Guided tooth autotransplantation in edentulous areas post-orthodontic treatment.

OBJECTIVE: Tooth autotransplantation with a complete root formation to replace one or more lost teeth is indicated as a cost-effective alternative to implants. The aim of this case report was to describe a successfully guided autotransplantation of a maxillary third molar with fully formed roots into a surgically created socket after orthodontic space opening. CLINICAL CONSIDERATIONS: A guided autotransplantation of the maxillary left third molar into the missing maxillary left first molar site was chosen. After virtually orientating donor tooth to confirm its optimum fit, it was deemed necessary to open 4 mm the mesiodistal space. Following the orthodontic movement, a 3-dimensional (3D)-guiding template and a milled surgical guide were manufactured to allow the donor tooth to be transplanted exactly in the planned position. The 2-year follow-up periapical radiograph showed a continuous periodontal space with no signs of apical periodontitis or root resorption. CONCLUSIONS: Virtual planning and 3D-printed tooth replica combined with guided surgery can simplify the autotransplantation technique for both the clinician and the patient, particularly when the socket has been completely created during surgery. CLINICAL SIGNIFICANCE: Virtual digital planning, which can accurately calculate the exact space to open orthodontically before an autotransplantation, could prove essential to enhancing the precision of 3D placement of the donor tooth in the recipient site.

Outcome of Autotransplantation of Mature Third Molars Using 3-dimensional-printed Guiding Templates and Donor Tooth Replicas.

Autotransplantation exhibits a number of advantages compared with other treatment options (ie, dental implants or fixed partial prostheses), such as greater resistance to occlusal loading, maintenance of the periodontal ligament and surrounding bone, and the potential for better esthetics. The aim of this study was to determine clinical outcomes for autotransplanted teeth with complete root formation using 3-dimensional-printed guiding templates and tooth replicas. Twenty-seven third molars with completely formed roots were autotransplanted. Each donor tooth and recipient site were examined clinically and radiographically (periapical radiographs). A selective cone-beam computed tomographic scan was taken of each donor tooth and recipient site. The images of the selected donor teeth were segmented and saved as stereolithography files. Similar to virtual planning of dental implants, correct angulation, rotation, and accurate positioning of the donor teeth were predefined using the stereolithography files. According to the virtually defined positions and dimensions of the donor teeth, 3-dimensional guiding templates and donor tooth replicas were printed. All autotransplantations were performed according to 1 treatment protocol and surgical technique. In 22 of the 24 transplanted teeth, no inflammation occurred during the healing period. At 2 years, no pathologic radiolucency or tooth resorption was observed in the 22 donor teeth. The autotransplanted teeth fulfilled the success criteria in 22 cases for a 91.7% success rate. Digital planning could potentially provide an accurate alternative to current autotransplantation techniques.

Circadian variation of melatonin, light exposure, and diurnal preference in day and night shift workers of both sexes.

BACKGROUND: Light-at-night has been shown in experimental studies to disrupt melatonin production but this has only partly been confirmed in studies of night shift workers. In this cross-sectional study, we examined the circadian variation of melatonin in relation to shift status, individual levels of light-at-night exposure, and diurnal preference, an attribute reflecting personal preference for activity in the morning or evening. METHODS: One hundred and seventeen workers (75 night and 42 day) of both sexes, ages 22 to 64 years, were recruited from four companies. Participants collected urine samples from all voids over 24 hours and wore a data logger continuously recording their light exposure. Sociodemographic, occupational, lifestyle, and diurnal preference information were collected by interview. Concentrations of urinary 6-sulfatoxymelatonin (aMT6s), the main melatonin metabolite, were measured. RESULTS: Mean aMT6s levels were lower in night [10.9 ng/mg creatinine/hour; 95% confidence interval (CI), 9.5-12.6] compared with day workers (15.4; 95% CI, 12.3-19.3). The lowest aMT6s levels were observed in night workers with morning preference (6.4; 95% CI, 3.0-13.6). Peak time of aMT6s production occurred 3 hours later in night (08:42 hour, 95% CI, 07:48-09:42) compared with day workers (05:36 hour, 95% CI, 05:06-06:12). Phase delay was stronger among subjects with higher light-at-night exposure and number of nights worked. CONCLUSIONS: Night shift workers had lower levels and a delay in peak time of aMT6s production over a 24-hour period. Differences were modified by diurnal preference and intensity of light-at-night exposure. IMPACT: Night shift work affects levels and timing of melatonin production and both parameters may relate to future cancer risk.

Novel Chlamydiales strains isolated from a water treatment plant.

Chlamydiae are obligate intracellular bacteria infecting free-living amoebae, vertebrates and some invertebrates. Novel members are regularly discovered, and there is accumulating evidence supporting a very important diversity of chlamydiae in the environment. In this study, we investigated the presence of chlamydiae in a drinking water treatment plant. Samples were used to inoculate Acanthamoeba monolayers (Acanthamoeba co-culture), and to recover autochthonous amoebae onto non-nutritive agar. Chlamydiae were searched for by a pan-chlamydia 16S rRNA gene PCR from both Acanthamoeba co-cultures and autochthonous amoebae, and phylotypes determined by 16S rRNA gene sequencing. Autochthonous amoebae also were identified by 18S rRNA gene amplification and sequencing. From a total of 79 samples, we recovered eight chlamydial strains by Acanthamoeba co-culture, but only one of 28 amoebae harboured a chlamydia. Sequencing results and phylogenetic analysis showed our strains belonging to four distinct chlamydial lineages. Four strains, including the strain recovered within its natural host, belonged to the Parachlamydiaceae; two closely related strains belonged to the Criblamydiaceae; two distinct strains clustered with Rhabdochlamydia spp.; one strain clustered only with uncultured environmental clones. Our results confirmed the usefulness of amoeba co-culture to recover novel chlamydial strains from complex samples and demonstrated the huge diversity of chlamydiae in the environment, by identifying several new species including one representing the first strain of a new family.

