RESUMEN
Plasmonic metasurfaces with spatial symmetry breaking are crucial materials with significant applications in fields such as polarization-controlled photonic devices and nanophotonic platforms for chiral sensing. In this paper, we introduce planar plasmonic metasurfaces, less than one-tenth of a wavelength thick, featuring nanocavities formed by three equilateral triangles. This configuration creates uniform, thin metasurfaces. Through a combination of experimental measurements and numerical modeling, we demonstrate the inherent superchirality of these plasmonic metasurfaces. We address the challenge of achieving a strong enhancement of optical chirality in the visible spectrum, reaching levels comparable to those of 3D chiral metasurfaces.
RESUMEN
Wheat is one of the most cultivated cereals thanks to both its nutritional value and its versatility to technological transformation. Nevertheless, the growth and yield of wheat, as well as of the other food crops, can be strongly limited by many abiotic and biotic stress factors. To face this need, new methodological approaches are required to optimize wheat cultivation from both a qualitative and quantitative point of view. In this context, crop analysis based on imaging techniques has become an important tool in agriculture. Thermography is an appealing method that represents an outstanding approach in crop monitoring, as it is well suited to the emerging needs of the precision agriculture management strategies. In this work, we performed an on-field infrared monitoring of several durum and common wheat varieties to evaluate their adaptability to the internal Mediterranean area chosen for cultivation. Two new indices based on the thermal data useful to estimate the agronomical response of wheat subjected to natural stress conditions during different phenological stages of growth have been introduced. The comparison with some productive parameters collected at harvest highlighted the correlation of the indices with the wheat yield (ranging between p < 0.001 and p < 0.05), providing interesting information for their early prediction.
RESUMEN
Melanins are pigments employed in food, cosmetic, and textile industries, manufactured by extraction from cuttlefishes. Their biotechnological production by Streptomycetes, instead, has been poorly investigated so far. In this paper, for the first time, the strain Streptomyces nashvillensis DSM 40314 was tested as an extracellular melanin producer by investigating the influence of diverse temperatures (26, 28, and 30 °C) and pH values (6.0 and 7.0) on bacterial growth, melanin production, and on the activity of the secreted tyrosinase, the first enzyme of the pigment biosynthetic pathway. In physiological 96-h shake flask experiments, the optimal growth parameters resulted to be 28 °C and pH 7.0, at which a maximum biomass of 8.4 ± 0.5 gcdw/L, a melanin concentration of 0.74 ± 0.01 g/L (yield on biomass of 0.09 ± 0.01 g/gcdw and productivity of 0.008 ± 0.001 g/L/h), and a final tyrosinase activity of 10.1 ± 0.1 U/mL were reached. The produced pigment was purified from the broth supernatant with a two-step purification process (75.0 ± 2.0% of purity with 65.0 ± 5.0% of recovery) and tested for its chemical, antioxidant, and photoprotective properties. Finally, characterization by UV-visible and FT-IR spectroscopy, elemental analyses, and mono- and bi-dimensional NMR suggested the eumelanin-like nature of the pigment.
RESUMEN
Fruit yield and quality of greenhouse tomatoes are strongly influenced by light conditions and nitrogen (N) availability, however, the interaction between these factors is still unclear. We evaluated the effects on cherry tomatoes of two tunnel plastic covers with different optical properties and three N doses, also in combination with a biostimulant treatment. We compared a diffuse light film (Film1) and a conventional clear film (Film2), and three N levels, corresponding to 50% (N50), 75% (N75) and 100% (N100) of the optimal dose, with and without a microbial plus a protein hydrolysed biostimulant, compared to a non-treated control. The three experimental treatments significantly interacted on several yield and quality parameters. In control plants (untreated with biostimulants), the early yield was higher at reduced N doses compared to N100, with greater increments under the diffusive Film1 compared to the clear Film2 (+57.7% and +37.0% vs. +31.7% and +16.0%, in N50 and N75 respectively). Film1 boosted the total fruit production at all the N rates and with or without biostimulants, compared to Film2, with stronger effects under sub-optimal N (+29.4% in N50, +21.2% in N75, and +7.8% in N100, in plants untreated with biostimulant). Total yield decreased with decreasing N levels, while it always increased with the application of biostimulants, which counterbalanced the detrimental effects of N shortage. Quality traits were mainly affected by the cover film and the biostimulant treatment. The diffusive film increased the content of carotenoids, lycopene and total phenols compared to the clear one, and the biostimulants increased texture, soluble solids, phenols and ascorbic acid compared to the untreated control. It is worth noting that in plants fertilized at 75% of the reference N dose, the biostimulants determined higher yield than the N100 untreated control, under both the covers (+48% in Film1 and +20% in Film2). In conclusion, the diffusive film improved the fruit yield and quality of greenhouse tomatoes in the spring-summer period, presumably avoiding plant stress due to high-intensity direct light. Reduced N rates limited the plant productivity, however, the biostimulant application was effective in compensating for the detrimental effects of sub-optimal supply of N synthetic fertilizers.
