OPLEDP0146-959210.1364/OL.41.002719 using a corrected value for the material nonlinearity.

Low-loss high-confinement waveguides and microring resonators in AlGaAs-on-insulator.

AlGaAs is a promising material for integrated nonlinear photonics due to its intrinsic high nonlinearity. However, the challenging fabrication of deep etched AlGaAs devices makes it difficult to realize high-performance devices such as low-loss dispersion engineered waveguides and high-quality microring resonators. Here, we report a process to make high-quality AlGaAs-on-insulator (AlGaAsOI) wafers where high confinement waveguides can be realized. Using optimized patterning processes, we fabricated AlGaAsOI waveguides with propagation losses as low as 1 dB/cm and microring resonators with quality factors up to 350,000 at telecom wavelengths. Our demonstration opens new prospects for AlGaAs devices in integrated nonlinear photonics.

Octave-spanning supercontinuum generation in a silicon-rich nitride waveguide.

We experimentally show octave-spanning supercontinuum generation in a nonstoichiometric silicon-rich nitride waveguide when pumped by femtosecond pulses from an erbium fiber laser. The pulse energy and bandwidth are comparable to results achieved in stoichiometric silicon nitride waveguides, but our material platform is simpler to manufacture. We also observe wave-breaking supercontinuum generation by using orthogonal pumping in the same waveguide. Additional analysis reveals that the waveguide height is a powerful tuning parameter for generating mid-infrared dispersive waves while keeping the pump in the telecom band.

One-to-six WDM multicasting of DPSK signals based on dual-pump four-wave mixing in a silicon waveguide.

We present WDM multicasting based on dual-pump four-wave mixing in a 3-mm long dispersion engineered silicon waveguide. One-to-six phase-preserving WDM multicasting of 10-Gb/s differential phase-shift-keying (DPSK) data is experimentally demonstrated with bit-error rate measurements. All the six multicast signals show error-free performance with power penalty less than 3.8 dB.

Ultra-high-speed wavelength conversion in a silicon photonic chip.

We have successfully demonstrated all-optical wavelength conversion of a 640-Gbit/s line-rate return-to-zero differential phase-shift keying (RZ-DPSK) signal based on low-power four wave mixing (FWM) in a silicon photonic chip with a switching energy of only ~110 fJ/bit. The waveguide dispersion of the silicon nanowire is nano-engineered to optimize phase matching for FWM and the switching power used for the signal processing is low enough to reduce nonlinear absorption from two-photon-absorption (TPA). These results demonstrate that high-speed wavelength conversion is achievable in silicon chips with high data integrity and indicate that high-speed operation can be obtained at moderate power levels where nonlinear absorption due to TPA and free-carrier absorption (FCA) is not detrimental. This demonstration can potentially enable high-speed optical networks on a silicon photonic chip.

Tunable complex-valued multi-tap microwave photonic filter based on single silicon-on-insulator microring resonator.

A complex-valued multi-tap tunable microwave photonic filter based on single silicon-on-insulator microring resonator is presented. The degree of tunability of the approach involving two, three and four taps is theoretical and experimentally characterized, respectively. The constraints of exploiting the optical phase transfer function of a microring resonator aiming at implementing complex-valued multi-tap filtering schemes are also reported. The trade-off between the degree of tunability without changing the free spectral range and the number of taps is studied in-depth. Different window based scenarios are evaluated for improving the filter performance in terms of the side-lobe level.