Efficient adsorption of low-concentration uranium from aqueous solutions by biomass composite aerogel.

The development of nuclear energy has led to the depletion of uranium resources and now presents the challenge of treating radioactive wastewater. Extracting uranium from seawater and nuclear wastewater has been identified as an effective strategy for addressing these issues. However, extracting uranium from nuclear wastewater and seawater is still extremely challenging. In this study, an amidoxime-modified feather keratin aerogel (FK-AO aerogel) was prepared using feather keratin for efficient uranium adsorption. The FK-AO aerogel showed an impressive adsorption capacity of 585.88 mg·g-1 in an 8 ppm uranium solution, with a calculated maximum adsorption capacity of 990.10 mg·g-1. Notably, the FK-AO aerogel demonstrated excellent selectivity for U(VI) in simulated seawater that contained coexisting heavy metal ions. In a uranium solution having a salinity of 35 g·L-1 and a concentration of 0.1-2 ppm, the FK-AO aerogel achieved a uranium removal rate of greater than 90 %, indicating its effectiveness in adsorbing uranium in environments having high salinity and low concentration. This suggests that FK-AO aerogel is an ideal adsorbent for extracting uranium from seawater and nuclear wastewater, and it is also expected that it could be used in industrial applications for extracting uranium from seawater.

Waste feather fiber based high extraction capacity bio-adsorbent for sustainable uranium extraction from seawater.

Recycling uranium from seawater is of great significance to the development of nuclear industry. However, due to high salinity and low uranium concentration in seawater, there are still many challenges in current seawater uranium extraction technology. In this study, waste feather fibers (FF) were used as raw materials to develop a phosphonate-functionalized feather fiber (FF-PT). The study on the adsorption performance shows that FF-PT have good adsorption and recycling performance for uranium. The study on the adsorption performance shows that FF-PT have good adsorption and recycling performance for uranium. The adsorption capacity reaches up to 342.5 mg·g-1 in the 8 ppm uranium solution, and service life of at least 10 cycles were obtained. In addition, in the environment with high salinity and the coexistence of metal competitive ions, FF-PT also shows excellent selectivity, and it can reach 3.22 mg·g-1 adsorption capacity after immersed in natural seawater for 30 days. Combined with the results of economic analysis, we believe that the FF-PT has broad application prospects in the industrialized uranium extraction from seawater.

Elaboration of the Demulsification Process of W/O Emulsion with Three-Dimensional Electric Spiral Plate-Type Microchannel.

Rapid and efficient demulsification (destabilizing of an emulsion) processes of a water in oil (W/O) emulsion were carried out in a three-dimensional electric spiral plate-type microchannel (3D-ESPM). In this experiment, the demulsifying efficiency of emulsions by 3D-ESPM was compared with that by gravity settling, the factors influencing demulsifying efficiency were investigated, and the induction period, cut size and residence time in the demulsification process were studied. The results showed that in contrast to the gravity settling method, 3D-ESPM can directly separate the disperse phase (water) instead of the continuous phase (oil). The maximum demulsifying efficiency of W/O emulsion in a single pass through the 3D-ESPM reached 90.3%, with a microchannel height of 200 µm, electric field intensity of 250 V /cm, microchannel angle of 180°, microchannel with 18 plates and a flow rate of 2 mL /min. An induction period of 0.6 s during the demulsification process was simulated with experimental data fitting. When the residence time of emulsion in 3D-ESPM was longer than the induction period, its demulsifying efficiency increased as the increase of the flow velocity due to the droplet coalescence effects of Dean vortices in the spiral microchannel. For this device a cut size of droplets of 4.5 µm was deduced. Our results showed that the demulsification process of W/O emulsion was intensified by 3D-ESPM based on the coupling effect between electric field-induced droplets migration and microfluidic hydrodynamic trapping.

Demulsification of Kerosene/Water Emulsion in the Transparent Asymmetric Plate-Type Micro-Channel.

Asymmetric plate-type micro-channels (APM) have one hydrophobic wall and one hydrophilic wall. By flowing through APM, a kerosene-in-water emulsion can be de-emulsified in one second. To date, however, the demulsification process in the APM is still a black box. In order to observe the demulsification process directly, transparent asymmetric plate-type micro-channels (TAPM) were fabricated with two surface-modified glass plates. Emulsions with oil contents of 10%, 30%, and 50% were pumped through TAPM with heights of 39.2 µm and 159.5 µm. The movement and coalescence of oil droplets (the dispersed phase of a kerosene-in-water emulsion) in the TAPM were observed directly with an optical microscope. By analyzing videos and photographs, it was found that the demulsification process included three steps: oil droplets flowed against and were adsorbed on the hydrophobic wall, then oil droplets coalesced to form larger droplets, whereupon the oil phase was separated. The experimental results showed that the demulsification efficiency was approximately proportional to the oil content (30⁻50%) of the emulsions and increased when the micro-channel height was reduced.