Comparative study between two laser scanning cytometers and epifluorescence microscopy for the detection of Cryptosporidium oocysts in water.

BACKGROUND: Cryptosporidium detection in water and environmental samples has increased during the last years, largely due to an increase in the number of reported waterborne outbreaks of cryptosporidiosis and the implementation of new regulations about Cryptosporidium monitoring in water supplies. The aim of this study was to validate and compare the capacity of two laser scanning cytometers commercially available (LSC and ChemScanRDI), against manual microscopic enumeration of Cryptosporidium oocysts in surface water and reference material samples. METHODS: Reference material and surface water samples were analysed by two laser scanning cytometers methodologies and by manual epifluorescence microscopy. Two mAbs from commercial suppliers were used to evaluate background reduction. RESULTS: Highly significant correlations were obtain between both cytometers (R(2) = 0.99) and with manual microscopy (R(2) = 0.98), showing that oocysts counts made by cytometers were equivalent to those obtained with conventional methods. We observed a variability in oocysts counts when different antibodies where used with laser scanning cytometers and manual microscopy. CONCLUSIONS: This study showed the efficacy of the laser scanning technology (LSC and ChemScanRDI), as an automated and a more standardized alternative to manual epifluorescence microscopy examination, for Cryptosporidium detection in water samples. High quality antibodies are needed for automated enumeration as well as for manual microscope observations.

Distribution of human polyomaviruses, adenoviruses, and hepatitis E virus in the environment and in a drinking-water treatment plant.

Large numbers of viruses are excreted in human feces and urine, which even at low concentrations may cause illness when ingested. Some of these viruses have not been traditionally monitored in terms of waterborne diseases and are considered emergent viruses, such as hepatitis E virus (HEV) and JC and BK polyomavirus (JCPyV and BKPyV). The high prevalence of human adenoviruses (HAdV) and polyomaviruses, which both show DNA genomes, in sewage from widely divergent areas has suggested the relevance of evaluating these viruses as possible indicators of viral contamination. The concentration of these viruses was analyzed in sewage and river water and after treatment in a drinking-water treatment plant including chlorination, flocculation, ozonation, and granulate active carbon (GAC) filtration. Samples of GAC-filtered water were collected before a second chlorination treatment. The river used as a source of fresh water presented an average concentration of 2.6 x 10(1) JCPyV and 4 x 10(2) HAdV GC (genome copies)/L. A removal of 2 logarithms (99%) of HAdV and JCPyV was observed in the drinking-water treatment plant. All the GAC-filtered water samples studied contained HAdV, with a mean value of 4.3 HAdV GC/L. HEV strains belonging to genotype 3 were frequently detected in low concentrations in urban sewage and in biosolids or sewage containing swine feces but not in the river water samples studied. The detection of viruses by molecular techniques is useful for genetically describe emergent viruses in community wastewaters and water supplies. Quantification of JCPyV and HAdV using quantitative real-time PCR (QPCR) may be useful for evaluating virus removal efficiency in water treatment plants and as an index of the virological quality of water and of the potential presence of human viruses.

Assessment of drinking water quality using indicator bacteria and bacteriophages.

Bacterial indicators and bacteriophages suggested as potential indicators of water quality were determined by public laboratories in water from springs, household water wells, and rural and metropolitan water supplies in north-eastern Spain. Indicator bacteria were detected more frequently than bacteriophages in springs, household water wells and rural water supplies. In contrast, positive bacteriophage detections were more numerous than those of bacteria in metropolitan water supplies. Most of the metropolitan water supply samples containing indicators had concentrations of chlorine below 0.1 mg l(-1), their indicator loads resembling more closely those of rural water supplies than any other samples taken from metropolitan water supplies. The number of samples from metropolitan water supplies containing more than 0.1 mg l(-1) of chlorine that contained phages clearly outnumbered those containing indicator bacteria. Some association was observed between rainfall and the presence of indicators. Sediments from service reservoirs and water from dead ends in the distribution network of one of the metropolitan water supplies were also tested. Bacterial indicators and phages were detected in a higher percentage than in samples of tap water from the same network. Additionally, indicator bacteria were detected more frequently than bacteriophages in sediments of service reservoirs and water from dead end samples. We conclude that naturally occurring indicator bacteria and bacteriophages respond differently to chlorination and behave differently in drinking water distribution networks. Moreover, this study has shown that testing for the three groups of phages in routine laboratories is easy to implement and feasible without the requirement for additional material resources for the laboratories.

Effect of chlorine, biodegradable dissolved organic carbon and suspended bacteria on biofilm development in drinking water systems.

The influence of chlorine levels, the concentration of dissolved organic carbon and the abundance of bacteria in suspension, on the formation of biofilms on experimental glass surfaces were evaluated. Twelve reactors, packed with glass spheres, were continuously perfused with tap water. The properties of water were altered in different ways: chlorine was neutralized by the addition of thiosulfate, the levels of assimilable organic carbon were increased through the addition of acetate, and the bacterial load was modified by means of the continuous inoculation of a growing active culture of Pseudomonas aeruginosa. Continuous addition of bacteria to water containing 0.5 mg/l of free chlorine, did not result in the formation of detectable biofilms even after one month. When bacteria were added simultaneously with thiosulfate as a chlorine neutralizer, a community of attached bacteria appeared in less than 24 hours. Addition of acetate with the presence of 0.5 mg/l of chlorine did not stimulate the formation of biofilms. On the contrary, neutralization of chlorine with thiosulfate allowed the formation of biofilms with 10(6) cfu/cm(2) in about two weeks.