Generation of induced pluripotent stem cells (UCLi024-A) from a patient with argininosuccinate lyase deficiency carrying a homozygous c.437G > A (p.Arg146Gln) mutation.

Argininosuccinic aciduria (ASA) is a rare inherited metabolic disease caused by argininosuccinate lyase (ASL) deficiency. Patients with ASA present with hyperammonaemia due to an impaired urea cycle pathway in the liver, and systemic disease with epileptic encephalopathy, chronic liver disease, and arterial hypertension. A human induced pluripotent stem cell (iPSC) line from the fibroblasts of a patient with ASA with homozygous pathogenic c.437G > A mutation of hASL was generated. Characterization of the cell line demonstrated pluripotency, differentiation potential and normal karyotype. This cell line, called UCLi024-A, can be utilized for in vitro disease modelling of ASA, and design of novel therapeutics.

New Developments and Challenges in Liver Transplantation.

Liver disease is increasing in incidence and is the third most common cause of premature death in the United Kingdom and fourth in the United States. Liver disease accounts for 2 million deaths globally each year. Three-quarters of patients with liver disease are diagnosed at a late stage, with liver transplantation as the only definitive treatment. Thomas E. Starzl performed the first human liver transplant 60 years ago. It has since become an established treatment for end-stage liver disease, both acute and chronic, including metabolic diseases and primary and, at present piloting, secondary liver cancer. Advances in surgical and anaesthetic techniques, refined indications and contra-indications to transplantation, improved donor selection, immunosuppression and prognostic scoring have allowed the outcomes of liver transplantation to improve year on year. However, there are many limitations to liver transplantation. This review describes the milestones that have occurred in the development of liver transplantation, the current limitations and the ongoing research aimed at overcoming these challenges.

Ultrasound Histotripsy on a Viable Perfused Whole Porcine Liver: Histological Aspects, Including 3D Reconstruction of the Histotripsy Site.

Non-invasive therapeutic-focused ultrasound (US) can be used for the mechanical dissociation of tissue and is described as histotripsy. We have performed US histotripsy in viable perfused ex vivo porcine livers as a step in the development of a novel approach to hepatocyte cell transplantation. The histotripsy nidus was created with a 2 MHz single-element focused US transducer, producing 50 pulses of 10 ms duration, with peak positive and negative pressure values of P+ = 77.7 MPa and P- = -13.7 MPaat focus, respectively, and a duty cycle of 1%. Here, we present the histological analysis, including 3D reconstruction of histotripsy sites. Five whole porcine livers were retrieved fresh from the abattoir using human transplant retrieval and cold static preservation techniques and were then perfused using an organ preservation circuit. Whilst under perfusion, histotripsy was performed to randomly selected sites on the live. Fifteen lesional sites were formalin-fixed and paraffin-embedded. Sections were stained with Haematoxylin and Eosin and picro-Sirius red, and they were also stained for reticulin. Additionally, two lesion sites were used for 3D reconstruction. The core of the typical lesion consisted of eosinophilic material associated with reticulin loss, collagen damage including loss of birefringence to fibrous septa, and perilesional portal tracts, including large portal vein branches, but intact peri-lesional hepatic plates. The 3D reconstruction of two histotripsy sites was successful and confirmed the feasibility of this approach to investigate the effects of histotripsy on tissue in detail.

Liver Ultrasound Histotripsy: Novel Analysis of the Histotripsy Site Cell Constituents with Implications for Histotripsy Application in Cell Transplantation and Cancer Therapy.

