Magnetic N-doped carbon derived from mixed ligands MOF as effective electrochemiluminescence coreactor for performance enhancement of SARS-CoV-2 immunosensor.

COVID-19 as an infectious disease with rapid transmission speed is caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), so, early and accurate diagnostics of COVID-19 is quite challenging. In this work, the selective and sensitive self-enhanced ECL method to detect of SARS-CoV-2 protein was designed with magnetic N-doped carbon derived from dual-ligand metal-organic frameworks (MOF) (CoO@N-C) with the primary and tertiary amino groups as a novel coreactant that covalently combined with Ru(bpy)2(phen-NH2)2+ as electrochemiluminescence (ECL) emitter. Mixed-ligand strategy and selected nitrogen-containing ligands, 4,4',4''-((1,3,5-triazine-2,4,6-triyl) tris-(azanediyl)) tribenzoic acid (H3TATAB) with 2-aminoterephthalic acid (BDC-NH2) were used for synthesis of the proposed MOF. Also, magnetic CoO@N-C with high synergistically charge transfer kinetics and good stability can be used as an effective platform/coreactor on the ITO electrode which load more Ru-complex as signal producing compound and SARS-CoV-2 N protein antibody to increase the sensitivity of the immunosensor. Furthermore, (CoO@N-C) as coreactor improved the ECL signal of the Ru (II)-complex more than 2.1 folds compared to tripropylamine. In view of these competences, the novel "on-off" ECL biosensor performed with great stability and repeatability for detection of SARS-CoV-2 protein, which exhibited a broad linearity from 8 fg. mL-1 to 4 ng. mL-1 (6 order of magnitude) and an ultra-low limit of detection 1.6 fg. mL-1. Finally, this proposed method was successfully applied to detect of SARS-CoV-2 N protein in serum sample with satisfactory results, indicating the proposed immunosensor has the potential for quick analysis of SARS-CoV-2.

Hierarchical machine learning model predicts antimicrobial peptide activity against Staphylococcus aureus.

Introduction: Staphylococcus aureus is a dangerous pathogen which causes a vast selection of infections. Antimicrobial peptides have been demonstrated as a new hope for developing antibiotic agents against multi-drug-resistant bacteria such as S. aureus. Yet, most studies on developing classification tools for antimicrobial peptide activities do not focus on any specific species, and therefore, their applications are limited. Methods: Here, by using an up-to-date dataset, we have developed a hierarchical machine learning model for classifying peptides with antimicrobial activity against S. aureus. The first-level model classifies peptides into AMPs and non-AMPs. The second-level model classifies AMPs into those active against S. aureus and those not active against this species. Results: Results from both classifiers demonstrate the effectiveness of the hierarchical approach. A comprehensive set of physicochemical and linguistic-based features has been used, and after feature selection steps, only some physicochemical properties were selected. The final model showed the F1-score of 0.80, recall of 0.86, balanced accuracy of 0.80, and specificity of 0.73 on the test set. Discussion: The susceptibility to a single AMP is highly varied among different target species. Therefore, it cannot be concluded that AMP candidates suggested by AMP/non-AMP classifiers are able to show suitable activity against a specific species. Here, we addressed this issue by creating a hierarchical machine learning model which can be used in practical applications for extracting potential antimicrobial peptides against S. aureus from peptide libraries.

Applicability of a Green Nanocomposite Consisted of Spongin Decorated Cu2WO4(OH)2 and AgNPs as a High-Performance Aptasensing Platform in Staphylococcus aureus Detection.

