RESUMEN
Objective: To evaluate the feasibility of Fourier transform infrared attenuated total reflectance (FTIR-ATR) spectroscopy to detect cartilage degradation due to osteoarthritis and to validate the methodology with osteochondral human cartilage samples for future development towards clinical use. Design: Cylindrical (d â= â4 âmm) osteochondral samples (n â= â349) were prepared from nine human cadavers and measured with FTIR-ATR spectroscopy. Afterwards, the samples were assessed with Osteoarthritis Research Society International (OARSI) osteoarthritis cartilage histopathology assessment system and divided into two groups: 1) healthy (OARSI 0-2) and 2) osteoarthritic (OARSI 2.5-6). The classification was done with partial least squares discriminant analysis model utilizing cross-model validation. Receiver operating characteristics curve analysis was performed and the area under curve (AUC) was calculated. Results: For all samples combined, classification accuracy was 73% with AUC of 0.79. Femoral samples had accuracy of 74% and AUC of 0.77, while tibial samples had accuracy of 66%, and AUC of 0.74. Patellar samples had accuracy of 84% and AUC of 0.91. Conclusions: The results indicate that FTIR-ATR spectroscopy can differentiate between healthy and osteoarthritic femoral, tibial and patellar human tissue. If combined with a fiber optic probe, FTIR-ATR spectroscopy could provide additional objective intraoperative information during arthroscopic surgeries, which could improve clinical outcomes.
RESUMEN
BACKGROUND: Articular cartilage degeneration is the hallmark change of osteoarthritis, a severely disabling disease with high prevalence and considerable socioeconomic and individual burden. Early, potentially reversible cartilage degeneration is characterized by distinct changes in cartilage composition and ultrastructure, while the tissue's morphology remains largely unaltered. Hence, early degenerative changes may not be diagnosed by clinical standard diagnostic tools. METHODS: Against this background, this study introduces a novel method to determine the tissue composition non-invasively. Our method involves quantitative MRI parameters (i.e., T1, T1ρ, T2 and [Formula: see text] maps), compositional reference measurements (i.e., microspectroscopically determined local proteoglycan [PG] and collagen [CO] contents) and machine learning techniques (i.e., artificial neural networks [ANNs] and multivariate linear models [MLMs]) on 17 histologically grossly intact human cartilage samples. RESULTS: Accuracy and precision were higher in ANN-based predictions than in MLM-based predictions and moderate-to-strong correlations were found between measured and predicted compositional parameters. CONCLUSION: Once trained for the clinical setting, advanced machine learning techniques, in particular ANNs, may be used to non-invasively determine compositional features of cartilage based on quantitative MRI parameters with potential implications for the diagnosis of (early) degeneration and for the monitoring of therapeutic outcomes.
Asunto(s)
Cartílago Articular/diagnóstico por imagen , Aprendizaje Automático , Imágenes de Resonancia Magnética Multiparamétrica , Osteoartritis de la Rodilla/diagnóstico por imagen , Espectroscopía Infrarroja por Transformada de Fourier , Adulto , Anciano , Anciano de 80 o más Años , Cartílago Articular/metabolismo , Cartílago Articular/patología , Femenino , Humanos , Masculino , Persona de Mediana Edad , Osteoartritis de la Rodilla/metabolismo , Osteoartritis de la Rodilla/patologíaRESUMEN
Since Galileo's days the effect of size on the anatomical characteristics of the structural elements of the body has been a subject of interest. However, the effects of scaling at tissue level have received little interest and virtually no data exist on the subject with respect to the osteochondral unit in the joint, despite this being one of the most lesion-prone and clinically relevant parts of the musculoskeletal system. Imaging techniques, including Fourier transform infrared imaging, polarized light microscopy and micro computed tomography, were combined to study the response to increasing body mass of the osteochondral unit. We analyzed the effect of scaling on structural characteristics of articular cartilage, subchondral plate and the supporting trabecular bone, across a wide range of mammals at microscopic level. We demonstrated that, while total cartilage thickness scales to body mass in a negative allometric fashion, thickness of different cartilage layers did not. Cartilage tissue layers were found to adapt to increasing loads principally in the deep zone with the superficial layers becoming relatively thinner. Subchondral plate thickness was found to have no correlation to body mass, nor did bone volume fraction. The underlying trabecular bone was found to have thicker trabeculae (r=0.75, p<0.001), as expected since this structure carries most loads and plays a role in force mitigation. The results of this study suggest that the osteochondral tissue structure has remained remarkably preserved across mammalian species during evolution, and that in particular, the trabecular bone carries the adaptation to the increasing body mass.
