Palliative Care for Refractory Depressive Symptoms in a Female Veteran Geriatric Patient.

AbstractPsychiatric treatment options, such as electroconvulsive therapy (ECT), can be lifesaving for individuals suffering from severe mental illness. For individuals who are unable to make or communicate their own medical decisions, this decision may fall on a legal guardian, who will make decisions on the patient's behalf. Here we discuss the considerations of end-of-life planning in a patient with severe mental illness under guardianship when treatment modalities, in this case ECT, are no longer effective.

They "Don't Know How to Deal with People Like Me": Assessing Health Care Experiences of Gender Minorities in Indiana.

Purpose: Within the LGBTQ+ community, the transgender and nonbinary (TGNB) population experience a disproportionate amount of discrimination when seeking health care. Such disparities may arise from lack of proper medical training and resources for providers or biases. In this study, we examine the health care experiences of TGNB individuals living in Southern Indiana. Methods: We analyzed responses from TGNB respondents to an LGBTQ+ health care needs assessment survey in Southern Indiana. Respondents were asked about demographic data, their self-assessed health status, quality of health care received, whether they have a provider with whom they feel comfortable sharing their gender identity with, and if they have to commute to see their provider. Finally, respondents were asked an open-ended question about their health care experiences while living in Southern Indiana. Responses were coded and several themes emerged and were analyzed. Results: Eighty-five TGNB individuals completed our survey. Less than half of respondents indicated that they had an LGBTQ+-welcoming provider (44.7%). Individuals with an LGBTQ+-welcoming provider were more likely to report their self-assessed health as excellent/good (p=0.02) and quality of health as excellent/very good (p=0.03) compared to individuals without an LGBTQ+-welcoming provider. Five themes emerged from the write-in responses (n=64): discrimination (34.4%), invalidation (32.8%), distrust (28.1%), logistic concerns (35.9%), and positive experiences (35.9%). Conclusion: The TGNB community living in Southern Indiana reports numerous barriers related to provider attitudes when obtaining health care. Additional training is needed to address provider biases and improve LGBTQ+ community health disparities.

The use of carbamazepine to expedite the metabolism of a long-acting aripiprazole injection.

WHAT IS KNOWN AND OBJECTIVE: Long-acting injectable (LAI) antipsychotics are an integral part of mental health treatment. Modifying an LAI regimen poses several challenges because of the extended half-life of the drug. CASE SUMMARY: An acutely psychotic patient with schizoaffective disorder received aripiprazole lauroxil without resolution of symptoms. She was started on a previously successful regimen of oral fluphenazine. Due to continued psychosis, oral carbamazepine was initiated to expedite the LAI's metabolism allowing subsequent doses of fluphenazine to impart activity. WHAT IS NEW AND CONCLUSION: Potent cytochrome enzyme inducers may help in transitioning patients from LAI antipsychotics to other therapies.

Evaluation of individual finger forces during activities of daily living in healthy individuals and those with hand arthritis.

INTRODUCTION: Measuring finger forces during activities of daily living and how these forces change for individuals with pathologies such as arthritis is valuable to our understanding of hand function. PURPOSE OF THE STUDY: The purpose of this study was to determine the forces of individual fingers during the performance of daily activities in healthy participants and determine the envelope of these applied forces. METHODS: This is a cross-sectional study investigating twenty-five healthy participants (12 female: 22-65 years old and 13 male: 20-53 years old) and participants with osteoarthritis (12 female: 52-79 years old and 9 male: 64-79 years old) examined at one time point. The force sensors were calibrated for each individual using a load cell to provide force output in Newtons. Each participant performed 19 activities of daily living two times. Force was plotted over time for each task, and the maximum force in each finger during that task was evaluated. RESULTS: The range of applied forces was 1.4 ± 0.6 N to 34.8 ± 1.6 N for healthy participants and 2.3 ± 1.0 N to 30.7 ± 3.7 N for those with osteoarthritis. DISCUSSION: Sensors allowed for real-time monitoring of finger forces during tasks of daily life. This provides the opportunity to isolate hand grips based on finger recruitment and provide information about the magnitude of forces during the activity. CONCLUSION: Measurement of individual finger forces can provide more accurate biomechanical models of the hand and determine the effect of disease on hand functions.

Image-Based Comparison Between the Bilateral Symmetry of the Distal Radii Through Established Measures.

PURPOSE: Anthropometric assessment of bony structures in the body is important for preoperative computer-aided surgery, implant design, finite element modeling, and biomechanical studies investigating joint structure and function. The use of the contralateral limb in surgery and clinical practice relies on the assumption that the right and left limbs of an individual are symmetric. Therefore, the purpose of this study was to quantify the bilateral symmetry of the bony structures of the distal radius using 3-dimensional (3D) computed tomography. METHODS: We collected computed tomography images of 37 paired, fresh-frozen, healthy cadaveric male upper limbs (aged 75.4 ± 8.3 years). Three-dimensional reconstructed models were created using semiautomatic segmentation. Using the 3D models, we measured 3D radial inclination, 3D volar tilt, 3D radial height, medial volar cortical angle, middle volar cortical angle, and lateral volar cortical angle and compared them between sides. RESULTS: There were no statistically significant differences measured between right and left distal radius in 37 paired wrists. Mean radial height was 12.81 mm (SD, 1.74 mm) on the left and 12.88 mm (SD, 1.72 mm) on the right. Mean volar tilt was 10.74° (SD, 3.74°) and 10.77° (SD, 3.19°) and radial inclination was 24.05° (SD, 2.63°) and 24.18° (SD, 3.41°) on the left and right, respectively. Mean volar cortical angle across the radius was 140.9° (SD, 7.9°) on the left and 140.1° (SD, 7.9°) on the right. CONCLUSIONS: Direct bilateral comparison of the distal radius and wrist joints is useful to predict normal anatomy of the injured radius, because bilateral similarities exist. CLINICAL RELEVANCE: This article provides a comprehensive list of measurements of the distal radius compared bilaterally using a 3D model. From this study, we found that the contralateral radius can be used as a benchmark with which to compare fracture reduction and to manage malunions during the preoperative planning of corrective osteotomies. It can also be used to define normal anatomy.

