RESUMEN
Objective To investigate the present professionalism of clinicians at public hospitals in China and its relationship with practicing environment and hospital management system. Methods From April 2015 to March 2016, 659 clinicians of 11 public hospitals, from Guandong, Hubei and Guangxi provinces, were recruited into the study based on multi-stage sampling. The questionnaire included professional attitude(20 items)and professional behavior(10 items).Descriptive statistics and spearman rank correlation analysis were applied for analysis.Results For professional attitude, 15 items were agreed by over 80% of respondents.All the positive professional behaviours were agreed by over 80% of respondents and all the negative professional behaviours were denied by less than 30% of respondents. Professional attitude was positively correlated with professional behaviour(r=0.157, P<0.01), practicing environment (r= 0.269, P < 0.01 ) and management system ( r = 0.199, P < 0.01). Professional behaviour was uncorrelated with practicing environment or management system ( P >0.05 ). Conclusions Clinicians at public hospitals in China present positive professional attitude which is correlated with professional behaviour, but they are not in high accordance with each other. Clinicians have low satisfaction with the practicing environment and management system, which are important factors influencing professional attitude of clinicians.
RESUMEN
OBJECTIVE: This study aims to determine the effect of fluoride concentration on the corrosion behavior of cobalt-chromium alloy fabricated by two different technology processes in a simulated oral environment. METHODS: A total of 15 specimens were employed with selective laser melting (SLM) and another 15 for traditional casting (Cast) in cobalt-chromium alloy powders and blocks with the same material composition. The corrosion behavior of the specimens was studied by potentiodynamic polarization test under different oral environments with varying solubilities of fluorine (0, 0.05%, and 0.20% for each) in acid artificial saliva (pH = 5.0). The specimens were soaked in fluorine for 24 h, and the surface microstructure was observed under a field emission scanning electron microscope after immersing the specimens in the test solution at constant temperature. RESULTS: The corrosion potential (Ecorr) value of the cobalt-chromium alloy cast decreased with increasing fluoride concentration in acidic artificial saliva. The Ecorr, Icorr, and Rp values of the cobalt-chromium alloy fabricated by two different technology processes changed significantly when the fluoride concentration was 0.20% (P < 0.05). The Ecorr, Icorr, and Rp values of the cobalt-chromium alloy fabricated by two different technology processes exhibited a statistically significant difference. The Icorr value of the cobalt-chromium alloy cast was higher than that in the SLM group cobalt-chromium alloy when the fluoride concentration was 0.20% (P < 0.05). The Ecorr, tRp alues of the cobalt-chromium alloy cast were lower htan those of the SLM group cobalt-chromium alloy when the fluoride concentration was 0.20% (P< 0 .05). CONCLUSION: Fluoride ions adversely affected the corrosion resistance of the cobalt-chromium alloy fabricated by two different technology processes. The corrosion resistance of the cobalt-chromium alloy cast was worse than that of the SLM group cobalt-chromium alloy when the fluoride concentration was 0.20%.
Asunto(s)
Corrosión , Aleaciones de Cromo , Fluoruros , Rayos Láser , Fosfatos , Saliva Artificial , Fluoruro de SodioRESUMEN
<p><b>OBJECTIVE</b>This study aims to determine the effect of fluoride concentration on the corrosion behavior of cobalt-chromium alloy fabricated by two different technology processes in a simulated oral environment.</p><p><b>METHODS</b>A total of 15 specimens were employed with selective laser melting (SLM) and another 15 for traditional casting (Cast) in cobalt-chromium alloy powders and blocks with the same material composition. The corrosion behavior of the specimens was studied by potentiodynamic polarization test under different oral environments with varying solubilities of fluorine (0, 0.05%, and 0.20% for each) in acid artificial saliva (pH = 5.0). The specimens were soaked in fluorine for 24 h, and the surface microstructure was observed under a field emission scanning electron microscope after immersing the specimens in the test solution at constant temperature.</p><p><b>RESULTS</b>The corrosion potential (Ecorr) value of the cobalt-chromium alloy cast decreased with increasing fluoride concentration in acidic artificial saliva. The Ecorr, Icorr, and Rp values of the cobalt-chromium alloy fabricated by two different technology processes changed significantly when the fluoride concentration was 0.20% (P < 0.05). The Ecorr, Icorr, and Rp values of the cobalt-chromium alloy fabricated by two different technology processes exhibited a statistically significant difference. The Icorr value of the cobalt-chromium alloy cast was higher than that in the SLM group cobalt-chromium alloy when the fluoride concentration was 0.20% (P < 0.05). The Ecorr, tRp alues of the cobalt-chromium alloy cast were lower htan those of the SLM group cobalt-chromium alloy when the fluoride concentration was 0.20% (P< 0 .05).</p><p><b>CONCLUSION</b>Fluoride ions adversely affected the corrosion resistance of the cobalt-chromium alloy fabricated by two different technology processes. The corrosion resistance of the cobalt-chromium alloy cast was worse than that of the SLM group cobalt-chromium alloy when the fluoride concentration was 0.20%.</p>
Asunto(s)
Aleaciones de Cromo , Corrosión , Fluoruros , Rayos Láser , Fosfatos , Saliva Artificial , Fluoruro de SodioRESUMEN
Objective To investigate the clinical effect of insulin on gestational diabetes mellitus(GDM).Methods GDM patients were randomly divided into group A and group B,group B were treated with short term intensive insulin pump therapy,and group A were treated with insulin pump in short term combined with biosynthetic human insulin therapy.Results The body mass index and diabetes family history rates pre-pregnancy in group B were significantly higher than group A(P<0.05).Logistic analysis showed that family history of BMI pre-pregnancy and diabetes family history were independent risk factors for GDM drug treatment(P<0.05).Compared with the group B,the improvement of blood glucose levels and the incidence of complications in patients with group A were better than the former(P<0.05).Conclusion Rational application of insulin can improve the efficacy of clinical treatment of GDM, reduce the incidence of complications, with high safety.