Asunto(s)
Peso Corporal , Huesos/anatomía & histología , Mamíferos/anatomía & histología , Animales , Hueso Esponjoso/anatomía & histología , Cartílago Articular/anatomía & histología , Colágeno/metabolismo , Humanos , Proteoglicanos/metabolismo , Especificidad de la Especie , Espectroscopía Infrarroja por Transformada de Fourier , Microtomografía por Rayos XRESUMEN
OBJECTIVE: To investigate the feasibility of near-infrared (NIR) spectroscopy (NIRS) for evaluation of human articular cartilage biomechanical properties during arthroscopy. DESIGN: A novel arthroscopic NIRS probe designed in our research group was utilized by an experienced orthopedic surgeon to measure NIR spectra from articular cartilage of human cadaver knee joints (ex vivo, n = 18) at several measurement locations during an arthroscopic surgery. Osteochondral samples (n = 265) were extracted from the measurement sites for reference analysis. NIR spectra were remeasured in a controlled laboratory environment (in vitro), after which the corresponding cartilage thickness and biomechanical properties were determined. Hybrid multivariate regression models based on principal component analysis and linear mixed effects modeling (PCA-LME) were utilized to relate cartilage in vitro spectra and biomechanical properties, as well as to account for the spatial dependency. Additionally, a k-nearest neighbors (kNN) classifier was employed to reject outlying ex vivo NIR spectra resulting from a non-optimal probe-cartilage contact. Model performance was evaluated for both in vitro and ex vivo NIR spectra via Spearman's rank correlation (ρ) and the ratio of performance to interquartile range (RPIQ). RESULTS: Regression models accurately predicted cartilage thickness and biomechanical properties from in vitro NIR spectra (Model: 0.77 ≤ ρ ≤ 0.87, 2.03 ≤ RPIQ ≤ 3.0; Validation: 0.74 ≤ ρ ≤ 0.84, 1.87 ≤ RPIQ ≤ 2.90). When predicting cartilage properties from ex vivo NIR spectra (0.33 ≤ ρ ≤ 0.57 and 1.02 ≤ RPIQ ≤ 2.14), a kNN classifier enhanced the accuracy of predictions (0.52 ≤ ρ ≤ 0.87 and 1.06 ≤ RPIQ ≤ 1.88). CONCLUSION: Arthroscopic NIRS could substantially enhance identification of damaged cartilage by enabling quantitative evaluation of cartilage biomechanical properties. The results demonstrate the capacity of NIRS in clinical applications.
Asunto(s)
Artroscopía , Cartílago Articular/diagnóstico por imagen , Articulación de la Rodilla/diagnóstico por imagen , Espectroscopía Infrarroja Corta , Anciano , Cadáver , Cartílago Articular/cirugía , Estudios de Factibilidad , Femenino , Humanos , Articulación de la Rodilla/cirugía , Masculino , Análisis de Componente Principal , Análisis de RegresiónRESUMEN
A lot has been invested into understanding how to assemble cartilage tissue in vitro and various designs have been developed to manufacture cartilage tissue with native-like biological properties. So far, no satisfactory design has been presented. Bovine primary chondrocytes are used to self-assemble scaffold-free constructs to investigate whether mechanical loading by centrifugal force would be useful in manufacturing cartilage tissue in vitro. Six million chondrocytes were laid on top of defatted bone disks placed inside an agarose well in 50-ml culture tubes. The constructs were centrifuged once or three times per day for 15 min at a centrifugal force of 771×g for up to 4 weeks. Control samples were cultured under the same conditions without exposure to centrifugation. The samples were analysed by (immuno)histochemistry, Fourier transform infrared imaging, micro-computed tomography, biochemical and gene expression analyses. Biomechanical testing was also performed. The centrifuged tissues had a more even surface covering a larger area of the bone disk. Fourier transform infrared imaging analysis indicated a higher concentration of collagen in the top and bottom edges in some of the centrifuged samples. Glycosaminoglycan contents increased along the culture, while collagen content remained at a rather constant level. Aggrecan and procollagen α1(II) gene expression levels had no significant differences, while procollagen α2(I) levels were increased significantly. Biomechanical analyses did not reveal remarkable changes. The centrifugation regimes lead to more uniform tissue constructs, whereas improved biological properties of the native tissue could not be obtained by centrifugation.