Introduction: Allogenic hepatocyte transplantation is an attractive alternative to whole-organ transplantation, particularly for the treatment of metabolic disorders and acute liver failure. However, the shortage of human donor organs for cell isolation, the low cell yield from decellularisation regimes, and low engraftment rates from portal administration of donor cells have restricted its clinical application. Using ultrasound histotripsy to provide a nidus in the liver for direct cell transplantation offers a new approach to overcoming key limitations in current cell therapy. We have analysed the liver cavity constituents to assess their potential as a site for cell delivery and implantation. Methods: Using human organ retrieval techniques, pig livers were collected from the abattoir and transported in ice-cold storage to the laboratory. Following 2 h of cold storage, the livers were flushed with organ preservation solution and placed on an organ perfusion circuit to maintain viability. Organs were perfused with Soltran™ organ preservation solution via the portal vein at a temperature of 24-30 °C. The perfusion circuit was oxygenated through equilibration with room air. Perfused livers (n=5) were subjected to ultrasound histotripsy, producing a total of 130 lesions. Lesions were generated by applying 50 pulses at 1 Hz pulse repetition frequency and 1% duty cycle using a single element 2 MHz bowl-shaped transducer (Sonic Concepts, H-148). Following histotripsy, a focal liver lesion was produced, which had a liquid centre. The fluid from each lesion was aspirated and cultured in medium (RPMI) at 37 °C in an incubator. Cell cultures were analysed at 1 and 7 days for cell viability and a live-dead assay was performed. The histotripsy sites were excised following aspiration and H&E staining was used to characterise the liver lesions. Cell morphology was determined by histology. Results: Histotripsy created a subcapsular lesion (~5 mm below the liver capsule; size ranging from 3 to 5 mm), which contained a suspension of cells. On average, 61×104 cells per mL were isolated. Hepatocytes were present in the aspirate, were viable at 24 h post isolation and remained viable in culture for up to 1 week, as determined by phalloidin/DAPI cell viability stains. Cultures up to 21 days revealed metabolically active live hepatocyte. Live-dead assays confirmed hepatocyte viability at 1 week (Day 1: 12% to Day 7: 45% live cells; p < 0.0001), which retained metabolic activity and morphology, confirmed on assay and microscopy. Cell Titre-GloTM showed a peak metabolic activity at 1 week (average luminescence 24.6 RLU; p < 0.0001) post-culture compared with the control (culture medium alone), reduced to 1/3 of peak level (7.85 RLU) by day 21. Conclusions: Histotripsy of the liver allows isolation and culture of hepatocytes with a high rate of viability after 1 week in culture. Reproducing these findings using human livers may lead to wide clinical applications in cell therapy.

Nuclear factor programming improves stem-cell-derived hepatocyte phenotype.

In this issue of Cell Stem Cell, Ma et al. demonstrate that the activation of the nuclear receptor thyroid hormone receptor beta (NR1A2) improves the differentiation status of hepatocyte-like cells derived from human pluripotent stem cells.

Generation of 3D retinal tissue from human pluripotent stem cells using a directed small molecule-based serum-free microwell platform.

Retinal degenerative diseases are a leading cause of blindness worldwide with debilitating life-long consequences for the affected individuals. Cell therapy is considered a potential future clinical intervention to restore and preserve sight by replacing lost photoreceptors and/or retinal pigment epithelium. Development of protocols to generate retinal tissue from human pluripotent stem cells (hPSC), reliably and at scale, can provide a platform to generate photoreceptors for cell therapy and to model retinal disease in vitro. Here, we describe an improved differentiation platform to generate retinal organoids from hPSC at scale and free from time-consuming manual microdissection steps. The scale up was achieved using an agarose mould platform enabling generation of uniform self-assembled 3D spheres from dissociated hPSC in microwells. Subsequent retinal differentiation was efficiently achieved via a stepwise differentiation protocol using a number of small molecules. To facilitate clinical translation, xeno-free approaches were developed by substituting Matrigel™ and foetal bovine serum with recombinant laminin and human platelet lysate, respectively. Generated retinal organoids exhibited important features reminiscent of retinal tissue including correct site-specific localisation of proteins involved in phototransduction.

Serum-Free Production of Three-Dimensional Hepatospheres from Pluripotent Stem Cells.

Developing renewable human liver tissue from stem cells has been pursued as a potential source of biological material for pharmaceutical and clinical endeavors. At present, two-dimensional differentiation procedures deliver tissue lacking long-term phenotypic and functional stability. Efforts to overcome these limiting factors have led to the development of protocols to generate three-dimensional cellular aggregates. Here we describe a methodology to generate 3D hepatospheres from human pluripotent stem cells using defined and commercially available reagents.

Serum Free Production of Three-dimensional Human Hepatospheres from Pluripotent Stem Cells.

