Age Effects on Hypocotyl Mechanics.

Numerous studies deal with composition and molecular processes involved in primary cell wall formation and alteration in Arabidopsis. However, it still remains difficult to assess the relation between physiological properties and mechanical function at the cell wall level. The thin and fragile structure of primary cell walls and their large biological variability, partly related to structural changes during growth, make mechanical experiments challenging. Since, to the best of our knowledge, there is no reliable data in the literature about how the properties of the fully elongated zone of hypocotyls change with age. We studied in a series of experiments on two different seed batches the tensile properties the region below the growth zone of 4 to 7 day old etiolated Arabidopsis hypocotyls. Additionally, we analysed geometrical parameters, hypocotyl density and cellulose content as individual traits and their relation to tissue mechanics. No significant differences of the mechanical parameters of the non-growing region between 5-7 day old plants could be found whereas in 4 day old plants both tensile stiffness and ultimate tensile stress were significantly lower than in the older plants. Furthermore hypocotyl diameters and densities remain almost the same for 5, 6 and 7 day old seedlings. Naturally, hypocotyl lengths increase with age. The evaluation whether the choice-age or length-influences the mechanical properties showed that both are equally applicable sampling parameters. Additionally, our detailed study allows for the estimation of biological variability, connections between mechanics and hypocotyl age could be established and complement the knowledge on biochemistry and genetics affecting primary plant cell wall growth. The application of two different micromechanical devices for testing living Arabidopsis hypocotyls allows for emphasizing and discussing experimental limitations and for presenting a wide range of possibilities to address current and future questions related to plant cell wall mechanics, synthesis and growth in combination with molecular biology methodologies.

Cooperative behavior of a sacrificial bond network and elastic framework in providing self-healing capacity in mussel byssal threads.

The dissipative and self-healing properties of mussel byssal threads are critical for their function as anchoring fibers in wave-battered habitats and central to their emergence as an exciting model system for bio-inspired polymers. Much is now understood about the structure-function relationships defining this remarkable proteinaceous bio-fiber; however, the molecular mechanisms underlying the distinctive tough, viscoelastic and self-healing behavior are still unclear. Here, we investigate elastic and dissipative contributions from the primary load-bearing proteins in the distal region of byssal threads (the preCols) using X-ray diffraction (XRD) combined with in situ tensile testing. Specifically, we identified cross ß-sheet structure in the preCol flanking domains that functions as an elastic framework, providing hidden length. Dissipative behavior was associated with a strain-rate dependent phase transition of a sacrificial network stabilized by strong, reversible cross-links. Based on these findings, we posit a new model for byssal thread deformation and self-healing.

Role of Sacrificial Protein-Metal Bond Exchange in Mussel Byssal Thread Self-Healing.

Marine mussels tether to seashore surfaces with byssal threads, proteinaceous fibers that effectively dissipate energy from crashing waves. Protein-metal coordination bonds have been proposed to contribute to the characteristic mechanical and self-healing properties of byssal threads; however, very little is understood about how these cross-links function at the molecular level. In the present study, combined Raman and X-ray absorption spectroscopy (XAS) measurements were employed to confirm the presence of protein-Zn(2+) coordination bonds in the mussel byssus and to monitor transitions in the coordination structure during thread deformation and self-healing. Results indicate that Zn(2+) coordination bonds, primarily mediated via histidine, are ruptured during thread yield and reformed immediately following thread relaxation. Mechanical healing, on the other hand, is correlated with the transition toward shorter coordination bond lengths. Calculation of the healing activation energy suggests that protein-Zn bond exchange provides a primary rate-limiting step during healing.

Metal-mediated molecular self-healing in histidine-rich mussel peptides.

Mussels withstand high-energy wave impacts in rocky seashore habitats by fastening tightly to surfaces with tough and self-healing proteinaceous fibers called byssal threads. Thread mechanical behavior is believed to arise from reversibly breakable metal coordination cross-links embedded in histidine-rich protein domains (HRDs) in the principle load-bearing proteins comprising the fibrous thread core. In order to investigate HRD behavior at the molecular level, we have synthesized a histidine-rich peptide derived from mussel proteins (His5-bys) and studied its reversible adhesive self-interaction in the presence and absence of metal ions using PEG-based soft-colloidal probes (SCPs). Adhesion energies of greater than 0.3 mJ/m(2) were measured in the presence of metal ions, and the stiffness of the modified SCPs exhibited a 3-fold increase, whereas no adhesion was observed in the absence of metals. Raman spectroscopy confirmed the presence of metal-coordination via histidine residues by the peptide-supporting the role of His-metal complexes in the mechanical behavior of the byssus.

Pectin may hinder the unfolding of xyloglucan chains during cell deformation: implications of the mechanical performance of Arabidopsis hypocotyls with pectin alterations.