Asunto(s)
Cartílago Articular/crecimiento & desarrollo , Condrocitos/citología , Organogénesis , Animales , Bovinos , Células Cultivadas , Centrifugación , Condrocitos/metabolismo , Colágeno/metabolismo , Módulo de Elasticidad , Glicosaminoglicanos/metabolismo , Hidroxiprolina/metabolismo , Ensayo de Materiales , Proteoglicanos/metabolismo , ARN Mensajero/genética , ARN Mensajero/metabolismo , Andamios del Tejido/químicaRESUMEN
OBJECTIVE: Our aim is to establish methods for quantifying morphometric properties of calcified cartilage (CC) from micro-computed tomography (µCT). Furthermore, we evaluated the feasibility of these methods in investigating relationships between osteoarthritis (OA), tidemark surface morphology and open subchondral channels (OSCCs). METHOD: Samples (n = 15) used in this study were harvested from human lateral tibial plateau (n = 8). Conventional roughness and parameters assessing local 3-dimensional (3D) surface variations were used to quantify the surface morphology of the CC. Subchondral channel properties (percentage, density, size) were also calculated. As a reference, histological sections were evaluated using Histopathological osteoarthritis grading (OARSI) and thickness of CC and subchondral bone (SCB) was quantified. RESULTS: OARSI grade correlated with a decrease in local 3D variations of the tidemark surface (amount of different surface patterns (rs = -0.600, P = 0.018), entropy of patterns (EP) (rs = -0.648, P = 0.018), homogeneity index (HI) (rs = 0.555, P = 0.032)) and tidemark roughness (TMR) (rs = -0.579, P = 0.024). Amount of different patterns (ADP) and EP associated with channel area fraction (CAF) (rp = 0.876, P < 0.0001; rp = 0.665, P = 0.007, respectively) and channel density (CD) (rp = 0.680, P = 0.011; rp = 0.582, P = 0.023, respectively). TMR was associated with CAF (rp = 0.926, P < 0.0001) and average channel size (rp = 0.574, P = 0.025). CC topography differed statistically significantly in early OA vs healthy samples. CONCLUSION: We introduced a µ-CT image method to quantify 3D CC topography and perforations through CC. CC topography was associated with OARSI grade and OSCC properties; this suggests that the established methods can detect topographical changes in tidemark and CC perforations associated with OA.
Asunto(s)
Calcinosis/diagnóstico por imagen , Cartílago Articular/diagnóstico por imagen , Osteoartritis de la Rodilla/diagnóstico por imagen , Anciano , Cadáver , Calcinosis/etiología , Calcinosis/patología , Cartílago Articular/patología , Humanos , Imagenología Tridimensional/métodos , Persona de Mediana Edad , Osteoartritis de la Rodilla/complicaciones , Osteoartritis de la Rodilla/patología , Interpretación de Imagen Radiográfica Asistida por Computador/métodos , Índice de Severidad de la Enfermedad , Microtomografía por Rayos X/métodosRESUMEN
Articular cartilage undergoes structural and biochemical changes during maturation, but the knowledge on how these changes relate to articular cartilage function at different stages of maturation is lacking. Equine articular cartilage samples of four different maturation levels (newborn, 5-month-old, 11-month-old and adult) were collected (N = 25). Biomechanical tensile testing, Fourier transform infrared microspectroscopy (FTIR-MS) and polarized light microscopy were used to study the tensile, biochemical and structural properties of articular cartilage, respectively. The tensile modulus was highest and the breaking energy lowest in the newborn group. The collagen and the proteoglycan contents increased with age. The collagen orientation developed with age into an arcade-like orientation. The collagen content, proteoglycan content, and collagen orientation were important predictors of the tensile modulus (p < 0.05 in multivariable regression) and correlated significantly also with the breaking energy (p < 0.05 in multivariable regression). Partial least squares regression analysis of FTIR-MS data provided accurate predictions for the tensile modulus (r = 0.79) and the breaking energy (r = 0.65). To conclude, the composition and structure of equine articular cartilage undergoes changes with depth that alter functional properties during maturation, with the typical properties of mature tissue reached at the age of 5-11 months.
