(NHC-olefin)-nickel(0) nanoparticles as catalysts for the (Z)-selective semi-hydrogenation of alkynes and ynamides.

Nickel(0) nanoparticles coordinated to NHC ligands bearing N-coordinated cinnamyl moieties were readily prepared by reduction of a [NiCpBr(NHC-cinnamyl)] complex with methyl magnesium bromide. The combination of a strong σ-donor NHC ligand with a π-coordinating appended cinnamyl moiety likely prevents nickel(0) nanoparticle aggregation to larger inactive species, and allows the effective and (Z)-selective semi-hydrogenation of alkynes and ynamides.

Bidentate Donor-Functionalized N-Heterocyclic Carbenes: Valuable Ligands for Ruthenium-Catalyzed Transfer Hydrogenation.

Ruthenium complexes are by far the most studied compounds that catalyze hydrogen transfer reactions. In this review, we describe the use in this field of ruthenium complexes bearing bidentate donor-functionalized N-heterocyclic carbene ligands. The review specifically covers the application in transfer hydrogenations of (k2-CNHC,Y)-ruthenacyclic compounds where the Y donor atom is a N, P, O, or S atom, and where the N-heterocyclic carbene ligand is a classical imidazol-2-ylidene, a benzimidazol-2-ylidene, a mesoionic 1,2,3-triazolylidene, or an imidazol-4-ylidene ligand. Tridentate donor-functionalized N-heterocyclic carbene complexes thus fall outside the scope of the review. Applications in (asymmetric) transfer hydrogenation of ketones, aldehydes, imines, alkenes, and nitrobenzene are discussed.

Ruthenacycles and Iridacycles as Transfer Hydrogenation Catalysts.

In this review, we describe the synthesis and use in hydrogen transfer reactions of ruthenacycles and iridacycles. The review limits itself to metallacycles where a ligand is bound in bidentate fashion to either ruthenium or iridium via a carbon-metal sigma bond, as well as a dative bond from a heteroatom or an N-heterocyclic carbene. Pincer complexes fall outside the scope. Described are applications in (asymmetric) transfer hydrogenation of aldehydes, ketones, and imines, as well as reductive aminations. Oxidation reactions, i.e., classical Oppenauer oxidation, which is the reverse of transfer hydrogenation, as well as dehydrogenations and oxidations with oxygen, are described. Racemizations of alcohols and secondary amines are also catalyzed by ruthenacycles and iridacycles.

CO2 Capture by Hydroxylated Azine-Based Covalent Organic Frameworks.

Covalent organic frameworks (COFs) RIO-13, RIO-12, RIO-11, and RIO-11m were investigated towards their CO2 capture properties by thermogravimetric analysis at 1 atm and 40 °C. These microporous COFs bear in common the azine backbone composed of hydroxy-benzene moieties but differ in the relative number of hydroxyl groups present in each material. Thus, their sorption capacities were studied as a function of their textural and chemical properties. Their maximum CO2 uptake values showed a strong correlation with an increasing specific surface area, but that property alone could not fully explain the CO2 uptake data. Hence, the specific CO2 uptake, combined with DFT calculations, indicated that the relative number of hydroxyl groups in the COF backbone acts as an adsorption threshold, as the hydroxyl groups were indeed identified as relevant adsorption sites in all the studied COFs. Additionally, the best performing COF was thoroughly investigated, experimentally and theoretically, for its CO2 capture properties in a variety of CO2 concentrations and temperatures, and showed excellent isothermal recyclability up to 3 cycles.

Hydroboration of Alkenes Catalysed by a Nickel N-Heterocyclic Carbene Complex: Reaction and Mechanistic Aspects.

