Closed Reduction for the Treatment of Traumatic Thoracolumbar Spondylolisthesis.

OBJECTIVE: Thoracolumbar traumatic spondylolisthesis is a relatively rare phenomenon and has poor prognosis due to serious spinal cord or cauda equina injuries. In such cases, closed reduction is a method for restoring the vertebral sequence and may play an important role in the treatment process, although whether it is actually feasible for patients with this condition requires further investigation. The present study included 9 patients with serious thoracolumbar traumatic spondylolisthesis to determine the advantages of closed reduction over total reduction through open surgery. METHODS: Data from 9 patients (cases 1-9), diagnosed with severe thoracolumbar traumatic spondylolisthesis between June 2012 and August 2023, were retrospectively reviewed. Five patients were treated with closed reduction in an emergency department and subsequently underwent delayed internal fixation surgery at least 48 hours after the injury, and 4 with similar serious injuries underwent emergency surgery. The incidence of complications and recovery of the spinal cord or cauda equina were compared between groups. RESULTS: There were no significant differences in demographic characteristics or adverse events between the 2 groups. The reduction group had a shorter surgical duration and less blood loss than the surgery group. Although patients in the surgery group may have experienced more pain, there were no significant differences between the groups in Oswestry Disability Index or Japanese Orthopaedic Association scores. Thus, regardless of whether closed reduction was chosen, patients experienced a similar quality of life for a relatively prolonged period. CONCLUSIONS: Closed reduction may be feasible for serious thoracolumbar traumatic spondylolisthesis, although the safety of this method requires further research.

TfR1 mediated iron metabolism dysfunction as a potential therapeutic target for osteoarthritis.

OBJECTIVE: Transferrin receptor-1 (TfR1) plays important roles in controlling cellular iron levels, but its role in OA pathology is unknown. Herein we aim to investigate the role of TfR1 in OA progression and its underlying mechanisms. METHODS: TfR1 expression in cartilage during OA development were examined both in vivo and in vitro. Then IL-1ß was used to induce chondrocytes degeneration in vitro and TfR1 siRNA was used for observing the effect of TfR1 in modulating iron homeostasis, mitochondrial function and degrading enzymes expression. Also the inhibitor of TfR1 was exploited to analyze the protective effect of TfR1 inhibition in vivo. RESULTS: TfR1 is elevated in OA cartilage and contributes to OA inflammation condition. Excess iron not only results in oxidative stress damage and sensitizes chondrocytes to ferroptosis, but also triggers c-GAS/STING-mediated inflammation by promoting mitochondrial destruction and the release of mtDNA. Silencing TfR1 using TfR1 siRNA not only reduced iron content in chondrocytes and inhibited oxidative stress, but also facilitated the mitophagy process and suppressed mtDNA/cGAS/STING-mediated inflammation. Importantly, we also found that Ferstatin II, a novel and selective TfR1 inhibitor, could substantially suppress TfR1 activity both in vivo and in vitro and ameliorated cartilage degeneration. CONCLUSION: Our work demonstrates that TfR1 mediated iron influx plays important roles in chondrocytes degeneration and OA pathogenesis, suggesting that maintaining iron homeostasis through the targeting of TfR1 may represent a novel therapeutic strategy for the treatment of OA.

Triglycerides Mediate the Relationship Between Maternal Free Thyroxine and Birth Weight: A Prospective Cohort Study from China.