Asunto(s)
Cartílago Articular/anatomía & histología , Cartílago Articular/crecimiento & desarrollo , Caballos/fisiología , Resistencia a la Tracción/fisiología , Animales , Fenómenos Biomecánicos , Colágeno/metabolismo , Análisis de los Mínimos Cuadrados , Análisis Multivariante , Proteoglicanos/metabolismo , Análisis de RegresiónRESUMEN
OBJECTIVE: The aims of this study were: to 1) develop a novel sample processing protocol to visualize human articular cartilage (AC) chondrons using micro-computed tomography (µCT), 2) develop and validate an algorithm to quantify the chondron morphology in 3D, and 3) compare the differences in chondron morphology between intact and osteoarthritic AC. METHOD: The developed protocol is based on the dehydration of samples with hexamethyldisilazane (HMDS), followed by imaging with a desktop µCT. Chondron density and depth, as well as volume and sphericity, were calculated in 3D with a custom-made and validated algorithm employing semi-automatic chondron selection and segmentation. The quantitative parameters were analyzed at three AC depth zones (zone 1: 0-10%; zone 2: 10-40%; zone 3: 40-100%) and grouped by the OARSI histological grades (OARSI grades 0-1.0, n = 6; OARSI grades 3.0-3.5, n = 6). RESULTS: After semi-automatic chondron selection and segmentation, 1510 chondrons were approved for 3D morphometric analyses. The chondrons especially in the deeper tissue (zones 2 and 3) were significantly larger (P < 0.001) and less spherical (P < 0.001), respectively, in the OARSI grade 3-3.5 group compared to the OARSI grade 0-1.0 group. No statistically significant difference in chondron density between the OARSI grade groups was observed at different depths. CONCLUSION: We have developed a novel sample processing protocol for chondron imaging in 3D, as well as a high-throughput algorithm to semi-automatically quantify chondron/chondrocyte 3D morphology in AC. Our results also suggest that 3D chondron morphology is affected by the progression of osteoarthritis (OA).
Asunto(s)
Cartílago Articular/diagnóstico por imagen , Condrocitos/patología , Imagenología Tridimensional/métodos , Microtomografía por Rayos X/métodos , Adulto , Cartílago Articular/patología , Femenino , Humanos , Técnicas In Vitro , Masculino , Persona de Mediana Edad , Osteoartritis/diagnóstico por imagen , Osteoartritis/patologíaRESUMEN
Horses are precocial animals and able to stand and walk within hours after birth. To cope with associated loading, intrauterine bone development has shown to be anticipative. This study provides further insight into the post-natal development of structurally important features of trabecular and subchondral bone of the talus and sagittal ridge of the tibia of warm-blooded horses. In all areas studied, the average bone volume fraction showed a gradual increase over time, which was the result of a significant increase in trabecular thickness, without significant changes in the degree of anisotropy. Similar to the mineralised part of the bone, collagen content, measured as average retardation using polarised light microscopy, increased significantly, but the degree of anisotropy of the collagen type I network did not. At birth, the subchondral bone layer had a more trabecular aspect, gradually changing to an even surface with only a few vascular canals at an age of 2 months. Presented results indicate the necessity for a stronger structure, but not for a different structural design after birth, providing further evidence for anticipatory bone development in the horse. More knowledge about the strategies used to cope with mechanical loading after birth might be helpful in understanding the developmental bone and joint diseases.
Asunto(s)
Envejecimiento , Desarrollo Óseo/fisiología , Caballos/anatomía & histología , Caballos/crecimiento & desarrollo , Astrágalo/crecimiento & desarrollo , Tibia/crecimiento & desarrollo , AnimalesRESUMEN
On-chip energy storage and management will have transformative impacts in developing advanced electronic platforms with built-in energy needs for operation of integrated circuits driving a microprocessor. Though success in growing stand-alone energy storage elements such as electrochemical capacitors (super and pseusocapacitors) on a variety of substrates is a promising step towards this direction. In this work, on-chip energy storage is demonstrated using architectures of highly aligned vertical carbon nanotubes (CNTs) acting as supercapacitors, capable of providing large device capacitances. The efficiency of these structures is further increased by incorporating electrochemically active nanoparticles such as MnOx to form pseudocapacitive architectures thus enhancing device capacitance areal specific capacitance of 37 mF/cm2. The demonstrated on-chip integration is up and down-scalable, compatible with standard CMOS processes, and offers lightweight energy storage what is vital for portable and autonomous device operation with numerous advantages as compared to electronics built from discrete components.