RESUMEN
OBJECTIVE: To evaluate the effect of microwave sintering on the translucency of zirconia and to compare these effect with those of conventional sintering. The relationship between the microstructure of specimens and translucency was investigated. METHODS: A total of 10 disc-shaped specimens were fabricated from 2 commercial brands of zirconia, namely, Zenostar and Lava. Each group included 5 discs. Conventional sintering was performed according to the manufacturers' specifications. The maximum temperature for Zenostar was 1,490 °C, whereas that for Lava was 1,500 °C. The dwelling time was 2 h. The sintering temperature for microwave sintering was 1,420 °C, heating rate was 15 °C · min⻹, and dwelling time was 30 min. After sintering, the translucency parameter (TP) of the specimens were measured with ShadeEye NCC. The sintered density of the specimens was determined by Archimedes' method. The grain size and microstructure of the specimens were investigated by scanning electron microscopy. RESULTS: Density and translucency slightly increased by microwave sintering, but no significant difference was found between microwave and conventional sintering (P > 0.05). Small and uniform microstructure were obtained from microwave sintering. The mean TP of Lava was significantly higher than that of Zenostar (P < 0.001). CONCLUSION: The translucency of zirconia sintered by microwave sintering is similar to that of the zirconia sintered by conventional sintering.
Asunto(s)
Cerámica/química , Diseño de Prótesis Dental/métodos , Tecnología Odontológica/métodos , Circonio/química , Calefacción , Ensayo de Materiales , Microscopía Electrónica de Rastreo , Microondas , Propiedades de SuperficieRESUMEN
<p><b>OBJECTIVE</b>To evaluate the effect of microwave sintering on the translucency of zirconia and to compare these effect with those of conventional sintering. The relationship between the microstructure of specimens and translucency was investigated.</p><p><b>METHODS</b>A total of 10 disc-shaped specimens were fabricated from 2 commercial brands of zirconia, namely, Zenostar and Lava. Each group included 5 discs. Conventional sintering was performed according to the manufacturers' specifications. The maximum temperature for Zenostar was 1,490 °C, whereas that for Lava was 1,500 °C. The dwelling time was 2 h. The sintering temperature for microwave sintering was 1,420 °C, heating rate was 15 °C · min⁻¹, and dwelling time was 30 min. After sintering, the translucency parameter (TP) of the specimens were measured with ShadeEye NCC. The sintered density of the specimens was determined by Archimedes' method. The grain size and microstructure of the specimens were investigated by scanning electron microscopy.</p><p><b>RESULTS</b>Density and translucency slightly increased by microwave sintering, but no significant difference was found between microwave and conventional sintering (P > 0.05). Small and uniform microstructure were obtained from microwave sintering. The mean TP of Lava was significantly higher than that of Zenostar (P < 0.001).</p><p><b>CONCLUSION</b>The translucency of zirconia sintered by microwave sintering is similar to that of the zirconia sintered by conventional sintering.</p>
Asunto(s)
Cerámica , Química , Diseño de Prótesis Dental , Métodos , Calefacción , Ensayo de Materiales , Microscopía Electrónica de Rastreo , Microondas , Propiedades de Superficie , Tecnología Odontológica , Métodos , Circonio , QuímicaRESUMEN
Objective To identify the imaging features of pancreatic acinar cell carcinomas.Methods Eleven patients of pancreatic acinar cell carcinomas proven surgically and pathologically were included.We retrospectively evaluated the CT and MR findings including the location, size, shape, margin, necrosis , calcification, hemorrhage, enhancement degree, enhancement pattern, invasion to other organs, perilesional lymph nodes, metastasis, recurrence.Results The tumors were distributed in the head(n=4), body and tail(n=4),tail(n=3) of pancreas.The median tumor size was 97 mm(27 to 180 mm).Nine cases presented with a well-defined enhancing capsule.Tumor vessels could be seen in 9 cases.Seven cases were hypovascular while the other 4 were hypervascular.Different extents of necrosis could be seen in all masses as a swirling or cleft low density in the enhanced tumors, with an median of 10% (2% to 25%).The hypovascular masses more frequently demonstrated a lobulated tumor, heterogeneous enhancement pattern, with a larger necrotic component and were more common invasion to other organs.Conclusions Pancreatic acinar ccll carcinoma typically presents as a sizable pancreatic mass with a well-defined enhancing capsule.
