Significant enhancement of proton conductivity in solid acid at the monolayer limit.

Proton transport in nanofluidic channels is not only fundamentally important but also essential for energy applications. Although various strategies have been developed to improve the concentration of active protons in the nanochannels, it remains challenging to achieve a proton conductivity higher than that of Nafion, the benchmark for proton conductors. Here, taking H3Sb3P2O14 and HSbP2O8 as examples, we show that the interactions between protons and the layer frameworks in layered solid acid HnMnZ2O3n+5 are substantially reduced at the monolayer limit, which significantly increases the number of active protons and consequently improves the proton conductivities by ∼8 ‒ 66 times depending on the humidity. The membranes assembled by monolayer H3Sb3P2O14 and HSbP2O8 nanosheets exhibit in-plane proton conductivities of ~ 1.02 and 1.18 S cm-1 at 100% relative humidity and 90 °C, respectively, which are over 5 times higher than the conductivity of Nafion. This work provides a general strategy for facilitating proton transport, which will have broad implications in advancing both nanofluidic research and device applications from energy storage and conversion to neuromorphic computing.

Identifying atomically thin isolated-band channels for intrinsic steep-slope transistors by high-throughput study.

Developing low-power FETs holds significant importance in advancing logic circuits, especially as the feature size of MOSFETs approaches sub-10 nanometers. However, this has been restricted by the thermionic limitation of SS, which is limited to 60 mV per decade at room temperature. Herein, we proposed a strategy that utilizes 2D semiconductors with an isolated-band feature as channels to realize sub-thermionic SS in MOSFETs. Through high-throughput calculations, we established a guiding principle that combines the atomic structure and orbital interaction to identify their sub-thermionic transport potential. This guides us to screen 192 candidates from the 2D material database comprising 1608 systems. Additionally, the physical relationship between the sub-thermionic transport performances and electronic structures is further revealed, which enables us to predict 15 systems with promising device performances for low-power applications with supply voltage below 0.5 V. This work opens a new way for the low-power electronics based on 2D materials and would inspire extensive interests in the experimental exploration of intrinsic steep-slope MOSFETs.

Unveiling HSP40/60/70/90/100 gene families and abiotic stress response in Jerusalem artichoke.

Heat shock proteins (HSPs) are essential for plant growth, development, and stress adaptation. However, their roles in Jerusalem artichoke are largely unexplored. Using bioinformatics, we classified 143 HSP genes into distinct families: HSP40 (82 genes), HSP60 (22 genes), HSP70 (29 genes), HSP90 (6 genes), and HSP100 (4 genes). Our analysis covered their traits, evolution, and structures. Using RNA-seq data, we uncovered unique expression patterns of these HSP genes across growth stages and tissues. Notably, HSP40, HSP60, HSP70, HSP90, and HSP100 families each had specific roles. We also studied how these gene families responded to various stresses, from extreme temperatures to drought and salinity, revealing intricate expression dynamics. Remarkably, HSP40 showed remarkable flexibility, while HSP60, HSP70, HSP90, and HSP100 responded specifically to stress types. Moreover, our analysis unveiled significant correlations between gene pairs under stress, implying cooperative interactions. qRT-PCR validation underscored the significance of particular genes such as HtHSP60-7, HtHSP90-5, HtHSP100-2, and HtHSP100-3 in responding to stress. In summary, our study advances the understanding of how HSP gene families collectively manage stresses in Jerusalem artichoke. This provides insights into specific gene functions and broader plant stress responses.

Valley-dimensionality locking of superconductivity in cubic phosphides.

Two-dimensional superconductivity is primarily realized in atomically thin layers through extreme exfoliation, epitaxial growth, or interfacial gating. Apart from their technical challenges, these approaches lack sufficient control over the Fermiology of superconducting systems. Here, we offer a Fermiology-engineering approach, allowing us to desirably tune the coherence length of Cooper pairs and the dimensionality of superconducting states in arsenic phosphides AsxP1-x under hydrostatic pressure. We demonstrate how this turns these compounds into tunable two-dimensional superconductors with a dome-shaped phase diagram even in the bulk limit. This peculiar behavior is shown to result from an unconventional valley-dimensionality locking mechanism, driven by a delicate competition between three-dimensional hole-type and two-dimensional electron-type energy pockets spatially separated in momentum space. The resulting dimensionality crossover is further discussed to be systematically controllable by pressure and stoichiometry tuning. Our findings pave a unique way to realize and control superconducting phases with special pairing and dimensional orders.