Background: Fetal overgrowth (large for gestational age, LGA) is associated with an increased risk of maternal and fetal morbidity and adverse health outcomes. Thyroid hormones are key regulators of metabolism during pregnancy and fetal development. Lower maternal free thyroxine (fT4) and higher maternal triglyceride (TG) levels during early pregnancy are associated with higher birth weight. We aimed at examining the mediating role of maternal TG in the association between maternal fT4 and birth weight. Methods: We performed a large prospective cohort study including pregnant Chinese women who were treated at a tertiary obstetric center during the period of January 2016 to December 2018. We included 35,914 participants with complete medical records. We performed causal mediation analysis to decompose the overall effect of fT4 on birth weight and LGA with maternal TG as the mediator. Results: We observed statistically significant associations between maternal fT4, TG levels, and birth weight (all p < 0.0001). Using a four-way decomposition model, we identified a controlled direct effect (coefficient [confidence interval, CI], -0.038 [-0.047 to -0.029], p < 0.0001) that accounted for 63.9% of the total effect, in addition to the other three estimated effects (reference interaction, coefficient [CI] = -0.006 [-0.009 to -0.001], p = 0.008; mediated interaction, coefficient [CI] = 0.0004 [0.000 to 0.001], p = 0.008; and pure indirect effect, coefficient [CI] = -0.009 [-0.013 to -0.005], p < 0.0001) of TG on the association between fT4 and birth weight Z score. Moreover, maternal TG accounted for 21.6% and 20.7% (via mediation) and 13.6% and 41.6% (via maternal fT4 and TG interaction) of the total effect of maternal fT4 on fetal birth weight and LGA, respectively. The proportions of the total associations that could be reduced by "eliminating" the effect of maternal TG were 36.1% for birth weight and 65.1% for LGA, respectively. Conclusions: High maternal TG levels may play substantial mediating roles in the relationship between low fT4 levels in early pregnancy and increased birth weight and a higher risk of LGA. Further, the occurrence of fetal overgrowth may also be influenced by possible synergistic effects between fT4 and TG.

[Imaging study and clinical application of unilateral biportal endoscopy technique for upper lumbar disc herniation via contralateral approach].

Objective: To investigate the relationships between the bony structures, nerve, and indentations of ligamentum flavum of the upper lumbar spine by using CT three-dimensional reconstruction technique, in order to guide the unilateral biportal endoscopy (UBE) technique via contralateral approach in the treatment of upper lumbar disc herniation (ULDH). Methods: Twenty-one ULDH patients who were admitted between June 2019 and July 2021 and met the selection criteria were selected as the research subjects. There were 12 males and 9 females with an average age of 62.1 years (range, 55-72 years). The disease duration was 1-12 years (mean, 5.7 years). There was 1 case of L 1, 2, 4 cases of L 2, 3, and 16 cases of L 3, 4. The CT myelography data of T 12-S 3 segment was saved in DICOM format and imported into Mimics21.0 software for three-dimensional reconstruction. The relationship between the intersection (point Q) of spinous process and the inferior margin of lamina, the indentation of superior margin of ligamentum flavum, the inferior margin of nerve root origin, intervertebral space, and foramen were observed. The Mimics21.0 software was used to create a 3-mm-diameter cylinder to simulate the UBE channel and measure its abduction angle (∠b1), as well as measure the following lumbar vertebra-related indicators: in L 1,2-L 3,4 segments, the vertical distance from the point Q to the inferior margin of the contralateral lumbar pedicle of the same lumbar vertebra (a1), the superior margin of the contralateral pedicle of the lower lumbar vertebra (a2), the lower endplate of the same lumbar vertebra (a3), the upper endplate of the lower lumbar vertebra (a4); the vertical distance from the lower endplate of lumbar vertebra to the inferior margin of the lumbar pedicle (c1), the vertical distance from the upper endplate of the lower lumbar vertebra to the superior margin of the lumbar pedicle (c2); the vertical distance from the inferior margin of the nerve root origin to the superior margin (d1) and the inferior margin (d2) of the lumbar pedicle, respectively; the vertical distance from the intersection (point P) of the indentation of superior margin of ligamentum flavum and the medial margin of the lumbar pedicle to the superior margin (e1) and the inferior margin (e2) of the lumbar pedicle, respectively; the horizontal distance from the lateral margin of the dural mater (f1) and the narrowest part of the lumbar isthmus (f2) to the facet joint space, respectively. Thirteen of the patients included in the study chose the UBE surgery via contralateral approach. There were 8 males and 5 females with an average age of 63.3 years (range, 55-71 years). The disease duration was 2-12 years, with an average of 6.2 years. There were 3 cases of L 2, 3 and 10 cases of L 3, 4. The perioperative complications and surgical decompression were recorded. And the effectiveness were evaluated by visual analogue scale (VAS) score, Oswestry disability index (ODI), and short form-36 health survey (SF-36) score. Results: The imaging results showed that there was no significant difference in a1, a3, a4, e1, e2, f1, and f2 between segments ( P>0.05), and there were significant differences ( P<0.05) in a2 and c2 between L 1, 2 and L 3, 4 segments, in ∠b1 and d2 between L 1, 2, L 2, 3 segments and L 3, 4 segments, and in c1 and d1 between L 1, 2 and L 2, 3, L 3, 4 segments. The 87.30% (110/126) of point Q of L 1, 2-L 3, 4 segments corresponded to the inferior articular process, and 78.57% (99/126) of the lower endplate corresponded to the level of the isthmus. All 13 patients completed the UBE surgery via contralateral approach, and none were converted to open surgery. All patients were followed up 12-17 months (mean, 14.6) months. The VAS score of low back pain and leg pain, ODI, and SF-36 score at 6 and 12 months after operation significantly improved when compared with those before operation ( P<0.05), and further improved at 12 months after operation when compared with 6 months after operation ( P<0.05). The imaging review results showed that the herniated disc was removed and the dura mater was decompressed adequately. Conclusion: The point Q, the superior margin of ligamentum flavum, and lumbar pedicle can be used as the markers for the treatment of ULBD with UBE surgery via contralateral approach, making the procedure safer, more precise, and more effective.

