Evaluation the Potential of Onion/Laponite Composites Films for Sustainable Food Packaging with Enhanced UV Protection and Antioxidant Capacity.

Agro-industrial residues have attracted attention for their applications in the field of biodegradable packaging. Recently, our research group has developed onion-based films with promising properties for this type of application due to their non-toxicity, biocompatibility and biodegradability. Therefore, in this study, we investigated the effect of Laponite clay concentration on the physicochemical and antioxidant properties of the onion-based films, which were prepared by a casting method. The XRD and FTIR data confirm the presence of the mineral clay in the onion-based films. These findings are consistent with those obtained from FE-SEM analysis, which revealed the presence of typical Laponite grains. In terms of wettability, the results show that the clay decreases the hydrophilic character of the material but slightly increases the water vapor permeation. Optical characterization revealed that the materials exhibited zero transmittance in the UV region and increased opacity in the visible region for composites containing 5% and 10% Laponite. Furthermore, the antioxidant test demonstrated higher antioxidant potential in the composites compared to the pure films. Consequently, these results suggest that the formation of Laponite and onion composites could be an essential strategy for developing natural polymers in the field of food contact packaging.

3D Filaments Based on Polyhydroxy Butyrate-Micronized Bacterial Cellulose for Tissue Engineering Applications.

In this work, scaffolds based on poly(hydroxybutyrate) (PHB) and micronized bacterial cellulose (BC) were produced through 3D printing. Filaments for the printing were obtained by varying the percentage of micronized BC (0.25, 0.50, 1.00, and 2.00%) inserted in relation to the PHB matrix. Despite the varying concentrations of BC, the biocomposite filaments predominantly contained PHB functional groups, as Fourier transform infrared spectroscopy (FTIR) demonstrated. Thermogravimetric analyses (i.e., TG and DTG) of the filaments showed that the peak temperature (Tpeak) of PHB degradation decreased as the concentration of BC increased, with the lowest being 248 °C, referring to the biocomposite filament PHB/2.0% BC, which has the highest concentration of BC. Although there was a variation in the thermal behavior of the filaments, it was not significant enough to make printing impossible, considering that the PHB melting temperature was 170 °C. Biological assays indicated the non-cytotoxicity of scaffolds and the provision of cell anchorage sites. The results obtained in this research open up new paths for the application of this innovation in tissue engineering.

Ecological Biosubstrates Obtained from Onion Pulp (Allium cepa L.) for Flexible Organic Light-Emitting Diodes.

A new biopolymer obtained from onion pulp (Allium cepa L.) was employed to produce a sustainable substrate for flexible organic light-emitting diodes (FOLEDs). Indium tin oxide (ITO) and SiO2 thin films were deposited by rf-magnetron sputtering onto these biosubstrates to obtain flexible, transparent, and conductive anodes, on top of which FOLEDs were produced. This new biomaterial exhibits an optical transparency of 63% at 550 nm. ITO films were optimized by varying rf power during deposition onto the biopolymers, and their electrical properties are comparable to the those of ITO grown on top of rigid substrates: a carrier concentration of -3.63 × 1021 cm-3 and carrier mobility of 7.72 cm2 V-1 s-1 for the optimized film. Consequently, the sheet resistance and resistivity of this ITO film were 8.92 Ω sq-1 and 2.23 × 10-4 Ω cm, respectively, hence allowing the production of FOLEDs. The A. cepa L. based FOLED was fabricated using CuPc, ß-NPB, and Alq3 as organic layers, and it exhibited a maximum luminance of about 2062 cd m-2 at 16.6 V. The current efficiency reached a maximum value of 2.1 cd A-1 at 85.3 mA cm-2. The obtained results suggest the possibility to use these substrates for innovative biocompatible applications in optoelectronics, such as photodynamic therapy.

Meglumine-based supra-amphiphile self-assembled in water as a skin drug delivery system: Influence of unfrozen bound water in the system bioadhesiveness.

Hexagonal liquid crystals and supramolecular polymers from meglumine-based supra-amphiphiles were developed as drug delivery systems to be applied on the skin. The influence of fatty acid unsaturation on the structure and mechanical properties was evaluated. Moreover, we have investigated the system biocompatibility and how the type of water could influence its bioadhesive properties. Meglumine-oleic acid (MEG-OA) was arranged as hexagonal liquid crystals at 30-70 wt% water content, probably due to its curvature and increased water solubility. Meglumine-stearic acid (MEG-SA) at 10-80 wt% water content self-assembled as a lamellar polymeric network, which can be explained by the low mobility of MEG-SA in water due to hydrophobic interactions between fatty acid chains and H-bonds between meglumine and water molecules. Both systems have shown suitable mechanical parameters and biocompatibility, making them potential candidates to encapsulate therapeutic molecules for skin delivery. Moreover, a strong positive correlation between the amount of unfrozen bound water in meglumine-based systems and the bioadhesion properties was observed. This work shows that a better understanding of the physicochemical properties of a drug delivery system is extremely important for the correlation with the desired biological response and, thus, improve the product performance for biomedical applications.

Statistical prediction of interactions between low concentrations of inhibitors on yeast cells responses added to the SD-medium at low pH values.

BACKGROUND: In the present work, the main inhibitors of the yeast cells (vanillin, furfural, formic, and levulinic acid) were generated by pretreatments or hydrolysis (sulfuric acid or enzymes) to convert reducing sugars into ethanol. Inhibitors were added at increasing concentrations to the SD-medium containing yeast extract while negative effects on yeast cells were observed. Statistical analyses were applied to predict and interpret results related to biomass production. RESULTS: Inhibitors affected productivities and yields of biomass and ethanol when added to SD-medium. Based on the 23 full-central-composite design, "predicted" and "observed" values of ethanol and biomass were obtained in presence of the major inhibitors, which were acetic acid, formic acid, and levulinic acids. Increases in biomass and ethanol production are described in the Response surface graphs (RSM graphs) that resulted from multiple interactions between inhibitors. Positive interactions between the inhibitors occurred at low concentrations and pH values. The results were experimentally validated. CONCLUSIONS: Statistical analysis is an extremely useful tool for predicting data during process monitoring, while re-adjustments of conditions can be performed, whenever necessary. In addition, the development of new strains of yeast with high tolerance to biomass inhibitors will have a major impact on the production of second-generation ethanol. Increases in fermentation activity of the yeast Saccharomyces cerevisiae in a mixture containing low concentrations of inhibitors were observed.

Kinetic parameters for thermal decomposition of supramolecular polymers derived from diclofenac-meglumine supramolecular adducts.

Meglumine is an aminocarbohydrate able to form supramolecular adducts with organic acids. The recognition is based on hydrogen bonds and the structures resulting from the complexation have high solubility in water. This property has been exploited by the pharmaceutical industry in the improvement of existing drugs, and the successful example of this approach involves the poorly soluble non-steroidal anti-inflammatory drugs (NSAIDs). Investigation of the thermal behavior of adduct obtained from meglumine and the NSAID diclofenac revealed that a polymer-like material is formed from the self-assembly of diclofenac-meglumine adducts in the melt. This polymer showed a high molecular weight around 2.0×10(5)kDa. The kinetic parameters for the thermal decomposition step of the polymer were determined by the Capela-Ribeiro non-linear isoconversional method. From data for the TG curves in nitrogen atmosphere and heating rates of 5, 10, 15 and 20°Cmin(-1), the E(α) and B(α) terms could be determined, and consequently the pre-exponential factor, A(α), as well as the kinetic model, g(α).