Patterned Biolayers of Protein Antigens for Label-Free Biosensing in Cow Milk Allergy.

This paper focuses on creating one-dimensional diffractive grooved structures of antigen proteins on glass substrates for the label-free detection of antibodies to dairy allergens. In particular, the fabrication of protein structures is carried out by combining microcontact printing with physisorption, imines coupling, and thiol-ene click chemistry. The work first sets up these patterning methods and discusses and compares the main aspects involved in them (structure, biolayer thickness, functionality, stability). Homogeneous periodic submicron structures of proteins are created and characterized by diffractive measurements, AFM, FESEM, and fluorescence scanning. Then, this patterning method is applied to proteins involved in cow milk allergy, and the resulting structures are implemented as optical transducers to sense specific immunoglobulins G. In particular, gratings of bovine serum albumin, casein, and ß-lactoglobulin are created and assessed, reaching limits of detection in the range of 30-45 ng·mL-1 of unlabeled antibodies by diffractive biosensing.

Large-Scale Nanogrooved Photonic Crystals for Label-Free Biosensing by Guided-Mode Resonance.

We have developed large-scale one-dimensional photonic crystals from standard recordable Blu-ray disks, tailored to sense unlabeled biorecognition events on their surface. These materials rely on coating, with layers of 80 nm of titanium oxide, nanogrooved polycarbonate plates obtained from regular disks. As a result, they present guided-mode resonances that we have demonstrated that can be exploited to quantify biorecognition events by means of the bandgap positions in the transmission spectra. These photonic crystals have displayed well-correlated dose-response curves in immunoassays to quantify IgGs, C-reactive protein, and lactate dehydrogenase. The detection limit reached is 16 ng/mL, 2µg/mL, and 18 ng/mL, respectively. Herein we describe the experimental procedures and methods to fabricate and functionalize these photonic crystals, perform immunoassays on them, set up an optical system to measure their response, and process the resulting data to perform bioanalytical determinations in label-free format.

Phosphorylcholine-based hydrogel for immobilization of biomolecules. Application to fluorometric microarrays for use in hybridization assays and immunoassays, and nanophotonic biosensing.

An approach is presented for covalent immobilization of biomolecules on an acrylate phosphorylcholine hydrogel. The immobilization and the hydrogel formation take place simultaneously by a thiol-acrylate coupling reaction, induced by UV-light (254 nm). The hydrogel is prepared on two polymeric surfaces (the HardCoat protective layer of Blu-Ray discs, and SU-8) and applied to fluorescence microarray and label-free interferometric detection. For the first, Cy5 labeled analytes are used (λem 635 nm) and, for the second, a periodic array of high-aspect ratio nanopillars detects unlabeled analytes by interferometry. Bioavailability of the immobilized probes is demonstrated in labeled assays; for the case of oligonucleotides by discriminating single nucleotide polymorphisms, and, for the case of antibodies, by BSA immunorecognition. The raw hydrogel is employed to detect human C-reactive protein, in both labeled and non-labeled assay formats, with sensitivities of 30 ng·mL-1 and 2 pg·mL-1, respectively. Graphical abstract Schematic presentation of the phosphorylcholine (MPC) hydrogel preparation onto BluRay disc and SU-8 nanopillars to perform fluorescence and label-free interferometric detection, respectively. It selectively detects C-reactive protein (CRP), but it can covalently immobilize antibodies or nucleid acid probes to detect other analytes.

New structural insights into the role of TROVE2 complexes in the on-set and pathogenesis of systemic lupus erythematosus determined by a combination of QCM-D and DPI.

The mechanism of self-recognition of the autoantigen TROVE2, a common biomarker in autoimmune diseases, has been studied with a quartz crystal microbalance with dissipation monitoring (QCM-D) and dual polarization interferometry (DPI). The complementarity and remarkable analytical features of both techniques has allowed new insights into the onset of systemic lupus erythematosus (SLE) to be achieved at the molecular level. The in vitro study for SLE patients and healthy subjects suggests that anti-TROVE2 autoantibodies may undergo an antibody bipolar bridging. An epitope-paratope-specific binding initially occurs to activate a hidden Fc receptor in the TROVE2 tertiary structure. This bipolar mechanism may contribute to the pathogenic accumulation of anti-TROVE2 autoantibody immune complex in autoimmune disease. Furthermore, the specific calcium-dependent protein-protein bridges point out at how the TRIM21/TROVE2 association might occur, suggesting that the TROVE2 protein could stimulate the intracellular immune signaling via the TRIM21 PRY-SPRY domain. These findings may help to better understand the origins of the specificity and affinity of TROVE2 interactions, which might play a key role in the SLE pathogenesis. This manuscript gives one of the first practical applications of two novel functions (-df/dD and Δh/molec) for the analysis of the data provided by QCM-D and DPI. In addition, it is the first time that QCM-D has been used for mapping hidden Fc receptors as well as linear epitopes in a protein tertiary structure. Graphical abstract ᅟ.