This study reports the synthesis of a nanocomposite consisting of spongin and its applicability in the development of an aptasensing platform with high performance. The spongin was carefully extracted from a marine sponge and decorated with copper tungsten oxide hydroxide. The resulting spongin-copper tungsten oxide hydroxide was functionalized by silver nanoparticles and utilized in electrochemical aptasensor fabrication. The nanocomposite covered on a glassy carbon electrode surface amplified the electron transfer and increased active electrochemical sites. The aptasensor was fabricated by loading of thiolated aptamer on the embedded surface via thiol-AgNPs linkage. The applicability of the aptasensor was tested in detecting the Staphylococcus aureus bacterium as one of the five most common causes of nosocomial infectious diseases. The aptasensor measured S. aureus under a linear concentration range of 10-108 colony-forming units per milliliter and a limit of quantification and detection of 12 and 1 colony-forming unit per milliliter, respectively. The highly selective diagnosis of S. aureus in the presence of some common bacterial strains was satisfactorily evaluated. The acceptable results of the human serum analysis as the real sample may be promising in the bacteria tracking in clinical samples underlying the green chemistry principle.

Application of polysaccharide biopolymers as natural adsorbent in sample preparation.

Preparing samples for analyses is perhaps the most important part to analyses. The varied functional groups present on the surface of biopolymers bestow them appropriate adsorption properties. Properties like biocompatibility, biodegradability, presence of different surface functional group, high porosity, considerable absorption capacity for water, the potential for modification, etc. turn biopolymers to promising candidates for varied applications. In addition, one of the most important parts of determination of an analyte in a matrix is sample preparation step and the efficiency of this step in solid phase extraction methods is largely dependent on the type of adsorbent used. Due to the unique properties of biopolymers they are considered an appropriate choice for using as sorbent in sample preparation methods that use from a solid adsorbent. Many review articles have been published on the application of diverse adsorbents in sample preparation methods, however despite the numerous advantages of biopolymers mentioned; review articles in this field are very few. Thus, in this paper we review the reports in different areas of sample preparation that use polysaccharides-based biopolymers as sorbents for extraction and determination of diverse organic and inorganic analytes.

Nano-architecture of MOF (ZIF-67)-based Co3O4 NPs@N-doped porous carbon polyhedral nanocomposites for oxidative degradation of antibiotic sulfamethoxazole from wastewater.

Co3O4 NPs in N-doped porous carbon (Co3O4 NPs@N-PC) materials were prepared by one-pot pyrolysis of a ZIF-67 powder under N2 atmosphere and followed by oxidation under air atmosphere (200 °C) toward promotion catalytic activity and activation of peroxymonosulfate (PMS) to degradation sulfamethoxazole (SMZ). 2-methylimidazole was used as a nitrogen source and a competitive ligand for the synthesis of Co3O4 NPs@N-PC, which in addition to affecting nucleation and growth of the crystal, promotes the production of active Co-N sites. Co3O4 NPs@N-PC nano-architecture has high specific surface areas (250 m2 g-1) and is a non-toxic, effective and stable PMS activator. The effect of operating parameters including SMZ concentration, catalyst dosage, temperature and pH in the presence of Co3O4 NPs@N-PC was investigated. The Co3O4 NPs@N-PC composite showed superior performance in activating PMS over a wide range of pH (2-10) and different temperatures so that complete degradation of SMZ (50 µM, 100 mL) was achieved within 15 min. The role of Co2+/Co3+ redox system in the mechanism before and after PMS activation was determined using XPS analysis. Surface-generated radicals led to the degradation of SMZ, in which the SMZ degradation rate attained 0.21 min-1 with the mineralization of 36.8%. The feasible degradation mechanism of SMZ was studied in the presence of different scavengers and it was revealed that the degradation reaction proceeds from the radical/non-radical pathway and in this process most of the SO4- and OH radicals are dominant. The recoverability and reuse of Co3O4 NPs@N-PC were evaluated to confirm its stability and potential for SMZ degradation and it was observed that the catalyst maintains its catalytic power for at least 5 cycles.

Utility of Biogenic Iron and Its Bimetallic Nanocomposites for Biomedical Applications: A Review.