2D CdPS3-based versatile superionic conductors.

Ion transport in nanochannels is crucial for applications in life science, filtration, and energy storage. However, multivalent ion transport is more difficult than the monovalent analogues due to the steric effect and stronger interactions with channel walls, and the ion mobility decreases significantly as temperature decreases. Although many kinds of solid ionic conductors (SICs) have been developed, they can attain practically useful conductivities (0.01 S cm-1) only for monovalent ions above 0 °C. Here, we report a class of versatile superionic conductors, monolayer CdPS3 nanosheets-based membranes intercalated with diverse cations with a high density up to ∼2 nm-2. They exhibit unexpectedly similar superhigh ion conductivities for monovalent (K+, Na+, Li+) and multivalent ions (Ca2+, Mg2+, Al3+), ∼0.01 to 0.8 S cm-1 in the temperature range of -30 ‒ 90 °C, which are one to two orders of magnitude higher than those of the corresponding best SICs. We reveal that the high conductivity originates from the concerted movement of high-density cations in the well-ordered nanochannels with high mobility and low energy barrier. Our work opens an avenue for designing superionic conductors that can conduct various cations and provides possibilities for discovering unusual nanofluidic phenomena in nanocapillaries.

Defects boost graphitization for highly conductive graphene films.

Fabricating highly crystalline macroscopic films with extraordinary electrical and thermal conductivities from graphene sheets is essential for applications in electronics, telecommunications and thermal management. High-temperature graphitization is the only method known to date for the crystallization of all types of carbon materials, where defects are gradually removed with increasing temperature. However, when using graphene materials as precursors, including graphene oxide, reduced graphene oxide and pristine graphene, even lengthy graphitization at 3000°C can only produce graphene films with small grain sizes and abundant structural disorders, which limit their conductivities. Here, we show that high-temperature defects substantially accelerate the grain growth and ordering of graphene films during graphitization, enabling ideal AB stacking as well as a 100-fold, 64-fold and 28-fold improvement in grain size, electrical conductivity and thermal conductivity, respectively, between 2000°C and 3000°C. This process is realized by nitrogen doping, which retards the lattice restoration of defective graphene, retaining abundant defects such as vacancies, dislocations and grain boundaries in graphene films at a high temperature. With this approach, a highly ordered crystalline graphene film similar to highly oriented pyrolytic graphite is fabricated, with electrical and thermal conductivities (∼2.0 × 104 S cm-1; ∼1.7 × 103 W m-1 K-1) that are improved by about 6- and 2-fold, respectively, compared to those of the graphene films fabricated by graphene oxide. Such graphene film also exhibits a superhigh electromagnetic interference shielding effectiveness of ∼90 dB at a thickness of 10 µm, outperforming all the synthetic materials of comparable thickness including MXene films. This work not only paves the way for the technological application of highly conductive graphene films but also provides a general strategy to efficiently improve the synthesis and properties of other carbon materials such as graphene fibers, carbon nanotube fibers, carbon fibers, polymer-derived graphite and highly oriented pyrolytic graphite.

Carrier Transport Regulation of Pixel Graphene Transparent Electrodes for Active-Matrix Organic Light-Emitting Diode Display.