Fluor-thiol Photocoupling Reaction for Developing High Performance Nucleic Acid (NA) Microarrays.

Spatially controlled anchoring of NA probes onto microscope glass slides by a novel fluor-thiol coupling reaction is performed. By this UV-initiated reaction, covalent immobilization in very short times (30 s at 254 nm) is achieved with probe densities of up to 39.6 pmol/cm2. Modulating the surface hydrophobicity by combining a hydrophobic silane and a hydrophilic silane allows the fabrication of tuned surfaces where the analyte approaches only the anchored probe, which notably reduces nonspecific adsorption and the background. The generated substrates have proven clear advantages for discriminating single-base-pair mismatches, and for detecting bacterial PCR products. The hybridization sensitivity achieved by these high-performance surfaces is about 1.7 pM. Finally, this anchoring reaction is demonstrated using two additional surfaces: polytetrafluoroethylene (PTFE) and polyvinylidene fluoride (PVDF) membranes. This provides a very interesting pathway for anchoring thiolated biomolecules onto surfaces with C-F motifs via a quick clean UV reaction.

A label-free diffraction-based sensing displacement immunosensor to quantify low molecular weight organic compounds.

Herein we present a diffractometric immunosensor to quantify low molecular weight organic compounds in a label-free, simple, and sensitive fashion. The approach is based on patterning analyte analogues (haptens) on solid surfaces according to a diffractive structure, and then loading specific antibodies on them to be subsequently displaced by free analytes in solution. This displacement generates a measurable change in the diffractive response that enables to quantify the analyte concentration. In this study we address the fabrication, optimization, and assessment of these diffractive structures of biological probes and their application to the analysis of atrazine, an organic compound extensively used as pesticide. This immunosensor displays well-correlated dose-response curves that reach a detection limit of 1.1 ng mL-1 of atrazine in label-free conditions. From a general viewpoint, this study also aims to provide insights into exploiting this approach towards prospective in-field analysis and screening strategies to sense multiple low molecular weight compounds in label-free conditions.

Indirect Microcontact Printing to Create Functional Patterns of Physisorbed Antibodies.

Microcontact printing (µCP) is a practical and versatile approach to create nanostructured patterns of biomolecular probes, but it involves conformational changes on the patterned bioreceptors that often lead to a loss on the biological activity of the resulting structures. Herein we introduce indirect µCP to create functional patterns of bioreceptors on solid substrates. This is a simple strategy that relies on physisorbing biomolecular probes of interest in the nanostructured gaps that result after patterning backfilling agents by standard µCP. This study presents the approach, assesses bovine serum albumin as backfilling agent for indirect µCP on different materials, reports the limitations of standard µCP on the functionality of patterned antibodies, and demonstrates the capabilities of indirect µCP to solve this issue. Bioreceptors were herein structured as diffractive gratings and used to measure biorecognition events in label-free conditions. Besides, as a preliminary approach towards sensing biomarkers, this work also reports the implementation of indirect µCP in an immunoassay to detect human immunoglobulin E.

Modulating receptor-ligand binding in biorecognition by setting surface wettability.

Modulation of support wettability used for microarray format biosensing has led to an improvement of results. Hydrophobicity of glass chips was set by derivatizing with single vinyl organosilanes of different chain length and silane mixtures. Thiol-ene photochemical linking has been used as effective chemistry for covalent anchoring of thiolated probes. Lowest unspecific binding and highest signal intensity and SNR were obtained with large hydrocarbon chain (C22) silanes or a shorter one (C10) containing fluorine atoms. SNR resulting values are improved, reaching levels higher than 1500 in some cases, when using vinyl silanes modified with 1% C10 alkyl fluorinated one, because mild hydrophobicity was achieved (water contact angle ca. 110°) for all silanes, including the short C2 and C3, thus giving rise to smaller and better defined array spots. In addition, unspecific binding of reagents and targets was totally withdrawn. Hence, good-performing surfaces for biosensing applications can be built using appropriate organosilane reagent selection, including fluorinated ones. Graphical abstract ᅟ.