Nanotechnology mainly deals with the production and application of compounds with dimensions in nanoscale. Given their dimensions, these materials have considerable surface/volume ratios, and hence, specific characteristics. Nowadays, environmentally friendly procedures are being proposed for fabrication of Fe nanoparticles because a large amount of poisonous chemicals and unfavorable conditions are needed to prepare them. This work includes an inclusive overview on the economical and green procedures for the preparation of such nanoparticles (flower, fruits, tea, carbohydrates, and leaves). Pure and bimetallic iron nanoparticles, for instance, offer a high bandwidth and excitation binding energy and are applicable in different areas ranging from antibacterial, anticancer, and bioimaging agents to drug delivery systems. Preparation of nano-sized particles, such as those of Fe, requires the application of high quantities of toxic materials and harsh conditions, and naturally, there is a tendency to develop more facile and even green pathways (Sultana, Journal of Materials Science & Technology, 2013, 29, 795-800; Bushra et al., Journal of hazardous materials, 2014, 264, 481-489; Khan et al., Ind. Eng. Chem. Res., 2015, 54, 76-82). This article tends to provide an overview on the reports describing green and biological methods for the synthesis of Fe nanoparticles. The present review mainly highlights selenium nanoparticles in the biomedical domain. Specifically, this review will present detailed information on drug delivery, bioimaging, antibacterial, and anticancer activity. It will also focus on procedures for their green synthesis methods and properties that make them potential candidates for various biomedical applications. Finally, we provide a detailed future outlook.

Nano-architectural design of TiO2 for high performance photocatalytic degradation of organic pollutant: A review.

In the past several decades, significant efforts have been paid toward photocatalytic degradation of organic pollutants in environmental research. During the past years, titanium dioxide nano-architectures (TiO2 NAs) have been widely used in water purification applications with photocatalytic degradation processes under Uv/Vis light illumination. Photocatalysis process with nano-architectural design of TiO2 is viewed as an efficient procedure for directly channeling solar energy into water treatment reactions. The considerable band-gap values and the subsequent short life time of photo-generated charge carriers are showed among the limitations of this approach. One of these effective efforts is the using of oxidation processes with advance semiconductor photocatalyst NAs for degradation the organic pollutants under UV/Vis irradiation. Among them, nano-architectural design of TiO2 photocatalyst (such as Janus, yolk-shell (Y@S), hollow microspheres (HMSs) and nano-belt) is an effective way to improve oxidation processes for increasing photocatalytic activity in water treatment applications. In the light of the above issues, this study tends to provide a critical overview of the used strategies for preparing TiO2 photocatalysts with desirable physicochemical properties like enhanced absorption of light, low density, high surface area, photo-stability, and charge-carrier behavior. Among the various nanoarchitectural design of TiO2, the Y@S and HMSs have created a great appeal given their considerable large surface area, low density, homogeneous catalytic environment, favorable light harvesting properties, and enhanced molecular diffusion kinetics of the particles. In this review was summarized the developments that have been made for nano-architectural design of TiO2 photocatalyst. Additional focus is placed on the realization of interfacial charge and the possibility of achieving charge carriers separation for these NAs as electron migration is the extremely important factor for increasing the photocatalytic activity.

Adsorption of Cationic Dyes on a Magnetic 3D Spongin Scaffold with Nano-Sized Fe3O4 Cores.

The renewable, proteinaceous, marine biopolymer spongin is yet the focus of modern research. The preparation of a magnetic three-dimensional (3D) spongin scaffold with nano-sized Fe3O4 cores is reported here for the first time. The formation of this magnetic spongin-Fe3O4 composite was characterized by X-ray diffraction (XRD), thermogravimetric analysis (TGA), differential thermal analysis (DTA) (TGA-DTA), vibrating sample magnetometer (VSM), Fourier-transform infrared spectroscopy (FTIR), and zeta potential analyses. Field emission scanning electron microscopy (FE-SEM) confirmed the formation of well-dispersed spherical nanoparticles tightly bound to the spongin scaffold. The magnetic spongin-Fe3O4 composite showed significant removal efficiency for two cationic dyes (i.e., crystal violet (CV) and methylene blue (MB)). Adsorption experiments revealed that the prepared material is a fast, high-capacity (77 mg/g), yet selective adsorbent for MB. This behavior was attributed to the creation of strong electrostatic interactions between the spongin-Fe3O4 and MB or CV, which was reflected by adsorption mechanism evaluations. The adsorption of MB and CV was found to be a function of pH, with maximum removal performance being observed over a wide pH range (pH = 5.5-11). In this work, we combined Fe3O4 nanoparticles and spongin scaffold properties into one unique composite, named magnetic spongin scaffold, in our attempt to create a sustainable absorbent for organic wastewater treatment. The appropriative mechanism of adsorption of the cationic dyes on a magnetic 3D spongin scaffold is proposed. Removal of organic dyes and other contaminants is essential to ensure healthy water and prevent various diseases. On the other hand, in many cases, dyes are used as models to demonstrate the adsorption properties of nanostructures. Due to the good absorption properties of magnetic spongin, it can be proposed as a green and uncomplicated adsorbent for the removal of different organic contaminants and, furthermore, as a carrier in drug delivery applications.