Integrating a graphene transparent electrode (TE) matrix with driving circuits is essential for the practical use of graphene in optoelectronics such as active-matrix organic light-emitting diode (OLED) display, however it is disabled by the transport of carriers between graphene pixels after deposition of a semiconductor functional layer caused by the atomic thickness of graphene. Here, the carrier transport regulation of a graphene TE matrix by using an insulating polyethyleneimine (PEIE) layer is reported. The PEIE forms an ultrathin uniform film (≤10 nm) to fill the gap of the graphene matrix, blocking horizontal electron transport between graphene pixels. Meanwhile, it can reduce the work function of graphene, improving the vertical electron injection through electron tunneling. This enables the fabrication of inverted OLED pixels with record high current and power efficiencies of 90.7 cd A-1 and 89.1 lm W-1 , respectively. By integrating these inverted OLED pixels with a carbon nanotube-based thin-film transistor (CNT-TFT)-driven circuit, an inch-size flexible active-matrix OLED display is demonstrated, in which all OLED pixels are independently controlled by CNT-TFTs. This research paves a way for the application of graphene-like atomically thin TE pixels in flexible optoelectronics such as displays, smart wearables, and free-form surface lighting.

A corrosion-resistant RuMoNi catalyst for efficient and long-lasting seawater oxidation and anion exchange membrane electrolyzer.

Direct seawater electrolysis is promising for sustainable hydrogen gas (H2) production. However, the chloride ions in seawater lead to side reactions and corrosion, which result in a low efficiency and poor stability of the electrocatalyst and hinder the use of seawater electrolysis technology. Here we report a corrosion-resistant RuMoNi electrocatalyst, in which the in situ-formed molybdate ions on its surface repel chloride ions. The electrocatalyst works stably for over 3000 h at a high current density of 500 mA cm-2 in alkaline seawater electrolytes. Using the RuMoNi catalyst in an anion exchange membrane electrolyzer, we report an energy conversion efficiency of 77.9% and a current density of 1000 mA cm-2 at 1.72 V. The calculated price per gallon of gasoline equivalent (GGE) of the H2 produced is $ 0.85, which is lower than the 2026 technical target of $ 2.0/GGE set by the United Stated Department of Energy, thus, suggesting practicability of the technology.

Superhigh and Robust Ion Selectivity in Membranes Assembled with Monolayer Clay Nanosheets.

It is crucial to control the ion transport in membranes for various technological applications such as energy storage and conversion. The emerging functional two-dimensional (2D) nanosheets such as graphene oxide and MXenes show great potential for constructing ordered nanochannels, but the assembled membranes suffer from low ion selectivity and stability. Here a class of robust charge-selective membranes with superhigh cation/anion selectivity, which are assembled with monolayer nanosheets of cationic/anionic clays that inherently have permanent and uniform charges on each layer is reported. The transport number of cations/anions of cationic vermiculite nanosheet membranes (VNMs)/anionic Co-Al layered double hydroxide (CoAl-LDH) nanosheet membranes is over 0.90 in different NaCl concentration gradients, outperforming all the reported ion-selective membranes. Importantly, this excellent ion selectivity can persist at high-concentration salt solutions, under acidic and alkaline conditions, and for a wide range of ions of different sizes and charges. By coupling a pair of cation-selective vermiculite membrane and anion-selective CoAl-LDH membrane, a reverse electrodialysis device which shows an output power density of 0.7 W m-2 and energy conversion efficiency of 45.5% is constructed. This work provides a new strategy to rationally design high-performance ion-selective membranes by using 2D nanosheets with inherent surface charges for controllable ion-transport applications.

Grain Size Engineering of CVD-Grown Large-Area Graphene Films.

Graphene, a single atomic layer of graphitic carbon, has attracted much attention because of its outstanding properties hold great promise for a wide range of technological applications. Large-area graphene films (GFs) grown by chemical vapor deposition (CVD) are highly desirable for both investigating their intrinsic properties and realizing their practical applications. However, the presence of grain boundaries (GBs) has significant impacts on their properties and related applications. According to the different grain sizes, GFs can be divided into polycrystalline, single-crystal, and nanocrystalline films. In the past decade, considerable progress has been made in engineering the grain sizes of GFs by modifying the CVD processes or developing some new growth approaches. The key strategies involve controlling the nucleation density, growth rate, and grain orientation. This review aims to provide a comprehensive description of grain size engineering research of GFs. The main strategies and underlying growth mechanisms of CVD-grown large-area GFs with nanocrystalline, polycrystalline, and single-crystal structures are summarized, in which the advantages and limitations are highlighted. In addition, the scaling law of physical properties in electricity, mechanics, and thermology as a function of grain sizes are briefly discussed. Finally, the perspectives for challenges and future development in this area are also presented.