RESUMEN
OBJECTIVE: Histopathological grading of osteochondral (OC) tissue is widely used in osteoarthritis (OA) research, and it is relatively common in post-surgery in vitro diagnostics. However, relying on thin tissue section, this approach includes a number of limitations, such as: (1) destructiveness, (2) sample processing artefacts, (3) 2D section does not represent spatial 3D structure and composition of the tissue, and (4) the final outcome is subjective. To overcome these limitations, we recently developed a contrast-enhanced µCT (CEµCT) imaging technique to visualize the collagenous extracellular matrix (ECM) of articular cartilage (AC). In the present study, we demonstrate that histopathological scoring of OC tissue from CEµCT is feasible. Moreover, we establish a new, semi-quantitative OA µCT grading system for OC tissue. RESULTS: Pathological features were clearly visualized in AC and subchondral bone (SB) with µCT and verified with histology, as demonstrated with image atlases. Comparison of histopathological grades (OARSI or severity (0-3)) across the characterization approaches, CEµCT and histology, excellent (0.92, 95% CI = [0.84, 0.96], n = 30) or fair (0.50, 95% CI = [0.16, 0.74], n = 27) intra-class correlations (ICC), respectively. A new µCT grading system was successfully established which achieved an excellent cross-method (µCT vs histology) reader-to-reader intra-class correlation (0.78, 95% CI = [0.58, 0.89], n = 27). CONCLUSIONS: We demonstrated that histopathological information relevant to OA can reliably be obtained from CEµCT images. This new grading system could be used as a reference for 3D imaging and analysis techniques intended for volumetric evaluation of OA pathology in research and clinical applications.
Asunto(s)
Cartílago Articular/patología , Osteoartritis de la Rodilla/patología , Anciano , Anciano de 80 o más Años , Artroplastia de Reemplazo de Rodilla , Calcinosis/diagnóstico por imagen , Cartílago Articular/diagnóstico por imagen , Medios de Contraste , Matriz Extracelular/patología , Estudios de Factibilidad , Humanos , Persona de Mediana Edad , Variaciones Dependientes del Observador , Osteoartritis de la Rodilla/diagnóstico por imagen , Osteoartritis de la Rodilla/cirugía , Índice de Severidad de la Enfermedad , Microtomografía por Rayos X/métodosRESUMEN
The changes in chemical composition of human articular cartilage (AC) caused by osteoarthritis (OA) were investigated using Fourier transform infrared microspectroscopy (FTIR-MS). We demonstrate the sensitivity of FTIR-MS for monitoring compositional changes that occur with OA progression. Twenty-eight AC samples from tibial plateaus were imaged with FTIR-MS. Hyperspectral images of all samples were combined for K-means clustering. Partial least squares regression (PLSR) analysis was used to compare the spectra with the OARSI grade (histopathological grading of OA). Furthermore, the amide I and the carbohydrate regions were used to estimate collagen and proteoglycan contents, respectively. Spectral peak at 1338 cm(-1) was used to estimate the integrity of the collagen network. The layered structure of AC was revealed using the carbohydrate region for clustering. Statistically significant correlation was observed between the OARSI grade and the collagen integrity in the superficial (r = -0.55) and the deep (r = -0.41) zones. Furthermore, PLSR models predicted the OARSI grade from the superficial (r = 0.94) and the deep (r = 0.77) regions of the AC with high accuracy. Obtained results suggest that quantitative and qualitative changes occur in the AC composition during OA progression, and these can be monitored by the use of FTIR-MS.
