Fluorescence of D-Glucose-Derived Carbon Dots: Effect of Process Parameters.

The aim of this study was to synthesize highly fluorescent carbon dots (CDs) from glucose using a microwave hydrothermal method. It explored the impact of glucose concentration, process time, molar ratio of KH2PO4 to glucose, and homogenization time on the resulting CDs, employing a fractional plan 3(k-1) with four independent parameters for twenty-seven synthesis. Results showed that longer process times at 200°C increased the fluorescence intensity of the CDs. The molar ratio of KH2PO4 to glucose, glucose concentration, and process time significantly influenced fluorescence. Homogenization was crucial for obtaining small particles, though an anti-aggregation agent might still be needed. UV-vis spectroscopy, spectrofluorimetry, and DLS were used to analyze the synthesized CDs. The UV-vis absorption maxima were observed around 230 nm and 282 nm, with peak shifts at different excitation wavelengths. Out of the twenty-seven samples, six CDs samples were identified to be below 10 nm and a total of twelve below 50 nm. Analyzing the results, the study concluded that the CDs possess strong fluorescence and are suitable for diverse applications. For enhanced fluorescence, longer process times at 200°C and the use of KH2PO4 were recommended, while shorter processes were preferred for obtaining smaller particles. Hierarchical clustering, the k-means method, Pareto charts, and profiles for predicted values and desirability were used to analyze the results. It was confirmed that higher fluorescence is favored by longer process time at 200°C and the use of KH2PO4. In order to obtain smaller particles, shorter processes should be used.

Inorganic Nanomaterials Used in Anti-Cancer Therapies:Further Developments.

In this article, we provide an overview of the progress of scientists working to improve the quality of life of cancer patients. Among the known methods, cancer treatment methods focusing on the synergistic action of nanoparticles and nanocomposites have been proposed and described. The application of composite systems will allow precise delivery of therapeutic agents to cancer cells without systemic toxicity. The nanosystems described could be used as a high-efficiency photothermal therapy system by exploiting the properties of the individual nanoparticle components, including their magnetic, photothermal, complex, and bioactive properties. By combining the advantages of the individual components, it is possible to obtain a product that would be effective in cancer treatment. The use of nanomaterials to produce both drug carriers and those active substances with a direct anti-cancer effect has been extensively discussed. In this section, attention is paid to metallic nanoparticles, metal oxides, magnetic nanoparticles, and others. The use of complex compounds in biomedicine is also described. A group of compounds showing significant potential in anti-cancer therapies are natural compounds, which have also been discussed.

Preparation and of PVA-based compositions with embedded silver, copper and zinc oxide nanoparticles and assessment of their antibacterial properties.

A series of poly(vinyl alcohol) (PVA) based liquid compositions with addition of zinc oxide, silver and copper nanoparticles has been prepared. The compositions also contained other consistency-forming organic components. The physico-chemical properties of the products have been determined. Their pH and density have been assessed. Also, the size of nanoparticles has been defined with using a dynamic light scattering technique. The compositions were subjected to XRD, FT-IR and microscopic analysis as well. Thanks to the incorporation of both metal oxide and metallic nanoparticles, it was possible to enrich the products with antibacterial properties. Their inhibiting properties in the growth of microorganisms have been confirmed against both Gram-negative and Gram-positive strains such as E. coli, S. aureus and P. aeruginosa. Thanks to the ability for solidification, the compositions may be applied on a bacterially contaminated surface, and after destroying the microorganisms and its solidification, it may be peeled off along with the dead bacterial film.

Analysis of the Exposure of Organisms to the Action of Nanomaterials.

The rapid development of the production of materials containing metal nanoparticles and metal oxides is a potential risk to the environment. The degree of exposure of organisms to nanoparticles increases from year to year, and its effects are not fully known. This is due to the fact that the range of nanoparticle interactions on cells, tissues and the environment requires careful analysis. It is necessary to develop methods for testing the properties of nanomaterials and the mechanisms of their impact on individual cells as well as on entire organisms. The particular need to raise public awareness of the main sources of exposure to nanoparticles should also be highlighted. This paper presents the main sources and possible routes of exposure to metal nanoparticles and metal oxides. Key elements of research on the impact of nanoparticles on organisms, that is, in vitro tests, in vivo tests and methods of detection of nanoparticles in organisms, are presented.

Methods for Reducing the Toxicity of Metal and Metal Oxide NPs as Biomedicine.