Growing Nanocrystalline Graphene on Aggregates for Conductive and Strong Smart Cement Composites.

Highly conductive concrete/mortar has been long pursued to realize structural health monitoring in the development of smart-cement-based facilities. However, it remains challenging to significantly increase the electrical conductivity of concrete/mortar without lowering the compressive strength and flowability. Here, nanocrystalline-graphene-coated aggregates (termed Gr@AGs) are synthesized to break this conductivity-strength tradeoff. Admixing Gr@AGs with cement enables the construction of a conductive network of graphene that simultaneously strengthens the interfacial transition zone between aggregates and paste. As a result, high conductivity and improved mechanical properties have been simultaneously realized in Gr@AGs-based smart mortars. The significant positive effects of Gr@AGs are further enhanced by combining them with a low percentage of carbon fiber. Typically, the 28-day compressive/flexural strength of the optimized mortar increases by 12.2%/19.4%, with the electrical resistivity reduced by over 3 orders of magnitude from ∼4.6 × 105 to 182 Ω cm. On this basis, we demonstrate high-sensitivity cement-based piezoresistive sensors with a fractional change in resistivity as high as ∼25%, which is more than 1 order of magnitude higher than those reported in comparable systems. This study provides a solution to the critical issues in developing smart cementitious composites by taking full advantage of graphene's properties.

Grain-Boundary-Induced Ultrasensitive Molecular Detection of Graphene Film.

Graphene has been considered a promising platform for molecular detection due to the graphene-enhanced Raman scattering (GERS) effect. However, the GERS performance of pristine graphene is limited by a low chemically active surface and insufficient density of states (DOS). Although diverse defects have been introduced, it remains a great challenge to improve the enhancement performance. Here, we show that graphene grain boundaries (GBs) possess stronger adsorption capacity and more abundant DOS. Thus, GERS performance increases with the atomic percentage of GBs, which makes nanocrystalline graphene (NG) film a superior GERS substrate. For R6G as a probe molecule, a low detection limit of 3 × 10-10 M was achieved. Utilizing the high chemical activity of GBs, we also fabricated NG film decorated with Au particles using a one-step quenching strategy, and this hybrid film exhibits an extremely low limit of detection down to 5 × 10-11 M, outperforming all the reported graphene-based systems.

Black Arsenic-Phosphorus Nanosheets for Highly Responsive Photodetection and Dual-Wavelength Ultrafast Pulse Generation at Telecommunication Bands.

Black arsenic-phosphorus (b-AsP), an alloy containing black phosphorus and arsenic in the form of b-AsxP1-x, has a broadly tunable band gap changing with the chemical ratios of As and P. Although mid-infrared photodetectors and mode-locked or Q-switched pulse lasers based on b-AsP (mostly b-As0.83P0.17) are investigated, the potential of this family of materials for near-infrared photonic and optoelectronic applications at telecommunication bands is not fully explored. Here, we have verified a multifunctional fiber device based on b-As0.4P0.6 nanosheets for highly responsive photodetection and dual-wavelength ultrafast pulse generation at around 1550 nm. The fiber laser with a saturable absorber (SA) based on b-As0.4P0.6 nanosheets can output dual-wavelength mode-locking pulses with a larger bandwidth and spectral separation than those based on other two-dimensional (2D) materials. Remarkably, it is found that the b-As0.4P0.6-based photodetector can achieve a high responsivity of 10,200 A/W at 1550 nm and a peak responsivity of 2.29 × 105 A/W at 980 nm. Our work suggests that b-As0.4P0.6 shows great potential in ultrafast photonics, dual-comb spectroscopy, and infrared signal detection.

A polymer electrolyte design enables ultralow-work-function electrode for high-performance optoelectronics.