Iron overload promotes intervertebral disc degeneration via inducing oxidative stress and ferroptosis in endplate chondrocytes.

Iron overload is a common phenomenon in the elderly population. Many clinical studies have indicated an association between iron overload and the incidence and pathological progression of intervertebral disc degeneration (IVDD). However, the role and underlying mechanism by which iron participates in the progression of IVDD has not yet been reported. In the present study, we aimed to elucidate the connection between iron overload and IVDD, and explore the underlying mechanisms of disease. Firstly, a clinical epidemiology study was conducted and revealed that iron overload is an independent risk factor for human IVDD. To elucidate the role of iron overload in IVDD, an iron overload mouse model was established, and we observed that iron overload promoted IVDD and cartilage endplate degeneration in a dose dependent manner. Endplate chondrocytes were further isolated and treated with FAC to mimic iron overload in vitro. Excess iron significantly promoted mineralization of endplate chondrocytes in addition to their degeneration via oxidative stress. Moreover, a high dose of excess iron promoted chondrocytes ferroptosis. An iron chelator (DFO), an antioxidant (NAC) and a ferroptosis inhibitor (Fer-1) demonstrated effective inhibition of endplate chondrocyte degeneration induced by iron overload, and our in vivo studies further demonstrated that DFO, NAC and Fer-1 could rescue high dose iron-induced IVDD and cartilage endplate calcification. In conclusion, our results indicate that iron overload is strongly associated with the onset and development of IVDD via oxidative stress and ferroptosis. Inhibiting oxidative stress or ferroptosis could therefore be promising therapeutic strategies for IVDD induced by iron overload.

Phase I 270° single-incision percutaneous spinal endoscopy for decompression treatment of thoracic spinal stenosis.

This study aimed to explore the feasibility of Phase I percutaneous spinal endoscopy with a 270° single incision in the ventral and dorsal dura mater for decompression treatment of thoracic spinal stenosis (TSS). Phase I percutaneous spinal endoscopy with a two-path (posterior and posterolateral approaches) single incision with a 270° decompression was performed in four cases of TSS with compression in the ventral and dorsal dura mater. The affected intervertebral space was located during the surgery, and the ossified ligamentum flavum in the ventral and dorsal dura mater was removed via laminectomy, which formed a decompression space in the thoracic cord. Next, posterolateral transforaminal expansion and plasty were performed to remove the ventral intervertebral disk. The visual analogue scale (VAS) score, thoracic spinal cord function score of the Japanese Orthopaedic Association (JOA) (11-point method), and Oswestry Disability Index (ODI) scores were used to evaluate the clinical efficacy. No dura mater or thoracic nerve injury occurred during the surgery. The symptoms of weakness in the lower extremities improved after the surgery. The postoperative magnetic resonance imaging and computed tomography examinations showed compression removal and dura mater bulging. The postoperative VAS, JOA, and ODI scores improved compared with the preoperative scores. Two surgical trajectories, posterior and posterolateral approaches, were established by a single incision using thoracic spinal canal decompression with Phase I 270° single-incision percutaneous spinal endoscopy. The posterior approach was performed mainly by translaminar unilateral fenestration and bilateral decompression in the ventral and dorsal dura mater, whereas the posterolateral approach was performed by decompression in the ventral dura mater to the midline of the vertebrae. This surgical method could be applied as a safe and feasible minimally invasive treatment for TSS with compression on both the ventral and dorsal dura mater.