The pentamethylcyclopentadienyl N-heterocyclic carbene nickel complex [Ni(η5 -C5 Me5 )Cl(IMes)] (IMes=1,3-dimesitylimidazol-2-ylidene) efficiently catalyses the anti-Markovnikov hydroboration of alkenes with catecholborane in the presence of a catalytic amount of potassium tert-butoxide, and joins the very exclusive club of nickel catalysts for this important transformation. Interestingly, the regioselectivity can be reversed in some cases by using pinacolborane instead of catecholborane. Mechanistic investigations involving control experiments, 1 H and 11 B NMR spectroscopy, cyclic voltammetry, piezometric measurements and DFT calculations suggest an initial reduction of the NiII precursor to a NiI active species with the concomitant release of H2 . The crucial role of the alkoxo-catecholato-borohydride species resulting from the reaction of potassium tert-butoxide with catecholborane in the formation of an intermediate nickel-hydride species that would then be reduced to the NiI active species, is highlighted.

Design, Synthesis and Characterization of Nickel-Functionalized Covalent Organic Framework NiCl@RIO-12 for Heterogeneous Suzuki-Miyaura Catalysis.

A series of nickel-decorated covalent organic frameworks, NiCl@RIO-12, were prepared using the post-synthetic modification strategy, that is, by reacting NiCl2 with pristine RIO-12 under alkaline conditions. Interestingly, they retained their crystallinity and the amount of nickel incorporated could be tuned from 3.6 to 25 wt % according to the reaction conditions. The incorporation of a higher amount of nickel in NiCl@RIO-12 consistently led to a lower Brunauer-Emmett-Teller surface area. Additionally, no agglomeration of nickel particles was found and a relatively homogeneous dispersion of nickel could be ascertained by SEM and TEM-EDS. The paramagnetic material exhibited promising catalytic activity in Suzuki-Miyaura cross-coupling under microwave heating. Thus, NiCl@RIO-12 notably demonstrated good thermal stability and its recyclability showed no substantial loss of activity after 3 cycles.

Coating of polydopamine on polyurethane open cell foams to design soft structured supports for molecular catalysts.

Polydopamine-coated polyurethane open cell foams are used as structured supports for molecular catalysts through the covalent anchoring of alkoxysilyl arms by the catechol groups of the mussel-inspired layer. This strong bonding prevents their leaching. No alteration of the mechanical properties of the flexible support is observed after repeated uses of the catalytic materials.

Synthesis, characterization, and catalytic application in aldehyde hydrosilylation of half-sandwich nickel complexes bearing (κ1-C)- and hemilabile (κ2-C,S)-thioether-functionalised NHC ligands.

Neutral nickel-N-heterocyclic carbene complexes, (κ1-C)-[NiCpBr{R-NHC-(CH2)2SR'}] [Cp = η5-C5H5; R-NHC-(CH2)2SR' = 1-mesityl-3-[2-(tert-butylthio)ethyl]- (1a), 1-mesityl-3-[2-(phenylthio)ethyl]- (1b), 1-benzyl-3-[2-(tert-butylthio)ethyl]- (1c), 1-benzyl-3-[2-(phenylthio)ethyl]-imidazol-2-ylidene (1d)], which bear a N-bound thioether side arm, were prepared by the reaction of nickelocene with the corresponding imidazolium bromides [R-NHC-(CH2)2SR'·HBr] (a-d), via conventional or microwave heating. The 1H NMR spectra of the benzyl-substituted species 1c and 1d showed signals for diastereotopic NCH2CH2S protons at room temperature. However, structural studies established the absence of coordination of the sulphur atom in the solid state, and solvent DFT calculations showed that bromide displacement by sulphur is an unfavourable process (ΔG = +13.5 kcal mol-1 for 1d), thereby suggesting that the observed disatereotopicity is more likely due to significant steric congestion rather than to a possible C,S-chelation in solution. Treatment of these complexes with KPF6 in tetrahydrofuran (THF) led to bromide abstraction to afford the cationic complexes [NiCp{R-NHC-(CH2)2SR'}](PF6) (2a-c). Alternatively, 2a-c could also be prepared by the direct reaction of nickelocene with the corresponding imidazolium hexafluorophosphate salts [R-NHC-(CH2)2SR'·HPF6]. Inversely to the neutral species, whereas X-ray crystallography established C,S-chelation in the solid state, the 1H NMR spectra (CDCl3, CD2Cl2, or thf-d8) at room temperature showed no diastereotopic NCH2CH2S protons, thus suggesting the possible displacement of the sulphur atom by the respective solvents and/or very fast sulphur inversion. DFT calculations established a low energy inversion process in all cases (+9 ≤ΔG‡≤ +13 kcal mol-1) as well as a favourable solvent coordination process (ΔG‡≈ +11 kcal mol-1; ΔG≈-7 kcal mol-1) with a solvent such as THF, thus suggesting that sulphur inversion and/or solvent coordination can both account for the absence of diastereotopy at room temperature, depending on the solvent. While all complexes catalysed the hydrosilylation of benzaldehyde in the absence of any additive, the cationic C,S-chelated complexes 2 proved more active than the sterically constrained neutral species 1. In particular, 2c proved to be the most active pre-catalyst and its catalytic charge could be lowered down to 2 mol% with PhSiH3 as the hydrogen source.