RESUMEN
The World Health Organization (WHO) declared in a May 2023 announcement that the COVID-19 illness is no longer categorized as a Public Health Emergency of International Concern (PHEIC); nevertheless, it is still considered an actual threat to world health, social welfare and economic stability. Consequently, the development of a convenient, reliable and affordable approach for detecting and identifying SARS-CoV-2 and its emerging new variants is crucial. The fingerprint and signal amplification characteristics of surface-enhanced Raman spectroscopy (SERS) could serve as an assay scheme for SARS-CoV-2. Here, we report a machine learning-based label-free SERS technique for the rapid and accurate detection and identification of SARS-CoV-2. The SERS spectra collected from samples of four types of coronaviruses on gold nanoparticles film, fabricated using a Langmuir-Blodgett self-assembly, can provide more spectroscopic signatures of the viruses and exhibit low limits of detection (<100 TCID50/mL or even <10 TCID50/mL). Furthermore, the key Raman bands of the SERS spectra were systematically captured by principal component analysis (PCA), which effectively distinguished SARS-CoV-2 and its variant from other coronaviruses. These results demonstrate that the combined use of SERS technology and PCA analysis has great potential for the rapid analysis and discrimination of multiple viruses and even newly emerging viruses without the need for a virus-specific probe.
Asunto(s)
COVID-19 , Nanopartículas del Metal , Humanos , Espectrometría Raman/métodos , SARS-CoV-2 , Nanopartículas del Metal/química , Análisis de Componente Principal , Oro/química , COVID-19/diagnósticoRESUMEN
In this study, we present an innovative approach to increase the quantum yield and wavelength sensitivity of photomobile polymer (PMP) films based on azobenzene by doping the polymer matrix with noble metal nanoparticles. These doped PMP films showed faster and more significant bending under both UV as well as visible and near-infrared light regardless of whether it was coherent, incoherent, polarized, or unpolarized irradiation, expanding the potential of PMP-based actuators. To illustrate their practical implications, we created a proof-of-concept model of power generation by coupling it to flexible piezoelectric materials under simulated sunlight. This model has been tested under real operating conditions, thus demonstrating the possibility of generating electricity with variable light exposure. Additionally, our synthetic protocol is solvent-free, which is another benefit of environmental relevance. Our research lays the groundwork for the development of sunlight-sensitive devices, such as photomechanical actuators and advanced photovoltaic modules, which may break ground in the thriving field of smart materials. We are confident that the presented findings will contribute to the ongoing discourse in the field and inspire additional advances in renewable energy applications.
RESUMEN
Composite materials have been used for many years in a wide variety of sectors starting from aerospace and nautical up to more commonly used uses such as bicycles, glasses, and so on. The characteristics that have made these materials popular are mainly their low weight, resistance to fatigue, and corrosion. In contrast to the advantages, however, it should be noted that the manufacturing processes of composite materials are not eco-friendly, and their disposal is rather difficult. For these reasons, in recent decades, the use of natural fibers has gained increasing attention, allowing the development of new materials sharing the same advantages with conventional composite systems while respecting the environment. In this work, the behavior of totally eco-friendly composite materials during flexural tests has been studied through infrared (IR) analysis. IR imaging is a well-known non-contact technique and represents a reliable means of providing low-cost in situ analysis. According to this method, the surface of the sample under investigation is monitored, under natural conditions or after heating, by recording thermal images with an appropriate IR camera. Here, the results achieved for jute- and basalt-based eco-friendly composites through the use of both passive and active IR imaging approaches are reported and discussed, showing the possibilities of use also in an industrial environment.