Risk factors for proximal junctional kyphosis in adult spinal deformity after correction surgery: A systematic review and meta-analysis.

OBJECTIVE: This study aimed to conduct a systematic review and meta-analysis to assess the risk factors for proximal junctional kyphosis after the correction surgery of adult spinal deformity. METHODS: Relevant studies were systematically retrieved from databases including Cochrane Library, PubMed, and Embase. Based on inclusion and exclusion criteria, literature screening, quality evaluation, and data extraction were conducted. Analysis was performed with Revman 5.3 software. RESULTS: Sixteen studies with 2388 patients, covering 905 cases with proximal junctional kyphosis and 1483 cases without proximal junctional kyphosis, were included in the study. The high-risk factors for the development of proximal junctional kyphosis were found to be high body mass index, osteoporosis, severe fatty infiltration of paravertebral muscles, small functional area of paravertebral muscles, lumbar lordosis over-correction, lack of ligament reinforcement device at the proximal vertebrae and upper instrumented vertebra at the thoracolumbar segment, and pelvic fixation. The results were statistically significant. CONCLUSION: Evidence from this study has revealed that the independent risk factors for proximal junctional kyphosis complications after correction surgery of adult spinal deformity are high body mass index, osteoporosis, severe degeneration of paravertebral muscles, lumbar lordosis overcorrection, fixed fusion to the pelvis, and lack of ligament reinforcement device at the proximal vertebrae and upper instrumented vertebra at the thoracolumbar segment. LEVEL OF EVIDENCE: Level IV, Therapeutic Study.

Association Between Vertebral Rotatory Subluxation and the Apical Vertebra in Degenerative Lumbar Scoliosis.

OBJECTIVE: To identify the apical vertebra is relate to the occurrence of vertebral rotatory subluxation (VRS) in degenerative lumbar scoliosis. METHODS: In total, 86 patients with degenerative lumbar scoliosis included in this retrospective study were divided into 2 groups: with VRS and without VRS. Coronal and sagittal parameters were measured on whole-spine anteroposterior and lateral radiographs. The impact of VRS on the spine and pelvis parameters was statistically analyzed, and the correlation between the occurrence of VRS and the apical vertebra was analyzed by using logistic regression. RESULTS: VRS was present in 49 patients with degenerative lumbar scoliosis and absent in 37 patients. Compared with the patients without VRS, the patients with VRS had a smaller lumbar lordosis and thoracic kyphosis (P < 0.05) and a larger apical vertebra translation, apical vertebra tilt angle, Cobb angle, and pelvic incidence-lumbar lordosis (P < 0.05). Logistic regression analysis showed that apical vertebra translation and apical vertebra tilt angle were risk factors for the occurrence of VRS. The receiver operating characteristic curve analysis showed that apical vertebra translation greater than 23.2 mm and apical vertebra tilt angle greater than 11.8° were related to a greater probability of VRS in patients with degenerative lumbar scoliosis. CONCLUSIONS: VRS is an important characteristic to consider in degenerative lumbar scoliosis that can affect the coronal and sagittal alignment. The apical vertebra is correlated with the occurrence of VRS; an apical vertebra translation greater than 23.2 mm and apical vertebra tilt angle greater than 11.8° are highly correlate with the occurrence of VRS.

Upper endplate nonunion after transcorporeal percutaneous endoscopic cervical discectomy: A case report.

BACKGROUND: Transcorporeal percutaneous endoscopic cervical discectomy (TcPECD) destroys the integrity of the vertebral body. We herein discuss its long-term risks and avoidance measures. Case presentation: A 44-year-old woman underwent TcPECD. Although her upper limb symptoms were relieved after the operation, the bone channel did not heal and the endplate of the segment was altered. She consequently developed chronic neck and shoulder discomfort. CONCLUSION: Careful preoperative planning is needed to avoid non-healing of the bone channel following TcPECD. The diameter of the bony channel should be as small as possible and the channel should be opened at the posterior edge of the upper endplate to avoid collapse.