Wearable strain gauge-based technology measures manual tactile forces during the activities of daily living.

INTRODUCTION: Current methods of determining applied forces in the hand rely on grip dynamometers or force-measurement gloves which are limited in their ability to isolate individual finger forces and interfere with the sense of touch. The objective of this study was to develop an improved force measurement system that could be used during various activities of daily living. METHODS: Custom-made strain gauge sensors were secured to the fingernail of four fingers and two middle phalanges and calibrated to measure hand forces in eight healthy individuals during five activities of daily living. RESULTS: These sensors were capable of measuring forces as small as 0.17 N and did not saturate at high force tasks around 15 N, which is within the envelope of forces experienced during daily life. Preliminary data demonstrate the ability of these tactile sensors to reliably distinguish which fingers/segments were used in various tasks. CONCLUSIONS: Until now, there has been no method for real-time unobtrusive monitoring of force exposure during the tasks of daily life. The system used in this study provides a new type of low-cost wearable technology to monitor forces in the hands without interfering with the contact surface of the hand.

Giving new life to old lungs: methods to produce and assess whole human paediatric bioengineered lungs.

We report, for the first time, the development of an organ culture system and protocols to support recellularization of whole acellular (AC) human paediatric lung scaffolds. The protocol for paediatric lung recellularization was developed using human transformed or immortalized cell lines and single human AC lung scaffolds. Using these surrogate cell populations, we identified cell number requirements, cell type and order of cell installations, flow rates and bioreactor management methods necessary for bioengineering whole lungs. Following the development of appropriate cell installation protocols, paediatric AC scaffolds were recellularized using primary lung alveolar epithelial cells (AECs), vascular cells and tracheal/bronchial cells isolated from discarded human adult lungs. Bioengineered paediatric lungs were shown to contain well-developed vascular, respiratory epithelial and lung tissue, with evidence of alveolar-capillary junction formation. Types I and II AECs were found thoughout the paediatric lungs. Furthermore, surfactant protein-C and -D and collagen I were produced in the bioengineered lungs, which resulted in normal lung compliance measurements. Although this is a first step in the process of developing tissues for transplantation, this study demonstrates the feasibility of producing bioengineered lungs for clinical use. Copyright © 2016 John Wiley & Sons, Ltd.

Production and assessment of decellularized pig and human lung scaffolds.

The authors have previously shown that acellular (AC) trachea-lung scaffolds can (1) be produced from natural rat lungs, (2) retain critical components of the extracellular matrix (ECM) such as collagen-1 and elastin, and (3) be used to produce lung tissue after recellularization with murine embryonic stem cells. The aim of this study was to produce large (porcine or human) AC lung scaffolds to determine the feasibility of producing scaffolds with potential clinical applicability. We report here the first attempt to produce AC pig or human trachea-lung scaffold. Using a combination of freezing and sodium dodecyl sulfate washes, pig trachea-lungs and human trachea-lungs were decellularized. Once decellularization was complete we evaluated the structural integrity of the AC lung scaffolds using bronchoscopy, multiphoton microscopy (MPM), assessment of the ECM utilizing immunocytochemistry and evaluation of mechanics through the use of pulmonary function tests (PFTs). Immunocytochemistry indicated that there was loss of collagen type IV and laminin in the AC lung scaffold, but retention of collagen-1, elastin, and fibronectin in some regions. MPM scoring was also used to examine the AC lung scaffold ECM structure and to evaluate the amount of collagen I in normal and AC lung. MPM was used to examine the physical arrangement of collagen-1 and elastin in the pleura, distal lung, lung borders, and trachea or bronchi. MPM and bronchoscopy of trachea and lung tissues showed that no cells or cell debris remained in the AC scaffolds. PFT measurements of the trachea-lungs showed no relevant differences in peak pressure, dynamic or static compliance, and a nonrestricted flow pattern in AC compared to normal lungs. Although there were changes in content of collagen I and elastin this did not affect the mechanics of lung function as evidenced by normal PFT values. When repopulated with a variety of stem or adult cells including human adult primary alveolar epithelial type II cells both pig and human AC scaffolds supported cell attachment and cell viability. Examination of scaffolds produced using a variety of detergents indicated that detergent choice influenced human immune response in terms of T cell activation and chemokine production.

Magnesium deficiency reduces fear-induced conditional lick suppression in mice.

The consequences of broad-scale alterations in magnesium (Mg2+) levels on learning and memory are poorly understood. We have recently demonstrated that adult male mice maintained on an Mg2+-deficient diet exhibit reduced conditional freezing behavior. The purpose of the present study was to determine if the detrimental effect of Mg2+ deficiency in mice extended to another measure of conditional fear, conditioned lick suppression (CLS), as well as to another form of learning, spatial learning in the swim maze task. Adult male C57Bl/6J mice were provided with a normal or Mg2+-deficient diet and were trained and tested ten days later for conditional fear, using CLS and freezing as indicators of learning. Learning in the swim maze was tested in a separate cohort of mice during days 14-18 of diet exposure. Mg2+-deficient mice showed reduced CLS as well as conditional freezing behavior in comparison to control mice. However, learning in the swim maze task was normal in Mg2+-deficient mice. These studies indicate that the detrimental effects of Mg2+ deficiency extend to other measures of conditional fear but not to all forms of learning.