RESUMEN
Cultivation of wild rocket [Diplotaxis tenuifolia (L.) D.C.] as a baby-leaf vegetable for the high-convenience food chain is constantly growing due to its nutritional and taste qualities. As is well known, these crops are particularly exposed to soil-borne fungal diseases and need to be effectively protected. At present, wild rocket disease management is performed by using permitted synthetic fungicides or through the application of agro-ecological and biological methods that must be optimized. In this regard, the implementation of innovative digital-based technologies, such as infrared thermography (IT), as supporting systems to decision-making processes is welcome. In this work, leaves belonging to wild rocket plants inoculated with the soil-borne pathogens Rhizoctonia solani Kühn and Sclerotinia sclerotiorum (Lib.) de Bary were analyzed and monitored by both active and passive thermographic methods and compared with visual detection. A comparison between the thermal analysis carried out in both medium (MWIR)- and long (LWIR)-wave infrared was made and discussed. The results achieved highlight how the monitoring based on the use of IT is promising for carrying out an early detection of the rot diseases induced by the investigated pathogens, allowing their detection in 3-6 days before the canopy is completely wilted. Active thermal imaging has the potential to detect early soil-borne rotting diseases.
RESUMEN
Rocket species are rich in nutrients with well-known bioactive activity, but their content depends on several factors, such as plant-UV radiation interaction. In this work, we measured the production of nutritional elements in wild rocket (Diplotaxis tenuifolia L.) leaves as a function of exposure to UV-B radiation by adopting a combined approach. The wild rocket plants were grown under three greenhouse cover films (A, B, and C) having different transmittivity to UV-B and the fresh-cut leaves were exposed to UV-B in postharvest for 45, 150, 330, and 660 s. The content of chlorophyll, carotenoids, phenolic compounds, ascorbic acid, and the antioxidant activity were determined. Chlorophyll, carotenoids, and total phenolic content were significantly increased by the combination of Film C and treatment with UV-B for 45 s. The predominant phenolic compounds were kaempferol, isorhamnetin, and quercetin. Film C also elicited an increase in ascorbic acid (the most abundant antioxidant compound in the range 374-1199 per 100 g of dry matter) and antioxidant activity. These findings highlighted an increase in bioactive compound content in the wild rocket when it was cultivated under Film C (diffused light film with a tailored UV-B transmission dose) and treated with UV-B radiation for 45 s postharvest, corresponding to an energy dose of 0.2 KJ m-2.
RESUMEN
Azobenzene is one of the most investigated photo-responsive liquid crystalline molecules. It can isomerize between two different isoforms, trans (E) and cis (Z) configurations, when stimulated by light. It is used as a molecular engine in photo-mobile materials (PMPs). The use of liquid crystals (LCs) as building blocks enhances the mechanical properties of the PMPs. It is not easy to obtain PMPs with monodomain configurations when the LCs are 100% azobenzene. In this work, we studied three LC mixtures, describing the thermo/mechanical phenomena that regulate the actuation of such materials. The nematic temperature of the LC elastomers was measured and the PMPs carefully characterized for their bending and speed capability. Our finding suggests that the ratio between linear and cross-linker monomer greatly influences the nematic temperature of the mixture. Furthermore, 100% azobenzene materials polymerized using dicumyl peroxide can be useful to design polarization-selective switches.
RESUMEN
A long-term reusable sensor that provides the opportunity to easily regenerate the active surface and minimize the occurrence of undesired absorption events is an appealing solution that helps to cut down the costs and improve the device performances. Impressive advances have been made in the past years concerning the development of novel cutting-edge sensors, but the reusability can currently represent a challenge. Direct shielding of the sensor surface is not always applicable, because it can impact the device performance. This study reports an antiadhesive layer (AAL) made of 90 mg/mL DNA sodium salt from salmon testes (ssstDNA) for passivating gold plasmonic sensor surfaces. Our gold two-dimensional (2D) nanostructured plasmonic metasurfaces modified with AAL were used for DNA quantification. AAL is thin enough that the plasmonic sensor remains sensitive to subsequent deposition of DNA, which serves as an analyte. AAL protects the gold surface from unwanted nonspecific adsorption by enabling wash-off of the deposited analyte after analysis and thus recovery of the LSPR peak position (rLSPR). The calibration curve obtained on a single nanostructure (Achiral Octupolar, 100 nm pitch) gave an LOD = 105 ng/mL and an extraordinary dynamic range, performances comparable or superior to those of commercial UV-vis spectrometers for acid nucleic dosage. Two different analytes were tested: ssstDNA (â¼2000 bp) in deionized water and double-strand DNA (dsDNA) of 546-1614 bp in 100 mM Tris buffer and 10 mM MgCl2. The two nanostructures (Achiral Octupolar 25 and 100) were found to have the same sensitivity to DNA in deionized water but different sensitivity to DNA in a salt/buffer solution, opening a potential for solute discrimination. To the best of our knowledge, this is the first report on the use of AAL made of several kilobase-pairs-long dsDNA to produce a reusable plasmonic sensor. The working principle and limitations are drawn based on the LSPR and SERS study.