Extreme Biomimetics: Designing of the First Nanostructured 3D Spongin-Atacamite Composite and its Application.

The design of new composite materials using extreme biomimetics is of crucial importance for bioinspired materials science. Further progress in research and application of these new materials is impossible without understanding the mechanisms of formation, as well as structural features at the molecular and nano-level. It presents a challenge to obtain a holistic understanding of the mechanisms underlying the interaction of organic and inorganic phases under conditions of harsh chemical reactions for biopolymers. Yet, an understanding of these mechanisms can lead to the development of unusual-but functional-hybrid materials. In this work, a key way of designing centimeter-scale macroporous 3D composites, using renewable marine biopolymer spongin and a model industrial solution that simulates the highly toxic copper-containing waste generated in the production of printed circuit boards worldwide, is proposed. A new spongin-atacamite composite material is developed and its structure is confirmed using neutron diffraction, X-ray diffraction, high-resolution transmission electron microscopy/selected-area electron diffraction, X-ray photoelectron spectroscopy, near-edge X-ray absorption fine structure spectroscopy, and electron paramagnetic resonance spectroscopy. The formation mechanism for this material is also proposed. This study provides experimental evidence suggesting multifunctional applicability of the designed composite in the development of 3D constructed sensors, catalysts, and antibacterial filter systems.

Determination of arsenic species using functionalized ionic liquid by in situ dispersive liquid-liquid microextraction followed by atomic absorption spectrometry.

Synthesis and application of a task-specific ionic liquids (TSILs) as extracting solvents or chelating agents in dispersive liquid-liquid micro-extraction (DLLME) was evaluated. The developed method was based on the use of an ammonium pyrrolidine dithiocarbamate (APDC) bonded ionic liquid for chelation with As(III), followed by conversion of the As(III) chelated TSIL to a hydrophobic ionic liquid using KPF6 as an anion-exchange reagent. As(V) was reduced to As(III), using a 2/1 w/w blend of KI and Na2S2O3 and then the total amount of As was measured through ETAAS analysis. Under optimal conditions, linear dynamic ranges of 0.2-15 ng mL-1 and 0.2-20 ng mL-1 were observed in the determination of As(III) and total As respectively. The relative standard deviations (RSD%, n = 5) for the determination of As(III) (10 ng mL-1) was 3.2% and the limits of detection and quantitation were determined to be 0.01 ng mL-1 and 0.0.034 ng mL-1; respectively.

Voltammetric measurement of entacapone in the presence of other medicines against Parkinson's disease by a screen-printed electrode modified with sulfur-tin oxide nanoparticles.