Ambient solution-processed conductive materials with a sufficient low work function are essential to facilitate electron injection in electronic and optoelectronic devices but are challenging. Here, we design an electrically conducting and ambient-stable polymer electrolyte with an ultralow work function down to 2.2 eV, which arises from heavy n-doping of dissolved salts to polymer matrix. Such materials can be solution processed into uniform and smooth films on various conductors including graphene, conductive metal oxides, conducting polymers and metals to substantially improve their electron injection, enabling high-performance blue light-emitting diodes and transparent light-emitting diodes. This work provides a universal strategy to design a wide range of stable charge injection materials with tunable work function. As an example, we also synthesize a high-work-function polymer electrolyte material for high-performance solar cells.

Engineering Graphene Grain Boundaries for Plasmonic Multi-Excitation and Hotspots.

Surface plasmons, merging photonics and electronics in nanoscale dimensions, have been the cornerstones in integrated informatics, precision detection, high-resolution imaging, and energy conversion. Arising from the exceptional Fermi-Dirac tunability, ultrafast carrier mobility, and high-field confinement, graphene offers excellent advantages for plasmon technologies and enables a variety of state-of-the-art optoelectronic applications ranging from tight-field-enhanced light sources, modulators, and photodetectors to biochemical sensors. However, it is challenging to co-excite multiple graphene plasmons on one single graphene sheet with high density, a key step toward plasmonic wavelength-division multiplexing and next-generation dynamical optoelectronics. Here, we report the heteroepitaxial growth of a polycrystalline graphene monolayer with patterned gradient grain boundary density, which is synthesized by creating diverse nanosized local growth environments on a centimeter-scale substrate with a polycrystalline graphene ring seed in chemical vapor deposition. Such geometry enables plasmonic co-excitation with varied wavelength diversification in the nanoscale. Via using high-resolution scanning near-field optical microscopy, we demonstrate rich plasmon standing waves, even bright plasmonic hotspots with a size up to 3 µm. Moreover, by changing the grain boundary density and annealing, we find the local plasmonic wavelengths are widely tunable, from 70 to 300 nm. Theoretical modeling supports that such plasmonic versatility is due to the grain boundary-induced plasmon-phonon interactions through random phase approximation. The seed-induced heteroepitaxial growth provides a promising way for the grain boundary engineering of two-dimensional materials, and the controllable grain boundary-based plasmon co-generation and manipulation in one single graphene monolayer will facilitate the applications of graphene for plasmonics and nanophotonics.

Resonant Scattering in Proximity-Coupled Graphene/Superconducting Mo2 C Heterostructures.

The realization of high-quality heterostructures or hybrids of graphene and superconductor is crucial for exploring various novel quantum phenomena and devices engineering. Here, the electronic transport on directly grown high-quality graphene/Mo2 C vertical heterostructures with clean and sharp interface is comprehensively investigated. Owing to the strong interface coupling, the graphene layer feels an effective confinement potential well imposed by two-dimensional (2D) Mo2 C crystal. Employing cross junction device geometry, a series of resonance-like magnetoresistance peaks are observed at low temperatures. The temperature and gate voltage dependences of the observed resonance peaks give evidence for geometric resonance of electron cyclotron orbits with the formed potential well. Moreover, it is found that both the amplitude of resonance peaks and conductance fluctuation exhibit different temperature-dependent behaviors below the superconducting transition temperature of 2D Mo2 C, indicating the correlation of quantum fluctuations and superconductivity. This study offers a promising route toward integrating graphene with 2D superconducting materials, and establishes a new way to investigate the interplay of massless Dirac fermion and superconductivity based on graphene/2D superconductor vertical heterostructures.

Ultrafast growth of submillimeter-scale single-crystal MoSe2 by pre-alloying CVD.

