Biocompatible antibiotic-coupled nickel-titanium nanoparticles as a potential coating material for biomedical devices.

The challenges facing metallic implants for reconstructive surgery include the leaching of toxic metal ions, a mismatch in elastic modulus between the implant and the treated tissue, and the risk of infection. These problems can be addressed by passivating the metal surface with an organic substrate and incorporating antibiotic molecules. Nitinol (NiTi), a nickel-titanium alloy, is used in devices for biomedical applications due to its shape memory and superelasticity. However, unmodified NiTi carries a risk of localized nickel toxicity and inadequately supports angiogenesis or neuroregeneration due to limited cell adhesion, poor biomineralization, and little antibacterial activity. To address these challenges, NiTi nanoparticles were modified using self-assembled phosphonic acid monolayers and functionalized with the antibiotics ceftriaxone and vancomycin via the formation of an amide. Surface modifications were monitored to confirm that phosphonic acid modifications were present on NiTi nanoparticles and 100% of the samples formed ordered films. Modifications were stable for more than a year. Elemental composition showed the presence of nickel, titanium, and phosphorus (1.9% for each sample) after surface modifications. Dynamic light scattering analysis suggested some agglomeration in solution. However, scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy confirmed a particle size distribution of <100 nm, the even distribution of nanoparticles on coverslips, and elemental composition before and after cell culture. B35 neuroblastoma cells exhibited no inhibition of survival and extended neurites of approximately 100 µm in total length when cultured on coverslips coated with only poly-l-lysine or with phosphonic acid-modified NiTi, indicating high biocompatibility. The ability to support neural cell growth and differentiation makes modified NiTi nanoparticles a promising coating for surfaces in metallic bone and nerve implants. NiTi nanoparticles functionalized with ceftriaxone inhibited Escherichia coli and Serratia marcescens (SM6) at doses of 375 and 750 µg whereas the growth of Bacillus subtilis was inhibited by a dose of only 37.5 µg. NiTi-vancomycin was effective against B. subtilis at all doses even after mammalian cell culture. These are common bacteria associated with infected implants, further supporting the potential use of functionalized NiTi in coating reconstructive implants.

An evaluation of the cannabinoid content of the liquid and thermal degradation analysis of cannabis-labeled vape liquids.

Cannabidiol (CBD) vape pen usage has been on the rise given the changing political and scientific climate as well as the promotion of these delivery systems as a more accessible and lower-risk option for consumers. Despite being marketed as a safer way to use cannabis, CBD vape liquids are sold without restrictions or meticulous quality control procedures such as toxicological and clinical assessment, standards for product preservation, or investigative degradation analyses. Nine CBD-labeled vape liquid samples purchased and manufactured in the United States were evaluated and assessed for cannabinoid content. Quantification and validation of cannabinoids and matrix components was accomplished using gas and liquid chromatography with mass spectrometry analysis (GC-MS and LC-MS/MS) following liquid-liquid extraction with methanol. Samples degraded by temperature (analyzed by GC-MS) showed a greater disparity from the labeled CBD content compared with samples analyzed as purchased (by LC-MS/MS). Thermal degradation of the vape liquids showed increased levels of tetrahydrocannabinol (THC). Also, extended time and temperature degradation were evaluated in vape liquids by storing them for 15 months and then varying temperature conditions before analysis, which indicated CBD transformed into other cannabinoids leading to different cannabinoid content within the vape samples. Evaluation conducted on these vape liquids indicated the route of exposure, storage conditions, and length of storage could expose consumers to unintended cannabinoids and showed a concerning level of disagreement between the products' labeled cannabinoid content and the results generated by these analyses.

Quantification of Cannabis in Infused Consumer Products and Their Residues on Skin.

Cannabis consumer products are a $4.6 billion industry in the U.S. that is projected to exceed $14 billion by 2025. Despite an absence of U.S. Food and Drug Administration (FDA) regulation or clinical data, thousands of nutraceuticals, topical consumer products, and beauty products claim benefits of hemp or cannabidiol. However, a lack of required quality control measures prevents consumers from knowing the true concentration or purities of cannabis-labeled products. Thirteen over-the-counter consumer products were examined for the presence of cannabidiol (CBD), cannabinol (CBN), Δ9-tetrahydrocannabinol (THC), cannabidiolic acid (CBDA), and Δ9-tetrahydrocannabinolic acid A (THCA). Additionally, the efficacy of topical applications was investigated using a porcine skin model, in which particle size and zeta potential relate to skin permeability. Skin permeation was correlated to particle size and relative stability in skin-like conditions but not directly related to the CBD content, suggesting that topical products can be designed to enhance overall skin permeation. Of the products analyzed, all products have some traceable amount of cannabinoids, while seven products had multiple cannabinoids with quantifiable amounts. Overall, the need for further regulation is clear, as most products have apparent distinctions between their true and labeled contents.