The development of renewable sources of liver tissue is required to improve cell-based modelling, and develop human tissue for transplantation. Human embryonic stem cells (hESCs) and human induced pluripotent stem cells (hiPSCs) represent promising sources of human liver spheres. We have developed a serum free and defined method of cellular differentiation to generate three-dimensional human liver spheres formed from human pluripotent stem cells. A potential limitation of the technology is the production of dense spheres with dead material inside. In order to circumvent this, we have employed agarose microwell technology at defined cell densities to control the size of the 3D spheres, preventing the generation of apoptotic and/or necrotic cores.  Notably, the spheres generated by our approach display liver function and stable phenotype, representing a valuable resource for basic and applied scientific research. We believe that our approach could be used as a platform technology to develop further tissues to model and treat human disease and in the future may permit the generation of human tissue with complex tissue architecture.

3D human liver tissue from pluripotent stem cells displays stable phenotype in vitro and supports compromised liver function in vivo.

Liver disease is an escalating global health issue. While liver transplantation is an effective mode of therapy, patient mortality has increased due to the shortage of donor organs. Developing renewable sources of human liver tissue is therefore attractive. Pluripotent stem cell-derived liver tissue represents a potential alternative to cadaver derived hepatocytes and whole organ transplant. At present, two-dimensional differentiation procedures deliver tissue lacking certain functions and long-term stability. Efforts to overcome these limiting factors have led to the building of three-dimensional (3D) cellular aggregates. Although enabling for the field, their widespread application is limited due to their reliance on variable biological components. Our studies focused on the development of 3D liver tissue under defined conditions. In vitro generated 3D tissues exhibited stable phenotype for over 1 year in culture, providing an attractive resource for long-term in vitro studies. Moreover, 3D derived tissue provided critical liver support in two animal models, including immunocompetent recipients. Therefore, we believe that our study provides stable human tissue to better model liver biology 'in the dish', and in the future may permit the support of compromised liver function in humans.

Three-dimensional cell culture: from evolution to revolution.

Recent advances in the isolation of tissue-resident adult stem cells and the identification of inductive factors that efficiently direct differentiation of human pluripotent stem cells along specific lineages have facilitated the development of high-fidelity modelling of several tissues in vitro Many of the novel approaches have employed self-organizing three-dimensional (3D) culturing of organoids, which offer several advantages over conventional two-dimensional platforms. Organoid technologies hold great promise for modelling diseases and predicting the outcome of drug responses in vitro Here, we outline the historical background and some of the recent advances in the field of three-dimensional organoids. We also highlight some of the current limitations of these systems and discuss potential avenues to further benefit biological research using three-dimensional modelling technologies.This article is part of the theme issue 'Designer human tissue: coming to a lab near you'.

Liver cell therapy: is this the end of the beginning?

The prevalence of liver diseases is increasing globally. Orthotopic liver transplantation is widely used to treat liver disease upon organ failure. The complexity of this procedure and finite numbers of healthy organ donors have prompted research into alternative therapeutic options to treat liver disease. This includes the transplantation of liver cells to promote regeneration. While successful, the routine supply of good quality human liver cells is limited. Therefore, renewable and scalable sources of these cells are sought. Liver progenitor and pluripotent stem cells offer potential cell sources that could be used clinically. This review discusses recent approaches in liver cell transplantation and requirements to improve the process, with the ultimate goal being efficient organ regeneration. We also discuss the potential off-target effects of cell-based therapies, and the advantages and drawbacks of current pre-clinical animal models used to study organ senescence, repopulation and regeneration.

Defined and Scalable Generation of Hepatocyte-like Cells from Human Pluripotent Stem Cells.

Human pluripotent stem cells (hPSCs) possess great value for biomedical research. hPSCs can be scaled and differentiated to all cell types found in the human body. The differentiation of hPSCs to human hepatocyte-like cells (HLCs) has been extensively studied, and efficient differentiation protocols have been established. The combination of extracellular matrix and biological stimuli, including growth factors, cytokines, and small molecules, have made it possible to generate HLCs that resemble primary human hepatocytes. However, the majority of procedures still employ undefined components, giving rise to batch-to-batch variation. This serves as a significant barrier to the application of the technology. To tackle this issue, we developed a defined system for hepatocyte differentiation using human recombinant laminins as extracellular matrices in combination with a serum-free differentiation process. Highly efficient hepatocyte specification was achieved, with demonstrated improvements in both HLC function and phenotype. Importantly, this system is easy to scale up using research and GMP-grade hPSC lines promising advances in cell-based modelling and therapies.