The synthesis of large-scale monolayer single-crystal MX2 (M = Mo, W; X = S, Se), a typical transition metal dichalcogenide (TMD), is the premise for their future applications. Compared with insulating substrates such as SiO2 and sapphire, Au is more favourable for the fast growth of TMDs by chemical vapor deposition (CVD). Recently, large-scale single-crystal WX2 was successfully grown and transferred on Au. In sharp contrast, the growth and transfer for monolayer MoX2 is still very challenging, because Au has a higher solubility of Mo and stronger interaction with MoX2 than WX2. Compared with the most studied MoS2, MoSe2 is superior in many aspects because of the narrower band gap and tunable excitonic charging effects. However, the synthesis of large-scale single-crystal MoSe2 on Au has not been reported so far. Here, a pre-alloying CVD method was developed to solve the problems for the growth and non-destructive transfer of MoX2. It has realized the ultrafast growth (30 s) of submillimeter-scale (560 µm) single-crystal MoSe2 for the first time. As-grown samples are strictly monolayers with good optical and electrical properties, which can be easily transferred without sacrificing Au foils by the electrochemical bubbling method. It was found that pre-alloying not only passivates the energetically active sites on Au but also weakens the interaction between Au and MoSe2, which is responsible for the ultrafast growth and easy transfer of MoSe2. This method is also universal for the fast growth and non-destructive transfer of other 2D TMDs.

Fabrication of Large-Area Uniform Nanometer-Thick Functional Layers and Their Stacks for Flexible Quantum Dot Light-Emitting Diodes.

Large-area fabrication and stacking of various nanometer-thick functional layers from solutions is essentially important for the construction of flexible thin-film optoelectronic devices, but very challenging. The existing fabrication methods suffer from either non-uniformity caused by the coffee-ring effect or serious solution waste (excess of 90% for spin coating), and are hard to scale up and create stacks. Here, it is shown that centrifugal casting is a universal, scalable, and efficient method to fabricate uniform nanometer-thick films and their stacks of various materials. The coffee-ring effect is effectively suppressed, the solution utilization ratio is higher than ≈61%, and the films/stacks show a smooth surface/high-quality interface. Using this method, flexible quantum dot light-emitting diode displays with uniform luminance in a large lighting area of ≈115 cm2 that have not been achieved even on rigid substrates by the existing methods, are realized. This efficient and low-cost solution processing method paves a way for large-area fabrication of various flexible thin-film optoelectronic devices.

Nonlinear electrohydrodynamic ion transport in graphene nanopores.

Mechanosensitivity is one of the essential functionalities of biological ion channels. Synthesizing an artificial nanofluidic system to mimic such sensations will not only improve our understanding of these fluidic systems but also inspire applications. In contrast to the electrohydrodynamic ion transport in long nanoslits and nanotubes, coupling hydrodynamical and ion transport at the single-atom thickness remains challenging. Here, we report the pressure-modulated ion conduction in graphene nanopores featuring nonlinear electrohydrodynamic coupling. Increase of ionic conductance, ranging from a few percent to 204.5% induced by the pressure­an effect that was not predicted by the classical linear coupling of molecular streaming to voltage-driven ion transport­was observed experimentally. Computational and theoretical studies reveal that the pressure sensitivity of graphene nanopores arises from the transport of capacitively accumulated ions near the graphene surface. Our findings may help understand the electrohydrodynamic ion transport in nanopores and offer a new ion transport controlling methodology.

Electrochemically derived nanographene oxide activates endothelial tip cells and promotes angiogenesis by binding endogenous lysophosphatidic acid.

Graphene oxide (GO) exhibits good mechanical and physicochemical characteristics and has extensive application prospects in bone tissue engineering. However, its effect on angiogenesis is unclear, and its potential toxic effects are heavily disputed. Herein, we found that nanographene oxide (NGO) synthesized by one-step water electrolytic oxidation is smaller and shows superior biocompatibility. Moreover, NGO significantly enhanced angiogenesis in calvarial bone defect areas in vivo, providing a good microenvironment for bone regeneration. Endothelial tip cell differentiation is an important step in the initiation of angiogenesis. We verified that NGO activates endothelial tip cells by coupling with lysophosphatidic acid (LPA) in serum via strong hydrogen bonding interactions, which has not been reported. In addition, the mechanism by which NGO promotes angiogenesis was systematically studied. NGO-coupled LPA activates LPAR6 and facilitates the formation of migratory tip cells via Hippo/Yes-associated protein (YAP) independent of reactive oxygen species (ROS) stimulation or additional complex modifications. These results provide an effective strategy for the application of electrochemically derived NGO and more insight into NGO-mediated angiogenesis.