RESUMEN
Copper-based fungicides are largely used in agriculture in the control of a wide range of plant diseases. Applied on plants, they remain deposited on leaf surfaces and are not absorbed into plant tissues. Because of accumulation problems and their ecotoxicological profiles in the soil, their use needs to be monitored and controlled, also by using modern technologies to better optimize the efficacy rendering minimum the amount of copper per season used. In this work, we test a novel approach based on pulsed thermography to evaluate the persistence of the copper on plant leaves so that the time between two applications should be the minimum needs. We monitored the thermal response observed on different treatments of both grapevine and tobacco plants over a 3-week period. Our experimental results demonstrate that the new methodological approach based on pulsed thermography can be an effective tool to evaluate in real time the presence of copper on differently treated plants allowing a tentative quantification and, therefore, to optimize its use in the agricultural practices, according also to the European Regulation n. 1107/2009.
Asunto(s)
Cobre , Fungicidas Industriales , Cobre/farmacología , Monitoreo del Ambiente , Hojas de la Planta , TermografíaRESUMEN
The efficiency of photomobile polymers (PMP) in the conversion of light into mechanical work plays a fundamental role in achieving cutting-edge innovation in the development of novel applications ranging from energy harvesting to sensor approaches. Because of their photochromic properties, azobenzene monomers have been shown to be an efficient material for the preparation of PMPs with appropriate photoresponsivity. Upon integration of the azobenzene molecules as moieties into a polymer, they act as an engine, allowing fast movements of up to 50 Hz. In this work we show a promising approach for integrating ZnO nanoparticles into a liquid crystalline polymer network. The addition of such nanoparticles allows the trapping of incoming light, which acts as diffusive points in the polymer matrix. We characterized the achieved nanocomposite material in terms of thermomechanical and optical properties and finally demonstrated that the doped PMP was better performing that the undoped PMP film.
RESUMEN
Imidacloprid is the most widely used insecticide in agriculture and its intensive use over the last 30 years has caused a global concern due to its potentially toxic effects on the ecosystem. Considering the recent scientific interest in novel simple methods for imidacloprid analysis, we propose a label-free sensitive and specific localised surface plasmon resonance system for the detection of the insecticide based on 2D nanostructured metasurfaces with highly performing plasmonic properties. The specificity of the sensor proposed was achieved by covalent bio-functionalization of the metasurface using a smart and easy one-step procedure mediated by carbon disulphide. The biosensor produced was tested using a set of imidacloprid standard solutions showing a competitive limit of detection, lower than 1 ng mL-1. Our novel nanosensing configuration represents a valid and reliable solution to realize low-cost portable POC tests as an alternative to the laborious and expensive methods traditionally used for insecticide detection.
Asunto(s)
Insecticidas/análisis , Neonicotinoides/análisis , Nitrocompuestos/análisis , Resonancia por Plasmón de Superficie/métodos , Anticuerpos Inmovilizados/inmunología , Anticuerpos Monoclonales/inmunología , Oro/química , Insecticidas/inmunología , Límite de Detección , Nanopartículas del Metal/química , Neonicotinoides/inmunología , Nitrocompuestos/inmunologíaRESUMEN
An inverted pyramidal metasurface was designed, fabricated, and studied at the nanoscale level for the development of a label-free pathogen detection on a chip platform that merges nanotechnology and surface-enhanced Raman scattering (SERS). Based on the integration and synergy of these ingredients, a virus immunoassay was proposed as a relevant proof of concept for very sensitive detection of hepatitis A virus, for the first time to our best knowledge, in a very small volume (2 µL), without complex signal amplification, allowing to detect a minimal virus concentration of 13 pg/mL. The proposed work aims to develop a high-flux and high-accuracy surface-enhanced Raman spectroscopy (SERS) nanobiosensor for the detection of pathogens to provide an effective method for early and easy water monitoring, which can be fast and convenient.
