Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 5 de 5
Filtrar
Más filtros










Base de datos
Intervalo de año de publicación
1.
J Acoust Soc Am ; 155(6): 3968-3982, 2024 Jun 01.
Artículo en Inglés | MEDLINE | ID: mdl-38921645

RESUMEN

Tone detection is crucial for passive sonar systems. Numerous algorithms have been developed for passive tone detection, but their effectiveness in detecting weak tones is still limited. To enhance noise resilience in passive tone detection, a broad-receptive field complex-valued structure named attention-driven complex-valued U-Net is proposed. Concretely, two attention mechanisms, namely, temporal attention and harmonic attention, are proposed to broaden the receptive field with high computational efficiency. Complex-valued operators are then introduced to mine both amplitude and phase information of tones. Additionally, a symmetric downsampling and upsampling strategy is proposed to improve the reconstruction accuracy of detailed time-frequency information. Overall, the proposed method demonstrates a strong robustness to noise and a strong ability to generalize. Experimental results on both simulated data and real-world data validate the superiority of the proposed attention-driven complex-valued U-Net against conventional U-shaped structures.

2.
J Acoust Soc Am ; 153(2): 1257, 2023 Feb.
Artículo en Inglés | MEDLINE | ID: mdl-36859166

RESUMEN

Target direction-of-arrival (DOA) estimation is often difficult in the presence of strong interference-especially when the target DOA is very close to the interference DOA-since the strong interference signal can mask the weak target signal and make the DOA estimation hard. To address this problem, an efficient sparse method for DOA estimation is proposed in this paper, in which the effect of strong interference on the target DOA estimation is significantly reduced. An on-grid version of the grid evolution technique is then developed to nonuniformly refine the grid, thereby reducing the computational complexity while retaining reasonable accuracy. Numerical simulations and experimental results demonstrate that, compared to state-of-art methods, the proposed method achieves higher efficiency and better DOA estimation performance in the presence of strong interference.

3.
Sensors (Basel) ; 20(23)2020 Dec 04.
Artículo en Inglés | MEDLINE | ID: mdl-33291843

RESUMEN

Array design is the primary consideration for array signal processing, and sparse array design is an important and challenging task. In underwater acoustic environments, the vector hydrophone array contains more information than the scalar hydrophone array, but there are few articles focused on the design of the vector hydrophone array. The difference between the vector hydrophone array and the scalar hydrophone array is that each vector hydrophone has three or four channels. When designing a sparse vector hydrophone array, these channels need to be optimized at the same time to ensure the sparsity of the array elements' number. To solve this problem, this paper introduced the compressed sensing (CS) theory into the vector hydrophone array design, constructed the vector hydrophone array design problem into a globally solvable optimization problem, proposed a CS-based algorithm with the L1 norm suitable for vector hydrophone array, and realized the simultaneous optimization of multiple channels from the same vector hydrophone. At the same time, the off-grid algorithm was added to obtain higher design accuracy. Two design examples verify the effectiveness of the proposed method. The theoretical analysis and simulation results show that compared with the conventional compressed sensing algorithm with the same aperture, the algorithm proposed in this paper used fewer vector hydrophone elements to obtain better fitting of the desired beam pattern.

4.
Sensors (Basel) ; 20(21)2020 Oct 24.
Artículo en Inglés | MEDLINE | ID: mdl-33114381

RESUMEN

Recently, the direction of arrival estimation with co-prime arrays has gradually been applied in underwater scenarios because of its significant advantages over traditional uniform linear arrays. Despite the advantages of co-prime arrays, the spatial spectra obtained directly from conventional beamforming can be degraded by grating lobes due to the sparse spatial sampling in passive sensing applications, which will seriously deteriorate the estimation performance. In this paper, capon beamforming is applied to a co-prime sensor array as a pretreatment before high-resolution direction of arrival (DOA) estimation methods. The amplitudes extracted from the beam-domain outputs of two subarrays and the phases extracted from the cross-spectrum of the spatial spectrum are exploited to suppress the spurious peaks in beam patterns and eliminate ambiguities. Consequently, interference can be further mitigated, and the performance of high-resolution DOA methods will be guaranteed. Simulations show that the method proposed can improve the reliability and accuracy of DOA estimation with great value in practice.

5.
Sensors (Basel) ; 20(1)2019 Dec 26.
Artículo en Inglés | MEDLINE | ID: mdl-31888073

RESUMEN

Direction of arrival (DOA) estimation via sensor array is a crucial component of any passive sonar signal processing technology. In certain practical applications, however, the interested far-field targets are frequently affected by near-field interference, which may result in degradation of DOA estimation. Aiming at the direction estimation problems of far-field targets under strong near-field interference, a unified sparse representation model of far-field and near-field hybrid sources is constructed according to the various correlations in steering vectors between the planar wave and spherical wave in this paper. A high-resolution spatial spectrum reconstruction algorithm based on a sparse Bayesian framework is then exploited to constrain the energy of near-field interference in the preset near-field steering vector over-complete dictionary, thus ensuring the accurate detection and estimation of far-field targets. An expectation-maximization (EM) algorithm approach is introduced to estimate the number of sources and noise power iteratively, which will reduce the dependence of the algorithm on such prior information. Several state-of-art algorithms are mentioned and discussed (Minimum Variance Distortionless Response (MVDR) method, Multiple Signal Classification (MUSIC) algorithm and conventional beamforming (CBF) algorithm) to compare with the one proposed in this manuscript that achieves higher accuracy of estimation and resolution under low SNR level with limited samples, which is verified by simulation and for the results obtained in an experimental case study.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA