Microalgal Biorefinery Concepts' Developments for Biofuel and Bioproducts: Current Perspective and Bottlenecks.

Microalgae have received much interest as a biofuel feedstock. However, the economic feasibility of biofuel production from microalgae does not satisfy capital investors. Apart from the biofuels, it is necessary to produce high-value co-products from microalgae fraction to satisfy the economic aspects of microalgae biorefinery. In addition, microalgae-based wastewater treatment is considered as an alternative for the conventional wastewater treatment in terms of energy consumption, which is suitable for microalgae biorefinery approaches. The energy consumption of a microalgae wastewater treatment system (0.2 kW/h/m3) was reduced 10 times when compared to the conventional wastewater treatment system (to 2 kW/h/m3). Microalgae are rich in various biomolecules such as carbohydrates, proteins, lipids, pigments, vitamins, and antioxidants; all these valuable products can be utilized by nutritional, pharmaceutical, and cosmetic industries. There are several bottlenecks associated with microalgae biorefinery. Hence, it is essential to promote the sustainability of microalgal biorefinery with innovative ideas to produce biofuel with high-value products. This review attempted to bring out the trends and promising solutions to realize microalgal production of multiple products at an industrial scale. New perspectives and current challenges are discussed for the development of algal biorefinery concepts.

A novel visible light active rare earth doped CdS nanoparticles decorated reduced graphene oxide sheets for the degradation of cationic dye from wastewater.

A variety of rare earth metals (La, Sm, Nd, Ce, Gd) doped cadmium sulfide (RE-CdS) grafted reduced graphene oxide (G) sheet nanocomposites estimated imperative attention due to their visible light-driven, tunable band gap and high surface to volume ratio were investigated for the photocatalytic degradation of cationic dye from aqueous solution. The formation of wurtzite (hexagonal) crystal structures of cadmium sulfide nanoparticles (NPs) was confirmed by Powder X-ray diffraction spectra and the average crystallite size was determined to be 10 ± 2 nm. HRTEM analysis confirmed the homogeneous distribution of RE-CdS NPs over the G sheets. The photocatalytic behaviour of the RE-CdS decorated G sheets was studied using a textile dye methylene blue (MB) under sunlight. The result indicates that among the various RE-CdS nanocomposites studied, Cerium-cadmium sulfide-reduced graphene oxide (Ce-CdS-G) shows highest MB degradation of 99.0 ± 0.4% within 90 min under sunlight. The result confirms that RE-CdS-G nanocatalyst efficiently accelerates the separation and slows down the recombination rate in photo excited charge carriers. The catalytic activity was retained over 80% of its original value even after four successive runs and the present method can be employed for the large-scale synthesis of RE-CdS-G nanocatalyst.

Microalgal feedstock for the production of omega-3 fatty acid ethyl esters and ɛ-polylysine.

Microalgal omega-3 fatty acids are considered as an efficient alternative for fish-based omega-3 fatty acids. Ethyl esters derived from omega-3 fatty acids are being considered as the drug for hypertriglyceridemia. In this study, omega-3 fatty acids rich Chlorella sp. was utilized for the transesterification for the ethyl ester production using a potassium carbonate alkaline catalyst. At the optimized conditions of transesterification, 86.2% ethyl ester yield was achieved with solvent to algae ratio (20 mL/g), water addition (45 %), catalyst (4 %), temperature (75°C), and reaction time (60 min). Additionally, the acid-hydrolysed spent biomass was used for the production of ɛ-polylysine by fermentation using Streptomyces sp. as fermentative organism. The maximum yield of 1.78 g/L was achieved after 90 h fermentation. This study established a biorefinery approach where two highly valuable compounds could be produced from the Chlorella sp. by transesterification followed by fermentation.

Polyhydroxybutyrate production from ultrasound-aided alkaline pretreated finger millet straw using Bacillus megaterium strain CAM12.

In this study, finger millet straw (FMS) was utilized for the production of Polyhydroxybutyrate (PHB) by Bacillus megaterium strain CAM12. Ultrasound-assisted alkaline (NaOH) pretreatment of FMS under optimized conditions followed by enzymatic saccharification resulted in the maximum delignification (72%), hydrolysis yield (84%), glucose yield (86%) and xylose yield (61%). The effects of different pH, temperature, incubation period, inoculum concentration, agitation speed and FMS enzymatic hydrolysates concentration were investigated to improve the PHB production. Under optimized conditions, strain CAM12 used the FMS hydrolysates as the sole carbon source for their growth and produced 8.31 g L-1 of PHB. The extracted polymer on Fourier transform infrared (FTIR), X-ray diffraction (XRD) and Nuclear magnetic resonance (NMR) analyses were confirmed to be PHB. These results suggest the potential of combined ultrasound and alkaline pretreated FMS hydrolysates as a promising feedstock for PHB production.

Mesoporous ferromagnetic manganese ferrite nanoparticles for enhanced visible light mineralization of azoic dye into nontoxic by-products.

