A Microporous Multi-Cage Metal-Organic Framework for an Effective One-Step Separation of Branched Alkanes Feeds.

The improvement of the Total Isomerization Process (TIP) for the production of high-quality gasoline with the ultimate goal of reaching a Research Octane Number (RON) higher than 92 requires the use of specific sorbents to separate pentane and hexane isomers into classes of linear, mono- and di-branched isomers. Herein we report the design of a new multi-cage microporous Fe(III)-MOF (referred to as MIP-214, MIP stands for materials of the Institute of Porous Materials of Paris) with a flu-e topology, incorporating an asymmetric heterofunctional ditopic ligand, 4-pyrazolecarboxylic acid, that exhibits an appropriate microporous structure for a thermodynamic-controlled separation of hydrocarbon isomers. This MOF produced via a direct, scalable, and mild synthesis route was proven to encompass a unique separation of C5/C6 isomers by classes of low RON over high RON alkanes with a sorption hierarchy: (n-hexane≫n-pentane≈2-methylpentane>3-methylpentane)low RON≫(2,3-dimethylbutane≈i-pentane≈2,2-dimethylbutane)high RON following the adsorption enthalpy sequence. We reveal for the first time that a single sorbent can efficiently separate such a complex mixture of high RON di-branched hexane and mono-branched pentane isomers from their low RON counterparts, which is a major achievement reported so far.

Confined Water Cluster Formation in Water Harvesting by Metal-Organic Frameworks: CAU-10-H versus CAU-10-CH3.

Several metal-organic frameworks (MOFs) excel in harvesting water from the air or as heat pumps as they show a steep increase in water uptake at 10-30 % relative humidity (RH%). A precise understanding of which structural characteristics govern such behavior is lacking. Herein, CAU-10-H and CAU-10-CH3 are studied with H, CH3 corresponding to the functions grafted to the organic linker. CAU-10-H shows a steep water uptake ≈18 RH% of interest for water harvesting, yet the subtle replacement of H by CH3 in the organic linker drastically changes the water adsorption behavior to less steep water uptake at much higher humidity values. The materials' structural deformation and water ordering during adsorption with in situ sum-frequency generation, in situ X-ray diffraction, and molecular simulations are unraveled. In CAU-10-H, an energetically favorable water cluster is formed in the hydrophobic pore, tethered via H-bonds to the framework µï£¿OH groups, while for CAU-10-CH3, such a favorable cluster cannot form. By relating the findings to the features of water adsorption isotherms of a series of MOFs, it is concluded that favorable water adsorption occurs when sites of intermediate hydrophilicity are present in a hydrophobic structure, and the formation of energetically favorable water clusters is possible.

Room-Temperature Solid-State Transformation of Na4 SnS4 ⋠14H2 O into Na4 Sn2 S6 ⋠5H2 O: An Unusual Epitaxial Reaction Including Bond Formation, Mass Transport, and Ionic Conductivity.

A highly unusual solid-state epitaxy-induced phase transformation of Na4 SnS4 ⋅ 14H2 O (I) into Na4 Sn2 S6 ⋅ 5H2 O (II) occurs at room temperature. Ab initio molecular dynamics (AIMD) simulations indicate an internal acid-base reaction to form [SnS3 SH]3- which condensates to [Sn2 S6 ]4- . The reaction involves a complex sequence of O-H bond cleavage, S2- protonation, Sn-S bond formation and diffusion of various species while preserving the crystal morphology. In situ Raman and IR spectroscopy evidence the formation of [Sn2 S6 ]4- . DFT calculations allowed assignment of all bands appearing during the transformation. X-ray diffraction and in situ 1 H NMR demonstrate a transformation within several days and yield a reaction turnover of ≈0.38 %/h. AIMD and experimental ionic conductivity data closely follow a Vogel-Fulcher-Tammann type T dependence with D(Na)=6×10-14  m2 s-1 at T=300 K with values increasing by three orders of magnitude from -20 to +25 °C.

Isoreticular Chemistry of Group 13 Metal-Organic Framework Compounds Based on V-Shaped Linker Molecules: Exceptions to the Rule?