Displacement of η5-cyclopentadienyl ligands from half-sandwich C,C-(NHC-cyanoalkyl)-nickel(ii) metallacycles: further insight into the structure of the resulting Cp-free nickelacycles and a catalytic activity study.

Four cationic C,C-(NHC-cyanoalkyl)-nickel(ii) metallacyclic complexes, [Ni{Me-NHC-CH2CH(CN)}(NCMe)](PF6) (2a), [Ni{Mes-NHC-CH2CH(CN)}(NCMe)](PF6) (2b), [Ni{Mes-NHC-(CH2)2CH(CN)}(NCMe)](PF6) (2c) and [Ni{DiPP-NHC-(CH2)2CH(CN)}(NCMe)](PF6) (2d), were prepared by the removal of the Cp ligand under acidic conditions at 0 °C from the corresponding half-sandwich nickelacycles [NiCp{R-NHC-(CH2)nCH(CN)}] (1a-1d; Cp = η5-C5H5; n = 1 or 2; R-NHC-(CH2)nCH(CN) = 1-R-3-[(CH2)nCH(CN)]-imidazol-2-ylidene). Full characterization of 2a-d by 1H and 13C{1H} NMR spectroscopy in CD3CN and pyridine-d5, ATR-FTIR spectroscopy, mass spectrometry, and CHN microanalyses established the presence of only one acetonitrile ligand per nickel atom in the solid state. A DFT structural study conducted on the cations of the methyl-substituted 5-membered nickelacycle 2a and the mesityl-substituted 6-membered cycle 2c found a small energetic cost (ΔG = 7-12 kcal mol-1) for the loss of one acetonitrile ligand from the square-planar structures existing in solution, that should be easily amenable upon solvent evaporation (ΔG‡ = 14 kcal mol-1 in the case of 2c). Two structures with one acetonitrile ligand could be optimized in both cases: (i) a truly T-shaped 14-electron structure with an end-on acetonitrile ligand, and (ii) a masked T-shaped structure stabilized by the π-coordination of the dangling CN group of the metallated alkyl chain, the latter being favoured by 2.4 kcal mol-1 in the case of the flexible 6-membered ring 2c. A comparison of calculated vibrational frequencies with experimental FTIR spectra ruled out π-coordination of the dangling CN group as a ν(C[triple bond, length as m-dash]N) band at low frequency was absent. Complexes 2a-d thus probably exist as rare three-coordinate T-shaped 14-electron species in the solid state. Their catalytic activity was studied for the direct arylation of azoles, and 2c proved to be moderately active for the coupling of benzothiazole with aryl iodides. Mechanistic insights suggest that competing processes or a radical process catalysed by nickel particles could follow an initial reduction of 2c by the dimerization of a sacrificial amount of benzothiazole.

Polydopamine-coated open cell polyurethane foams as an inexpensive, flexible yet robust catalyst support: a proof of concept.

Commercially available polyurethane open cell foams are readily coated with mussel-inspired polydopamine. The polydopamine film allows robust immobilisation of TiO2 nanoparticles at the surface of the three-dimensional material. The resulting catalyst is efficient for the photo-degradation of an azo dye, reusable and highly resistant to mechanical stress. A novel type of robust structured catalytic support, easily accessible via an inexpensive and green process, is thus described.