[Application of three-dimensional reconstruction simulation to define the starting point of lumbar cortical bone trajectory].

OBJECTIVE: CT three-dimensional reconstruction technology was used to simulate the placement of the lumbar cortical bone trajectory (CBT), to determine the starting point and direction of the screw trajectory. METHODS: Between February 2017 and April 2018, 24 patients with lumbar CT were selected as the study object. There were 7 males and 17 females, with an average age of 50.4 years (range, 37-68 years). The CT DICOM data of patients were imported into Mimics 16.0 software, and the three-dimensional model of lumbar spine was established. A 5 mm diameter cylinder was set up to simulate the CBT by using Mimics 16.0 software. According to the different implant schemes, the study was divided into groups A, B, and C, the track of the screw respectively passed through the upper edge, the medial edge, and the lower edge of the isthmus of the pedicle. The intersection of simulated screw and lumbar spine was marked as region of interest (ROI) and a mask was generated. The average CT value [Hounsfield unit (HU)] and the screw length of ROI were automatically measured by Mimics 16.0 software. In addition, the head inclination angle and head camber angle of the screw were measured respectively. Point F was the intersection of the level of the lowest edge of the transverse process and the lumbar isthmus periphery. The horizontal and vertical distance between point F and the starting point were measured, and the relationship between the three schemes and the position of the zygapophysial joint and spinous process was observed. RESULTS: Plan A has the highest ROI average HU, with the maximum value appearing in L 4; plan B has the longest screw length, with the maximum value appearing in L 5; plan C has the largest nail track head inclination angle, with the maximum value appearing in L 4; plan B has the largest nail track head camber angle, with the maximum value appearing in L 3. The screw length and head camber angle of the nail in group B were significantly greater than those in groups A and C ( P<0.05); the head inclination angle in groups A, B, and C was gradually increased, showing significant differences ( P<0.05); there was no significant difference in the average HU value of ROI between the 3 groups ( P>0.05). In plan A, 74.48% (143/192) screws had a horizontal distance of -2 to 4 mm from point F, a vertical distance of 6-14 mm from point F, a head inclination angle of (14.64±2.77)°, and a head camber angle of (6.55±2.09)°, respectively; in plan B, 84.58% (203/240) screws had a horizontal distance of 1-6 mm from point F, a vertical distance of 1-5 mm from point F, a head inclination angle of (26.93±2.21)°, and a head camber angle of (10.29±2.46)°, respectively; in plan C, 85.94% (165/192) screws had a horizontal distance of -2 to 3 mm from point F, a vertical distance of -2 to 4 mm from point F, a head inclination angle of (33.50±3.69)°, and a head camber angle of (6.47±2.48)°, respectively. CONCLUSION: Plan B should be selected as the starting point of the L 1-L 5 CBT implant. It is located at the intersection of the lowest horizontal line of the transverse process root and the lateral edge of the lumbar isthmus, which is 1-6 mm horizontally inward, 1-5 mm vertically upward, with a head inclination angle of (26.93±2.21)°, and a head camber angle of (10.29±2.46)°, respectively.

Beyond CoOx: a versatile amorphous cobalt species as an efficient cocatalyst for visible-light-driven photocatalytic water oxidation.

Cocatalysts play an important role in converting solar energy into chemical energy for photocatalytic water splitting. Herein, a versatile and efficient cocatalyst based on amorphous Co species (a-Co-E) is synthesized through thermal treatment of a Co-ethylene diamine tetraacetic acid complex in air at 300 °C. Various Bi-based semiconductors loaded with the a-Co-E cocatalyst exhibit an impressively higher photocatalytic O2 evolution rate than their CoOx-loaded counterparts.

Biomechanical comparison of percutaneous posterior endoscopic cervical discectomy and anterior cervical decompression and fusion on the treatment of cervical spondylotic radiculopathy.