A screen-printed electrode (SPE) is described modified with sulfur-tin oxide nanoparticles (S@SnO2NP) for the determination of entacapone (ENT) in the presence of other medicines against Parkinson's disease (PD). The S@SnO2NP was synthesized through the hydrothermal method and used in the modification of the SPE. The smart utilization of the S@SnO2NP and the SPE provided excellent properties such as high surface area and current density amplification by embedding an efficient sensing interface for highly selective electrochemical measurement. Under optimized experimental conditions, the anodic peak current related to the ENT oxidation onto the sensor surface at 0.46 V presented a linear response towards different ENT concentration sin the range 100 nM to 75 µM. The limit of detection (LOD) and electrochemical sensitivity were estimated to be 0.010 µM and 2.27 µA·µM-1·cm-2, respectively. The applicability of the sensor was evaluated during ENT determination in the presence of other conventional medicines againts, including levodopa (LD), carbidopa (CD), and pramipexole (PPX). The results of the analysis of human urine and pharmaceutical formulation as real samples using the developed sensor were in good agreement withre sults of high-performance liquid chromatography (HPLC) as a standard method. These findings demonstrated that the strategy based on the SPE is a cost-effective platform creating a promising candidate for practical determination of ENT in routine clinical testing.Graphical abstract.

Highly efficient sunitinib release from pH-responsive mHPMC@Chitosan core-shell nanoparticles.

This study reports developing novel smart drug delivery systems (DDS) that have great importance in anticancer therapeutics. The magnetic hydroxypropyl methylcellulose (mHPMC) synthesized via in situ method and introduced in the fabrication of tripolyphosphate (TPP)-cross-linked chitosan core-shell nano-carriers (mHPMC@Chitosan). The TPP-cross-linked mHPMC@Chitosan nano-carriers then characterized using TEM, SEM/EDS, DLS, XPS, FTIR, TGA, XRD, and VSM. The encapsulation efficiency showed high capacity of loading for sunitinib malate (above 86 % for all samples). At pH 7.4, the minimum content of drug release was observed for all samples fabricated with variable contents of chitosan. At pH 4.5, the effect of chitosan content revealed that the rate of sunitinib release tends to decrease as its content increased. During two days, 44 and 93 % of the loaded sunitinib released from carriers containing high and low contents of chitosan, respectively. Besides, this mHPMC@Chitosan core shell nano-carrier shown pH-sensitive drug release.

Earlier diagnoses of acute leukemia by a sandwich type of electrochemical aptasensor based on copper sulfide-graphene composite.

Due to high affinity and specificity of aptamers, they are widely considered for construction of aptasensor to specific recognizing of analytes in biological complex matrix. So, in this work we design a high selective and sensitive aptasensor for leukemia cancer cells (CCRF-CEM) via superior catalytic effect of copper sulfide-graphene (CuS-GR) nanocomposite as label and Au-GR nanocomposite as sensing platform. The CuS-GR nano-composite (label component) is CuS nanoparticles that wrapping on graphene sheets. Its catalytic activity (CuS-GR) increases the current of sensor in parallel with adding of CCRF-CEM and provide sensitive detection of analytes. The detailed of signal amplification and effect on the aptasensor performance completely discussed. This sensor has a linear range of 50-1 × 106 cell mL-1, with a limit of detection of 18 cell mL-1. Also, the developed aptasensor has a significance specificity, high sensitivity and accuracy. It was used for the identification of CCRF-CEM cells in blood samples.

Heterojunction of N/B/RGO and g-C3N4 anchored magnetic ZnFe2O4@ZnO for promoting UV/Vis-induced photo-catalysis and in vitro toxicity studies.

To promote the low photocatalytic efficiency caused by the recombination of electron/hole pairs and widen the photo-response wavelength window, ZnFe2O4@ZnO-N/B/RGO and ZnFe2O4@ZnO-C3N4 ternary heterojunction nanophotocatalysts were designed and successfully prepared through a sol-gel technique. In comparison to bare ZnFe2O4 and ZnO, the ZnFe2O4-ZnO@N/B/RGO and ZnFe2O4@ZnO-C3N4 ternary products showed highly improved photocatalytic properties in the degradation of methyl orange (MO) under ultra-violet (UV) and visible light irradiation. Various physicochemical properties of the photocatalysts were evaluated through field emission scanning electron microscopy (FESEM), energy-dispersive X-ray (EDX) analysis, X-ray diffraction (XRD), UV-visible diffuse reflectance spectroscopy (DRS), Fourier transform infrared spectroscopy (FT-IR), and vibrating sample magnetometer (VSM) techniques. The observations indicated that the ternary heterojuncted ZnFe2O4@ZnO-N/B/RGO absorbs lower energy visible light wavelengths, which is an enhancement in the photocatalytic properties of ZnFe2O4@ZnO loaded on reduced graphene oxide (RGO) nanosheets and graphite-like carbon nitride (g-C3N4). This gives the catalyst photo-Fenton degradation properties.