Diffractive Protein Gratings as Optically Active Transducers for High-Throughput Label-free Immunosensing.

A novel label-free biosensing approach based on bioreceptor networks patterned as diffractive gratings (biogratings) has been developed. Nanogrooved structures were used as optically active scaffolds for producing arrays of functional BSA biogratings on low energy surfaces by a water-assisted variant of microcontact printing. An analytical scanner, comprising a LightScribe compact disk drive, was developed to measure the diffraction patterns of these biogratings, thus allowing biointeractions to be quantitatively sensed in a multiplex and label-free fashion by means of diffraction efficiency changes. The approach was demonstrated by immunoassaying IgGs, reaching well-correlated responses with quantification and detection limits of 1.3 and 5.2 nM, respectively. These results provide appealing insights into cost-effective, portable, and scalable alternatives for designing new analytical technologies based on diffractive gratings of bioreceptors.

Lateral flow immunoassay for on-site detection of Xanthomonas arboricola pv. pruni in symptomatic field samples.

Xanthomonas arboricola pv. pruni is a quarantine pathogen and the causal agent of the bacterial spot disease of stone fruits and almond, a major threat to Prunus species. Rapid and specific detection methods are essential to improve disease management, and therefore a prototype of a lateral flow immunoassay (LFIA) was designed for the detection of X. arboricola pv. pruni in symptomatic field samples. It was developed by producing polyclonal antibodies which were then combined with carbon nanoparticles and assembled on nitrocellulose strips. The specificity of the LFIA was tested against 87 X. arboricola pv. pruni strains from different countries worldwide, 47 strains of other Xanthomonas species and 14 strains representing other bacterial genera. All X. arboricola pv. pruni strains were detected and cross-reactions were observed only with four strains of X. arboricola pv. corylina, a hazelnut pathogen that does not share habitat with X. arboricola pv. pruni. The sensitivity of the LFIA was assessed with suspensions from pure cultures of three X. arboricola pv. pruni strains and with spiked leaf extracts prepared from four hosts inoculated with this pathogen (almond, apricot, Japanese plum and peach). The limit of detection observed with both pure cultures and spiked samples was 104 CFU ml-1. To demonstrate the accuracy of the test, 205 samples naturally infected with X. arboricola pv. pruni and 113 samples collected from healthy plants of several different Prunus species were analyzed with the LFIA. Results were compared with those obtained by plate isolation and real time PCR and a high correlation was found among techniques. Therefore, we propose this LFIA as a screening tool that allows a rapid and reliable diagnosis of X. arboricola pv. pruni in symptomatic plants.

Improved Performance of DNA Microarray Multiplex Hybridization Using Probes Anchored at Several Points by Thiol-Ene or Thiol-Yne Coupling Chemistry.

Nucleic acid microarray-based assay technology has shown lacks in reproducibility, reliability, and analytical sensitivity. Here, a new strategy of probe attachment modes for silicon-based materials is built up. Thus, hybridization ability is enhanced by combining thiol-ene or thiol-yne click chemistry reactions with a multipoint attachment of polythiolated probes. The viability and performance of this approach was demonstrated by specifically determining Salmonella PCR products up to a 20 pM sensitivity level.

Primer design for SNP genotyping based on allele-specific amplification-Application to organ transplantation pharmacogenomics.