BACKGROUND: Cervical spondylotic radiculopathy is a common spinal disease. The traditional surgical treatment consists of anterior cervical decompression and fusion (ACDF), but it presents problems such as trauma and fusion complications. Percutaneous posterior endoscopic cervical discectomy (PPECD) is a new minimally invasive technology that has produced good clinical outcome, but further biomechanical comparisons are needed to guide the clinical work. The goal of this study was to compare the biomechanical characteristics of the two methods by finite element analysis. METHOD: On the basis of the computed tomography scanning data of five cases of cervical spondylosis after PPECD surgery, five cases after ACDF surgery, and five non-surgical patients, software (Mimics 15.0, HyperMesh 12.0, and Abaqus 6.13) was adopted to establish a C1-C7 segment 3D finite element model. We also applied 50 N vertical load on the C1 surface and 1.5 Nm torque, simulated the anteflexion, rear protraction, and left and right lateral flexion and rotation, and observed the stability, stress distribution, and Cobb angular change of the surgical section of the cervical vertebra under different working conditions. RESULT: The postoperative model under different working conditions demonstrated poorer stability than the non-surgical group, but the stability of the PPECD group was close to that of the non-surgical group. The stability of the ACDF group was the worst, especially when making lateral bending and posterior extension. The ACDF group also showed significant differences. The PPECD group showed uniform stress distribution, whereas the ACDF group was under large stress, which was primarily concentrated in the internal fixation system. In addition, the implant showed the potential for fracture. The Cobb angle of surgery section of the PPECD group was smaller than that of the ACDF group, and the stability of the section was good. CONCLUSION: From the perspective of finite element analysis, the cervical vertebrae after PPECD treatment showed good biomechanical performance and stability.

Myeloid-derived suppressor cells depletion may cause pregnancy loss via upregulating the cytotoxicity of decidual natural killer cells.

PROBLEM: Maternal immune system tolerance to the semiallogeneic fetus is critical for a successful pregnancy. Studies have shown that myeloid-derived suppressor cells (MDSCs) play an important role in maintaining feto-maternal tolerance. However, the mechanisms remain poorly understood. METHODS: Flow cytometry was used to evaluate the percentage of MDSCs in an allogeneic-normal-pregnant mouse model during different periods of gestation. We further assessed the percentage of MDSCs and their subtypes (granulocytic MDSCs [GR-MDSCs] and monocytic MDSCs [MO-MDSCs]) in a spontaneous abortion mouse model. The levels of the immunosuppressive molecules ARG-1, iNOS, IL-10, and TGF-ß in MDSCs were also evaluated. MDSCs were depleted by anti-Gr-1 injection, and the resorption rate was calculated. The cytotoxicity of decidual natural killer (NK) cells was evaluated, and the percentage of regulatory NK (NKreg) cells and regulatory T lymphocytes (Tregs) were evaluated. RESULTS: Myeloid-derived suppressor cells was accumulated in a time-dependent manner during pregnancy. However, the percentage of MDSCs was decreased in the spontaneous abortion mice compared with that in the control mice. In addition, the levels of ARG-1, iNOS, IL-10, and TGF-ß in MDSCs decreased differentially. Finally, depletion of MDSCs was associated with increased rates of resorption and the proportion of NKreg and Treg cells in uterine tissues; meanwhile, the cytotoxicity of decidual NK cells was upregulated by increasing the level of perforin, granzyme B, and natural killer group protein 2 D-activating NK receptor (NKG2D). CONCLUSION: Depletion of MDSCs may cause pregnancy loss, while upregulating the cytotoxicity of decidual NK cells and increasing NKreg and Treg cell numbers.

Differential gene expression profile in monocytic myeloid-derived suppressor cells at maternal-fetal interface in a mouse model of spontaneous abortion.