Fluid shear stress modulation of hepatocyte-like cell function.

Freshly isolated human adult hepatocytes are considered to be the gold standard tool for in vitro studies. However, primary hepatocyte scarcity, cell cycle arrest and the rapid loss of cell phenotype limit their widespread deployment. Human embryonic stem cells and induced pluripotent stem cells provide renewable sources of hepatocyte-like cells (HLCs). Despite the use of various differentiation methodologies, HLCs like primary human hepatocytes exhibit unstable phenotype in culture. It has been shown that the functional capacity can be improved by adding back elements of human physiology, such as cell co-culture or through the use of natural and/or synthetic surfaces. In this study, the effect of fluid shear stress on HLC performance was investigated. We studied two important liver functions, cytochrome P450 drug metabolism and serum protein secretion, in static cultures and those exposed to fluid shear stress. Our study demonstrates that fluid shear stress improved Cyp1A2 activity by approximately fivefold. This was paralleled by an approximate ninefold increase in sensitivity to a drug, primarily metabolised by Cyp2D6. In addition to metabolic capacity, fluid shear stress also improved hepatocyte phenotype with an approximate fourfold reduction in the secretion of a foetal marker, alpha-fetoprotein. We believe these studies highlight the importance of introducing physiologic cues in cell-based models to improve somatic cell phenotype.

In Vivo Assessment of Bone Regeneration in Alginate/Bone ECM Hydrogels with Incorporated Skeletal Stem Cells and Single Growth Factors.

The current study has investigated the use of decellularised, demineralised bone extracellular matrix (ECM) hydrogel constructs for in vivo tissue mineralisation and bone formation. Stro-1-enriched human bone marrow stromal cells were incorporated together with select growth factors including VEGF, TGF-ß3, BMP-2, PTHrP and VitD3, to augment bone formation, and mixed with alginate for structural support. Growth factors were delivered through fast (non-osteogenic factors) and slow (osteogenic factors) release PLGA microparticles. Constructs of 5 mm length were implanted in vivo for 28 days within mice. Dense tissue assessed by micro-CT correlated with histologically assessed mineralised bone formation in all constructs. Exogenous growth factor addition did not enhance bone formation further compared to alginate/bone ECM (ALG/ECM) hydrogels alone. UV irradiation reduced bone formation through degradation of intrinsic growth factors within the bone ECM component and possibly also ECM cross-linking. BMP-2 and VitD3 rescued osteogenic induction. ALG/ECM hydrogels appeared highly osteoinductive and delivery of angiogenic or chondrogenic growth factors led to altered bone formation. All constructs demonstrated extensive host tissue invasion and vascularisation aiding integration and implant longevity. The proposed hydrogel system functioned without the need for growth factor incorporation or an exogenous inducible cell source. Optimal growth factor concentrations and spatiotemporal release profiles require further assessment, as the bone ECM component may suffer batch variability between donor materials. In summary, ALG/ECM hydrogels provide a versatile biomaterial scaffold for utilisation within regenerative medicine which may be tailored, ultimately, to form the tissue of choice through incorporation of select growth factors.

Polyurethane: Stable Cell Phenotype Requires Plasticity: Polymer Supported Directed Differentiation Reveals a Unique Gene Signature Predicting Stable Hepatocyte Performance (Adv. Healthcare Mater. 12/2015).

One major obstacle to the routine deployment of stem cell-derived cells is their instability in culture. On page 1820 David C. Hay and co-workers describe the use of a synthetic polymer surface. The image shows stem cell-derived hepatocytes replated on this polyurethane surface. Importantly the cells express Zonal Occludin (green stain) at the cell surface, which indicates that the cells display elements of polarization. The blue stain is DAPI, which demarks the nucleus.

Polymer Supported Directed Differentiation Reveals a Unique Gene Signature Predicting Stable Hepatocyte Performance.

In theory, pluripotent stem cells can give rise to all somatic cell types found in the human body. The ability to generate renewable sources of human cells has enormous potential to improve human health and wealth. One major obstacle to the routine deployment of stem cell-derived cells is their instability in culture. To tackle this issue a synthetic polymer surface is used.