The rapid development of medicine has forced equally rapid progress in the field of pharmaceuticals. In connection with the expensive and time-consuming process of finding new drugs, great emphasis is put on the design and use of metal and metal oxides nanoparticles in nanomedicine. The main focus is on comprehensive presentation of both physicochemical properties and the possibilities of using, in particular, silver (Ag) and gold (Au) nanoparticles, as well as zinc oxide (ZnO) and titanium oxide (TiO2) nanoparticles as drug carriers and in the treatment of cancer. An important element of this subject is the possibility of occurrence of toxic effects of these nanoparticles. For this reason, possible mechanisms of toxic actions are presented, as well as methods used to reduce their toxicity to ensure the safety of drug carriers based on these nanostructures.

Safety of the application of nanosilver and nanogold in topical cosmetic preparations.

The safety of the use of cosmetic preparations with silver or gold nanoparticles was assessed. This study describes the methodology and results of research involving the generation of suspensions of silver and gold nanoparticles and creams with added silver or gold at concentrations of 20, 65, 110, 155, and 200 mg/kg. The silver nanoparticles ranged from 8 to 140 nm, and the gold nanoparticles, measured 13-99 nm. The sizes were determined using dynamic light scattering. The presence of metallic nanoparticles in the obtained oil-in-water emulsions was confirmed with UV-vis spectroscopy and transmission electron microscopy with an X-ray scattering spectrometer (TEM-EDX). Additionally, based on the TEM-EDX results, it was possible to analyse the distributions of the silver nanoparticles in the tested cosmetic emulsions. Microbiological tests showed that both the silver and gold nanoparticle emulsion possessed satisfactory fungicidal properties. Based on viscosity curves, the lowest estimated yield limits were achieved by the reference cream and the creams with the gold and silver nanoparticles at concentrations of 20 and 65 mg/kg, respectively, which improved their consistencies and distributions on the skin. The best appraisals from the respondents in terms of consistency, absorption, oiling, colour, and smell were received for the emulsion containing 200 mg/kg gold nanoparticles. The worst assessment in terms of uniformity, colour, and smell were obtained for the emulsion with 200 mg/kg silver nanoparticles. However, the most important aspect of this study was the assessment of the permeabilities of the metallic nanoparticles through imitation skin in the form of dermal membranes. The highest permeabilities were confirmed for the creams with metallic nanoparticles present at 110--200 mg/kg. This permeability is an issue of concern given the toxic properties of metallic nanoparticles for living organisms.

Analysis of the physicochemical properties of antimicrobial compositions with zinc oxide nanoparticles.

In this study, an antimicrobial composition based on polyvinyl alcohol (PVA) and zinc oxide (ZnO) was developed. The aim of the work was to obtain a film-forming product for antimicrobial treatment of surfaces. To improve the physical, mechanical, and film-forming properties of the compositions, three natural stabilizing agents were added to the formulation: gelatine, guar gum and hydroxyethyl cellulose. Formulations with different concentrations of each stabilizer were tested, and the physicochemical properties of the obtained products were measured. The size of zinc oxide particles in obtained compositions varied from 232 to 692 nm. The compositions had a slight acidic nature. Their pH ranged from 6.84 to 6.99. The average density of products was equal to 1.37 × 103 (kg/m3). It was confirmed that zinc oxide nanoparticles do not penetrate through a model dermal membrane which is a desired effect concerning their toxicity. The antimicrobial activity of the obtained compositions was assessed against Aspergillus niger strain. After 24 h of studying, the growth inhibition was in 71% greater than in reference material. After statistical analysis of the results, it was concluded in order to achieve the most desirable physicochemical and utilitarian properties, the concentrations of gelatine, guar gum and hydroxyethylcellulose should be equal to 0.5%, 0.03% and 0.055%, respectively.

Statistical Analysis of Optimal Ultrasound Emulsification Parameters in Thistle-Oil Nanoemulsions.

Thistle oil (INCI: Silybum marianum seed oil) is known as an anti-oxidant, moisturizing and skin regenerating cosmetic raw material. Nanoemulsions are a new form of cosmetic product showing very good user properties (ease of spreading over the skin with no greasy feeling). Moreover, due to their structure, they can also transport both hydrophilic and hydrophobic active substances to the skin. The aim of this work was the preparation and characterization of nanoemulsions, based on thistle oil. The non-ionic surfactants polysorbate 80 (PEG-20 sorbitan monooleate), decyl glucoside, and a polyglyceryl-4 ester blend were applied to stabilize the nanosystems. All formulations were obtained by a high energy method, using an ultrasonic device (Labsonic U, an ultrasound homogenizer). Variations in the emulsification parameters were tested, including surfactants concentration, pre-emulsification time, ultrasound power and sonication time. On the basis of statistical analysis (experimental design, cluster analysis, classification and regression trees) the best emulsification process parameters were determined. In order to verify the results of statistical analysis, once more an experimental study was conducted. The results obtained confirmed that statistical analysis can be a useful method in determining the conditions for obtaining stable nanoemulsions with desired properties. Formulations obtained with the use of Silybum marianum seed oil were characterized by long-term stability, a low polydispersity index, low viscosity and an average droplet size less than 200 nm.