Asunto(s)
Factores Biológicos/análisis , Cartílago Articular/patología , Osteoartritis/patología , Espectroscopía Infrarroja por Transformada de Fourier , Carbohidratos/análisis , Colágeno/análisis , Humanos , Articulación de la Rodilla/patologíaRESUMEN
Unique biomechanical behavior of articular cartilage is a result of its structure and composition. Interrelationships of tissue constituents (collagen, proteoglycans (PGs) and water) and tissue biomechanical parameters have been studied, but it is evident that no constituent alone explains the tissue mechanics. Fourier transform infrared (FT-IR) spectra can provide detailed information about the biochemical composition of articular cartilage. In this study, a chemometric approach to predict the biomechanical behavior of articular cartilage directly from the FT-IR spectra, i.e., without converting the data into collagen and PG information, was investigated. Partial least squares regression (PLSR) was used to predict equilibrium modulus (n=32) and dynamic modulus (n=24) of bovine cartilage samples from their average FT-IR spectra. The linear correlation coefficients between the reference and predicted values of Young's modulus and dynamic modulus were r=0.866 (p<0.001) and r=0.898 (p<0.001), respectively. When the compressive biomechanical behavior of AC is predicted, the present study indicates that similar or improved results can be obtained with FT-IR spectroscopy as compared to those of traditional biochemical methods.
Asunto(s)
Cartílago Articular/fisiología , Módulo de Elasticidad , Rótula/fisiología , Estrés Fisiológico , Animales , Bovinos , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
OBJECTIVE: Successful repair of articular cartilage (AC) defects would be a major advantage due to the low ability of AC to heal spontaneously. Sensitive methods to determine changes in AC composition and structure are required to monitor the success of repair. This study evaluates the ability of unsupervised cluster analysis applied to Fourier transform infrared (FTIR) microspectroscopy to discriminate between healthy and repaired AC. METHODS: Osteochondral lesions (3 mm in depth) were surgically created in patellar grooves of rabbit femurs and were either left to heal spontaneously (n = 6) or surgically repaired with autologous chondrocytes in type II collagen gel (n = 6). After 6 months, tissues were harvested, FTIR microspectroscopy was conducted and Fuzzy c-means (FCM) cluster analysis applied to spectra of pairs of intact and repaired AC samples from each rabbit. Two spectral regions [amide I and carbohydrate (CHO)] were analyzed and the results from the two types of repair were compared. RESULTS: Two separate regions of repair were detected with FCM. The estimated proteoglycan content (from CHO region) in the repaired AC was significantly lower than that in intact AC. The spontaneously repaired AC was better distinguished from the intact AC than the collagen II gel repaired AC. The most distinct clustering was observed for spontaneously repaired samples using CHO region. CONCLUSIONS: This study revealed that unsupervised cluster analysis applied to FTIR microspectroscopy can detect subtle differences in infrared spectra between normal and repaired AC. The method may help in evaluation and optimization of future AC repair strategies.
Asunto(s)
Cartílago Articular/patología , Fémur/patología , Cicatrización de Heridas/fisiología , Amidas/análisis , Animales , Carbohidratos/análisis , Cartílago Articular/química , Condrocitos/trasplante , Análisis por Conglomerados , Colágeno Tipo II/uso terapéutico , Fémur/química , Miembro Posterior , Proteoglicanos/análisis , Conejos , Espectroscopía Infrarroja por Transformada de Fourier/métodosRESUMEN
OBJECTIVE: Recombinant human type II collagen (rhCII) gels combined with autologous chondrocytes were tested as a scaffold for cartilage repair in rabbits in vivo. METHOD: Autologous chondrocytes were harvested, expanded and combined with rhCII-gel and further pre-cultivated for 2 weeks prior to transplantation into a 4 mm diameter lesion created into the rabbit's femoral trochlea (n = 8). Rabbits with similar untreated lesions (n = 7) served as a control group. RESULTS: Six months after the transplantation the repair tissue in both groups filled the lesion site, but in the rhCII-repair the filling was more complete. Both repair groups also had high proteoglycan and type II collagen contents, except in the fibrous superficial layer. However, the integration to the adjacent cartilage was incomplete. The O'Driscoll grading showed no significant differences between the rhCII-repair and spontaneous repair, both representing lower quality than intact cartilage. In the repair tissues the collagen fibers were abnormally organized and oriented. No dramatic changes were detected in the subchondral bone structure. The repair cartilage was mechanically softer than the intact tissue. Spontaneously repaired tissue showed lower values of equilibrium and dynamic modulus than the rhCII-repair. However, the differences in the mechanical properties between all three groups were insignificant. CONCLUSION: When rhCII was used to repair cartilage defects, the repair quality was histologically incomplete, but still the rhCII-repairs showed moderate mechanical characteristics and a slight improvement over those in spontaneous repair. Therefore, further studies using rhCII for cartilage repair with emphasis on improving integration and surface protection are required.
