Comparative Study on the Oxidative Stability of Encapsulated Fish Oil by Monoaxial or Coaxial Electrospraying and Spray-Drying.

The impact of the encapsulation technology on the oxidative stability of fish-oil-loaded capsules was investigated. The capsules (ca. 13 wt% oil load) were produced via monoaxial or coaxial electrospraying and spray-drying using low molecular weight carbohydrates as encapsulating agents (e.g., glucose syrup or maltodextrin). The use of spray-drying technology resulted in larger capsules with higher encapsulation efficiency (EE > 84%), whilst the use of electrospraying produced encapsulates in the sub-micron scale with poorer retention properties (EE < 72%). The coaxially electrosprayed capsules had the lowest EE values (EE = 53-59%), resulting in the lowest oxidative stability, although the lipid oxidation was significantly reduced by increasing the content of pullulan in the shell solution. The emulsion-based encapsulates (spray-dried and monoaxially electrosprayed capsules) presented high oxidative stability during storage, as confirmed by the low concentration of selected volatiles (e.g., (E,E)-2,4-heptadienal). Nonetheless, the monoaxially electrosprayed capsules were the most oxidized after production due to the emulsification process and the longer processing time.

Influence of emulsifier type and encapsulating agent on the in vitro digestion of fish oil-loaded microcapsules produced by spray-drying.

The influence of the emulsifier type and the encapsulating agent on the bioaccessibility of microencapsulated fish oil was investigated. Fish oil-loaded microcapsules were produced by spray-drying using carbohydrate-based encapsulating agents (glucose syrup or maltodextrin). Whey protein concentrate hydrolysate (WPCH) or Tween 20 (TW20) were used as the emulsifiers. The microcapsules were subjected to a three-phase in vitro digestion (oral, gastric, and intestinal phase) and the changes in the physicochemical properties of the samples were monitored throughout the simulated gastrointestinal tract (oil droplet size, ζ-potential, and microstructure). The lipolysis rate and extent were evaluated at the intestinal digestion phase. Contrary to the encapsulating agent, the emulsifier used in the infeed emulsion formulation significantly influenced lipid digestion. WPCH-based interfacial layer prevented oil droplets coalescence during and after processing more efficiently than TW20, which resulted in an increased specific surface area for lipases to adsorb and thus a higher bioaccessibility of the microencapsulated oil.

Structure of whey protein hydrolysate used as emulsifier in wet and dried oil delivery systems: Effect of pH and drying processing.

The secondary structure of whey protein concentrate hydrolysate (WPCH), used as an emulsifier in oil delivery systems, was investigated using Synchrotron Radiation Circular Dichroism (SRCD). The effect of pH on the conformation of peptides in solution and adsorbed at the oil/water interface, as well as the thermal stability of the systems was studied. Furthermore, oil-loaded microcapsules were produced by spray-drying or electrospraying to investigate the influence of encapsulating agents (glucose syrup, maltodextrin) and drying technique on the secondary structure of WPCH at the oil/water interface. Enzymatic hydrolysis resulted in peptides with a highly unordered structure (∼60% turns and unordered regions) in solution. However, WPCH adsorption onto the oil/water interface increased the α-helical content resulting in an improved thermal stability. The encapsulating agents and spray-drying process did not modify the conformation of WPCH at the oil/water interface. Nonetheless, electrospraying affected the SRCD spectra obtained for WPCH adsorbed at the oil/water interface.

Development of Fish Oil-Loaded Microcapsules Containing Whey Protein Hydrolysate as Film-Forming Material for Fortification of Low-Fat Mayonnaise.

The influence of the carbohydrate-based wall matrix (glucose syrup, GS, and maltodextrin, MD21) and the storage temperature (4 °C or 25 °C) on the oxidative stability of microencapsulated fish oil was studied. The microcapsules (ca. 13 wt% oil load) were produced by spray-drying emulsions stabilized with whey protein hydrolysate (WPH), achieving high encapsulation efficiencies (>97%). Both encapsulating materials showed an increase in the oxidation rate with the storage temperature. The GS-based microcapsules presented the highest oxidative stability regardless of the storage temperature with a peroxide value (PV) of 3.49 ± 0.25 meq O2/kg oil and a content of 1-penten-3-ol of 48.06 ± 9.57 ng/g oil after six weeks of storage at 4 °C. Moreover, low-fat mayonnaise enriched with GS-based microcapsules loaded with fish oil and containing WPH as a film-forming material (M-GS) presented higher oxidative stability after one month of storage when compared to low-fat mayonnaise enriched with either a 5 wt% fish oil-in-water emulsion stabilized with WPH or neat fish oil. This was attributed to a higher protective effect of the carbohydrate wall once the microcapsules were incorporated into the mayonnaise matrix.