From acetone metalation to the catalytic α-arylation of acyclic ketones with NHC-nickel(II) complexes.

Air-stable N-heterocyclic carbene-nickel(ii) complexes at concentrations as low as 1 mol% exhibit high catalytic activity for the α-arylation of acyclic ketones and join a highly restricted list of nickel catalysts for this key reaction. Mechanistic investigations suggest a radical pathway.

One-step synthesis of a highly homogeneous SBA-NHC hybrid material: en route to single-site NHC-metal heterogeneous catalysts with high loadings.

The one-step synthesis of a mesoporous silica of SBA type, functionalized with a 1-(2,6-diisopropylphenyl)-3-propyl-imidazolium (iPr2Ar-NHC-propyl) cation located in the pore channels, is described. This material was obtained by the direct hydrolysis and co-condensation of tetraethylorthosilicate (TEOS) and 1-(2,6-diisopropylphenyl)-3-[3-(triethoxysilyl)propyl]-imidazolium iodide in the presence of Pluronic P123 as a non-ionic structure-directing agent and aqueous HCl (37%) as an acid catalyst. Small-angle X-ray diffraction measurements, scanning and transmission electron microscopies, as well as dinitrogen sorption analyses revealed that the synthesized material is highly mesoporous with a 2D hexagonal arrangement of the porous network. (13)C and (29)Si CP-MAS NMR spectroscopy confirmed that the material contains intact iPr2Ar-NHC-propyl cations, which are covalently anchored via silicon atoms fused into the silica matrix. Moreover, comparison of the latter data with those of an analogous post-synthetic grafted SBA-NHC material allowed us to establish that, as expected, (i) it is most probably more homogeneous and (ii) it shows a more robust anchoring of the organic units. Finally, elemental mapping by energy dispersive X-ray spectroscopy in the scanning electron microscope demonstrated a very homogeneous distribution of the imidazolium units within the one-pot material, moreover with a high content. This study thus demonstrates that a relatively bulky and hydrophilic imidazolium unit can be directly co-condensed with TEOS in the presence of a structure-directing agent to provide in a single step a highly ordered and homogeneous mesoporous hybrid SBA-NHC material, possessing a significant number of cationic NHC sites.

Facile displacement of η5-cyclopentadienyl ligands from half-sandwich alkyl,NHC-nickel complexes: an original route to robust cis-C,C-nickel square planar complexes.

The η(5)-cyclopentadienyl (Cp) ligands of 18-electron half-sandwich alkyl,NHC-nickel complexes are readily displaced under acidic conditions to afford a novel class of cis-C,C-nickel square planar complexes. Remarkably, the nickel-alkyl and nickel-carbene bonds are not ruptured in these unprecedented Cp acidolysis reactions.

C-H activation of acetonitrile at nickel: ligand flip and conversion of N-bound acetonitrile into a C-bound cyanomethyl ligand.

Nickel joins the fairly exclusive list of metals that can activate nitrile C-H bonds. We report the first example of the C-H activation of an acetonitrile ligand on a nickel center. The acetonitrile ligand formally loses a proton and undergoes a sharp flip to give a cyanomethyl ligand that is coordinated to the nickel atom. Structures of an initial N-bound acetonitrile-nickel complex and of a final cyanomethyl-nickel complex are both presented.

Half-sandwich NHC-nickel(II) complexes as pre-catalysts for the fast Suzuki coupling of aryl halides: a comparative study.