Supercritical Fluid Extraction of Pesticides and Insecticides from Food Samples and Plant Materials.

The principal intention of this study is presenting the attempts carried out for extracting, separating, and determining of the pesticide and insecticide residues existing in food and plant samples. In this regard, a set of content, including the explanations about the supercritical fluid extraction (SFE), supercritical fluid chromatography, and various types of pesticides are indicated. Besides, the parameters affecting the pesticides extraction composed of temperature, pressure, modifier, drying agent, and so on are discussed. Also, examples of insecticides extraction by SFE technique as an important subset of pesticides are indicated. Along with these items, some interesting works, concerning the innovations implemented in the field of SFE of pesticide and insecticide residues from foodstuff and plants are depicted.

Rapid photodegradation and detection of zolpidem over ß-SnWO4 and α-SnWO4 nanoparticles: optimization and mechanism.

We reported the tin (II) tungstate nanoparticles as the photocatalyst and sensor modifier that were synthesized via chemical precipitation reaction and optimized thru the Taguchi design method. The method predicted the best synthesis conditions that led to smaller particles and desired morphologies. Different techniques were used to characterize the chemical structure, morphology, and purity of the nanoparticles. The photocatalytic behavior of different crystalline forms of the SnWO4 nanoparticles (α and ß) was considered by photodegradation of methylene orange and zolpidem under UV light irradiation, while the average size of ß-SnWO4 and α-SnWO4 nanoparticles prepared in optimum conditions is about 17 nm and 20 nm, respectively. Efficiencies of degradation of methyl orange and zolpidem on ß-SnWO4, in the presence of UV irradiation, were 93% and 98% and in the presence of α-SnWO4 were 73% and 82% after 2100 s, respectively. Voltammetric sensing of zolpidem was designed by modification of carbon paste electrode via ß-SnWO4 nanoparticles and investigated for determination of the drug in aqueous solution.

Electrochemical Oxidation and Determination of Antiviral Drug Acyclovir by Modified Carbon Paste Electrode With Magnetic CdO Nanoparticles.

With the development of nanomaterials in electrochemical sensors, the use of nanostructures to modify the electrode surface has been shown to improve the kinetics of the electron transfer process. In this study, a sensor was developed for the electrochemical determination of Acyclovir (ACV) based on the modified carbon paste electrode (CPE) by CdO/Fe3O4. The magnetic CdO nanoparticles characterization was studied by energy-dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD). To study of the modified CPE surface morphology, scanning electron microscopy (SEM) was used. At the optimal conditions, a noteworthy enhancement in the electrochemical behavior of ACV was observed at the surface of the modified CPE compared to the unmodified CPE. A detection limit of 300 nM and a linear range of 1-100 µM were obtained for the quantitative monitoring of ACV at the modified CPE surface using differential pulse voltammetry (DPV) in phosphate buffer. The RSD% (relative standard deviation) of the electrode response was <4.3% indicating the development of a high precision method. Also, satisfactory results were obtained in the determination of ACV with the modified electrode in tablet, blood serum, and urine samples with a satisfactory relative recovery (RR%) in the range of 94.0-104.4%.

A noble electrochemical sensor based on TiO2@CuO-N-rGO and poly (L-cysteine) nanocomposite applicable for trace analysis of flunitrazepam.