RESUMEN
Objective:To investigate the the retention force changes of 2 kinds of T bar clasps on Cr-Co crowns and the surface ab-rasion of the crowns.Methods:Standard Cr-Co crowns were made,and standard T bar clasps were made of Cr-Co alloy and Vitalli-um2000 with 0.25 mm and 0.5 mm undercut depth respectively.1 800 times repeated placement and removal(fatigue test)were car-ried out on instron testing machine in or without saliva soak condition.The attenuation curves of the maximum retention force was an-alysed.The surface abrasion of the crowns was observed before and after the fatigue test by SEM.Results:The retention force attenu-ation of the clasps in every group was accord with the logarithm attenuation law.SEMexamination showed that in the same condition, there was less surface abrasion in Vitallium2000 group than that in Cr-Co group.Vitallium2000 clasp was superior to Cr-Co clasp in maintaining the retention force.Conclusion:Vitallium2000 T bar clasp may provide better retention force with less furface abrasion on Cr-Co crown than Cr-Co clasp.
RESUMEN
Vitamin B1 self-assembled monolayer modified electrode (VB1-Au/SAMs/CME) was prepared and its electrochemical behavior was studied by cyclic voltammetry. The results showed that a self-assembled monolayer (SAM) was formed on the surface of gold electrode. \3-/4-redox couple was used as the electrochemical probe to study the electrochemical characteristics of SAM modified gold electrode and the results indicated that the existence of Vitamin B1 membrane on gold surface hindered the electron transfer. The electrochemical behaviors of dopamine(DA) and uric acid (UA) were investigated at VB1-Au/SAMs/CME. The results showed that the electrochemical oxidation of DA and UA could be electrocatalyzed. There were linear relationships between the anodic peak current and the concentration of DA(8.0×10-6-4.0×10-4 mol/L) and UA (6.0×10-5-2.2×10-4mol/L) respectively in differential pulse voltammograms. This modified electrode was effective to detect DA and UA in simultaneous determination of these species in a mixture.
RESUMEN
Objective To study the potential effect of gene-environment interaction between glutathione S-transferase M1 (GSTM1) and serum organochlorines residues on the risk of breast cancer in women, in China. Methods Seventy newly pathologically diagnosed female patients with breast cancer from September 2006 to October 2007 were selected as the cases from five large hospitals in Tangshan. The controls were identified at the same hospital as cases. 1∶1 matched case-control study. Between the cases and controls, the difference of age was not over two years and the residence was similar. The organochlorine residues levels in the serum were measured by gas chromatography (GC). Genotypes of GSTM1 polymorphisms were analyzed by multiplex allele-specific polymerase chain reaction (PCR). Interaction indexes (?) were calculated to determine the type of gene-environment interaction. Results After confounding factors adjusted, the result showed that interaction existed in genetic polymorphisms of GSTM1 and DDT, HCH residues, and interaction indexes (?) value were 1.237 and 1.379. Conclusion GSTM1 genetic polymorphisms and DDT, HCH may present an interaction in the development of breast cancer.
RESUMEN
A polymer film of vitamin B1 was obtained at a graphite carbon electrode by cyclic voltammetric method in phosphate buffer solution (PBS). Cyclic voltammograms of the film electrode in PBS (pH 5) exhibited one pair redox waves, Epa=350 mV,Epc=325 mV,different from monomer vitamin B1. The peak currents of poly-VB1 films was proportional to (scan rate)1/2, which showed that the charge transfer was controlled by diffusion in the polymer film. The Poly-VB1 modified electrode showed a good catalytic ability to dopamine and epinephrine. At the modified electrod, the peak potential for oxidation of dopamine occurred at 250 mV and 200 mV for epinephrine, while they were shifted towards the negative direction 100 mV and 300 mV respectively at the bare glassy carbon electrode . And their peak current had a linear relationship to the concentrations in the range of 8.0×10-7~1.0×10-4 mol/L for dopamine and 1.0×10-6~1.0×10-4 mol/L for epinephrine.
RESUMEN
Objective:Investigation about immunological pathogenesis of thrombocytopenic purpura was made.Methods:Th1 and Th2 cell number between thrombocytopenic purpura patients and normal people was detected by flow cemetry.Results:Th2 cell number in thrombocytopenic purpura patients was significantly higher than that in control group,whereas Th2 cell number in thrombocytopenic purpura patients was significantly lower than that in control group.Conclusion:The imbalance between Th1 and Th2 could partly explained the mechanism of thrombocytopenic purprua.