Following the concept of isoreticular chemistry, we carried out a systematic study on Ga-containing metal-organic frameworks (MOFs) using six V-shaped linker molecules of differing sizes, geometries, and additional functional groups. The linkers included three isophthalic acid derivatives (m-H2BDC-R, R = CH3, OCH3, NHCOCH3), thiophene-2,5-dicarboxylic acid (H2TDC), and two 4,4'-sulfonyldibenzoic acid derivatives (H2SDBA, DPSTA). The crystal structures of seven compounds were elucidated by a combination of model building, single-crystal X-ray diffraction (SCXRD), three-dimensional electron diffraction (3D ED), and Rietveld refinements against powder X-ray diffraction (PXRD) data. Four new Ga-MOFs that are isoreticular with their aluminum counterparts, i.e. Ga-CAU-10-R (Ga(OH)(m-BDC-R); R = OCH3, NHCOCH3), Ga-CAU-11 (Ga(OH)(SDBA)), and Ga-CAU-11-COOH (Ga(OH)(H2DPSTC)), were obtained. For the first time large single crystals of a MOF crystallizing in the CAU-10 structure type could be isolated, i.e. Ga-CAU-10-OCH3, which permitted a detailed structural characterization. In addition, the use of 5-methylisophthalic acid and thiophene-2,5-dicarboxylic acid resulted in two new Ga-MOFs denoted Ga-CAU-49 and Ga-CAU-51, respectively, which are not isostructural with any known Al-MOF. The crystal structure of Ga-CAU-49 ([Ga4(m-HBDC-CH3)2(m-BDC-CH3)3(OH)4(H2O)]) contains an unprecedented rod-shaped inorganic building unit (IBU) of the formula ∞1{Ga16(OH)18O60}, composed of corner-sharing GaO5 and GaO6 polyhedra. In Ga-CAU-51 ([Ga(OH)(C5H2O2S)]) chains of alternating cis and trans corner-sharing GaO6 polyhedra form the IBU. A detailed characterization of the title compounds was carried out, including nitrogen gas and water vapor sorption measurements. Ga-CAU-11 was the only compound exhibiting porosity toward nitrogen with a type I isotherm, a specific surface area of aS,BET = 210 m2/g, and a micropore volume of Vmic = 0.09 cm3/g. The new MOF Ga-CAU-51 exhibits exceptional water sorption properties with a reversible S-shaped isotherm and a high uptake around p/p0 = 0.38 of mads = 370 mg/g.

An Anthracene-Based Metal-Organic Framework for Selective Photo-Reduction of Carbon Dioxide to Formic Acid Coupled with Water Oxidation.

A Zr-based metal-organic framework has been synthesized and employed as a catalyst for photochemical carbon dioxide reduction coupled with water oxidation. The catalyst shows significant carbon dioxide reduction property with concomitant water oxidation. The catalyst has broad visible light as well as UV light absorption property, which is further confirmed from electronic absorption spectroscopy. Formic acid was the only reduced product from carbon dioxide with a turn-over frequency (TOF) of 0.69 h-1 in addition to oxygen, which was produced with a TOF of 0.54 h-1 . No external photosensitizer is used and the ligand itself acts as the light harvester. The efficient and selective photochemical carbon dioxide reduction to formic acid with concomitant water oxidation using Zr-based MOF as catalyst is thus demonstrated here.

An acetoxy functionalized Al(III) based metal-organic framework showing selective "turn on" detection of perborate in environmental samples.

Here, we have described the design, preparation and detailed characterization of a new acetoxy functionalized aluminium based metal-organic framework (MOF) called CAU-10-OCOCH3 (1) (CAU stands for Christian-Albrechts-University). The desolvated compound was employed for the detection of perborate in a pure aqueous environment. The presented MOF based perborate sensing probe (1) was synthesized by employing 5-acetoxyisophthalic acid and AlCl3·6H2O as the linker molecule and metal salt source, respectively, in DMF/H2O medium at 120 °C for 12 h. The material (1') showed a very selective fluorescent turn-on response towards perborate in aqueous medium with the coexistence of several competitive analytes. A dramatic increment (65 fold) in emission intensity of the probe was observed within 5 min of the addition of perborate. A chemo-selective reaction between perborate and the acetoxy functionality and subsequent hydrolysis of the acetoxy group to the hydroxy group is the main cause of the turn-on nature of detection. The material showed a detection limit of 1.19 µM. The probe was also applied for the recognition of perborate in several environmental water samples. The material is the first ever MOF based probe for selective detection of perborate.