Flunitrazepam or date rape medication with trade name of Rohypnol belongs to the benzodiazepines branch that is used as a sedative, anesthetic, anticonvulsant, muscle relaxant, and antianxiety drug. It is known as "drug of aggression" because of its very strong and long-lasting effects on the central nervous system. The sedative influence of flunitrazepam drug increases with alcohol drinking, which causes mental and motor disorders and causes the victim to become silent. Due to its criminals use, its accurate measurement is crucial. In this work, a novel electrochemical sensor based on TiO2@CuO-N doped rGO, TiO2@CuO-N-rGO, nano-composite and poly (L-cysteine), poly (L-Cys), is presented for trace analysis of flunitrazepam in aqueous solution. At first, TiO2@CuO-N-rGO nano-composite was synthesized by the sol-gel method and characterized by Raman spectroscopy, Fourier transform infrared, field emission scanning electron microscope, and X-ray diffraction analysis. Then, the suspension of the TiO2@CuO-N-rGO nano-composite was drop casted on the surface of the glassy carbon electrode (GCE/TiO2@CuO-N-rGO). After that, electro-polymerization of l-cysteine on the GCE/TiO2@CuO-N-rGO surface was performed by cyclic voltammetry (CV) method. The electrochemical characteristics of the GCE/TiO2@CuO-N-rGO/poly (L-Cys) surface were evaluated in the solution of ferri/ferrocyanide by electrochemical impedance spectroscopy (EIS) and CV techniques. The increase in current, change in oxidation peak potential, and the appearance of two reduction peaks indicated higher electron transfer rate with well-performed electrochemical process of flunitrazepam at the modified electrode surface compared to the bare GCE. These improvements originate from the synergistic effect of TiO2@CuO-N-rGO nano-composite and poly (L-Cys). Finally, a linear relationship was resulted between the oxidation peak current and the concentration of flunitrazepam in the wide concentration range of 1 nM to 50 µM with a detection limit of 0.3 nM.

Functionalization of 3D Chitinous Skeletal Scaffolds of Sponge Origin Using Silver Nanoparticles and Their Antibacterial Properties.

Chitin, as one of nature's most abundant structural polysaccharides, possesses worldwide, high industrial potential and a functionality that is topically pertinent. Nowadays, the metallization of naturally predesigned, 3D chitinous scaffolds originating from marine sponges is drawing focused attention. These invertebrates represent a unique, renewable source of specialized chitin due to their ability to grow under marine farming conditions. In this study, the development of composite material in the form of 3D chitin-based skeletal scaffolds covered with silver nanoparticles (AgNPs) and Ag-bromide is described for the first time. Additionally, the antibacterial properties of the obtained materials and their possible applications as a water filtration system are also investigated.

Evaluation radioprotective effect of curcumin conjugated albumin nanoparticles.

In this research, curcumin (CUR) conjugated albumin based nanoparticles (BSA-CUR) were designed for improvement and evaluation radioprotective effect of CUR. In this way, we have prepared BSA-CUR by covalently binding the CUR with BSA. Next, this synthesized prodrug was evaluated for physical and chemical properties by Fourier-transform infrared (FTIR), Dynamic light scattering (DLS), Transmission electron microscopy (TEM), Ultraviolet-visible (UV/Vis), and Differential scanning calorimetry (DSC) analysis. Furthermore, the chemical stability of designed prodrug was appraised. The result shows that the size of nanoparticles is 174.4 nm with a polydispersity index (PdI) of 0.191. The nanoparticles have a high loading capacity and show sustained release behavior. Loading of CUR to BSA not only could increase the chemical stability of CUR, but also could improve radioprotection efficacy of it's against X-Ray irradiation. The HHF-2 cells show 107% viability in the presence of BSA-CUR at a concentration of 50 µg/mL, whereas non-treated cells show 46% viability, under X-Ray irradiation. Also in vivo study results show that, four out of five mice have died when the mice irradiated by X-Ray and no received any treatment. Although, for a group that treated with BSA-CUR and also irradiated by X-Ray, median survival and survival rate was higher than CUR treated and control mice, and only two out of five mice have died. The result of this study proved that BSA-CUR can be used as a proficient vehicle for improving the potential radioprotective effect of CUR.