Asunto(s)
Cartílago Articular/patología , Condrocitos/trasplante , Colágeno Tipo II/uso terapéutico , Fémur/patología , Cicatrización de Heridas/fisiología , Animales , Cartílago Articular/diagnóstico por imagen , Estudios de Casos y Controles , Colágeno Tipo II/análisis , Femenino , Fémur/diagnóstico por imagen , Fémur/cirugía , Geles , Miembro Posterior , Humanos , Microscopía de Polarización , Proteoglicanos/análisis , Conejos , Espectroscopía Infrarroja por Transformada de Fourier , Rodilla de Cuadrúpedos , Estrés Mecánico , Andamios del Tejido , Resultado del Tratamiento , Microtomografía por Rayos XRESUMEN
OBJECTIVE: Fourier transform infrared (FT-IR) spectroscopic imaging is a promising method that enables the analysis of spatial distribution of biochemical components within histological sections. However, analysis of FT-IR spectroscopic data is complicated since absorption peaks often overlap with each other. Second derivative spectroscopy is a technique which enhances the separation of overlapping peaks. The objective of this study was to evaluate the specificity of the second derivative peaks for the main tissue components of articular cartilage (AC), i.e., collagen and proteoglycans (PGs). MATERIALS AND METHODS: Histological bovine AC sections were measured before and after enzymatic removal of PGs. Both formalin-fixed sections (n = 10) and cryosections (n = 6) were investigated. Relative changes in the second derivative peak heights caused by the removal of PGs were calculated for both sample groups. RESULTS: The results showed that numerous peaks, e.g., peaks located at 1202 cm(-1) and 1336 cm(-1), altered less than 5% in the experiment. These peaks were assumed to be specific for collagen. In contrast, two peaks located at 1064 cm(-1) and 1376 cm(-1) were seen to alter notably, approximately 50% or more. These peaks were regarded to be specific for PGs. The changes were greater in cryosections than formalin-fixed sections. CONCLUSIONS: The results of this study suggest that the second derivative spectroscopy offers a practical and more specific method than routinely used absorption spectrum analysis methods to obtain compositional information on AC with FT-IR spectroscopic imaging.
Asunto(s)
Cartílago Articular/metabolismo , Animales , Cartílago Articular/anatomía & histología , Bovinos , Colágeno Tipo II/metabolismo , Criopreservación , Fijadores , Formaldehído , Masculino , Proteoglicanos/metabolismo , Espectroscopía Infrarroja por Transformada de Fourier/métodos , Fijación del TejidoRESUMEN
OBJECTIVE: Contrast-enhanced computed tomography (CECT) has been introduced for the evaluation of cartilage integrity. Furthermore, CECT enables imaging of the structure and density of subchondral bone. In this laboratory study, we investigate the potential of microCECT to simultaneously image cartilage and subchondral bone for the evaluation of tissue healing. DESIGN: Osteochondral lesions (Ø = 6 mm) were surgically created in equine intercarpal joints (n = 7). After spontaneous healing for 12 months, the horses were sacrificed and osteochondral plugs (Ø = 14 mm), including the repair cartilage and adjacent intact tissue, were harvested. The nonfibrillar and fibrillar moduli and the permeability of cartilage were determined using indentation testing. Contrast agent diffusion into the samples was imaged for 36 hours using high-resolution CT. Results from CECT, mechanical testing, and microscopic analyses were compared and correlated. RESULTS: The contrast agent diffusion coefficient showed a significant (P < 0.05) difference between the repair and adjacent intact tissue. MicroCECT revealed altered (P < 0.05) bone volume fraction, mineral density, and microstructure of subchondral bone at the repair site. The contrast agent diffusion coefficient correlated with the moduli of the nonfibrillar matrix (R = -0.662, P = 0.010), collagen fibril parallelism index (R = -0.588, P = 0.035), and glycosaminoglycan content (R = -0.503, P = 0.067). The repair cartilage was mechanically and structurally different from adjacent intact tissue (P < 0.05). CONCLUSIONS: MicroCECT enabled simultaneous quantitative evaluation of subchondral bone and monitoring of cartilage repair, distinguishing quantitatively the repair site from the adjacent intact tissue. As the only technique able to simultaneously image cartilage and determine subchondral bone mineral density and microstructure, CECT has potential clinical value.