Influence of Thermal and Mechanical Stimuli on the Behavior of Al-CAU-13 Metal-Organic Framework.

The response of the metal-organic framework aluminum-1,4-cyclohexanedicarboxylate or Al-CAU-13 (CAU: Christian Albrecht University) to the application of thermal and mechanical stimuli was investigated using synchrotron powder X-ray diffraction (SPXRD). Variable temperature in situ SPXRD data, over the range 80-500 K, revealed a complex evolution of the structure of the water guest containing Al-CAU-13H2O, the dehydration process from ca. 310 to 370 K, and also the evolution of the guest free Al-CAU-13 structure between ca. 370 and 500 K. Rietveld refinement allowed this complexity to be rationalized in the different regions of heating. The Berman thermal Equation of State was determined for the two structures (Al-CAU-13H2O and Al-CAU-13). Diamond anvil cell studies at elevated pressure (from ambient to up to ca. 11 GPa) revealed similarities in the structural responses on application of pressure and temperature. The ability of the pressure medium to penetrate the framework was also found to be important: non-penetrating silicone oil caused pressure induced amorphization, whereas penetrating helium showed no plastic deformation of the structure. Third-order Vinet equations of state were calculated and show Al-CAU-13H2O is a hard compound for a metal-organic framework material. The mechanical response of Al-CAU-13, with tetramethylpyrazine guests replacing water, was also investigated. Although the connectivity of the structure is the same, all the linkers have a linear e,e-conformation and the structure adopts a more open, wine-rack-like arrangement, which demonstrates negative linear compressibility (NLC) similar to Al-MIL-53 and a significantly softer mechanical response. The origin of this variation in behavior is attributed to the different linker conformation, demonstrating the influence of the S-shaped a,a-conformation on the response of the framework to external stimuli.

A Tetratopic Phosphonic Acid for the Synthesis of Permanently Porous MOFs: Reactor Size-Dependent Product Formation and Crystal Structure Elucidation via Three-Dimensional Electron Diffraction.

Following the strategy of installing porosity in coordination polymers predefined by linker geometry, we employed the new tetratopic linker molecule 1,1,2,2-tetrakis[4-phosphonophenyl]ethylene (H8TPPE) for the synthesis of new porous metal phosphonates. A high-throughput study was carried out using Ni2+ and Co2+ as metal ions, and a very strong influence of the reactor size on the product formation is observed while maintaining the same reaction parameters. Using small autoclaves (V = 250 µL), single crystals of isostructural mononuclear complexes of the composition [Ni(H3DPBP)2(H2O)4] (1) and [Co(H3DPBP)2(H2O)4] (2) are formed. They contain the linker molecule H4DPBP (4,4'-diphosphonobenzophenone), which is formed in situ by oxidation of H8TPPE. Using autoclaves with a volume of V = 2 mL, two new 3D metal-organic frameworks (MOFs) of composition [Ni2(H4TPPE)(H2O)6]·4H2O (CAU-46) and [Co2(H4TPPE)(H2O)4]·3H2O (CAU-47) were isolated in bulk quantities, and their crystal structures were determined from three-dimensional electron diffraction (3D ED) and powder X-ray diffraction data. Using even larger autoclaves (V = 30 mL), another 3D MOF of the composition [Co2(H4TPPE)]·6H2O (Co-CAU-48) was obtained, and a structure model was established via 3D ED measurements. Remarkably, the isostructural compound [Ni2(H4TPPE)]·9H2O (Ni-CAU-48) is only obtained indirectly, i.e., via thermal activation of CAU-46. As the chosen linker geometry leads to the formation of MOFs, topological analyses were carried out, highlighting the different connectivities observed in the three frameworks. Porosity of the compounds was proven via water sorption experiments, resulting in uptakes of 126 mg/g (CAU-46), 105 mg/g (CAU-47), 210 mg/g (Ni-CAU-48), and 109 mg/g (Co-CAU-48).

Design and Precursor-based Solid-State Synthesis of Mixed-Linker Zr-MIL-140A.

