Use of Thermoregulatory Models to Evaluate Heat Stress in Industrial Environments.

Heat stress in many industrial workplaces imposes significant risk of injury to individuals. As a means of quantifying these risks, a comparison of four rationally developed thermoregulatory models was conducted. The health-risk prediction (HRP) model, the human thermal regulation model (HuTheReg), the SCENARIO model, and the six-cylinder thermoregulatory model (SCTM) each used the same inputs for an individual, clothing, activity rates, and environment based on previously observed conditions within the Portuguese glass industry. An analysis of model correlations was conducted for predicted temperatures (°C) of brain (TBrain), skin (TSkin), core body (TCore), as well as sweat evaporation rate (ER; Watts). Close agreement was observed between each model (0.81-0.98). Predicted mean ± SD of active phases of exposure for both moderate (TBrain 37.8 ± 0.25, TSkin 36.7 ± 0.49, TCore 37.8 ± 0.45 °C, and ER 207.7 ± 60.4 W) and extreme heat (TBrain 39.1 ± 0.58, TSkin, 38.6 ± 0.71, TCore 38.7 ± 0.65 °C, and ER 468.2 ± 80.2 W) were assessed. This analysis quantifies these heat-risk conditions and provides a platform for comparison of methods to more fully predict heat stress during exposures to hot environments.

Globe Temperature and Its Measurement: Requirements and Limitations.

This study addresses the measurement of the globe temperature. For this purpose, two globe thermometers with different diameters (50 and 150 mm) and a variety of thermal environmental conditions were considered. The assessments of the response times and of the influences of the globe diameter and the air velocity on the measured globe temperatures are discussed. The results of the response times clearly put in evidence that the values usually stated in the literature can be questioned and that longer measurement periods must be considered. In fact, response times >30 min were obtained in 68% of the tests performed. Moreover, differences >20ºC were obtained between the 150 and 50 mm sensors, highlighting the influence of the globe diameter. The analysis of the effect of the air velocity on the globe temperature shows mean relative differences >30% between tests in still air and with the higher air velocity considered (1.81 m s-1). On the basis of measurements carried out with the 50 mm globe, correction equations to the standard globe temperature for both natural and forced convection are proposed.

Replacement costs of cold storage equipment for medical products of public healthcare establishments of European Union countries.

This study presents a quantification of the financial needs to maintain the stock of cold equipment for the preservation of medical products in public health care establishments of European Union (EU) countries. The conditions that must be guaranteed, the types of equipment used, the installed capacity, the total annual financial needs and the estimate of its evolution in the near future are addressed. A field survey involving Portuguese establishments of various types and dimensions was performed in order to assess the currently installed volume by type of equipment. Through an analysis based on possible scenarios and using a methodology considered adequate, the financial needs to maintain such equipment in operation was estimated for Portugal, for each EU country and for the EU as a whole. The economic value of these amounts in 2017 and following years was obtained assuming the average price of each type of equipment and considering an expected evolution of its value.

Assessment of thermal environments: working conditions in the portuguese glass industry.

The objective of the present contribution is to assess the exposure to hot thermal environments in the Portuguese glass industry. For this purpose a field survey was carried out and the measurements took place in industrial units - five industries and nineteen workplaces were considered-so all the results are based on real working conditions. In order to assess the level of heat exposure the Wet Bulb Globe Temperature (WBGT) index and the Predicted Heat Strain (PHS) model, defined in ISO Standards 7243 (1989) and 7933 (2004), respectively, were used. According to the WBGT index, the results show that almost 80% of the workplaces under analysis are prone to heat stress conditions. If the PHS model is considered, the results highlight that the predicted and the maximum sweat rates present equal values in about 40% of the workplaces. In addition, in almost 25% of the workplaces the estimated rectal temperature was higher than 38°C, just for an exposure period of one hour. Thus, the present study brings to light the characteristics of the glass industry in terms of the occupational exposure to hot environments and places this activity sector as one of the most difficult to deal with.

Assessment of thermal environments: Working conditions in the Portuguese ceramic industry in 1994 and 2012.

BACKGROUND: The assessment of heat stress in the ceramic industry is a matter of great concern for safety and health of workers. For this purpose working conditions in the last two decades are analysed. OBJECTIVE: To study occupational hot thermal environments in the Portuguese ceramic activity sector in 8 industrial units and 21 workplaces. METHODS: In order to characterise the level of heat exposure, the method proposed by ISO 7243 (1989) based on the Wet-Bulb Globe Temperature (WBGT) index was adopted. RESULTS: Two field surveys, one carried out in 1994 and the other in 2012 are considered. The WBGT mean values varied between 23.7 and 37.8°C in the 1994 survey while in 2012 those values ranged from 21.5 to 30.5°C. In the 1994 evaluations 5 out of 8 (62.5%) of the workplaces present heat stress conditions whereas in the 2012 assessments the corresponding value is 46.2% (6 out of 13 workplaces). CONCLUSIONS: Despite two decades between the two surveys, the results highlight that the overall thermal conditions of the workplaces in the ceramic sector are still quite similar, suggesting that the working conditions have not changed enough, a conclusion that asks for further analysis and improvements.

Evaluation of occupational cold environments: field measurements and subjective analysis.

The present work is dedicated to the study of occupational cold environments in food distribution industrial units. Field measurements and a subjective assessment based on an individual questionnaire were considered. The survey was carried out in 5 Portuguese companies. The field measurements include 26 workplaces, while a sample of 160 responses was considered for the subjective assessment. In order to characterize the level of cold exposure, the Required Clothing Insulation Index (IREQ) was adopted. The IREQ index highlights that in the majority of the workplaces the clothing ensembles worn are inadequate, namely in the freezing chambers where the protection provided by clothing is always insufficient. The questionnaires results show that the food distribution sector is characterized by a female population (70.6%), by a young work force (60.7% are less than 35 yr old) and by a population with a medium-length professional career (80.1% in this occupation for less than 10 yr). The incidence of health effects which is higher among women, the distribution of protective clothing (50.0% of the workers indicate one garment) and the significant percentage of workers (>75%) that has more difficulties in performing the activity during the winter represent other important results of the present study.