Chemical Shift Tensors of Cimetidine Form A Modeled with Density Functional Theory Calculations: Implications for NMR Crystallography.

The principal components of the 13C chemical shift tensors for the ten crystallographically distinct carbon atoms of the active pharmaceutical ingredient cimetidine Form A have been measured using the FIREMAT technique. Density functional theory (DFT) calculations of 13C and 15N magnetic shielding tensors are used to assign the 13C and 15N peaks. DFT calculations were performed on cimetidine and a training set of organic crystals using both plane-wave and cluster-based approaches. The former set of calculations allowed several structural refinement strategies to be employed, including calculations utilizing a dispersion-corrected force field that was parametrized using 13C and 15N magnetic shielding tensors. The latter set of calculations featured the use of resource-intensive hybrid-DFT methods for the calculation of magnetic shielding tensors. Calculations on structures refined using the new force-field correction result in improved values of 15N magnetic shielding tensors (as gauged by agreement with experimental chemical shift tensors), although little improvement is seen in the prediction of 13C shielding tensors. Calculations of 13C and 15N magnetic shielding tensors using hybrid functionals show better agreement with experimental values in comparison to those using GGA functionals, independent of the method of structural refinement; the shielding of carbon atoms bonded to nitrogen are especially improved using hybrid DFT methods.

Moving towards fast characterization of polymorphic drugs by solid-state NMR spectroscopy.

Solid-state nuclear magnetic resonance (SS-NMR) spectroscopy has become a common technique to study polymorphism in pharmaceutical solids at high-resolution. However, high-throughput application of high resolution SS-NMR spectroscopy is severely limited by the long 1H spin-lattice relaxation (T1) that is common to solid phase compounds. Here, we demonstrate the use of paramagnetic relaxation reagents such as chromium (III) acetylacetonate (Cr(acac)3) and nickel (II) acetylacetonate (Ni(acac)2) for fast data acquisition by significantly reducing the T1 value for carbamazepine Forms I, II, III, and dihydrate, cimetidine Forms A and B, nabumetone Form I, and acetaminophen Form I polymorphs. High resolution 13C cross-polarization and magic angle spinning were used to measure T1 values for each polymorph. In order to confirm the absence of polymorphic transitions during SS-NMR experiments, powder x-ray diffraction was implemented. The amount of chromium ions incorporated by the recrystallization process was quantified by using inductively coupled plasma optical emission spectroscopy. Our results suggest that the paramagnetic ions added to the polymorphs do not affect the polymorphic transformation or the quality of NMR spectra. We believe that this successful demonstration of fast data collection will enable high-throughput utilization of SS-NMR techniques to study polymorphic solids and could set the groundwork for NMR crystallography studies.

Study of Perfluorophosphonic Acid Surface Modifications on Zinc Oxide Nanoparticles.

In this study, perfluorinated phosphonic acid modifications were utilized to modify zinc oxide (ZnO) nanoparticles because they create a more stable surface due to the electronegativity of the perfluoro head group. Specifically, 12-pentafluorophenoxydodecylphosphonic acid, 2,3,4,5,6-pentafluorobenzylphosphonic acid, and (1H,1H,2H,2H-perfluorododecyl)phosphonic acid have been used to form thin films on the nanoparticle surfaces. The modified nanoparticles were then characterized using infrared spectroscopy, X-ray photoelectron spectroscopy, and solid-state nuclear magnetic resonance spectroscopy. Dynamic light scattering and scanning electron microscopy-energy dispersive X-ray spectroscopy were utilized to determine the particle size of the nanoparticles before and after modification, and to analyze the film coverage on the ZnO surfaces, respectively. Zeta potential measurements were obtained to determine the stability of the ZnO nanoparticles. It was shown that the surface charge increased as the alkyl chain length increases. This study shows that modifying the ZnO nanoparticles with perfluorinated groups increases the stability of the phosphonic acids adsorbed on the surfaces. Thermogravimetric analysis was used to distinguish between chemically and physically bound films on the modified nanoparticles. The higher weight loss for 12-pentafluorophenoxydodecylphosphonic acid and (1H,1H,2H,2H-perfluorododecyl)phosphonic acid modifications corresponds to a higher surface concentration of the modifications, and, ideally, higher surface coverage. While previous studies have shown how phosphonic acids interact with the surfaces of ZnO, the aim of this study was to understand how the perfluorinated groups can tune the surface properties of the nanoparticles.