ABSTRACTBACKGROUND: Monocytic myeloid-derived suppressor cells (MO-MDSCs) play an important role in maintaining normal pregnancy. However, it is still not clear what kind of changes in MO-MDSCs may lead to miscarriage, and which gene expression changes take place when MO-MDSCs migrate to the uterus as bone marrow-derived cells. METHODS: We used flow sorting technology to obtain MO-MDSCs from the maternal-fetal interface and bone marrow, respectively. Affymetrix 3'IVT expression profiling chip technology was used to detect the differential gene expression profiles in MO-MDSCs at the maternal-fetal interface in a mouse model of spontaneous abortion compared with the normal fertility control mice. We also compared the differential gene expression of MO-MDSCs at the maternal-fetal interface compared with bone marrow in the normal fertility control mice. RESULTS: We found that 3,409 genes in MO-MDSCs were upregulated and 1,539 genes were downregulated at the maternal-fetal interface in the spontaneous abortion mice compared with the normal fertility mice. These genes are enriched in cellular components, biological processes, molecular functions, and protein binding, tumor signaling pathway, the PI3K-Akt signaling pathway, intratumoral proteoglycans, and extracellular matrix receptor interactions. Furthermore, we found that 270 genes in MO-MDSCs were upregulated and 383 genes were downregulated at the maternal-fetal interface in the normal fertility mice compared with those in the bone marrow. These genes are enriched in cellular components, biological processes, molecular functions, cell cycle, tumor transcriptional disorder, and cell adhesion molecules. CONCLUSION: Differential gene expression in MO-MDSCs likely contributes to a successful pregnancy in fetal-maternal immunotolerance.

XCL1-XCR1 pathway promotes trophoblast invasion at maternal-fetal interface by inducing MMP-2/MMP-9 activity.

PROBLEM: Certain chemokines with their receptors can promote or inhibit trophoblast cell migration and invasion in human first-trimester placenta. Whether the lymphotactin (Lptn; XCL1)-XC chemokine receptor 1 (XCR1) chemokine pathway affects trophoblast cell migration and invasion in human first-trimester placenta remains unclear. METHOD OF STUDY: The expression pattern of chemokine XCL1 and its receptor XCR1 was detected in human first-trimester by qRT-PCR, and the effect of recombinant human XCL1 (rhXCL1) on trophoblast cell function was tested by wound healing and Transwell assays. Matrix metalloproteinase (MMP) activity in trophoblast cells treated with rhXCL1 was assessed via qRT-PCR and gelatin zymography. RESULTS: Abundant XCR1 mRNA was expressed in the first-trimester decidua and villi. XCL1 and XCR1 mRNA were expressed at a higher level in the first-trimester than in the term placenta. RhXCL1 promoted trophoblast cell migration and invasion by increasing MMP-9 and MMP-2 activity and that of the MMP-2/tissue inhibitor of metalloproteinases 2 (TIMP-2) complex via the phosphatidylinositol 3-kinase (PI3K)/AKT kinase (AKT), mitogen-activated protein kinase (MEK), and JUN N-terminal kinase (JNK) signaling pathways. CONCLUSION: XCL1-XCR1 chemokine pathway promotes trophoblast invasion by increasing matrix metalloproteinase activity in human first-trimester placenta.

One-Step Solvothermal Synthesis of Petalous Carbon-Coated Cu+-Doped CdS Nanocomposites with Enhanced Photocatalytic Hydrogen Production.

Metal ion doping and nanocoating a CdS photocatalyst have been proven to be effective strategies to inhibit photocorrosion and improve photocatalytic performance. In this study, carbon-coated Cu+-doped CdS nanocomposites (C-Cu-CdS) with a stable petalous structure and highly uniform size distribution were successfully synthesized via a facile one-step solvothermal method. Both Cu+ doping and carbon coating to the CdS photocatalyst are realized in this one-step strategy. Benefiting from the unique core-shell structure and metal ion doping, the as-prepared C-Cu-CdS catalyst exhibits significantly enhanced photostability and visible-light-driven photocatalytic efficiency. For an optimal Cu+ doping percentage of 1.0%, an average hydrogen production rate of 2796 µmol h-1 g-1 and an apparent quantum efficiency of 16.0% at a wavelength of 420 nm was observed, the latter of which is nearly 9.3 times higher than that of the carbon-coated CdS product without Cu+ doping. The origin of the improved photocatalytic activity is systematically investigated by examining the effects of Cu+ doping.

[Imaging and biomechanics researches of reconstructing lumbosacral stability after L 5 vertebrectomy via anterolateral approach].