Acetic acid, an alternative green solvent, was utilized for the solvothermal synthesis of four 2D materials of composition [Zr2O2(OAc)2(BDC-F)], [Zr2O2(OAc)2(BDC-F4)], [Zr2O2(OAc)2(BDC)], and [Zr2O2(OAc)2(NDC)] (BDC, terephthalate; BDC-F, 2-fluoroterephthalate; BDC-F4, tetrafluoroterephthalate; NDC, 2,6-naphthalenedicarboxylate). The first three compounds were subsequently reacted with terephthalic acid in solid-state reactions to form porous MIL-140A-type metal-organic frameworks and mixed-linker derivatives ([ZrO(BDC)1-x(BDC-Y)x], x = 0-0.18, Y = F, F4). The reaction kinetics of the formation of MIL-140A were investigated with the aid of time-resolved synchrotron and temperature-resolved in-house X-ray powder diffraction experiments. Thorough compositional analyses and solid-state NMR spectroscopic experiments were used to assess the crystallographic ordering of the different linker molecules. Additionally, acetic acid-based routes for the direct synthesis of MIL-140A-NO2 and a novel MIL-140A-(CH3)2 derivative were discovered.

Synthesis and Exfoliation of a New Layered Mesoporous Zr-MOF Comprising Hexa- and Dodecanuclear Clusters as Well as a Small Organic Linker Molecule.

A new layered mesoporous Zr-MOF of composition [Zr30O20(OH)26(OAc)18L18] was synthesized by employing 5-acetamidoisophthalic acid (H2L) using acetic acid as the solvent. The new MOF, denoted as CAU-45, exhibits a honeycomb structure of stacked layers which comprise both hexa- and dodecanucelar zirconium clusters. Its structure was solved from submicrometer-sized crystals by continuous rotation electron diffraction (cRED). Liquid phase exfoliation and size selection were successfully performed on the material.

Ce-MIL-140: expanding the synthesis routes for cerium(iv) metal-organic frameworks.

A microwave-assisted synthesis method for Ce(iv)-based MOFs crystallizing in the MIL-140 structure has been developed. Three different linker molecules, i.e. terephthalic acid (H2BDC), 2-chloroterephthalic acid (H2BDC-Cl) and 2,6-naphtalenedicarboxylic acid (H2NDC) that have previously been used for the synthesis of Ce-UiO-66 which contains hexanuclear Ce-O clusters as the inorganic building unit (IBU), were employed. Under solvothermal reaction conditions (140 °C) with acetonitrile as the solvent the compounds Ce-MIL-140-BDC, -BDC-Cl and -NDC, with the general composition [CeO(linker)] were obtained as microcrystalline products. For all three MOFs an extended purification process had to be carried out. The MOFs were fully characterized and the structure of Ce-MIL-140-BDC was refined against PXRD data using the Rietveld method. In contrast to Zr-MIL-140-BDC a symmetry reduction to the space group P1[combining macron] is observed. The MIL-140 structure type is built up by infinite CeO7 polyhedra that are interconnected by dicarboxylate ions to generate 1D pores. For Ce-MIL-140-BDC the highest specific surface area of asBET = 222 m2 g-1 is observed and the MOF is thermally stable up to 370 °C. This new synthetic route to Ce(iv)-MOFs avoids the formation of the previously extremely dominant hexanuclear IBU, and paves the way for higher IBU diversity in Ce(iv)-MOFs.

Polymorphous Indium Metal-Organic Frameworks Based on a Ferrocene Linker: Redox Activity, Porosity, and Structural Diversity.