In this study, a one pot facile synthesis of ferromagnetic manganese ferrite nanoparticles (MnFe2O4) was carried out using chemical co-precipitation method for mineralization of azo dye (Congo red (CR)) in aqueous solution under visible light irradiation. The synthesized MnFe2O4 nanoparticles were highly crystalline and showed face-centred cubic (FCC) structure with average particle size of 58 ± 4 nm. The BET analysis of the MnFe2O4 nanoparticles revealed the mesoporous distribution of material with high surface area can provide large electro active sites and short diffusion paths for the transport of ions which plays a vital role in the photocatalytic degradation of CR. The point of zero charge (pHPZC) was observed to be 6.7 indicating favourable condition for material-anionic dye interaction. The XPS studies revealed that the large amounts of oxygen vacancies were produced due to the defects in the lattice oxygen. The MnFe2O4 nanoparticles mineralised 98.3 ± 0.2% of 50 mg/L CR within 30 min when tested in photocatalytic reactor under 565 nm. The particles were recoverable under the influence of an external magnet after the photocatalytic reaction and were reusable. The recovered nanoparticles showed 96% of CR degradation efficiency even after five cycles of reuse. The by-product analysis with GC-MS indicated mineralization of CR into simple alcohols and acids. The aqueous solution containing mineralised CR was nontoxic to Trigonella foenumgraecum and Vigna mungo seeds and favoured increased germination, plumule and radicle length when compared to untreated CR.

High potential of Rhizopus treated rice bran waste for the nutrient-free anaerobic fermentative biohydrogen production.

In this study, Rhizopus oligosporus MTCC 556 (Rhizopus) treated rice bran was utilized for the anaerobic bacterial fermentative hydrogen production. The Enterobacter aerogenes MTCC 2822 with nutrients addition fermented the treated rice bran to give hydrogen yield of 5.4 mmol H2/g of biomass. A closely similar hydrogen yield of 4.6 mmol H2/g of biomass was obtained from the treated rice bran under the condition without nutrients addition, suggesting the potential of the fungus treatment to produce hydrogen from nutrient-free fermentation. The pretreated rice bran showed efficient hydrogen production upon anaerobic fermentation without nutrients addition. The Rhizopus pretreated biomass can provide required nutrients for the enhancement of hydrogen yield by anaerobic fermentation. The Rhizopus pretreatment of rice bran enhanced the hydrogen production under nutrient-free conditions which reduced the overall production cost. The findings provide a promising solution to efficiently utilize the rice bran waste for low cost hydrogen production.

A scientometric analysis of literature published in Indian Journal of Ophthalmology from 2005 to 2017.

Purpose: To perform an analysis of ophthalmic literature published by the Indian journal of ophthalmology (IJO) between 2005 and 2017 using scientometric techniques. Methods: The bibliographic records of all the literature published in the study period were collected from PubMed and exported as XML into Microsoft access for scientometric analysis. Subspecialty wise distribution across time, type of articles published (original articles, case reports, review articles, editorials, and letter to editor), reference analysis, author productivity analysis and citation analysis were performed as per well-established scientometric methodology. Results: A total of 2,633 papers were published in the IJO during the study period. Articles related to vitreoretinal diseases contributed 23% of all the articles published (n = 598) followed by corneal diseases (n = 313, 12%), and cataract (n = 293, 11%). There were equal numbers of case reports (n = 894, 34%) and original articles (n = 862, 33%) though case reports reduced over time. A total of 5490 unique authors from 64 countries published in the IJO with majority authors (63%) from India. Less than 80% of articles published in the IJO were cited (n = 2051, 78%) by 24,592 articles with retina-related papers contributing 20% of all citations. Original articles had three times more likelihood of being cited compared to case reports. Conclusion: The: IJO showed a steady increase in the number of publications from year to year. Papers from the vitreoretinal domain were the commonest and were cited most often. Original articles and case reports contributed equally to the published content though the former were cited much more frequently than the latter.

One pot facile green synthesis of crystalline bio-ZrO2 nanoparticles using Acinetobacter sp. KCSI1 under room temperature.

In this study, crystalline ZrO2 nanoparticles were synthesized in one pot at room temperature using an extremophilic Acinetobacter sp. KCSI1 and characterized using various techniques to study its structural, optical and crystalline properties. The average size of the ZrO2 nanoparticles was found to be 44 ±â€¯7 nm. The XRD and Raman spectra showed the crystalline structure of ZrO2. HRTEM and SAED images showed well aligned ordered crystal lattice nanoparticles. The zeta potential of Bio-NP of ZrO2 has been found to be 36.5 ±â€¯5.46 mV. The mechanical behaviour such as hardness and Young's modulus of Bio-ZrO2 NPs were determined using atomic force microscopy (AFM) and found to be 9.206 ±â€¯2.22 and 0.285 ±â€¯0.13 GPa, respectively. No significant cytotoxicity for ZrO2 nanoparticles was observed when tested with mouse fibroblast cells (L929), suggesting that the synthesized ZrO2 nanoparticle is biocompatible and safe for environmental applications.

