Development of in-house lattice-Boltzmann simulator of bioreactors for wastewater treatment: basic concepts and initial results.

While computational modelling has increasingly supported wastewater bioreactor engineering, novel numerical techniques have been developed such as the lattice-Boltzmann method (LBM). With vinasse treatment as case study, this work is a first step towards a comprehensive LBM simulator of a continuous-flow anaerobic packed-bed reactor. Extensions from typical models comprise one-dimensional (besides time) dependence, species transport via convection and diffusion, and imposition of either Dirichlet or Danckwerts condition at inlet. The LBM simulator proved to be operational when simulating the bioreactor at different hydraulic retention times (HRTs). Simulated profiles show that stepwise feeding concentrations are smoothed as they are transported towards the bioreactor exit while concentrations increase or decrease in response to generation or degradation kinetics. Good fitting was observed for concentrations of acetic acid (2.1 kg-COD/m3 for HRT = 24 h) and butyric acid (1.3 kg-COD/m3 for HRT = 16 h) at the exit whereas other concentrations were numerically simulated at proper order of magnitude.

Radon exhalation from phosphogypsum building boards: symmetry constraints, impermeable boundary conditions and numerical simulation of a test case.

Comprehensive understanding of (222)Rn exhalation from phosphogypsum-bearing building material and its accumulation in indoor air is likely to rely on numerical simulation, particularly if transient effects, three-dimensional domains and convection are to be included and investigated. Yet, experimental data and analytical results are helpful (if not crucial) as far as validation is concerned. Having in mind computational code simplicity and in the light of a recent experimental and theoretical report on (222)Rn release from phosphogypsum boards for housing panels, this paper presents and discusses an alternative testing set-up and the corresponding boundary conditions, namely one side of the panel bounded by impermeable wall. Although this is a new facility to be tested, the resultant steady-state one-dimensional diffusion-dominant analytical solution is shown to match the counterpart deduced in the aforementioned previous report, despite it relaxes the constraint of symmetry about the phosphogypsum board centerline, which is inferred in that prior experimental scenario. In addition, numerical results are conducted for a diffusion-dominant two-dimensional time-varying test case concerning (222)Rn accumulation in a closed chamber having an exhaling phosphogypsum board tightly placed at one wall.