The metallocene-based linker molecule 1,1'-ferrocenedicarboxylic acid (H2FcDC) was used to synthesize four different polymorphs of composition [In(OH)(FeC12H8O4)]. Using conventional solvent-based synthesis methods and varying the synthetic parameters such as metal source, reaction temperature, and solvent, two different MOFs and one 1D-coordination polymer denoted as CAU-43 (1), In-MIL-53-FcDC_a (2), and In-FcDC (3) were obtained. Furthermore, thermal treatment of CAU-43 (1) at 190 °C under vacuum yielded a new polymorph of 2, In-MIL-53-FcDC_b (4). Both MOFs 2 and 4 crystallize in a MIL-53 type structure, but in different space groups C2/m for 2 and P1̅ for 4. The structures of the four title compounds were determined by single-crystal X-ray diffraction (SCXRD), powder X-ray diffraction (PXRD), or a combination of three-dimensional electron diffraction measurements (3D ED) and PXRD. N2 sorption experiments of 1, 2, and 4 showed specific surface areas of 355 m2 g-1, 110 m2 g-1, and 140 m2 g-1, respectively. Furthermore, the electronic properties of the title compounds were characterized via Mössbauer and EPR spectroscopy. All Mössbauer spectra showed the characteristic doublet, proving the persistence of the ferrocene moiety. In the cases of 1, 3, and 4, appreciable impurities of ferrocenium ions could be detected by electron paramagnetic resonance spectroscopy. Cyclovoltammetric experiments were performed to demonstrate the accessible redox activity of the linker molecule of the title compounds. A redox process of FcDC2- with oxidation (between 0.86 and 0.97 V) and reduction wave (between 0.69 and 0.80 V) was observed.

Aqueous Flow Reactor and Vapour-Assisted Synthesis of Aluminium Dicarboxylate Metal-Organic Frameworks with Tuneable Water Sorption Properties.

Energy-efficient indoors temperature and humidity control can be realised by using the reversible adsorption and desorption of water in porous materials. Stable microporous aluminium-based metal-organic frameworks (MOFs) present promising water sorption properties for this goal. The development of synthesis routes that make use of available and affordable building blocks and avoid the use of organic solvents is crucial to advance this field. In this work, two scalable synthesis routes under mild reaction conditions were developed for aluminium-based MOFs: (1) in aqueous solutions using a continuous-flow reactor and (2) through the vapour-assisted conversion of solid precursors. Fumaric acid, its methylated analogue mesaconic acid, as well as mixtures of the two were used as linkers to obtain polymorph materials with tuneable water sorption properties. The synthesis conditions determine the crystal structure and either the MIL-53 or MIL-68 type structure with square-grid or kagome-grid topology, respectively, is formed. Fine-tuning resulted in new MOF materials thus far inaccessible through conventional synthesis routes. Furthermore, by varying the linker ratio, the water sorption properties can be continuously adjusted while retaining the sigmoidal isotherm shape advantageous for heat transformation and room climatisation applications.

Influence of the substitution pattern of four naphthalenedicarboxylic acids on the structures and properties of group 13 metal-organic frameworks and coordination polymers.

Metal-organic frameworks containing Ga3+ ions and four differently substituted naphthalenedicarboxylates (ndc2-) have been synthesized and characterized. The Ga3+ ions are six-fold coordinated by oxygen atoms in all title compounds, but two different inorganic building units, i.e. trans corner-sharing and cis,trans edge-sharing octahedra are observed. Crystal structures were validated by Rietveld refinements against powder X-ray diffraction data. [Ga(OH)(1,4-ndc)]·2H2O crystallizes in a non-breathing MIL-53 type structure with two different pore sizes (5.5 × 5.5 Å and 9 × 9 Å). It is non-porous with respect to nitrogen but has a water adsorption capacity of about 155 mg g-1 and a thermal stability of up to 240 °C. The dense compound [Ga(OH)(1,8-ndc)] crystallizes in a new layered structure motif, which is related to the crystal structure of MIL-122 ([Al(OH)((O2C)4C6H2)]). The third and fourth compounds [Ga2(OH)4(2,3-ndc)]·H2O and [Ga(OH)(2,6-ndc)]·H2O are isoreticular to CAU-15 ([Al2(OH)4(2,3-bdc)]·H2O) and MIL-69 ([Al(OH)(2,6-ndc)]·H2O), respectively. The last two compounds are non-porous toward nitrogen but reversible dehydration was demonstrated. For comparison, the two new compounds [Al(OH)(1,8-ndc)] and [Al2(OH)4(2,3-ndc)]·H2O, which are isostructural to the newly described gallium compounds, were also synthesized and fully characterized. The Al-containing coordination polymers exhibit higher temperature stabilities compared to their isostructural Ga compounds.

Solvent Impact on the Properties of Benchmark Metal-Organic Frameworks: Acetonitrile-Based Synthesis of CAU-10, Ce-UiO-66, and Al-MIL-53.