Synthesis and evaluation of anti-inflammatory properties of silver nanoparticle suspensions in experimental colitis in mice.

The aim of our study was to investigate the effect of newly developed silver nanoparticle aqueous suspensions NanoAg1 and NanoAg2 in the mouse models mimicking ulcerative colitis and Crohn's disease. NanoAg1 and NanoAg2 were synthesized in aqueous medium with the involvement of tannic acid. To elucidate their anti-inflammatory activity, semi-chronic mouse models of inflammation induced by dextrane sulfate sodium addition to drinking water and intracolonic (i.c.) administration of 2,4,6-trinitrobenzenesulfonic acid were used. NanoAg1 and NanoAg2 (500 mg/dm3, 100 µl/animal, i.c., once daily) significantly ameliorated colitis in dextrane sulfate sodium- and 2,4,6-trinitrobenzenesulfonic acid-induced mouse models of colonic inflammation, as indicated by reduced macroscopic, ulcer and microscopic scores. The anti-inflammatory effect was dependent on the shape and diameter of silver nanoparticles, as indicated by weaker effect of NanoAg1 than NanoAg2. In addition, administration of NanoAg2, but not NanoAg1, modulated colonic microbiota, as indicated by reduced number of Escherichia coli and Clostridium perfringens, and increased number of Lactobacillus sp. Summarizing, NanoAg1 and NanoAg2 after administered i.c. effectively alleviate colitis in experimental models of ulcerative colitis and Crohn's disease in mice. Therefore, NanoAg1 and NanoAg2 administered i.c. have the potential to become valuable agents for the treatment of inflammatory bowel diseases.

Effect of Process Parameters on the Size and Shape of Nano- and Micrometric Zinc Oxide.

The paper presents a method of obtaining zinc oxide nano- and microparticles. In these studies microwave reactor and laboratory pressure reactor were used. Since microwave radiation accelerates proceeding of reactions, this way was found to be an effective method in the process of obtaining nanocrystallines of zinc oxide. The size of prepared particles rarely exceeded 500 nm.

Nanosilver Biocidal Properties and Their Application in Disinfection of Hatchers in Poultry Processing Plants.

The aim of this study was to use aqueous suspensions of silver nanoparticles with a wide spectrum of particle sizes, variable morphology, high stability, and appropriate physicochemical properties to examine their bactericidal and fungicidal properties against microorganisms present in poultry processing plants. At the same time, the particles were tested for preventing the production of odorogenous pollutants during incubation and thereby reducing the emission of harmful gases from such types of facilities. The results show that the use of nanosilver preparations in order to disinfect eggs and hatchers reduced microbiological contamination. The bactericidal and fungicidal efficacy of the applied preparation was comparable to UV radiation and its effectiveness increasing during the incubation. Good results were achieved in terms of the level of organic gaseous contaminants, which decreased by 86% after the application of the nanosilver preparation.

Online solid phase extraction liquid chromatography using bonded zwitterionic stationary phases and tandem mass spectrometry for rapid environmental trace analysis of highly polar hydrophilic compounds - Application for the antiviral drug Zanamivir.

Zanamivir (Za) is a highly polar and hydrophilic antiviral drug used for the treatment of influenza A viruses. Za has been detected in rivers of Japan and it's environmental occurrence has the risk of inducing antiviral resistant avian influenza viruses. In this study, a rapid automated online solid phase extraction liquid chromatography method using bonded zwitterionic stationary phases and tandem mass spectrometry (SPE/LC-MS/MS) for trace analysis of Za was developed. Furthermore, an internal standard (IS) calibration method capable of quantifying Za in Milli-Q, surface water, sewage effluent and sewage influent was evaluated. Optimum pre-extraction sample composition was found to be 95/5 v/v acetonitrile/water sample and 1% formic acid. The developed method showed acceptable linearities (r(2)≥0.994), filtration recovery (≥91%), and intra-day precisions (RSD≤16%), and acceptable and environmentally relevant LOQs (≤20ngL(-1)). Storage tests showed no significant losses of Za during 20 days and +4/-20°C (≤12%) with the exception of influent samples, which should be kept at -20°C to avoid significant Za losses. The applicability of the method was demonstrated in a study on phototransformation of Za in unfiltered and filtered surface water during 28 days of artificial UV irradiation exposure. No significant (≤12%) phototransformation was found in surface water after 28 days suggesting a relatively high photostability of Za and that Za should be of environmental concern.