Diagnostic methods based on single nucleotide polymorphism (SNP) biomarkers are essential for the real adoption of personalized medicine. Allele specific amplification in a homogeneous format or combined to microarray hybridization are powerful approaches for SNP genotyping. However, primers must be properly selected to minimize cross-reactivity, dimer formation and nonspecific hybridization. This study presents a design workflow diagram for the selection of required oligonucleotides for multiplex assays. Based on thermodynamic restrictions, the oligonucleotide sets are chosen for a specific amplification of wild- and mutant-type templates. Design constraints include the structural stability of primer-template duplexes, template-probe duplexes and self-annealing complexes or hairpins for each targeted gene. The performance of the design algorithm was evaluated for the simultaneous genotyping of three SNPs related to immunosuppressive drugs administered after solid organ transplantation. The assayed polymorphisms were rs1045642 (ABCB1 gene), rs1801133 (MTHFR gene) and rs776746 (CYP3A5 gene). Candidates were confirmed by discriminating homozygote and heterozygote populations using a fluorescence solution method and two colorimetric microarray methods on polycarbonate chips. The analysis of patient samples provided excellent genotyping results compared to those obtained by a reference method. The study demonstrates that the development of the allele-specific methods as pharmacogenetic tools can be simplified.

Label-free piezoelectric biosensor for prognosis and diagnosis of Systemic Lupus Erythematosus.

An autoantigen piezoelectric sensor to quantify specific circulating autoantibodies in human serum is developed. The sensor consisted on a quartz crystal microbalance with dissipation monitoring (QCM-D) where TRIM21 and TROVE2 autoantigens were covalently immobilized, allowing the selective determination of autoantibodies for diagnosis and prognosis of Systemic Lupus Erythematosus (SLE). The sensitivity of the biosensor, measured as IC50 value, was 1.51U/mL and 0.32U/mL, for anti-TRIM21 and anti-TROVE2 circulating autoantibodies, respectively. The sensor is also able to establish a structural interaction fingerprint pattern or profile of circulating autoantibodies, what allows scoring accurately SLE patients. Furthermore, a statistical association of global disease activity with TRIM21-TROVE2 interaction was found (n=130 lupic patient samples, p-value=0.0413). The performances of the biosensor were compared with standard ELISA and multiplex DVD-array high-throughput screening assays, corroborating the viability of piezoelectric biosensor as a cost-effective in vitro assay for the early detection, monitoring or treatment of rare diseases.

Disc-based microarrays: principles and analytical applications.

The idea of using disk drives to monitor molecular biorecognition events on regular optical discs has received considerable attention during the last decade. CDs, DVDs, Blu-ray discs and other new optical discs are universal and versatile supports with the potential for development of protein and DNA microarrays. Besides, standard disk drives incorporated in personal computers can be used as compact and affordable optical reading devices. Consequently, a CD technology, resulting from the audio-video industry, has been used to develop analytical applications in health care, environmental monitoring, food safety and quality assurance. The review presents and critically evaluates the current state of the art of disc-based microarrays with illustrative examples, including past, current and future developments. Special mention is made of the analytical developments that use either chemically activated or raw standard CDs where proteins, oligonucleotides, peptides, haptens or other biological probes are immobilized. The discs are also used to perform the assays and must maintain their readability with standard optical drives. The concept and principle of evolving disc-based microarrays and the evolution of disk drives as optical detectors are also described. The review concludes with the most relevant uses ordered chronologically to provide an overview of the progress of CD technology applications in the life sciences. Also, it provides a selection of important references to the current literature. Graphical Abstract High density disc-based microarrays.

Real-time loop-mediated isothermal DNA amplification in compact disc micro-reactors.

An integrated device composed of micro-reactors embedded onto compact discs is proposed for real-time targeted DNA determination. The method principle is based on in-disc loop-mediated isothermal amplification (iD-LAMP) and quantitative optical read-out by a disc drive. In the presence of a target, the turbidimetric or colorimetric properties of reaction solution change, and the transmitted intensity of the disc drive laser modifies according to reaction yield. Monitoring real-time curves allowed the quantitative determination of DNA template amounts. The best amplification/detection results were obtained with micro-reactors (2mm diameter and 1.1mm in depth) drilled on a digital video disc (DVD) and detection based on the colorimetric mode. As proof-of-concept, the assay was applied to detect pathogenic bacteria Salmonella spp. and to identify bovine meat in food samples. Ninety-six samples were simultaneously analysed in 15 min, with high selectivity and sensitivity (5 CFU/mL and 10 µg/g for bacteria and meat, respectively). The in-disc results were comparable to those obtained by conventional LAMP or qPCR approaches. The developed device allows low sample and reagent consumption (3 µL of reaction), portability, ease-of-use, and rapid low-cost high-throughput analyses.

Massive immuno multiresidue screening of water pollutants.