Asunto(s)
Técnicas Biosensibles/métodos , Virus de la Hepatitis A/aislamiento & purificación , Nanoporos , Espectrometría Raman/métodos , Anticuerpos Inmovilizados/inmunología , Anticuerpos Antivirales/inmunología , Técnicas Biosensibles/instrumentación , Oro/química , Virus de la Hepatitis A/inmunología , Inmunoensayo/instrumentación , Inmunoensayo/métodos , Prueba de Estudio Conceptual , Espectrometría Raman/instrumentación , Microbiología del AguaRESUMEN
Brucella is a foodborne pathogen globally affecting both the economy and healthcare. Surface Enhanced Raman Spectroscopy (SERS) nano-biosensing can be a promising strategy for its detection. We combined high-performance quasi-crystal patterned nanocavities for Raman enhancement with the use of covalently immobilized Tbilisi bacteriophages as high-performing bio-receptors. We coupled our efficient SERS nano-biosensor to a Raman system to develop an on-field phage-based bio-sensing platform capable of monitoring the target bacteria. The developed biosensor allowed us to identify Brucella abortus in milk by our portable SERS device. Upon bacterial capture from samples (104 cells), a signal related to the pathogen recognition was observed, proving the concrete applicability of our system for on-site and in-food detection.
RESUMEN
BACKGROUND: The effects of ultraviolet B (UV-B) radiation on plants are well known and have recently attracted a great deal of attention due to the production of large quantities of secondary metabolites, which are very beneficial for human health. Recent studies have demonstrated the possibility of exploiting UV-B radiation to induce metabolic changes in fruit, vegetables, and herbs. The role of UV-B rays in inducing secondary plant metabolites is enhanced by new plastic films, which, as a result of their optical properties, permit the necessary dosage of UV-B to be transmitted into the greenhouse to stimulate such metabolites without altering the harvest. RESULTS: The main goal of the present paper is to demonstrate that, by using a greenhouse plastic film with appropriate transmittance of UV-B for rocket salad cultivation, it is possible to increase the nutraceutical elements in comparison with the same species grown in absence of such radiation. Tests compared nutritional elements extracted from rocket salad grown under greenhouses covered with several plastic films differing in UV-B transmittance. We found that rocket salad grown under plastic with 27% UV-B transmittance exhibited very high luteolin and quercetin content in comparison with rocket salad cultivated under film blocking UV-B radiation. CONCLUSIONS: Our experimental results confirm the possibility of exploiting UV-B radiation in the correct amounts by appropriate greenhouse plastic covers, to produce natural 'medicines' using the plants and to satisfy increasing consumer demand for natural health-promoting food products. © 2019 Society of Chemical Industry.
Asunto(s)
Producción de Cultivos/métodos , Plantas Medicinales/crecimiento & desarrollo , Verduras/crecimiento & desarrollo , Producción de Cultivos/instrumentación , Frutas/química , Frutas/crecimiento & desarrollo , Frutas/metabolismo , Luteolina/análisis , Luteolina/metabolismo , Plantas Medicinales/química , Plantas Medicinales/metabolismo , Plantas Medicinales/efectos de la radiación , Plásticos/análisis , Quercetina/análisis , Quercetina/metabolismo , Rayos Ultravioleta , Verduras/química , Verduras/metabolismo , Verduras/efectos de la radiaciónRESUMEN
BACKGROUND: Molecular markers for prostate cancer (PCa) are required to improve the early definition of patient outcomes. Atypically large extracellular vesicles (EVs), referred as "Large Oncosomes" (LO), have been identified in highly migratory and invasive PCa cells. We recently developed and characterized the DU145R80 subline, selected from parental DU145 cells as resistant to inhibitors of mevalonate pathway. DU145R80 showed different proteomic profile compared to parental DU145 cells, along with altered cytoskeleton dynamics and a more aggressive phenotype. METHODS: Immunofluorescence staining and western blotting were used to identify blebbing and EVs protein cargo. EVs, purified by gradient ultra-centrifugations, were analyzed by tunable resistive pulse sensing and multi-parametric flow cytometry approach coupled with high-resolution imaging technologies. LO functional effects were tested in vitro by adhesion and invasion assays and in vivo xenograft model in nude mice. Xenograft and patient tumor tissues were analyzed by immunohistochemistry. RESULTS: We found spontaneous blebbing and increased shedding of LO from DU145R80 