Challenges and complexities in remediation of uranium contaminated soils: A review.

Uranium contamination of soil has been a major concern with respect to its toxicity, accumulation in the food chain and persistence in the environment. Owing to these problems, remediation of uranium-contaminated soils has been investigated by various techniques. This review focuses on the challenges and complexities associated with the remediation of uranium-contaminated soil at field level. Therefore, laboratory studies have been excluded from this review. Challenges faced during remediation of uranium-contaminated soil using various techniques such as microbial/phyto/chemical/material based strategies have been discussed with suitable examples. Various factors that have a major influence on uranium decontamination process in soil such as soil type, uranium speciation, the presence of coexisting ions and organics, etc., have been highlighted. This review brings out the significance of the integrated role of various factors which determine the efficiency of the uranium decontamination process.

Stimulation of human osteoblast cells (MG63) proliferation using decanoic acid and isopropyl amine fractions of Wattakaka volubilis leaves.

OBJECTIVES: This study was carried out to investigate the impact of various isolated phytochemical components present in the Wattakaka volubilis leaves for the growth and proliferation of human osteoblast like cells (MG63). KEY FINDINGS: Ethyl acetate was found to be the best solvent for potential extraction of phytocompounds. Further, the MTT assay was carried out to deduce the viability of 44 isolated phytochemicals. Ten phytochemical fractions found to increase the cell growth were subjected to statistical tool namely Plackett-Burman and Central composite design to screen the optimum phytochemical fraction and its dosage. The active phytochemical constituents were analysed and identified as hexadeconoic acid, octadeconoic acid, N,N-diisopropyl(2,2,3,3,3-pentafluoropropyl)amine using GC-MS and HPLC techniques. The impact of optimized concentration was assessed on osteoblast cells. The maximum % cell viability, % DNA and collagen content were found to be 164.44, 159.32 and 3.81, respectively. CONCLUSIONS: The results confirmed that the optimized fraction containing decanoic acid and isopropyl amine at particular concentration stimulated the proliferation of human osteoblast (MG63) cells. Hence, the optimized concentration of this compound from W. volubilis may used for treatment of bone related injuries externally.

Fine cutting edge shaped Bi2O3rods/reduced graphene oxide (RGO) composite for supercapacitor and visible-light photocatalytic applications.

Bi2O3 rods/RGO composite has been synthesized by a simple precipitation and calcination method. The crystallnity, structural, and morphological features were studied by X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), and high resolution transmission electron microscopy (HR-TEM) techniques. The supercapacitor behavior was studied using cyclic voltammetry, galvanostatic charge discharge and impedance analysis, respectively. The Bi2O3 rods/RGO nanocomposite exhibits a maximum specific capacitance of 1041Fg-1 at a current density of 2Ag-1. The photocatalytic activity of Bi2O3 rods/RGO composite was evaluated by photocatalytic degradation of methylene blue (MB) dye under visible-light irradiation. The enhancement of photocatalytic properties of Bi2O3 rods/RGO composite attributed to the synergistic effect between Bi2O3 rods and graphene sheets which effectively prevents recombination of the photogenerated electron-hole pairs in Bi2O3 rods. The present study provides a new approach in improving the performance of Bi2O3 rods/RGO composite in energy and environmental applications.

Mechanistic study on ultrasound assisted pretreatment of sugarcane bagasse using metal salt with hydrogen peroxide for bioethanol production.

This study presents the ultrasound assisted pretreatment of sugarcane bagasse (SCB) using metal salt with hydrogen peroxide for bioethanol production. Among the different metal salts used, maximum holocellulose recovery and delignification were achieved with ultrasound assisted titanium dioxide (TiO2) pretreatment (UATP) system. At optimum conditions (1% H2O2, 4 g SCB dosage, 60 min sonication time, 2:100 M ratio of metal salt and H2O2, 75°C, 50% ultrasound amplitude and 70% ultrasound duty cycle), 94.98 ± 1.11% holocellulose recovery and 78.72 ± 0.86% delignification were observed. The pretreated SCB was subjected to dilute acid hydrolysis using 0.25% H2SO4 and maximum xylose, glucose and arabinose concentration obtained were 10.94 ± 0.35 g/L, 14.86 ± 0.12 g/L and 2.52 ± 0.27 g/L, respectively. The inhibitors production was found to be very less (0.93 ± 0.11 g/L furfural and 0.76 ± 0.62 g/L acetic acid) and the maximum theoretical yield of glucose and hemicellulose conversion attained were 85.8% and 77%, respectively. The fermentation was carried out using Saccharomyces cerevisiae and at the end of 72 h, 0.468 g bioethanol/g holocellulose was achieved. Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis of pretreated SCB was made and its morphology was studied using scanning electron microscopy (SEM). The compounds formed during the pretreatment were identified using gas chromatography-mass spectrometry (GC-MS) analysis.