Structural and Physicochemical Aspects of Dasatinib Hydrate and Anhydrate phases.

Crystal structures for the commercial monohydrate form and an anhydrate form of dasatinib, an oral anti-cancer agent, are presented along with characterization by Raman spectroscopy, powder X-ray diffraction, differential scanning calorimetry, and thermogravimetric analysis. Solubility measurements conducted in water reveal the anhydrate has dramatically improved solubility compared to the commercial hydrate form. Finally, dasatinib is a rare example of a promiscuous solvate former and the basis for this behavior can now be understood by examining the poor packing efficiency in the unsolvated form.

Polymorphs and hydrates of acyclovir.

Acyclovir (ACV) has been commonly used as an antiviral for decades. Although the crystal structure of the commercial form, a 3:2 ACV/water solvate, has been known since 1980s, investigation into the structure of anhydrous ACV has been limited. Here, we report the characterization of four anhydrous forms of ACV and a new hydrate in addition to the known hydrate. Two of the anhydrous forms appear as small needles and are stable to air exposure, whereas the third form is morphologically similar but quickly absorbs water from the atmosphere and converts back to the commercial form. The high-temperature modification is achieved by heating anhydrous form I above 180 °C. The crystal structures of anhydrous form I and a novel hydrate are reported for the first time.

Understanding organic film behavior on alloy and metal oxides.

Native oxide surfaces of stainless steel 316L and Nitinol alloys and their constituent metal oxides, namely nickel, chromium, molybdenum, manganese, iron, and titanium, were modified with long chain organic acids to better understand organic film formation. The adhesion and stability of films of octadecylphosphonic acid, octadecylhydroxamic acid, octadecylcarboxylic acid, and octadecylsulfonic acid on these substrates were examined in this study. The films formed on these surfaces were analyzed by diffuse reflectance infrared Fourier transform spectroscopy, contact angle goniometry, atomic force microscopy, and matrix-assisted laser desorption ionization mass spectrometry. The effect of the acidity of the organic moiety and substrate composition on the film characteristics and stability is discussed. Interestingly, on the alloy surfaces, the presence of less reactive metal sites does not inhibit film formation.

Polystyrene formation on monolayer-modified nitinol effectively controls corrosion.

A surface-initiated polymerization of styrene on carboxylic acid terminated phosphonic monolayers was utilized to increase the corrosion resistance of nitinol and nickel oxide surfaces. Alkyl chain ordering, organic reactions, wettability, and film quality of the monolayers and polymers were determined by infrared spectroscopy, atomic force microscopy, matrix-assisted laser desorption ionization spectrometry, and water contact angles. The polystyrene film proved to be a better corrosion barrier than phosphonic acid monolayers by analysis with cyclic voltammetry and electrochemical impedance spectroscopy. The protection efficiency of the polystyrene film on nitinol was 99.4% and the monolayer was 42%.

Study of the formation of self-assembled monolayers on nitinol.

Shape memory alloys such as nitinol (NiTi) have gained interest due to their unique and unusual properties of thermal shape memory, superelasticity, and good damping properties. Nitinol is mainly used for medical purposes. In order to control the surface properties of this alloy, self-assembled monolayers (SAMs) were formed and characterized on the native oxide surface of nitinol for the first time. Factors which affect the formation of SAMs, such as head group functionality, chain length, and tail group functionality, were varied and analyzed. Functionalized alkyl phosphonic acid molecules (OH, COOH, and CH3) formed monolayers on the nitinol surface using a simple deposition method resulting in the molecules being ordered and strongly bound to the surface. Diffuse reflectance infrared spectroscopy (DRIFT), contact angle goniometry, atomic force microscopy (AFM), and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) were used to characterize the surfaces before and after organic modification.