Herein is reported the utilization of acetonitrile as a new solvent for the synthesis of the three significantly different benchmark metal-organic frameworks (MOFs) CAU-10, Ce-UiO-66, and Al-MIL-53 of idealized composition [Al(OH)(ISO)], [Ce6 O4 (OH)4 (BDC)6 ], and [Al(OH)(BDC)], respectively (ISO2- : isophthalate, BDC2- : terephthalate). Its use allowed the synthesis of Ce-UiO-66 on a gram scale. While CAU-10 and Ce-UiO-66 exhibit properties similar to those reported elsewhere for these two materials, the obtained Al-MIL-53 shows no structural flexibility upon adsorption of hydrophilic or hydrophobic guest molecules such as water and xenon and is stabilized in its large-pore form over a broad temperature range (130-450 K). The stabilization of the large-pore form of Al-MIL-53 was attributed to a high percentage of noncoordinating -COOH groups as determined by solid-state NMR spectroscopy. The defective material shows an unusually high water uptake of 310 mg g-1 within the range of 0.45 to 0.65 p/p°. In spite of showing no breathing effect upon water adsorption it exhibits distinct mechanical properties. Thus, mercury intrusion porosimetry studies revealed that the solid can be reversibly forced to breathe by applying moderate pressures (≈60 MPa).

A Thiophene-2-carboxamide-Functionalized Zr(IV) Organic Framework as a Prolific and Recyclable Heterogeneous Catalyst for Regioselective Ring Opening of Epoxides.

A new thiophene-2-carboxamide-functionalized Zr-UiO-66 MOF (1) was synthesized by employing a traditional solvothermal procedure. Compound 1 displayed high thermal (up to 340 °C under an Ar atmosphere) and chemical stability (in water, 1 M HCl, and acetic acid). A nitrogen physisorption measurement with the activated form of 1 (denoted 1') exhibited a BET surface area (781 m2/g) despite attachment of a bulky side chain with the linker molecule. Compound 1' was able to heterogeneously catalyze the ring-opening reaction of epoxides with  amines. Catalyst 1' exhibited significant yields as well as wide substrate scope in the ring opening of epoxides by means of amines. It also displayed better catalytic performance in comparison to known MOF catalysts such as Cu3(BTC)2, Fe(BTC) (BTC: 1, 3, 5-benzenetricarboxylate), and Zr-UiO-66. Control experiments were performed with free linker,  Zr(IV) salt and without catalyst 1', confirming the exclusive role of 1' in the catalytic reaction. The reusability characteristics of catalyst 1' was established for up to five consecutive catalytic cycles. The synthesis and characterization of the linker molecule, material 1, and 1' and mechanism of the catalysis reaction were studied elaborately.

A porous and redox active ferrocenedicarboxylic acid based aluminium MOF with a MIL-53 architecture.

A metallocene based linker 1,1'-ferrocenedicarboxylic acid (H2FcDC) was used to synthesise the first permanently porous ferrocenedicarboxylate, exhibiting a MIL-53 architecture. This compound Al-MIL-53-FcDC [Al(OH)(FcDC)] is obtained in glass vials under mild synthesis conditions at ≤100 °C and after a short reaction time of 90 min. The crystal structure was determined from powder X-ray diffraction data and the compound shows porosity towards N2 and H2O, exhibiting a BET surface area of 340 m2 g-1. Furthermore, the MOF was characterised via EPR and Mössbauer spectroscopy. The Mössbauer spectrum of Al-MIL-53-FcDC shows a characteristic doublet with an isomeric shift of 0.34 mm s-1 and a quadrupole splitting of 2.39 mm s-1, proving the persistence of the ferrocene moiety. A negligibly small amount of impurities of ferrocenium ions could be detected by EPR spectroscopy as a complementary technique. Cyclic voltammetric experiments demonstrated the accessible redox activity of the linker molecule FcDC2- in Al-MIL-53-FcDC. A reversible oxidation and reduction signal (0.75 V and 0.64 V, respectively, vs. Ag) of FcDC2- was observed and maintained during forty CV cycles, while the crystallinity of the MOF remained unchanged after the experiment.

Acetylenedicarboxylate-based cerium(iv) metal-organic framework with fcu topology: a potential material for air cleaning from toxic halogen vapors.