RESUMEN
OBJECTIVE: The effect of threose-induced collagen cross-linking on the mechanical and diffusive properties of cartilage was investigated in vitro. In particular, we investigated the potential of Contrast Enhanced Computed Tomography (CECT) to detect changes in articular cartilage after increased collagen cross-linking, which is an age-related phenomenon. METHODS: Osteochondral plugs (Ø=6.0 mm, n=28) were prepared from intact bovine patellae (n=7). Two of the four adjacent samples, prepared from each patella, were treated with threose to increase the collagen cross-linking, while the other two specimen served as paired controls. One sample pair was mechanically tested and then mechanically injured using a material testing device. Contrast agent [ioxaglate (Hexabrix™)] diffusion was imaged in the other specimen pair for 25 h using CECT. Water fraction, collagen and proteoglycan content, collagen network architecture and the amount of cross-links [hydroxylysyl pyridinoline (HP), lysyl pyridinoline (LP) and pentosidine (Pent)] of the samples were also determined. RESULTS: Cartilage collagen cross-linking, both Pent and LP, were significantly (P<0.001) increased due to threose treatment. CECT could detect the increased cross-links as the contrast agent penetration and the diffusion flux were significantly (P<0.05) lower in the threose treated than in untreated samples. The equilibrium modulus (+164%, P<0.05) and strain dependent dynamic modulus (+47%, P<0.05) were both significantly greater in the threose treated samples than in reference samples, but there was no association between the initial dynamic modulus and the threose treatment. The water fraction, proteoglycan and collagen contents, as well as collagen architecture, were not significantly altered by the threose treatment. CONCLUSIONS: To conclude, the CECT technique was found to be sensitive at detecting changes in cartilage tissue due to increased collagen cross-linking. This is important since increased cross-linking has been proposed to be related to the increased injury susceptibility of tissue.
Asunto(s)
Envejecimiento/fisiología , Cartílago Articular/diagnóstico por imagen , Colágeno/química , Rótula/diagnóstico por imagen , Aminoácidos/análisis , Animales , Arginina/análogos & derivados , Arginina/análisis , Cartílago Articular/química , Estudios de Casos y Controles , Bovinos , Colágeno/análisis , Medios de Contraste , Miembro Posterior/química , Miembro Posterior/diagnóstico por imagen , Ácido Yoxáglico , Lisina/análogos & derivados , Lisina/análisis , Rótula/química , Tetrosas , Tomografía Computarizada por Rayos X/métodosRESUMEN
OBJECTIVE: To evaluate the specificity of the current Fourier transform infrared imaging spectroscopy (FT-IRIS) methods for the determination of depthwise proteoglycan (PG) content in articular cartilage (AC). In addition, curve fitting was applied to study whether the specificity of FT-IRIS parameters for PG determination could be improved. METHODS: Two sample groups from the steer AC were prepared for the study (n = 8 samples/group). In the first group, chondroitinase ABC enzyme was used to degrade the PGs from the superficial cartilage, while the samples in the second group served as the controls. Samples were examined with FT-IRIS and analyzed using previously reported direct absorption spectrum techniques and multivariate methods and, in comparison, by curve fitting. Safranin O-stained sections were measured with digital densitometry to obtain a reference for depthwise PG distribution. RESULTS: Carbohydrate region-based absorption spectrum methods showed a statistically weaker correlation with the PG reference distributions than the results of the curve fitting (subpeak located approximately at 1,060 cm(-1)). Furthermore, the shape of the depthwise profiles obtained using the curve fitting was more similar to the reference profiles than with the direct absorption spectrum analysis. CONCLUSIONS: Results suggest that the current FT-IRIS methods for PG analysis lack the specificity for quantitative measurement of PGs in AC. The curve fitting approach demonstrated that it is possible to improve the specificity of the PG analysis. However, the findings of the present study suggest that further development of the FT-IRIS analysis techniques is still needed.