Plant cell walls, like a multitude of other biological materials, are natural fiber-reinforced composite materials. Their mechanical properties are highly dependent on the interplay of the stiff fibrous phase and the soft matrix phase and on the matrix deformation itself. Using specific Arabidopsis thaliana mutants, we studied the mechanical role of the matrix assembly in primary cell walls of hypocotyls with altered xyloglucan and pectin composition. Standard microtensile tests and cyclic loading protocols were performed on mur1 hypocotyls with affected RGII borate diester cross-links and a hindered xyloglucan fucosylation as well as qua2 exhibiting 50% less homogalacturonan in comparison to wild-type. As a control, wild-type plants (Col-0) and mur2 exhibiting a specific xyloglucan fucosylation and no differences in the pectin network were utilized. In the standard tensile tests, the ultimate stress levels (approximately tensile strength) of the hypocotyls of the mutants with pectin alterations (mur1, qua2) were rather unaffected, whereas their tensile stiffness was noticeably reduced in comparison to Col-0. The cyclic loading tests indicated a stiffening of all hypocotyls after the first cycle and a plastic deformation during the first straining, the degree of which, however, was much higher for mur1 and qua2 hypocotyls. Based on the mechanical data and current cell wall models, it is assumed that folded xyloglucan chains between cellulose fibrils may tend to unfold during straining of the hypocotyls. This response is probably hindered by geometrical constraints due to pectin rigidity.

Disrupting two Arabidopsis thaliana xylosyltransferase genes results in plants deficient in xyloglucan, a major primary cell wall component.

Xyloglucans are the main hemicellulosic polysaccharides found in the primary cell walls of dicots and nongraminaceous monocots, where they are thought to interact with cellulose to form a three-dimensional network that functions as the principal load-bearing structure of the primary cell wall. To determine whether two Arabidopsis thaliana genes that encode xylosyltransferases, XXT1 and XXT2, are involved in xyloglucan biosynthesis in vivo and to determine how the plant cell wall is affected by the lack of expression of XXT1, XXT2, or both, we isolated and characterized xxt1 and xxt2 single and xxt1 xxt2 double T-DNA insertion mutants. Although the xxt1 and xxt2 mutants did not have a gross morphological phenotype, they did have a slight decrease in xyloglucan content and showed slightly altered distribution patterns for xyloglucan epitopes. More interestingly, the xxt1 xxt2 double mutant had aberrant root hairs and lacked detectable xyloglucan. The reduction of xyloglucan in the xxt2 mutant and the lack of detectable xyloglucan in the xxt1 xxt2 double mutant resulted in significant changes in the mechanical properties of these plants. We conclude that XXT1 and XXT2 encode xylosyltransferases that are required for xyloglucan biosynthesis. Moreover, the lack of detectable xyloglucan in the xxt1 xxt2 double mutant challenges conventional models of the plant primary cell wall.

In situ investigation of complex BaSO4 fiber generation in the presence of sodium polyacrylate. 2. Crystallization mechanisms.

The formation mechanisms of complex BaSO(4) fiber bundles and cones in the presence of polyacrylate sodium salt via a bioinspired approach at ambient temperature in an aqueous environment are reported. These complex organic-inorganic hybrid structures assemble after heterogeneous nucleation of amorphous precursor particle aggregates on polar surfaces, and the crystallization area can be patterned. In contrast to earlier reports, three different mechanisms based on the oriented attachment of nanoparticles were revealed for the formation of typical fibrous superstructures depending on the supersaturation or on the number of precursor particles. (A) High supersaturation (S > 2): large amorphous aggregates stick to a polar surface, form fiber bundles after mesoscopic transformation and oriented attachment, and then form a narrow tip through polymer interaction. (B) Low supersaturation (S = 1.02-2): only a few fibers nucleate heterogeneously from a single nucleation spot, and amorphous particles stick to existing fibers, which results in the formation of a fiber bundle. (C) Vanishing supersaturation (S = 1-1.02): nucleation of a fiber bundle from a single nucleation spot with self-limiting repetitive growth as a result of the limited amount of building material. These growth processes are supported by time-resolved optical microscopy in solution, TEM, SEM, and DLS.

Molecular changes during tensile deformation of single wood fibers followed by Raman microscopy.

Raman spectra were acquired in situ during tensile straining of mechanically isolated fibers of spruce latewood. Stress-strain curves were evaluated along with band positions and intensities to monitor molecular changes due to deformation. Strong correlations (r = 0.99) were found between the shift of the band at 1097 cm(-1) corresponding to the stretching of the cellulose ring structure and the applied stress and strain. High overall shifts (-6.5 cm(-1)) and shift rates (-6.1 cm(-1)/GPa) were observed. After the fiber failed, the band was found on its original position again, proving the elastic nature of the deformation. Additionally, a decrease in the band height ratio of the 1127 and 1097 cm(-1) bands was observed to go hand in hand with the straining of the fiber. This is assumed to reflect a widening of the torsion angle of the glycosidic C-O-C bonding. Thus, the 1097 cm(-1) band shift and the band height ratio enable one to follow the stretching of the cellulose at a molecular level, while the lignin bands are shown to be unaffected. Observed changes in the OH region are shown and interpreted as a weakening of the hydrogen-bonding network during straining. Future experiments on different native wood fibers with variable chemical composition and cellulose orientation and on chemically and enzymatically modified fibers will help to deepen the micromechanical understanding of plant cell walls and the associated macromolecules.