The most contracted cerium(iv)-based metal-organic framework (MOF) with fcu topology incorporating an alkyne-based linker, namely acetylenedicarboxylate (ADC), was synthesized under green conditions in water at room temperature and thoroughly characterized. The structure of this new MOF, denoted as Ce-HHU-1, was determined from powder X-ray diffraction data and Rietveld refinement and is made up of octahedral [Ce6O4(OH)4]12+ clusters, each of which is connected to other inorganic units by twelve ADC linkers to give a porous network with fcu topology analogous with UiO-66. The permanent microporosity of Ce-HHU-1 was confirmed by nitrogen sorption, meanwhile its high hydrophilicity was displayed by a type I water vapor sorption isotherm. The adsorption of CO2 in Ce-HHU-1 features a remarkably high zero-coverage isosteric heat of adsorption of 47 kJ mol-1, attributed to the presence of the -C[triple bond, length as m-dash]C- triple-bond in the framework. The latter also allows for Ce-HHU-1 to capture and irreversibly chemisorb Br2 vapors, as well as both chemi- and physisorb I2 vapors in an effective manner, making this material potentially applicable for air cleaning from toxic halogen vapors.

Acetylenedicarboxylate and In Situ Generated Chlorofumarate-Based Hafnium(IV)-Metal-Organic Frameworks: Synthesis, Structure, and Sorption Properties.

New acetylenedicarboxylate (ADC) and chlorofumarate (Fum-Cl) based hafnium-metal-organic frameworks have been synthesized by alternatively reacting acetylenedicarboxylic acid in DMF or water with appropriate hafnium salt, in the presence of acetic acid modulator. The two materials of respective ideal formulas [Hf6O4(OH)4(ADC)6] (Hf-HHU-1) and [Hf6O4(OH)4(Fum-Cl)6] (Hf-HHU-2) have been structurally characterized by powder X-ray diffraction to be UiO-66 isostructural, consisting of octahedral [Hf6O4(OH)4]12+ secondary building units each connected to other units by 12 ADC or Fum-Cl linkers into a microporous network with fcu topology. This structure was confirmed by Rietveld refinement. Hf-HHU-2 is formed by in situ hydrochlorination of acetylenedicarboxylic acid to chlorofumarate. Its presence has been determined by combined Raman spectroscopy, solid-state NMR, scanning electron microscopy, energy dispersive X-ray and X-ray photoelectron spectroscopies. Hf-HHU-1 and Hf-HHU-2 exhibit very high hydrophilicity as revealed by their water sorption profiles, meanwhile Hf-HHU-2 adsorbs CO2 with an isosteric heat of 39 kJ mol-1. Hf-HHU-2 also adsorbs molecular iodine vapor exclusively as polyiodide anions due to grafted chloro-functions on the pores surface. It has been observed that defective nanodomains with reo tolopology can be introduced in the structure of Hf-HHU-2 by variation of the linker to metal-salt molar ratio.

Expanding the Variety of Zirconium-based Inorganic Building Units for Metal-Organic Frameworks.

Two new zirconium-based metal-organic frameworks with the composition [Zr6 O4 (OH)4 (OAc)6 (BDC)3 ] (CAU-26) and [Zr5 O4 (OH)4 (OAc)4 (BDC)2 ] (CAU-27) are reported, which were synthesized from acetic acid, a rarely utilized but green and sustainable solvent (BDC2- : 1,4-benzenedicarboxylate). Structure determination aided by automated electron diffraction tomography revealed that CAU-26 is composed of layers of well-known {Zr6 O8 } clusters interconnected by terephthalate ions. In contrast CAU-27 exhibits a three-dimensional structure with a so far unknown type of one-dimensional inorganic building unit (IBU), which can be rationalized as condensed polyhedron-sharing chains of {Zr6 O8 } clusters. CAU-26 occurs as an intermediate of the CAU-27 synthesis and can be isolated easily, when reaction temperature and time are decreased. We were also able to synthesize two isoreticular derivatives of CAU-27 with extended linker molecules by implementing 4,4'-biphenyldicarboxylic acid (H2 BPDC) and 5,5'-dicarboxy-2,2'-bipyridine (H2 BIPY). All materials show high thermal and chemical stability as well as permanent microporosity. The excellent stability of CAU-27-BIPY was exploited to synthesize a performant iridium-supported heterogeneous MOF-based catalyst for the direct C-H borylation of arenes.