An immuno multiresidue screening assay in microarray format for the determination of complex chemical mixtures at the microgram per liter level, using antibody-functionalized gold nanoparticles, is presented. The analytical method relies on the use of a cocktail of nanogold-labeled specific antibodies, acting as recognition and detection species. The concept of multireside screening is proved by developing a multiplex assay on a compact disk support for the determination of 2-(2,4,5-trichlorophenoxy)propionic acid, 3-phenoxybenozic acid, 4-nitrophenol, alachlor, atrazine, azoxystrobin, chlorpyrifos, diazinon, diuron, endosulfan, fenthion, forchlorfenuron, imidacloprid, malathion, pentachlorophenol, pyraclostrobin, sulfasalazine, and triclosan, achieving detection limits of 0.07, 0.24, 10.9, 0.21, 0.14, 0.11, 0.11, 102, 0.36, 1.8, 1.7, 0.06, 0.08, 5.8, 1.0, 0.39, 0.003, and 12 µg/L, respectively. Due to the selectivity of the antibody-functionalized nanoparticles, the developed screening methodology allows the simultaneous determination of mixtures of water pollutants in a 10-plex configuration. The analytical performances were compared with those of reference chromatographic methods by the analysis of spiked water samples, the sensitivity and recovery results being in good agreement. The presented screening approach directly quantifies the concentration of complex chemical mixtures without sample treatment or preconcentration steps in a total time of 35 min.

Aluminum Nanoholes for Optical Biosensing.

Sub-wavelength diameter holes in thin metal layers can exhibit remarkable optical features that make them highly suitable for (bio)sensing applications. Either as efficient light scattering centers for surface plasmon excitation or metal-clad optical waveguides, they are able to form strongly localized optical fields that can effectively interact with biomolecules and/or nanoparticles on the nanoscale. As the metal of choice, aluminum exhibits good optical and electrical properties, is easy to manufacture and process and, unlike gold and silver, its low cost makes it very promising for commercial applications. However, aluminum has been scarcely used for biosensing purposes due to corrosion and pitting issues. In this short review, we show our recent achievements on aluminum nanohole platforms for (bio)sensing. These include a method to circumvent aluminum degradation--which has been successfully applied to the demonstration of aluminum nanohole array (NHA) immunosensors based on both, glass and polycarbonate compact discs supports--the use of aluminum nanoholes operating as optical waveguides for synthesizing submicron-sized molecularly imprinted polymers by local photopolymerization, and a technique for fabricating transferable aluminum NHAs onto flexible pressure-sensitive adhesive tapes, which could facilitate the development of a wearable technology based on aluminum NHAs.

Isothermal DNA amplification strategies for duplex microorganism detection.

A valid solution for micro-analytical systems is the selection of a compatible amplification reaction with a simple, highly-integrated efficient design that allows the detection of multiple genomic targets. Two approaches under isothermal conditions are presented: recombinase polymerase amplification (RPA) and multiple displacement amplification (MDA). Both methods were applied to a duplex assay specific for Salmonella spp. and Cronobacter spp., with excellent amplification yields (0.2-8.6 · 10(8) fold). The proposed approaches were successfully compared to conventional PCR and tested for the milk sample analysis as a microarray format on a compact disc (support and driver). Satisfactory results were obtained in terms of resistance to inhibition, selectivity, sensitivity (10(1)-10(2)CFU/mL) and reproducibility (below 12.5%). The methods studied are efficient and cost-effective, with a high potential to automate microorganisms detection by integrated analytical systems working at a constant low temperature.

Total analysis systems with Thermochromic Etching Discs technology.

A new analytical system based on Thermochromic Etching Discs (TED) technology is presented. TED comprises a number of attractive features such as track independency, selective irradiation, a high power laser, and the capability to create useful assay platforms. The analytical versatility of this tool opens up a wide range of possibilities to design new compact disc-based total analysis systems applicable in chemistry and life sciences. In this paper, TED analytical implementation is described and discussed, and their analytical potential is supported by several applications. Microarray immunoassay, immunofiltration assay, solution measurement, and cell culture approaches are herein addressed in order to demonstrate the practical capacity of this system. The analytical usefulness of TED technology is herein demonstrated, describing how to exploit this tool for developing truly integrated analytical systems that provide solutions within the point of care framework.