compared to DU145 cells. LO from DU145R80, compared to those from DU145, carried increased amounts of key-molecules involved in PCa progression including integrin alpha V (αV-integrin). By incubating DU145 cells with DU145R80-derived LO we demonstrated that αV-integrin on LO surface was functionally involved in the increased adhesion and invasion of recipient cells, via AKT. Indeed either the pre-incubation of LO with an αV-integrin blocking antibody, or a specific AKT inhibition in recipient cells are able to revert the LO-induced functional effects. Moreover, DU145R80-derived LO also increased DU145 tumor engraftment in a mice model. Finally, we identified αV-integrin positive LO-like structures in tumor xenografts as well as in PCa patient tissues. Increased αV-integrin tumor expression correlated with high Gleason score and lymph node status. CONCLUSIONS: Overall, this study is the first to demonstrate the critical role of αV-integrin positive LO in PCa aggressive features, adding new insights in biological function of these large EVs and suggesting their potential use as PCa prognostic markers.
Asunto(s)
Vesículas Extracelulares/patología , Integrina alfaV/metabolismo , Neoplasias de la Próstata/patología , Proteínas Proto-Oncogénicas c-akt/metabolismo , Animales , Adhesión Celular , Línea Celular Tumoral , Transición Epitelial-Mesenquimal , Vesículas Extracelulares/metabolismo , Regulación Neoplásica de la Expresión Génica , Humanos , Masculino , Ratones , Ratones Desnudos , Clasificación del Tumor , Invasividad Neoplásica , Trasplante de Neoplasias , Neoplasias de la Próstata/metabolismo , Proteómica/métodos , Regulación hacia ArribaRESUMEN
Plasmonic quasi-periodic structures are well-known to exhibit several surprising phenomena with respect to their periodic counterparts, due to their long-range order and higher rotational symmetry. Thanks to their specific geometrical arrangement, plasmonic quasi-crystals offer unique possibilities in tailoring the coupling and propagation of surface plasmons through their lattice, a scenario in which a plethora of fascinating phenomena can take place. In this paper we investigate the extraordinary transmission phenomenon occurring in specifically patterned Thue-Morse nanocavities, demonstrating noticeable enhanced transmission, directly revealed by near-field optical experiments, performed by means of a scanning near-field optical microscope (SNOM). SNOM further provides an intuitive picture of confined plasmon modes inside the nanocavities and confirms that localization of plasmon modes is based on size and depth of nanocavities, while cross talk between close cavities via propagating plasmons holds the polarization response of patterned quasi-crystals. Our performed numerical simulations are in good agreement with the experimental results. Thus, the control on cavity size and incident polarization can be used to alter the intensity and spatial properties of confined cavity modes in such structures, which can be exploited in order to design a plasmonic device with customized optical properties and desired functionalities, to be used for several applications in quantum plasmonics.
RESUMEN
The development of fast and ultrasensitive methods to detect bacterial pathogens at low concentrations is of high relevance for human and animal health care and diagnostics. In this context, surface-enhanced Raman scattering (SERS) offers the promise of a simplified, rapid, and high-sensitive detection of biomolecular interactions with several advantages over previous assay methodologies. In this work, we have conceived reproducible SERS nanosensors based on tailored multilayer octupolar nanostructures which can combine high enhancement factor and remarkable molecular selectivity. We show that coating novel multilayer octupolar metastructures with proper self-assembled monolayer (SAM) and immobilized phages can provide label-free analysis of pathogenic bacteria via SERS leading to a giant increase in SERS enhancement. The strong relative intensity changes of about 2100% at the maximum scattered SERS wavelength, induced by the Brucella bacterium captured, demonstrate the performance advantages of the bacteriophage sensing scheme. We performed measurements at the single-cell level thus allowing fast identification in less than an hour without any demanding sample preparation process. Our results based on designing well-controlled octupolar coupling platforms open up new opportunities toward the use of bacteriophages as recognition elements for the creation of SERS-based multifunctional biochips for rapid culture and label-free detection of bacteria.