Cationic half-sandwich nickel complexes of general formula [Ni(NHC)(NCMe)(eta(5)-C5R5)](PF6) [NHC = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene (IPr) a, 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene (IMes) b; R = H, Me] were prepared from the reaction of their neutral homologues [Ni(NHC)Cl(eta(5)-C5R5)] with 1 equiv. of KPF6 in acetonitrile at room temperature. The new cationic complexes [Ni(IPr)(NCMe)(eta(5)-C5Me5)](PF6) 3a, [Ni(IMes)(NCMe)(eta(5)-C5Me5)](PF6) 3b and [Ni(IMes)(NCMe)(eta(5)-C5H5)](PF6) 4b were obtained in high yield and were fully characterized by 1H and 13C NMR spectroscopy, IR spectroscopy, elemental analyses, and in the case of 3a by a single-crystal X-ray diffraction study. The neutral analogue of 3a, [Ni(IPr)Cl(eta(5)-C5Me5)] 1a was also structurally characterized. Their geometries were compared and no significant structural differences were observed. Nevertheless solution NMR spectroscopy established that the acetonitrile ligand of the cationic species is labile in solution. This results in the absence of any rotational significant barrier about the nickel-carbene carbon bond at ambient temperature in solution in the sterically congested cationic complexes 3a and 3b, in contrast to their neutral analogues 1a and [Ni(IMes)Cl(eta(5)-C5Me5)] 1b. The neutral and the cationic complexes catalyzed the cross-coupling of phenylboronic acid with aryl halides in the absence of co-catalysts or reductants. Surprisingly, the neutral or cationic nature of the complexes proved to have almost no influence on the reaction yields and rates. However, complexes bearing the bulky electron-rich pentamethylcyclopentadienyl ligand were much more active than those bearing the cyclopentadienyl ligand, and TOF of up to 190 h(-1), a high rate for nickel(II) complexes under similar conditions, were observed with these species.

Fast racemisation of chiral amines and alcohols by using cationic half-sandwich ruthena- and iridacycle catalysts.

The lipase-catalysed resolution of alcohols and amines yields only 50 % of the desired enantiopure product. However, addition of a racemisation catalyst leads to 100 % yield in what is called a dynamic kinetic resolution (DKR). There is a need for new racemisation catalysts that are fast and compatible with the conditions of the enzymatic reaction. We show that cationic half-sandwich ruthena- and iridacycle complexes are highly active and efficient in the racemisation of chiral alcohols and amines. Upon activation with base, these complexes are able to selectively racemise alcohols, whereas the non-activated complexes are selective catalysts for the racemisation of amines. We have applied the iridacycles in the DKR of racemic beta-chloroalcohols to produce chiral epoxides in a biphasic system in good yields and high ee (ee=enantiomeric excess).

Dynamic kinetic resolution of racemic beta-haloalcohols: direct access to enantioenriched epoxides.

The direct chemo-enzymatic DKR of racemic beta-haloalcohols is reported, yielding the corresponding optically active epoxides in a single step. The mutant haloalcohol dehalogenase HheC Cys153Ser Trp249Phe is used for the asymmetric ring closure, whereas racemization of the remaining enantiomer of the haloalcohol is achieved using the new iridacycle 3, one of the most effective racemization catalysts to date for beta-haloalcohols.

Unsaturated dinickel-molybdenum clusters with N-heterocyclic carbene ligands.

The first examples of mixed metal trinuclear clusters carrying N-heterocyclic carbene (NHC) ligands were isolated from reactions of the complexes [Ni(NHC)ClCp] [NHC = bis-(2,6-diisopropylphenyl)- or bis-(2,4,6-trimethylphenyl)-imidazol-2-ylidene] with [Mo(CO)(3)Cp](-); the unsaturated 46-electron clusters have triangular MoNi(2) cores and the reaction pathway activates usually inert Ni-Cp and Ni-NHC bonds.

Cycloruthenated primary and secondary amines as efficient catalyst precursors for asymmetric transfer hydrogenation.

[reaction: see text] Ruthenacycles obtained by cyclometalation of enantiopure aromatic primary or secondary amines with [(eta6-benzene)RuCl2]2 or with [(eta6-p-cymene)RuCl2]2 are efficient catalysts for asymmetric transfer hydrogenation (TOF up to 190 h(-1) at room temperature). Enantioselectivities in the transfer hydrogenation of acetophenone ranged from 38% to 89%. It is possible to prepare the catalysts in situ, which allows the use of high throughput experimentation.