Objective: To investigate the feasibility of anterolateral approach for L 5 vertebral resection, bone grafting, and screw rod fixation by imaging and biomechanics researches. Methods: Twenty formalized adult cadavers (12 males and 8 females) were randomly divided into 2 groups; L 5 vertebral resection, bone graft, and screw rod fixation was performed on 10 specimens by using anterolateral approach (experimental group), and on the other 10 specimens by combined anterior and posterior approach. CT scanning and three-dimensional reconstruction were performed in the experimental group; preoperative maximal safe entry angle and depth of screws and intraoperative actual entry angle and depth of screws were measured; the sacral screw position was observed after operation. The biomechanical test was done in 2 groups. Results: Twenty specimens smoothly underwent L 5 excision and reconstruction. CT scan showed that there was no significant difference in maximal safe entry angle and depth of screws between males and females in experimental group before operation ( P>0.05); the maximal safe entry angle and depth were 51.93° and 47.88 mm for anterior screw, and were 37.04° and 46.28 mm for posterior screw. After operation, depth of the sacral anterior and posterior screws were appropriate, which did not pierce into the spinal canal. The biomechanical test results indicated that the flexion, extension, and lateral flexion displacements, and vertical compression stiffness showed no significant difference between 2 groups ( P>0.05). Conclusion: For L 5 lesions not invading posterior column, to use L 5 vertebral resection, bone graft, and screw rod fixation by anterolateral approach is a safe and feasible method to reconstruct lumbosacral stability, with the advantages of no changing posture, less operation time and incision, and prevention of bone graft shift, but effectiveness need further be identified.

Characterization of T follicular helper cells in allogeneic normal pregnancy and PDL1 blockage-induced abortion.

A deeper understanding of the immunological events during pregnancy will provide novel insights into the pathogenesis of pregnancy complications. The fundamental function of T follicular helper (Tfh) cells is to provide cognate help to B cells. Dysregulations of Tfh-cell function and/or development can result in various immunological diseases. However, the role and characteristics of Tfh cells during pregnancy remain unknown. Herein, an allogeneic-normal-pregnant mouse model was used, and we found that the CD4+ T cells residing at the uterus and placenta (UP) displayed a Tfh-like phenotype; and the UP-derived CD4+CXCR5hiPD-1hi and CD4+CXCR5hiICOShi Tfh cells, which showed a memory/activation phenotype, reached their peak at mid-pregnancy. These Tfh cells were located abundantly in the uterus at mid-pregnancy, but greatly increased in the placenta at late-pregnancy. Furthermore, increased foetal resorption by PDL1 blockade correlated with enhanced accumulation of Tfh cells and upregulated expressions of ICOS and PD-1 on these cells. Collectively, our findings are the first to indicate that an adequate and balanced accumulation of Tfh cells during gestation is likely to help maintaining a successful pregnancy, whereas an excessively high level of these cells could lead to abortion.

[Observation of lumbar zygapophyseal joints adjacent arterials by anatomy and DSA].

OBJECTIVE: To investigate the arterials adjacent to the lumbar zygapophyseal joints by anatomy and DSA and aimed to provide a safe operation way for the lumbar back and posterolateral surgery by reducing operative hemorrhage in clinical treatment. METHODS: We selected 20 adult corpse lumbar departments and discovered the lumbar lateral artery and lumbar transverse process artery. Using anatomical microscope to observe the lumber transverse process artery and dosal artery of 1-4 lumber arteries from the lumbar spine 1/2-4/5. We also selected 20 patients without lumbar disease and used DSA to research their lumbar arteries and the starting, mutation or branch line of other artery sources in vivo. RESULTS: The anatomy and DSA results showed that the original location of dorsal branch usually at the anterosuperior of L1/2-4/5 foramen intervertebrale outlet area, then distributed to the outside and backside of ZJ. Anterior branch of transverse process sent out and branch into ascending and descending muscle branch. The ascending branch distributed to the below root of upper ZJ and sent out zygapophyseal branches which were distributing to the back of ZJ. The descending branch distributed to the upper root of below ZJ and sent out several muscle branches which were going into muscles in the front. And there were no statistically significant difference between left and right in the body. CONCLUSIONS: The routes of arteries adjacent to ZJ and the relationship between them showed obvious regularity. Mastering its anatomical characteristics could effectively reduce the posterior surgical bleeding, make the operation easier, reduce the important tissue damage and then avoided the postoperative hematoma complications.